/* Hey Emacs use -*- mode: C -*- */ /* * Copyright (c) 2016 Cisco and/or its affiliates. * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /** \file This file defines the vpp control-plane API messages used to control the ACL plugin */ /** \brief Get the plugin version @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define acl_plugin_get_version { u32 client_index; u32 context; }; /** \brief Reply to get the plugin version @param context - returned sender context, to match reply w/ request @param major - Incremented every time a known breaking behavior change is introduced @param minor - Incremented with small changes, may be used to avoid buggy versions */ define acl_plugin_get_version_reply { u32 context; u32 major; u32 minor; }; /** \brief Access List Rule entry @param is_permit - deny (0), permit (1), or permit+reflect(2) action on this rule. @param is_ipv6 - IP addresses in this rule are IPv6 (1) or IPv4 (0) @param src_ip_addr - Source prefix value @param src_ip_prefix_len - Source prefix length @param dst_ip_addr - Destination prefix value @param dst_ip_prefix_len - Destination prefix length @param proto - L4 protocol (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml) @param srcport_or_icmptype_first - beginning of source port or ICMP4/6 type range @param srcport_or_icmptype_last - end of source port or ICMP4/6 type range @param dstport_or_icmpcode_first - beginning of destination port or ICMP4/6 code range @param dstport_or_icmpcode_last - end of destination port or ICMP4/6 code range @param tcp_flags_mask - if proto==6, match masked TCP flags with this value @param tcp_flags_value - if proto==6, mask to AND the TCP flags in the packet with */ typeonly manual_print define acl_rule { u8 is_permit; u8 is_ipv6; u8 src_ip_addr[16]; u8 src_ip_prefix_len; u8 dst_ip_addr[16]; u8 dst_ip_prefix_len; /* * L4 protocol. IANA number. 1 = ICMP, 58 = ICMPv6, 6 = TCP, 17 = UDP. * 0 => ignore L4 and ignore the ports/tcpflags when matching. */ u8 proto; /* * If the L4 protocol is TCP or UDP, the below * hold ranges of ports, else if the L4 is ICMP/ICMPv6 * they hold ranges of ICMP(v6) types/codes. * * Ranges are inclusive, i.e. to match "any" TCP/UDP port, * use first=0,last=65535. For ICMP(v6), * use first=0,last=255. */ u16 srcport_or_icmptype_first; u16 srcport_or_icmptype_last; u16 dstport_or_icmpcode_first; u16 dstport_or_icmpcode_last; /* * for proto = 6, this matches if the * TCP flags in the packet, ANDed with tcp_flags_mask, * is equal to tcp_flags_value. */ u8 tcp_flags_mask; u8 tcp_flags_value; }; /** \brief MACIP Access List Rule entry @param is_permit - deny (0), permit (1) action on this rule. @param is_ipv6 - IP addresses in this rule are IPv6 (1) or IPv4 (0) @param src_mac - match masked source MAC address against this value @param src_mac_mask - AND source MAC address with this value before matching @param src_ip_addr - Source prefix value @param src_ip_prefix_len - Source prefix length */ typeonly manual_print define macip_acl_rule { u8 is_permit; u8 is_ipv6; /* * The source mac of the packet ANDed with src_mac_mask. * The source ip[46] address in the packet is matched * against src_ip_addr, with src_ip_prefix_len set to 0. * * For better performance, minimize the number of * (src_mac_mask, src_ip_prefix_len) combinations * in a MACIP ACL. */ u8 src_mac[6]; u8 src_mac_mask[6]; u8 src_ip_addr[16]; u8 src_ip_prefix_len; }; /** \brief Replace an existing ACL in-place or create a new ACL @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param acl_index - an existing ACL entry (0..0xfffffffe) to replace, or 0xffffffff to make new ACL @param tag - a string value stored along with the ACL, for descriptive purposes @param count - number of ACL rules @r - Rules for this access-list */ manual_print manual_endian define acl_add_replace { u32 client_index; u32 context; u32 acl_index; /* ~0 to add, existing ACL# to replace */ u8 tag[64]; /* What gets in here gets out in the corresponding tag field when dumping the ACLs. */ u32 count; vl_api_acl_rule_t r[count]; }; /** \brief Reply to add/replace ACL @param context - returned sender context, to match reply w/ request @param acl_index - index of the updated or newly created ACL @param retval 0 - no error */ define acl_add_replace_reply { u32 context; u32 acl_index; i32 retval; }; /** \brief Delete an ACL @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param acl_index - ACL index to delete */ manual_print define acl_del { u32 client_index; u32 context; u32 acl_index; }; /** \brief Reply to delete the ACL @param context - returned sender context, to match reply w/ request @param retval 0 - no error */ define acl_del_reply { u32 context; i32 retval; }; /* acl_interface_add_del(_reply) to be deprecated in lieu of acl_interface_set_acl_list */ /** \brief Use acl_interface_set_acl_list instead Append/remove an ACL index to/from the list of ACLs checked for an interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add or delete the ACL index from the list @param is_input - check the ACL on input (1) or output (0) @param sw_if_index - the interface to alter the list of ACLs on @param acl_index - index of ACL for the operation */ manual_print define acl_interface_add_del { u32 client_index; u32 context; u8 is_add; /* * is_input = 0 => ACL applied on interface egress * is_input = 1 => ACL applied on interface ingress */ u8 is_input; u32 sw_if_index; u32 acl_index; }; /** \brief