used to control the ACL plugin
*/
+option version = "1.0.1";
+
+import "plugins/acl/acl_types.api";
/** \brief Get the plugin version
@param client_index - opaque cookie to identify the sender
u32 vpe_pid;
};
-/** \brief Access List Rule entry
- @param is_permit - deny (0), permit (1), or permit+reflect(2) action on this rule.
- @param is_ipv6 - IP addresses in this rule are IPv6 (1) or IPv4 (0)
- @param src_ip_addr - Source prefix value
- @param src_ip_prefix_len - Source prefix length
- @param dst_ip_addr - Destination prefix value
- @param dst_ip_prefix_len - Destination prefix length
- @param proto - L4 protocol (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml)
- @param srcport_or_icmptype_first - beginning of source port or ICMP4/6 type range
- @param srcport_or_icmptype_last - end of source port or ICMP4/6 type range
- @param dstport_or_icmpcode_first - beginning of destination port or ICMP4/6 code range
- @param dstport_or_icmpcode_last - end of destination port or ICMP4/6 code range
- @param tcp_flags_mask - if proto==6, match masked TCP flags with this value
- @param tcp_flags_value - if proto==6, mask to AND the TCP flags in the packet with
-*/
-
-typeonly manual_print define acl_rule
+/** \brief Get Connection table max entries
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+
+define acl_plugin_get_conn_table_max_entries
{
- u8 is_permit;
- u8 is_ipv6;
- u8 src_ip_addr[16];
- u8 src_ip_prefix_len;
- u8 dst_ip_addr[16];
- u8 dst_ip_prefix_len;
-/*
- * L4 protocol. IANA number. 1 = ICMP, 58 = ICMPv6, 6 = TCP, 17 = UDP.
- * 0 => ignore L4 and ignore the ports/tcpflags when matching.
- */
- u8 proto;
-/*
- * If the L4 protocol is TCP or UDP, the below
- * hold ranges of ports, else if the L4 is ICMP/ICMPv6
- * they hold ranges of ICMP(v6) types/codes.
- *
- * Ranges are inclusive, i.e. to match "any" TCP/UDP port,
- * use first=0,last=65535. For ICMP(v6),
- * use first=0,last=255.
- */
- u16 srcport_or_icmptype_first;
- u16 srcport_or_icmptype_last;
- u16 dstport_or_icmpcode_first;
- u16 dstport_or_icmpcode_last;
-/*
- * for proto = 6, this matches if the
- * TCP flags in the packet, ANDed with tcp_flags_mask,
- * is equal to tcp_flags_value.
- */
- u8 tcp_flags_mask;
- u8 tcp_flags_value;
+ u32 client_index;
+ u32 context;
};
-/** \brief MACIP Access List Rule entry
- @param is_permit - deny (0), permit (1) action on this rule.
- @param is_ipv6 - IP addresses in this rule are IPv6 (1) or IPv4 (0)
- @param src_mac - match masked source MAC address against this value
- @param src_mac_mask - AND source MAC address with this value before matching
- @param src_ip_addr - Source prefix value
- @param src_ip_prefix_len - Source prefix length
+/** \brief Reply to get connection table max entries
+ @param context - sender context, to match reply w/ request
+ @param conn_table_max_entries - the value of maximum entries of connection table
*/
-
-typeonly manual_print define macip_acl_rule
+define acl_plugin_get_conn_table_max_entries_reply
{
- u8 is_permit;
- u8 is_ipv6;
-/*
- * The source mac of the packet ANDed with src_mac_mask.
- * The source ip[46] address in the packet is matched
- * against src_ip_addr, with src_ip_prefix_len set to 0.
- *
- * For better performance, minimize the number of
- * (src_mac_mask, src_ip_prefix_len) combinations
- * in a MACIP ACL.
