/**
* Flags that are set in the high order bits of ((vlib_buffer*)b)->flags
+ *
+ */
+#define foreach_vnet_buffer_flag \
+ _( 1, L4_CHECKSUM_COMPUTED, "l4-cksum-computed", 1) \
+ _( 2, L4_CHECKSUM_CORRECT, "l4-cksum-correct", 1) \
+ _( 3, VLAN_2_DEEP, "vlan-2-deep", 1) \
+ _( 4, VLAN_1_DEEP, "vlan-1-deep", 1) \
+ _( 5, SPAN_CLONE, "span-clone", 1) \
+ _( 6, LOOP_COUNTER_VALID, "loop-counter-valid", 0) \
+ _( 7, LOCALLY_ORIGINATED, "local", 1) \
+ _( 8, IS_IP4, "ip4", 1) \
+ _( 9, IS_IP6, "ip6", 1) \
+ _(10, OFFLOAD_IP_CKSUM, "offload-ip-cksum", 1) \
+ _(11, OFFLOAD_TCP_CKSUM, "offload-tcp-cksum", 1) \
+ _(12, OFFLOAD_UDP_CKSUM, "offload-udp-cksum", 1) \
+ _(13, IS_NATED, "natted", 1) \
+ _(14, L2_HDR_OFFSET_VALID, "l2_hdr_offset_valid", 0) \
+ _(15, L3_HDR_OFFSET_VALID, "l3_hdr_offset_valid", 0) \
+ _(16, L4_HDR_OFFSET_VALID, "l4_hdr_offset_valid", 0) \
+ _(17, FLOW_REPORT, "flow-report", 1) \
+ _(18, IS_DVR, "dvr", 1) \
+ _(19, QOS_DATA_VALID, "qos-data-valid", 0) \
+ _(20, GSO, "gso", 0) \
+ _(21, AVAIL1, "avail1", 1) \
+ _(22, AVAIL2, "avail2", 1) \
+ _(23, AVAIL3, "avail3", 1) \
+ _(24, AVAIL4, "avail4", 1) \
+ _(25, AVAIL5, "avail5", 1) \
+ _(26, AVAIL6, "avail6", 1) \
+ _(27, AVAIL7, "avail7", 1)
+
+/*
+ * Please allocate the FIRST available bit, redefine
+ * AVAIL 1 ... AVAILn-1, and remove AVAILn. Please maintain the
+ * VNET_BUFFER_FLAGS_ALL_AVAIL definition.
*/
-#define foreach_vnet_buffer_flag \
- _( 1, L4_CHECKSUM_COMPUTED, "l4-cksum-computed") \
- _( 2, L4_CHECKSUM_CORRECT, "l4-cksum-correct") \
- _( 3, VLAN_2_DEEP, "vlan-2-deep") \
- _( 4, VLAN_1_DEEP, "vlan-1-deep") \
- _( 5, SPAN_CLONE, "span-clone") \
- _( 6, LOOP_COUNTER_VALID, 0) \
- _( 7, LOCALLY_ORIGINATED, "local") \
- _( 8, IS_IP4, "ip4") \
- _( 9, IS_IP6, "ip6") \
- _(10, OFFLOAD_IP_CKSUM, "offload-ip-cksum") \
- _(11, OFFLOAD_TCP_CKSUM, "offload-tcp-cksum") \
- _(12, OFFLOAD_UDP_CKSUM, "offload-udp-cksum") \
- _(13, IS_NATED, "nated") \
- _(14, L2_HDR_OFFSET_VALID, 0) \
- _(15, L3_HDR_OFFSET_VALID, 0) \
- _(16, L4_HDR_OFFSET_VALID, 0) \
- _(17, FLOW_REPORT, "flow-report") \
- _(18, IS_DVR, "dvr") \
- _(19, QOS_DATA_VALID, 0)
+
+#define VNET_BUFFER_FLAGS_ALL_AVAIL \
+ (VNET_BUFFER_F_AVAIL1 | VNET_BUFFER_F_AVAIL2 | VNET_BUFFER_F_AVAIL3 | \
+ VNET_BUFFER_F_AVAIL4 | VNET_BUFFER_F_AVAIL5 | VNET_BUFFER_F_AVAIL6 | \
+ VNET_BUFFER_F_AVAIL7)
#define VNET_BUFFER_FLAGS_VLAN_BITS \
(VNET_BUFFER_F_VLAN_1_DEEP | VNET_BUFFER_F_VLAN_2_DEEP)
enum
{
-#define _(bit, name, v) VNET_BUFFER_F_##name = (1 << LOG2_VLIB_BUFFER_FLAG_USER(bit)),
+#define _(bit, name, s, v) VNET_BUFFER_F_##name = (1 << LOG2_VLIB_BUFFER_FLAG_USER(bit)),
foreach_vnet_buffer_flag
#undef _
};
enum
{
-#define _(bit, name, v) VNET_BUFFER_F_LOG2_##name = LOG2_VLIB_BUFFER_FLAG_USER(bit),
+#define _(bit, name, s, v) VNET_BUFFER_F_LOG2_##name = LOG2_VLIB_BUFFER_FLAG_USER(bit),
foreach_vnet_buffer_flag
#undef _
};
+/* Make sure that the vnet and vlib bits are disjoint */
+STATIC_ASSERT (((VNET_BUFFER_FLAGS_ALL_AVAIL & VLIB_BUFFER_FLAGS_ALL) == 0),
+ "VLIB / VNET buffer flags overlap");
+
#define foreach_buffer_opaque_union_subtype \
_(ip) \
_(l2) \
/* in/out variables */
struct
{
- u32 next_index; /* index of next node - ignored if "feature" node */
+ u32 next_index; /* index of next node - used by custom apps */
+ u32 error_next_index; /* index of next node if error - used by custom apps */
u16 estimated_mtu; /* estimated MTU calculated during reassembly */
+ u16 owner_thread_index;
};
/* internal variables used during reassembly */
struct
u16 range_last;
u32 next_range_bi;
u16 ip6_frag_hdr_offset;
+ u16 owner_feature_thread_index;
};
} reass;
};
/* Rewrite length */
u32 save_rewrite_length;
/*
- * BIER - the nubmer of bytes in the header.
