#include <stdarg.h>
#include <vppinfra/types.h>
#include <vppinfra/format.h>
+#include <vnet/error.h>
-#define foreach_vnet_api_error \
-_(UNSPECIFIED, -1, "Unspecified Error") \
-_(INVALID_SW_IF_INDEX, -2, "Invalid sw_if_index") \
-_(NO_SUCH_FIB, -3, "No such FIB / VRF") \
-_(NO_SUCH_INNER_FIB, -4, "No such inner FIB / VRF") \
-_(NO_SUCH_LABEL, -5, "No such label") \
-_(NO_SUCH_ENTRY, -6, "No such entry") \
-_(INVALID_VALUE, -7, "Invalid value") \
-_(INVALID_VALUE_2, -8, "Invalid value #2") \
-_(UNIMPLEMENTED, -9, "Unimplemented") \
-_(INVALID_SW_IF_INDEX_2, -10, "Invalid sw_if_index #2") \
-_(SYSCALL_ERROR_1, -11, "System call error #1") \
-_(SYSCALL_ERROR_2, -12, "System call error #2") \
-_(SYSCALL_ERROR_3, -13, "System call error #3") \
-_(SYSCALL_ERROR_4, -14, "System call error #4") \
-_(SYSCALL_ERROR_5, -15, "System call error #5") \
-_(SYSCALL_ERROR_6, -16, "System call error #6") \
-_(SYSCALL_ERROR_7, -17, "System call error #7") \
-_(SYSCALL_ERROR_8, -18, "System call error #8") \
-_(SYSCALL_ERROR_9, -19, "System call error #9") \
-_(SYSCALL_ERROR_10, -20, "System call error #10") \
-_(FEATURE_DISABLED, -30, "Feature disabled by configuration") \
-_(INVALID_REGISTRATION, -31, "Invalid registration") \
-_(NEXT_HOP_NOT_IN_FIB, -50, "Next hop not in FIB") \
-_(UNKNOWN_DESTINATION, -51, "Unknown destination") \
-_(NO_PATHS_IN_ROUTE, -52, "No paths specified in route") \
-_(NEXT_HOP_NOT_FOUND_MP, -53, "Next hop not found (multipath)") \
-_(NO_MATCHING_INTERFACE, -54, "No matching interface for probe") \
-_(INVALID_VLAN, -55, "Invalid VLAN") \
-_(VLAN_ALREADY_EXISTS, -56, "VLAN subif already exists") \
-_(INVALID_SRC_ADDRESS, -57, "Invalid src address") \
-_(INVALID_DST_ADDRESS, -58, "Invalid dst address") \
-_(ADDRESS_LENGTH_MISMATCH, -59, "Address length mismatch") \
-_(ADDRESS_NOT_FOUND_FOR_INTERFACE, -60, "Address not found for interface") \
-_(ADDRESS_NOT_DELETABLE, -61, "Address not deletable") \
-_(IP6_NOT_ENABLED, -62, "ip6 not enabled") \
-_(NO_SUCH_NODE, -63, "No such graph node") \
-_(NO_SUCH_NODE2, -64, "No such graph node #2") \
-_(NO_SUCH_TABLE, -65, "No such table") \
-_(NO_SUCH_TABLE2, -66, "No such table #2") \
-_(NO_SUCH_TABLE3, -67, "No such table #3") \
-_(SUBIF_ALREADY_EXISTS, -68, "Subinterface already exists") \
-_(SUBIF_CREATE_FAILED, -69, "Subinterface creation failed") \
-_(INVALID_MEMORY_SIZE, -70, "Invalid memory size requested") \
-_(INVALID_INTERFACE, -71, "Invalid interface") \
-_(INVALID_VLAN_TAG_COUNT, -72, "Invalid number of tags for requested operation") \
-_(INVALID_ARGUMENT, -73, "Invalid argument") \
-_(UNEXPECTED_INTF_STATE, -74, "Unexpected interface state") \
-_(TUNNEL_EXIST, -75, "Tunnel already exists") \
-_(INVALID_DECAP_NEXT, -76, "Invalid decap-next") \
-_(RESPONSE_NOT_READY, -77, "Response not ready") \
-_(NOT_CONNECTED, -78, "Not connected to the data plane") \
-_(IF_ALREADY_EXISTS, -79, "Interface already exists") \