- */
- u8 src_mac[6];
- u8 src_mac_mask[6];
- u8 src_ip_addr[16];
- u8 src_ip_prefix_len;
+ u32 context;
+ u64 conn_table_max_entries;
};
/** \brief Replace an existing ACL in-place or create a new ACL
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param tag - descriptive value for this MACIP ACL
- @param count - number of rules in this ACL
+ @param count - number of rules in this MACIP ACL
@param r - vector of MACIP ACL rules
*/
/** \brief Reply to add MACIP ACL
@param context - returned sender context, to match reply w/ request
- @param acl_index - index of the newly created ACL
+ @param acl_index - index of the newly created MACIP ACL
@param retval 0 - no error
*/
i32 retval;
};
+/** \brief Add/Replace a MACIP ACL
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param acl_index - an existing MACIP ACL entry (0..0xfffffffe) to replace, or 0xffffffff to make new MACIP ACL
+ @param tag - descriptive value for this MACIP ACL
+ @param count - number of rules in this MACIP ACL
+ @param r - vector of MACIP ACL rules
+*/
+
+manual_endian manual_print define macip_acl_add_replace
+{
+ u32 client_index;
+ u32 context;
+ u32 acl_index; /* ~0 to add, existing MACIP ACL# to replace */
+ u8 tag[64];
+ u32 count;
+ vl_api_macip_acl_rule_t r[count];
+};
+
+/** \brief Reply to add/replace MACIP ACL
+ @param context - returned sender context, to match reply w/ request
+ @param acl_index - index of the newly created MACIP ACL
+ @param retval 0 - no error
+*/
+
+define macip_acl_add_replace_reply
+{
+ u32 context;
+ u32 acl_index;
+ i32 retval;
+};
+
/** \brief Delete a MACIP ACL
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
/** \brief Add or delete a MACIP ACL to/from interface
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param is_add - add (1) or delete (0) ACL from being used on an interface
+ @param is_add - add (1) or delete (0) MACIP ACL from being used on an interface
@param sw_if_index - interface to apply the action to
@param acl_index - MACIP ACL index
*/
u32 client_index;
u32 context;
u8 is_add;
- /* macip ACLs are always input */
+ /* MACIP ACLs are always input */
u32 sw_if_index;
u32 acl_index;
};
/** \brief Dump one or all defined MACIP ACLs
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param acl_index - MACIP ACL index or ~0 to dump all ACLs
+ @param acl_index - MACIP ACL index or ~0 to dump all MACIP ACLs
*/
define macip_acl_dump
@param acl_index - index of this MACIP ACL
@param tag - descriptive tag which was supplied during the creation
@param count - length of the vector of MACIP ACL rules
- @param r - rules comprising this ACL
+ @param r - rules comprising this MACIP ACL
*/
manual_endian manual_print define macip_acl_details
/** \brief Reply with the vector of MACIP ACLs by sw_if_index
@param context - returned sender context, to match reply w/ request
@param count - total number of elements in the vector
- @param acls - the vector of active MACACL indices per sw_if_index
+ @param acls - the vector of active MACIP ACL indices per sw_if_index
*/
define macip_acl_interface_get_reply
/** \brief Dump the list(s) of MACIP ACLs applied to specific or all interfaces
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param sw_if_index - interface to dump the ACL list for
+ @param sw_if_index - interface to dump the MACIP ACL list for
*/
define macip_acl_interface_list_dump
/** \brief Details about a single MACIP ACL contents
@param context - returned sender context, to match reply w/ request
- @param sw_if_index - interface for which the list of ACLs is applied
+ @param sw_if_index - interface for which the list of MACIP ACLs is applied
@param count - total length of acl indices vector
- @param acls - the vector of ACL indices
+ @param acls - the vector of MACIP ACL indices
*/
define macip_acl_interface_list_details
u8 count;
u32 acls[count];
};
+
+/** \brief Set the ethertype whitelists on an interface. Takes effect when applying ACLs on the interface, so must be given prior.
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - the interface to alter the list of ACLs on
+ @param count - total number of whitelisted ethertypes in the vector
+ @param n_input - this many first elements correspond to input whitelisted ethertypes, the rest - output
+ @param whitelist - vector of whitelisted ethertypes
+*/
+
+autoreply manual_print define acl_interface_set_etype_whitelist
+{
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u8 count; /* Total number of ethertypes in the whitelist */
+ u8 n_input; /* first n_input ethertypes are input, the rest - output */
+ u16 whitelist[count];
+};
+
+/** \brief Dump the list(s) of Ethertype whitelists applied to specific or all interfaces
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - interface to dump the ethertype whitelist for
+*/
+
+define acl_interface_etype_whitelist_dump
+{
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index; /* ~0 for all interfaces */
+};
+
+/** \brief Details about ethertype whitelist on a single interface
+ @param context - returned sender context, to match reply w/ request
+ @param sw_if_index - interface for which the list of MACIP ACLs is applied
+ @param count - total number of whitelisted ethertypes in the vector
+ @param n_input - this many first elements correspond to input whitelisted ethertypes, the rest - output
+ @param whitelist - vector of whitelisted ethertypes
+*/
+
+define acl_interface_etype_whitelist_details
+{
+ u32 context;
+ u32 sw_if_index;
+ u8 count;
+ u8 n_input; /* first n_input ethertypes are input, the rest - output */
+ u16 whitelist[count];
+};
+
+/** \brief Enable or disable incrementing ACL counters in stats segment by interface processing
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param enable - whether to enable or disable incrementing the counters
+*/
+
+autoreply define acl_stats_intf_counters_enable
+{
+ u32 client_index;
+ u32 context;
+ bool enable;
+};
Code Review / vpp.git / blobdiff