/* * l2_bd.c : layer 2 bridge domain * * Copyright (c) 2013 Cisco and/or its affiliates. * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /** * @file * @brief Ethernet Bridge Domain. * * Code in this file manages Layer 2 bridge domains. * */ bd_main_t bd_main; /** Init bridge domain if not done already. For feature bitmap, set all bits except ARP termination */ void bd_validate (l2_bridge_domain_t * bd_config) { if (!bd_is_valid (bd_config)) { bd_config->feature_bitmap = ~L2INPUT_FEAT_ARP_TERM; bd_config->bvi_sw_if_index = ~0; bd_config->members = 0; bd_config->flood_count = 0; bd_config->tun_master_count = 0; bd_config->tun_normal_count = 0; bd_config->mac_by_ip4 = 0; bd_config->mac_by_ip6 = hash_create_mem (0, sizeof (ip6_address_t), sizeof (uword)); } } u32 bd_find_or_add_bd_index (bd_main_t * bdm, u32 bd_id) { uword *p; u32 rv; if (bd_id == ~0) { bd_id = 0; while (hash_get (bdm->bd_index_by_bd_id, bd_id)) bd_id++; } else { p = hash_get (bdm->bd_index_by_bd_id, bd_id); if (p) return (p[0]); } rv = clib_bitmap_first_clear (bdm->bd_index_bitmap); /* mark this index busy */ bdm->bd_index_bitmap = clib_bitmap_set (bdm->bd_index_bitmap, rv, 1); hash_set (bdm->bd_index_by_bd_id, bd_id, rv); vec_validate (l2input_main.bd_configs, rv); l2input_main.bd_configs[rv].bd_id = bd_id; return rv; } int bd_delete_bd_index (bd_main_t * bdm, u32 bd_id) { uword *p; u32 bd_index; p = hash_get (bdm->bd_index_by_bd_id, bd_id); if (p == 0) return -1; bd_index = p[0]; /* mark this index clear */ bdm->bd_index_bitmap = clib_bitmap_set (bdm->bd_index_bitmap, bd_index, 0); hash_unset (bdm->bd_index_by_bd_id, bd_id); l2input_main.bd_configs[bd_index].bd_id = ~0; l2input_main.bd_configs[bd_index].feature_bitmap = 0; l2fib_flush_bd_mac (vlib_get_main (), bd_index); return 0; } static void update_flood_count (l2_bridge_domain_t * bd_config) { bd_config->flood_count = vec_len (bd_config->members) - (bd_config->tun_master_count ? bd_config->tun_normal_count : 0); } void bd_add_member (l2_bridge_domain_t * bd_config, l2_flood_member_t * member) { u32 ix; vnet_sw_interface_t *sw_if = vnet_get_sw_interface (vnet_get_main (), member->sw_if_index); /* * Add one element to the vector * vector is ordered [ bvi, normal/tun_masters..., tun_normals... ] * When flooding, the bvi interface (if present) must be the last member * processed due to how BVI processing can change the packet. To enable * this order, we make the bvi interface the first in the vector and * flooding walks the vector in reverse. */ switch (sw_if->flood_class) { case VNET_FLOOD_CLASS_TUNNEL_MASTER: bd_config->tun_master_count++; /* Fall through */ default: /* Fall through */ case VNET_FLOOD_CLASS_NORMAL: ix = (member->flags & L2_FLOOD_MEMBER_BVI) ? 0 : vec_len (bd_config->members) - bd_config->tun_normal_count; break; case VNET_FLOOD_CLASS_TUNNEL_NORMAL: ix = vec_len (bd_config->members); bd_config->tun_normal_count++; break; } vec_insert_elts (bd_config->members, member, 1, ix); update_flood_count (bd_config); } #define BD_REMOVE_ERROR_OK 0 #define BD_REMOVE_ERROR_NOT_FOUND 1 u32 bd_remove_member (l2_bridge_domain_t * bd_config, u32 sw_if_index) { u32 ix; /* Find and delete the member */ vec_foreach_index (ix, bd_config->members) { l2_flood_member_t *m = vec_elt_at_index (bd_config->members, ix); if (m->sw_if_index == sw_if_index) { vnet_sw_interface_t *sw_if = vnet_get_sw_interface (vnet_get_main (), sw_if_index); if (sw_if->flood_class != VNET_FLOOD_CLASS_NORMAL) { if (sw_if->flood_class == VNET_FLOOD_CLASS_TUNNEL_MASTER) bd_config->tun_master_count--; else if (sw_if->flood_class == VNET_FLOOD_CLASS_TUNNEL_NORMAL) bd_config->tun_normal_count--; } vec_delete (bd_config->members, 1, ix); update_flood_count (bd_config); return BD_REMOVE_ERROR_OK; } } return BD_REMOVE_ERROR_NOT_FOUND; } clib_error_t * l2bd_init (vlib_main_t * vm) { bd_main_t *bdm = &bd_main; u32 bd_index; bdm->bd_index_by_bd_id = hash_create (0, sizeof (uword)); /* * create a dummy bd with bd_id of 0 and bd_index of 0 with feature set * to packet drop only. Thus, packets received from any L2 interface with * uninitialized bd_index of 0 can be dropped safely. */ bd_index = bd_find_or_add_bd_index (bdm, 0); ASSERT (bd_index == 0); l2input_main.bd_configs[0].feature_bitmap = L2INPUT_FEAT_DROP; return 0; } VLIB_INIT_FUNCTION (l2bd_init); /** Set the learn/forward/flood flags for the bridge domain. Return 0 if ok, non-zero if for an error. */ u32 bd_set_flags (vlib_main_t * vm, u32 bd_index, u32 flags, u32 enable) { l2_bridge_domain_t *bd_config; u32 feature_bitmap = 0; vec_validate (l2input_main.bd_configs, bd_index); bd_config = vec_elt_at_index (l2input_main.bd_configs, bd_index); bd_validate (bd_config); if (flags & L2_LEARN) { feature_bitmap |= L2INPUT_FEAT_LEARN; } if (flags & L2_FWD) { feature_bitmap |= L2INPUT_FEAT_FWD; } if (flags & L2_FLOOD) { feature_bitmap |= L2INPUT_FEAT_FLOOD; } if (flags & L2_UU_FLOOD) { feature_bitmap |= L2INPUT_FEAT_UU_FLOOD; } if (flags & L2_ARP_TERM) { feature_bitmap |= L2INPUT_FEAT_ARP_TERM; } if (enable) { bd_config->feature_bitmap |= feature_bitmap; } else { bd_config->feature_bitmap &= ~feature_bitmap; } return 0; } /** Set the mac age for the bridge domain. */ void bd_set_mac_age (vlib_main_t * vm, u32 bd_index, u8 age) { l2_bridge_domain_t *bd_config; int enable = 0; vec_validate (l2input_main.bd_configs, bd_index); bd_config = vec_elt_at_index (l2input_main.bd_configs, bd_index); bd_config->mac_age = age; /* check if there is at least one bd with mac aging enabled */ vec_foreach (bd_config, l2input_main.bd_configs) if (bd_config->bd_id != ~0 && bd_config->mac_age != 0) enable = 1; vlib_process_signal_event (vm, l2fib_mac_age_scanner_process_node.index, enable ? L2_MAC_AGE_PROCESS_EVENT_START : L2_MAC_AGE_PROCESS_EVENT_STOP, 0); } /** Set bridge-domain learn enable/disable. The CLI format is: set bridge-domain learn [disable] */ static clib_error_t * bd_learn (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd) { bd_main_t *bdm = &bd_main; clib_error_t *error = 0; u32 bd_index, bd_id; u32 enable; uword *p; if (!unformat (input, "%d", &bd_id)) { error = clib_error_return (0, "expecting bridge-domain id but got `%U'", format_unformat_error, input); goto done; } p = hash_get (bdm->bd_index_by_bd_id, bd_id); if (p == 0) return clib_error_return (0, "No such bridge domain %d", bd_id); bd_index = p[0]; enable = 1; if (unformat (input, "disable")) { enable = 0; } /* set the bridge domain flag */ if (bd_set_flags (vm, bd_index, L2_LEARN, enable)) { error = clib_error_return (0, "bridge-domain id %d out of range", bd_index); goto done; } done: return error; } /*? * Layer 2 learning can be enabled and disabled on each * interface and on each bridge-domain. Use this command to * manage bridge-domains. It is enabled by default. * * @cliexpar * Example of how to enable learning (where 200 is the bridge-domain-id): * @cliexcmd{set bridge-domain learn 200} * Example of how to disable learning (where 200 is the bridge-domain-id): * @cliexcmd{set bridge-domain learn 200 disable} ?