-_(BOND_SLAVE_NOT_ALLOWED, -80, "Operation not allowed on slave of BondEthernet") \
-_(VALUE_EXIST, -81, "Value already exists") \
-_(SAME_SRC_DST, -82, "Source and destination are the same") \
-_(IP6_MULTICAST_ADDRESS_NOT_PRESENT, -83, "IP6 multicast address required") \
-_(SR_POLICY_NAME_NOT_PRESENT, -84, "Segment routing policy name required") \
-_(NOT_RUNNING_AS_ROOT, -85, "Not running as root") \
-_(ALREADY_CONNECTED, -86, "Connection to the data plane already exists") \
-_(UNSUPPORTED_JNI_VERSION, -87, "Unsupported JNI version") \
-_(IP_PREFIX_INVALID, -88, "IP prefix invalid (masked bits set in address") \
-_(INVALID_WORKER, -89, "Invalid worker thread") \
-_(LISP_DISABLED, -90, "LISP is disabled") \
-_(CLASSIFY_TABLE_NOT_FOUND, -91, "Classify table not found") \
-_(INVALID_EID_TYPE, -92, "Unsupported LISP EID type") \
-_(CANNOT_CREATE_PCAP_FILE, -93, "Cannot create pcap file") \
-_(INCORRECT_ADJACENCY_TYPE, -94, "Invalid adjacency type for this operation") \
-_(EXCEEDED_NUMBER_OF_RANGES_CAPACITY, -95, "Operation would exceed configured capacity of ranges") \
-_(EXCEEDED_NUMBER_OF_PORTS_CAPACITY, -96, "Operation would exceed capacity of number of ports") \
-_(INVALID_ADDRESS_FAMILY, -97, "Invalid address family") \
-_(INVALID_SUB_SW_IF_INDEX, -98, "Invalid sub-interface sw_if_index") \
-_(TABLE_TOO_BIG, -99, "Table too big") \
-_(CANNOT_ENABLE_DISABLE_FEATURE, -100, "Cannot enable/disable feature") \
-_(BFD_EEXIST, -101, "Duplicate BFD object") \
-_(BFD_ENOENT, -102, "No such BFD object") \
-_(BFD_EINUSE, -103, "BFD object in use") \
-_(BFD_NOTSUPP, -104, "BFD feature not supported") \
-_(ADDRESS_IN_USE, -105, "Address in use") \
-_(ADDRESS_NOT_IN_USE, -106, "Address not in use") \
-_(QUEUE_FULL, -107, "Queue full") \
-_(APP_UNSUPPORTED_CFG, -108, "Unsupported application config") \
-_(URI_FIFO_CREATE_FAILED, -109, "URI FIFO segment create failed") \
-_(LISP_RLOC_LOCAL, -110, "RLOC address is local") \
-_(BFD_EAGAIN, -111, "BFD object cannot be manipulated at this time") \
-_(INVALID_GPE_MODE, -112, "Invalid GPE mode") \
-_(LISP_GPE_ENTRIES_PRESENT, -113, "LISP GPE entries are present") \
-_(ADDRESS_FOUND_FOR_INTERFACE, -114, "Address found for interface") \
-_(SESSION_CONNECT, -115, "Session failed to connect") \
-_(ENTRY_ALREADY_EXISTS, -116, "Entry already exists") \
-_(SVM_SEGMENT_CREATE_FAIL, -117, "Svm segment create fail") \
-_(APPLICATION_NOT_ATTACHED, -118, "Application not attached") \
-_(BD_ALREADY_EXISTS, -119, "Bridge domain already exists") \
-_(BD_IN_USE, -120, "Bridge domain has member interfaces") \
-_(BD_NOT_MODIFIABLE, -121, "Bridge domain 0 can't be deleted/modified") \
-_(BD_ID_EXCEED_MAX, -122, "Bridge domain ID exceeds 16M limit") \
-_(SUBIF_DOESNT_EXIST, -123, "Subinterface doesn't exist") \
-_(L2_MACS_EVENT_CLINET_PRESENT, -124, "Client already exist for L2 MACs events") \
-_(INVALID_QUEUE, -125, "Invalid queue") \
-_(UNSUPPORTED, -126, "Unsupported") \