- * the len field inthe header is not authoritative. It's the
+ * BIER - the number of bytes in the header.
+ * the len field in the header is not authoritative. It's the
* value in the table that counts.
*/
struct
{
u32 feature_bitmap;
u16 bd_index; /* bridge-domain index */
+ u16 l2fib_sn; /* l2fib bd/int seq_num */
u8 l2_len; /* ethernet header length */
u8 shg; /* split-horizon group */
- u16 l2fib_sn; /* l2fib bd/int seq_num */
u8 bd_age; /* aging enabled */
} l2;
/* interface output features */
struct
{
- u32 flags;
u32 sad_index;
+ u32 protect_index;
} ipsec;
/* MAP */
struct
{
u32 pad[2]; /* do not overlay w/ ip.adj_index[0,1] */
- u16 header_offset;
u16 mtu;
u8 next_index;
u8 flags; //See ip_frag.h
struct
{
u32 connection_index;
- u32 seq_number;
+ union
+ {
+ u32 seq_number;
+ u32 next_node_opaque;
+ };
u32 seq_end;
u32 ack_number;
u16 hdr_offset; /**< offset relative to ip hdr */
u8 flags;
} tcp;
- /* SCTP */
- struct
- {
- u32 connection_index;
- u16 sid; /**< Stream ID */
- u16 ssn; /**< Stream Sequence Number */
- u32 tsn; /**< Transmission Sequence Number */
- u16 hdr_offset; /**< offset relative to ip hdr */
- u16 data_offset; /**< offset relative to ip hdr */
- u16 data_len; /**< data len */
- u8 subconn_idx; /**< index of the sub_connection being used */
- u8 flags;
- } sctp;
-
/* SNAT */
struct
{
} vnet_buffer_opaque_t;
/*
- * The opaque field of the vlib_buffer_t is intepreted as a
+ * The opaque field of the vlib_buffer_t is interpreted as a
* vnet_buffer_opaque_t. Hence it should be big enough to accommodate one.
*/
STATIC_ASSERT (sizeof (vnet_buffer_opaque_t) <=
{
u8 __unused;
u8 flags;
- u16 src_epg;
+ u16 sclass;
} gbp;
+ /**
+ * The L4 payload size set on input on GSO enabled interfaces
+ * when we receive a GSO packet (a chain of buffers with the first one
+ * having GSO bit set), and needs to persist all the way to the interface-output,
+ * in case the egress interface is not GSO-enabled - then we need to perform
+ * the segmentation, and use this value to cut the payload appropriately.
+ */
+ u16 gso_size;
+ /* size of L4 prototol header */
+ u16 gso_l4_hdr_sz;
+
+ /* The union below has a u64 alignment, so this space is unused */
+ u32 __unused2[1];
+
union
{
struct
u64 pad[1];
u64 pg_replay_timestamp;
};
- u32 unused[10];
+ u32 unused[8];
};
} vnet_buffer_opaque2_t;
#define vnet_buffer2(b) ((vnet_buffer_opaque2_t *) (b)->opaque2)
/*
- * The opaque2 field of the vlib_buffer_t is intepreted as a
+ * The opaque2 field of the vlib_buffer_t is interpreted as a
* vnet_buffer_opaque2_t. Hence it should be big enough to accommodate one.
*/
STATIC_ASSERT (sizeof (vnet_buffer_opaque2_t) <=
STRUCT_SIZE_OF (vlib_buffer_t, opaque2),
"VNET buffer opaque2 meta-data too large for vlib_buffer");
+#define gso_mtu_sz(b) (vnet_buffer2(b)->gso_size + vnet_buffer2(b)->gso_l4_hdr_sz + vnet_buffer(b)->l4_hdr_offset)
+
+
format_function_t format_vnet_buffer;
#endif /* included_vnet_buffer_h */
Code Review / vpp.git / blobdiff