Reply to alter the ACL list @param context - returned sender context, to match reply w/ request @param retval 0 - no error */ define acl_interface_add_del_reply { u32 context; i32 retval; }; /** \brief Set the vector of input/output ACLs checked for an interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - the interface to alter the list of ACLs on @param count - total number of ACL indices in the vector @param n_input - this many first elements correspond to input ACLs, the rest - output @param acls - vector of ACL indices */ manual_print define acl_interface_set_acl_list { u32 client_index; u32 context; u32 sw_if_index; u8 count; u8 n_input; /* First n_input ACLs are set as a list of input ACLs, the rest are applied as output */ u32 acls[count]; }; /** \brief Reply to set the ACL list on an interface @param context - returned sender context, to match reply w/ request @param retval 0 - no error */ define acl_interface_set_acl_list_reply { u32 context; i32 retval; }; /** \brief Dump the specific ACL contents or all of the ACLs' contents @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param acl_index - ACL index to dump, ~0 to dump all ACLs */ define acl_dump { u32 client_index; u32 context; u32 acl_index; /* ~0 for all ACLs */ }; /** \brief Details about a single ACL contents @param context - returned sender context, to match reply w/ request @param acl_index - ACL index whose contents are being sent in this message @param tag - Descriptive tag value which was supplied at ACL creation @param count - Number of rules in this ACL @param r - Array of rules within this ACL */ manual_endian manual_print define acl_details { u32 context; u32 acl_index; u8 tag[64]; /* Same blob that was supplied to us when creating the ACL, one hopes. */ u32 count; vl_api_acl_rule_t r[count]; }; /** \brief Dump the list(s) of ACL applied to specific or all interfaces @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface to dump the ACL list for */ define acl_interface_list_dump { u32 client_index; u32 context; u32 sw_if_index; /* ~0 for all interfaces */ }; /** \brief Details about a single ACL contents @param context - returned sender context, to match reply w/ request @param sw_if_index - interface for which the list of ACLs is applied @param count - total length of acl indices vector @param n_input - this many of indices in the beginning are input ACLs, the rest - output @param acls - the vector of ACL indices */ define acl_interface_list_details { u32 context; u32 sw_if_index; u8 count; u8 n_input; u32 acls[count]; }; /** \brief Add a MACIP ACL @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param tag - descriptive value for this MACIP ACL @param count - number of rules in this ACL @param r - vector of MACIP ACL rules */ manual_endian manual_print define macip_acl_add { u32 client_index; u32 context; u8 tag[64]; u32 count; vl_api_macip_acl_rule_t r[count]; }; /** \brief Reply to add MACIP ACL @param context - returned sender context, to match reply w/ request @param acl_index - index of the newly created ACL @param retval 0 - no error */ define macip_acl_add_reply { u32 context; u32 acl_index; i32 retval; }; /** \brief Delete a MACIP ACL @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param acl_index - MACIP ACL index to delete */ manual_print define macip_acl_del { u32 client_index; u32 context; u32 acl_index; }; /** \brief Reply to delete the MACIP ACL @param context - returned sender context, to match reply w/ request @param retval 0 - no error */ define macip_acl_del_reply { u32 context; i32 retval; }; /** \brief Add or delete a MACIP ACL to/from interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add (1) or delete (0) ACL from being used on an interface @param sw_if_index - interface to apply the action to @param acl_index - MACIP ACL index */ manual_print define macip_acl_interface_add_del { u32 client_index; u32 context; u8 is_add; /* macip ACLs are always input */ u32 sw_if_index; u32 acl_index; }; /** \brief Reply to apply/unapply the MACIP ACL @param context - returned sender context, to match reply w/ request @param retval 0 - no error */ define macip_acl_interface_add_del_reply { u32 context; i32 retval; }; /** \brief Dump one or all defined MACIP ACLs @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param acl_index - MACIP ACL index or ~0 to dump all ACLs */ define macip_acl_dump { u32 client_index; u32 context; u32 acl_index; /* ~0 for all ACLs */ }; /** \brief Details about one MACIP ACL @param context - returned sender context, to match reply w/ request @param acl_index - index of this MACIP ACL @param tag - descriptive tag which was supplied during the creation @param count - length of the vector of MACIP ACL rules @param r - rules comprising this ACL */ manual_endian manual_print define macip_acl_details { u32 context; u32 acl_index; u8 tag[64]; u32 count; vl_api_macip_acl_rule_t r[count]; }; /** \brief Get the vector of MACIP ACL IDs applied to the interfaces @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define macip_acl_interface_get { u32 client_index; u32 context; }; /** \brief Reply with the vector of MACIP ACLs by sw_if_index @param context - returned sender context, to match reply w/ request @param count - total number of elements in the vector @param acls - the vector of active MACACL indices per sw_if_index */ define macip_acl_interface_get_reply { u32 context; u32 count; u32 acls[count]; };