*/ /* *INDENT-OFF* */ VLIB_CLI_COMMAND (bd_learn_cli, static) = { .path = "set bridge-domain learn", .short_help = "set bridge-domain learn [disable]", .function = bd_learn, }; /* *INDENT-ON* */ /** Set bridge-domain forward enable/disable. The CLI format is: set bridge-domain forward [disable] */ static clib_error_t * bd_fwd (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd) { bd_main_t *bdm = &bd_main; clib_error_t *error = 0; u32 bd_index, bd_id; u32 enable; uword *p; if (!unformat (input, "%d", &bd_id)) { error = clib_error_return (0, "expecting bridge-domain id but got `%U'", format_unformat_error, input); goto done; } p = hash_get (bdm->bd_index_by_bd_id, bd_id); if (p == 0) return clib_error_return (0, "No such bridge domain %d", bd_id); bd_index = p[0]; enable = 1; if (unformat (input, "disable")) { enable = 0; } /* set the bridge domain flag */ if (bd_set_flags (vm, bd_index, L2_FWD, enable)) { error = clib_error_return (0, "bridge-domain id %d out of range", bd_index); goto done; } done: return error; } /*? * Layer 2 unicast forwarding can be enabled and disabled on each * interface and on each bridge-domain. Use this command to * manage bridge-domains. It is enabled by default. * * @cliexpar * Example of how to enable forwarding (where 200 is the bridge-domain-id): * @cliexcmd{set bridge-domain forward 200} * Example of how to disable forwarding (where 200 is the bridge-domain-id): * @cliexcmd{set bridge-domain forward 200 disable} ?*/ /* *INDENT-OFF* */ VLIB_CLI_COMMAND (bd_fwd_cli, static) = { .path = "set bridge-domain forward", .short_help = "set bridge-domain forward [disable]", .function = bd_fwd, }; /* *INDENT-ON* */ /** Set bridge-domain flood enable/disable. The CLI format is: set bridge-domain flood [disable] */ static clib_error_t * bd_flood (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd) { bd_main_t *bdm = &bd_main; clib_error_t *error = 0; u32 bd_index, bd_id; u32 enable; uword *p; if (!unformat (input, "%d", &bd_id)) { error = clib_error_return (0, "expecting bridge-domain id but got `%U'", format_unformat_error, input); goto done; } p = hash_get (bdm->bd_index_by_bd_id, bd_id); if (p == 0) return clib_error_return (0, "No such bridge domain %d", bd_id); bd_index = p[0]; enable = 1; if (unformat (input, "disable")) { enable = 0; } /* set the bridge domain flag */ if (bd_set_flags (vm, bd_index, L2_FLOOD, enable)) { error = clib_error_return (0, "bridge-domain id %d out of range", bd_index); goto done; } done: return error; } /*? * Layer 2 flooding can be enabled and disabled on each * interface and on each bridge-domain. Use this command to * manage bridge-domains. It is enabled by default. * * @cliexpar * Example of how to enable flooding (where 200 is the bridge-domain-id): * @cliexcmd{set bridge-domain flood 200} * Example of how to disable flooding (where 200 is the bridge-domain-id): * @cliexcmd{set bridge-domain flood 200 disable} ?*/ /* *INDENT-OFF* */ VLIB_CLI_COMMAND (bd_flood_cli, static) = { .path = "set bridge-domain flood", .short_help = "set bridge-domain flood [disable]", .function = bd_flood, }; /* *INDENT-ON* */ /** Set bridge-domain unkown-unicast flood enable/disable. The CLI format is: set bridge-domain uu-flood [disable] */ static clib_error_t * bd_uu_flood (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd) { bd_main_t *bdm = &bd_main; clib_error_t *error = 0; u32 bd_index, bd_id; u32 enable; uword *p; if (!unformat (input, "%d", &bd_id)) { error = clib_error_return (0, "expecting bridge-domain id but got `%U'", format_unformat_error, input); goto done; } p = hash_get (bdm->bd_index_by_bd_id, bd_id); if (p == 0) return clib_error_return (0, "No such bridge domain %d", bd_id); bd_index = p[0]; enable = 1; if (unformat (input, "disable")) { enable = 0; } /* set the bridge domain flag */ if (bd_set_flags (vm, bd_index, L2_UU_FLOOD, enable)) { error = clib_error_return (0, "bridge-domain id %d out of range", bd_index); goto done; } done: return error; } /*? * Layer 2 unknown-unicast flooding can be enabled and disabled on each * bridge-domain. It is enabled by default. * * @cliexpar * Example of how to enable unknown-unicast flooding (where 200 is the * bridge-domain-id): * @cliexcmd{set bridge-domain uu-flood 200} * Example of how to disable unknown-unicast flooding (where 200 is the bridge-domain-id): * @cliexcmd{set bridge-domain uu-flood 200 disable} ?*/ /* *INDENT-OFF* */ VLIB_CLI_COMMAND (bd_uu_flood_cli, static) = { .path = "set bridge-domain uu-flood", .short_help = "set bridge-domain uu-flood [disable]", .function = bd_uu_flood, }; /* *INDENT-ON* */ /** Set bridge-domain arp term enable/disable. The CLI format is: set bridge-domain arp term [disable] */ static clib_error_t * bd_arp_term (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd) { bd_main_t *bdm = &bd_main; clib_error_t *error = 0; u32 bd_index, bd_id; u32 enable; uword *p; if (!unformat (input, "%d", &bd_id)) { error = clib_error_return (0, "expecting bridge-domain id but got `%U'", format_unformat_error, input); goto done; } p = hash_get (bdm->bd_index_by_bd_id, bd_id); if (p) bd_index = *p; else return clib_error_return (0, "No such bridge domain %d", bd_id); enable = 1; if (unformat (input, "disable")) enable = 0; /* set the bridge domain flag */ if (bd_set_flags (vm, bd_index, L2_ARP_TERM, enable)) { error = clib_error_return (0, "bridge-domain id %d out of range", bd_index); goto done; } done: return error; } static clib_error_t * bd_mac_age (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd) { bd_main_t *bdm = &bd_main; clib_error_t *error = 0; u32 bd_index, bd_id; u32 age; uword *p; if (!unformat (input, "%d", &bd_id)) { error = clib_error_return (0, "expecting bridge-domain id but got `%U'", format_unformat_error, input); goto done; } p = hash_get (bdm->bd_index_by_bd_id, bd_id); if (p == 0) return clib_error_return (0, "No such bridge domain %d", bd_id); bd_index = p[0]; if (!unformat (input, "%u", &age)) { error = clib_error_return (0, "expecting ageing time in minutes but got `%U'", format_unformat_error, input); goto done; } /* set the bridge domain flag */ if (age > 255) { error = clib_error_return (0, "mac aging time cannot be bigger than 255"); goto done; } bd_set_mac_age (vm, bd_index, (u8) age); done: return error; } /*? * Layer 2 mac aging can be enabled and disabled on each * bridge-domain. Use this command to set or disable mac aging * on specific bridge-domains. It is disabled by default. * * @cliexpar * Example of how to set mac aging (where 200 is the bridge-domain-id and * 5 is aging time in minutes): * @cliexcmd{set bridge-domain mac-age 200 5} * Example of how to disable mac aging (where 200 is the bridge-domain-id): * @cliexcmd{set bridge-domain flood 200 0} ?