-_(DUPLICATE_IF_ADDRESS, -127, "Address already present on another interface") \
-_(APP_INVALID_NS, -128, "Invalid application namespace") \
-_(APP_WRONG_NS_SECRET, -129, "Wrong app namespace secret") \
-_(APP_CONNECT_SCOPE, -130, "Connect scope") \
-_(APP_ALREADY_ATTACHED, -131, "App already attached") \
-_(SESSION_REDIRECT, -132, "Redirect failed") \
-_(ILLEGAL_NAME, -133, "Illegal name") \
-_(NO_NAME_SERVERS, -134, "No name servers configured") \
-_(NAME_SERVER_NOT_FOUND, -135, "Name server not found") \
-_(NAME_RESOLUTION_NOT_ENABLED, -136, "Name resolution not enabled") \
-_(NAME_SERVER_FORMAT_ERROR, -137, "Server format error (bug!)") \
-_(NAME_SERVER_NO_SUCH_NAME, -138, "No such name") \
-_(NAME_SERVER_NO_ADDRESSES, -139, "No addresses available") \
-_(NAME_SERVER_NEXT_SERVER, -140, "Retry with new server") \
-_(APP_CONNECT_FILTERED, -141, "Connect was filtered") \
-_(ACL_IN_USE_INBOUND, -142, "Inbound ACL in use") \
-_(ACL_IN_USE_OUTBOUND, -143, "Outbound ACL in use") \
-_(INIT_FAILED, -144, "Initialization Failed") \
-_(NETLINK_ERROR, -145, "Netlink error") \
-_(BIER_BSL_UNSUP, -146, "BIER bit-string-length unsupported") \
-_(INSTANCE_IN_USE, -147, "Instance in use") \
-_(INVALID_SESSION_ID, -148, "Session ID out of range") \
-_(ACL_IN_USE_BY_LOOKUP_CONTEXT, -149, "ACL in use by a lookup context") \
-_(INVALID_VALUE_3, -150, "Invalid value #3") \
-_(NON_ETHERNET, -151, "Interface is not an Ethernet interface") \
-_(BD_ALREADY_HAS_BVI, -152, "Bridge domain already has a BVI interface") \
-_(INVALID_PROTOCOL, -153, "Invalid Protocol") \
-_(INVALID_ALGORITHM, -154, "Invalid Algorithm") \
-_(RSRC_IN_USE, -155, "Resource In Use") \
-_(KEY_LENGTH, -156, "invalid Key Length") \
-_(FIB_PATH_UNSUPPORTED_NH_PROTO, -157, "Unsupported FIB Path protocol") \
-_(API_ENDIAN_FAILED, -159, "Endian mismatch detected") \
-_(NO_CHANGE, -160, "No change in table") \
-_(MISSING_CERT_KEY, -161, "Missing certifcate or key") \
-_(LIMIT_EXCEEDED, -162, "limit exceeded") \
-_(IKE_NO_PORT, -163, "port not managed by IKE") \
-_(UDP_PORT_TAKEN, -164, "UDP port already taken") \
-_(EAGAIN, -165, "Retry stream call with cursor") \
-_(INVALID_VALUE_4, -166, "Invalid value #4") \
+#define foreach_vnet_api_error foreach_vnet_error
typedef enum
{
VNET_API_N_ERROR,
} vnet_api_error_t;
-/* *INDENT-OFF* */
-static inline u8 *
-format_vnet_api_errno (u8 * s, va_list * args)
+format_function_t format_vnet_api_errno;
+
+static_always_inline vnet_api_error_t
+vnet_api_error (clib_error_t *err)
{
- vnet_api_error_t api_error = va_arg (*args, vnet_api_error_t);
-#ifdef _
-#undef _
-#endif
-#define _(a, b, c) \
- case b: \
- s = format (s, "%s", c); \
- break;
- switch (api_error)
- {
- foreach_vnet_api_error
- default:
- s = format (s, "UNKNOWN");
- break;
- }
- return s;
-#undef _
+ if (err->code >= 0)
+ return VNET_API_ERROR_BUG;
+ return err->code;
}
-/* *INDENT-ON* */
#endif /* included_vnet_api_errno_h */
Code Review / vpp.git / blobdiff