*/ /* *INDENT-OFF* */ VLIB_CLI_COMMAND (bd_mac_age_cli, static) = { .path = "set bridge-domain mac-age", .short_help = "set bridge-domain mac-age ", .function = bd_mac_age, }; /* *INDENT-ON* */ /*? * Modify whether or not an existing bridge-domain should terminate and respond * to ARP Requests. ARP Termination is disabled by default. * * @cliexpar * Example of how to enable ARP termination (where 200 is the bridge-domain-id): * @cliexcmd{set bridge-domain arp term 200} * Example of how to disable ARP termination (where 200 is the bridge-domain-id): * @cliexcmd{set bridge-domain arp term 200 disable} ?*/ /* *INDENT-OFF* */ VLIB_CLI_COMMAND (bd_arp_term_cli, static) = { .path = "set bridge-domain arp term", .short_help = "set bridge-domain arp term [disable]", .function = bd_arp_term, }; /* *INDENT-ON* */ /** * Add/delete IP address to MAC address mapping. * * The clib hash implementation stores uword entries in the hash table. * The hash table mac_by_ip4 is keyed via IP4 address and store the * 6-byte MAC address directly in the hash table entry uword. * * @warning This only works for 64-bit processor with 8-byte uword; * which means this code *WILL NOT WORK* for a 32-bit prcessor with * 4-byte uword. */ u32 bd_add_del_ip_mac (u32 bd_index, u8 * ip_addr, u8 * mac_addr, u8 is_ip6, u8 is_add) { l2input_main_t *l2im = &l2input_main; l2_bridge_domain_t *bd_cfg = l2input_bd_config_from_index (l2im, bd_index); u64 new_mac = *(u64 *) mac_addr; u64 *old_mac; u16 *mac16 = (u16 *) & new_mac; ASSERT (sizeof (uword) == sizeof (u64)); /* make sure uword is 8 bytes */ mac16[3] = 0; /* Clear last 2 unsed bytes of the 8-byte MAC address */ if (is_ip6) { ip6_address_t *ip6_addr_key; hash_pair_t *hp; old_mac = (u64 *) hash_get_mem (bd_cfg->mac_by_ip6, ip_addr); if (is_add) { if (old_mac == 0) { /* new entry - allocate and craete ip6 address key */ ip6_addr_key = clib_mem_alloc (sizeof (ip6_address_t)); clib_memcpy (ip6_addr_key, ip_addr, sizeof (ip6_address_t)); } else if (*old_mac == new_mac) { /* same mac entry already exist for ip6 address */ return 0; } else { /* updat mac for ip6 address */ hp = hash_get_pair (bd_cfg->mac_by_ip6, ip_addr); ip6_addr_key = (ip6_address_t *) hp->key; } hash_set_mem (bd_cfg->mac_by_ip6, ip6_addr_key, new_mac); } else { if (old_mac && (*old_mac == new_mac)) { hp = hash_get_pair (bd_cfg->mac_by_ip6, ip_addr); ip6_addr_key = (ip6_address_t *) hp->key; hash_unset_mem (bd_cfg->mac_by_ip6, ip_addr); clib_mem_free (ip6_addr_key); } else return 1; } } else { ip4_address_t ip4_addr = *(ip4_address_t *) ip_addr; old_mac = (u64 *) hash_get (bd_cfg->mac_by_ip4, ip4_addr.as_u32); if (is_add) { if (old_mac && (*old_mac == new_mac)) return 0; /* mac entry already exist */ hash_set (bd_cfg->mac_by_ip4, ip4_addr.as_u32, new_mac); } else { if (old_mac && (*old_mac == new_mac)) hash_unset (bd_cfg->mac_by_ip4, ip4_addr.as_u32); else return 1; } } return 0; } /** Set bridge-domain arp entry add/delete. The CLI format is: set bridge-domain arp entry [del] */ static clib_error_t * bd_arp_entry (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd) { bd_main_t *bdm = &bd_main; clib_error_t *error = 0; u32 bd_index, bd_id; u8 is_add = 1; u8 is_ip6 = 0; u8 ip_addr[16]; u8 mac_addr[6]; uword *p; if (!unformat (input, "%d", &bd_id)) { error = clib_error_return (0, "expecting bridge-domain id but got `%U'", format_unformat_error, input); goto done; } p = hash_get (bdm->bd_index_by_bd_id, bd_id); if (p) bd_index = *p; else return clib_error_return (0, "No such bridge domain %d", bd_id); if (unformat (input, "%U", unformat_ip4_address, ip_addr)) { is_ip6 = 0; } else if (unformat (input, "%U", unformat_ip6_address, ip_addr)) { is_ip6 = 1; } else { error = clib_error_return (0, "expecting IP address but got `%U'", format_unformat_error, input); goto done; } if (!unformat (input, "%U", unformat_ethernet_address, mac_addr)) { error = clib_error_return (0, "expecting MAC address but got `%U'", format_unformat_error, input); goto done; } if (unformat (input, "del")) { is_add = 0; } /* set the bridge domain flagAdd IP-MAC entry into bridge domain */ if (bd_add_del_ip_mac (bd_index, ip_addr, mac_addr, is_ip6, is_add)) { error = clib_error_return (0, "MAC %s for IP %U and MAC %U failed", is_add ? "add" : "del", is_ip6 ? format_ip4_address : format_ip6_address, ip_addr, format_ethernet_address, mac_addr); } done: return error; } /*? * Add an ARP entry to an existing bridge-domain. * * @cliexpar * Example of how to add an ARP entry (where 200 is the bridge-domain-id): * @cliexcmd{set bridge-domain arp entry 200 192.168.72.45 52:54:00:3b:83:1a} * Example of how to delete an ARP entry (where 200 is the bridge-domain-id): * @cliexcmd{set bridge-domain arp entry 200 192.168.72.45 52:54:00:3b:83:1a del} ?*/ /* *INDENT-OFF* */ VLIB_CLI_COMMAND (bd_arp_entry_cli, static) = { .path = "set bridge-domain arp entry", .short_help = "set bridge-domain arp entry [del]", .function = bd_arp_entry, }; /* *INDENT-ON* */ u8 * format_vtr (u8 * s, va_list * args) { u32 vtr_op = va_arg (*args, u32); u32 dot1q = va_arg (*args, u32); u32 tag1 = va_arg (*args, u32); u32 tag2 = va_arg (*args, u32); switch (vtr_op) { case L2_VTR_DISABLED: return format (s, "none"); case L2_VTR_PUSH_1: return format (s, "push-1 %s %d", dot1q ? "dot1q" : "dot1ad", tag1); case L2_VTR_PUSH_2: return format (s, "push-2 %s %d %d", dot1q ? "dot1q" : "dot1ad", tag1, tag2); case L2_VTR_POP_1: return format (s, "pop-1"); case L2_VTR_POP_2: return format (s, "pop-2"); case L2_VTR_TRANSLATE_1_1: return format (s, "trans-1-1 %s %d", dot1q ? "dot1q" : "dot1ad", tag1); case L2_VTR_TRANSLATE_1_2: return format (s, "trans-1-2 %s %d %d", dot1q ? "dot1q" : "dot1ad", tag1, tag2); case L2_VTR_TRANSLATE_2_1: return format (s, "trans-2-1 %s %d", dot1q ? "dot1q" : "dot1ad", tag1); case L2_VTR_TRANSLATE_2_2: return format (s, "trans-2-2 %s %d %d", dot1q ? "dot1q" : "dot1ad", tag1, tag2); default: return format (s, "none"); } } /** Show bridge-domain state. The CLI format is: show bridge-domain [] */ static clib_error_t * bd_show (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd) { vnet_main_t *vnm = vnet_get_main (); bd_main_t *bdm = &bd_main; clib_error_t *error = 0; u32 bd_index = ~0; l2_bridge_domain_t *bd_config; u32 start, end; u32 detail = 0; u32 intf = 0; u32 arp = 0; u32 bd_id = ~0; uword *p; start = 0; end = vec_len (l2input_main.bd_configs); if (unformat (input, "%d", &bd_id)) { if (unformat (input, "detail")) detail = 1; else if (unformat (input, "det")) detail = 1; if (unformat (input, "int")) intf = 1; if (unformat (input, "arp")) arp = 1; p = hash_get (bdm->bd_index_by_bd_id, bd_id); if (p) bd_index = *p; else return clib_error_return (0, "No such bridge domain %d", bd_id); vec_validate (l2input_main.bd_configs, bd_index); bd_config = vec_elt_at_index (l2input_main.bd_configs, bd_index); if (bd_is_valid (bd_config)) { start = bd_index; end = start + 1; } else { vlib_cli_output (vm, "bridge-domain %d not in use", bd_id); goto done; } } /* Show all bridge-domains that have been initialized */ u32 printed = 0; u8 *as = 0; for (bd_index = start; bd_index < end; bd_index++) { bd_config = vec_elt_at_index (l2input_main.bd_configs, bd_index); if (bd_is_valid (bd_config)) { if (!printed) { printed = 1; vlib_cli_output (vm, "%=5s %=7s %=4s %=9s %=9s %=9s %=9s %=9s %=9s %=9s", "ID", "Index", "BSN", "Age(min)", "Learning", "U-Forwrd", "UU-Flood", "Flooding", "ARP-Term", "BVI-Intf"); } if (bd_config->mac_age) as = format (as, "%d", bd_config->mac_age); else as = format (as, "off"); vlib_cli_output (vm, "%=5d %=7d %=4d %=9v %=9s %=9s %=9s %=9s %=9s %=9U", bd_config->bd_id, bd_index, bd_config->seq_num, as, bd_config->feature_bitmap & L2INPUT_FEAT_LEARN ? "on" : "off", bd_config->feature_bitmap & L2INPUT_FEAT_FWD ? "on" : "off", bd_config->feature_bitmap & L2INPUT_FEAT_UU_FLOOD ? "on" : "off", bd_config->feature_bitmap & L2INPUT_FEAT_FLOOD ? "on" : "off", bd_config->feature_bitmap & L2INPUT_FEAT_ARP_TERM ? "on" : "off", format_vnet_sw_if_index_name_with_NA, vnm, bd_config->bvi_sw_if_index); vec_reset_length (as); if (detail || intf) { /* Show all member interfaces */ int i; vec_foreach_index (i, bd_config->members) { l2_flood_member_t *member = vec_elt_at_index (bd_config->members, i); l2_input_config_t *int_config = l2input_intf_config (member->sw_if_index); u32 vtr_opr, dot1q, tag1, tag2; if (i == 0) { vlib_cli_output (vm, "\n%=30s%=7s%=5s%=5s%=5s%=9s%=30s", "Interface", "If-idx", "ISN", "SHG", "BVI", "TxFlood", "VLAN-Tag-Rewrite"); } l2vtr_get (vm, vnm, member->sw_if_index, &vtr_opr, &dot1q, &tag1, &tag2); vlib_cli_output (vm, "%=30U%=7d%=5d%=5d%=5s%=9s%=30U", format_vnet_sw_if_index_name, vnm, member->sw_if_index, member->sw_if_index, int_config->seq_num, member->shg, member->flags & L2_FLOOD_MEMBER_BVI ? "*" : "-", i < bd_config->flood_count ? "*" : "-", format_vtr, vtr_opr, dot1q, tag1, tag2); } } if ((detail || arp) && (bd_config->feature_bitmap & L2INPUT_FEAT_ARP_TERM)) { u32 ip4_addr; ip6_address_t *ip6_addr; u64 mac_addr; vlib_cli_output (vm, "\n IP4/IP6 to MAC table for ARP Termination"); /* *INDENT-OFF* */ hash_foreach (ip4_addr, mac_addr, bd_config->mac_by_ip4, ({ vlib_cli_output (vm, "%=40U => %=20U", format_ip4_address, &ip4_addr, format_ethernet_address, &mac_addr); })); hash_foreach_mem (ip6_addr, mac_addr, bd_config->mac_by_ip6, ({ vlib_cli_output (vm, "%=40U => %=20U", format_ip6_address, ip6_addr, format_ethernet_address, &mac_addr); })); /* *INDENT-ON* */ } } } vec_free (as); if (!printed) { vlib_cli_output (vm, "no bridge-domains in use"); } done: return error; } /*? * Show a summary of all the bridge-domain instances or detailed view of a * single bridge-domain. Bridge-domains are created by adding an interface * to a bridge using the 'set interface l2 bridge' command. * * @cliexpar * @parblock * Example of displaying all bridge-domains: * @cliexstart{show bridge-domain} * ID Index Learning U-Forwrd UU-Flood Flooding ARP-Term BVI-Intf * 0 0 off off off off off local0 * 200 1 on on on on off N/A * @cliexend * * Example of displaying details of a single bridge-domains: * @cliexstart{show bridge-domain 200 detail} * ID Index Learning U-Forwrd UU-Flood Flooding ARP-Term BVI-Intf * 200 1 on on on on off N/A * * Interface Index SHG BVI VLAN-Tag-Rewrite * GigabitEthernet0/8/0.200 3 0 - none * GigabitEthernet0/9/0.200 4 0 - none * @cliexend * @endparblock ?*/ /* *INDENT-OFF* */ VLIB_CLI_COMMAND (bd_show_cli, static) = { .path = "show bridge-domain", .short_help = "show bridge-domain [bridge-domain-id [detail|int|arp]]", .function = bd_show, }; /* *INDENT-ON* */ /* * fd.io coding-style-patch-verification: ON * * Local Variables: * eval: (c-set-style "gnu") * End: */