};
/* *INDENT-ON* */
+static clib_error_t *
+show_interface_sec_mac_addr_fn (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ vnet_main_t *vnm = vnet_get_main ();
+ vnet_interface_main_t *im = &vnm->interface_main;
+ ethernet_main_t *em = ðernet_main;
+ u32 sw_if_index = ~0;
+ vnet_sw_interface_t *si, *sorted_sis = 0;
+
+ if (unformat (input, "%U", unformat_vnet_sw_interface, vnm, &sw_if_index))
+ {
+ si = pool_elt_at_index (im->sw_interfaces, sw_if_index);
+ vec_add1 (sorted_sis, si[0]);
+ }
+
+ /* if an interface name was not passed, get all interfaces */
+ if (vec_len (sorted_sis) == 0)
+ {
+ sorted_sis =
+ vec_new (vnet_sw_interface_t, pool_elts (im->sw_interfaces));
+ _vec_len (sorted_sis) = 0;
+ /* *INDENT-OFF* */
+ pool_foreach (si, im->sw_interfaces,
+ ({
+ int visible = vnet_swif_is_api_visible (si);
+ if (visible)
+ vec_add1 (sorted_sis, si[0]);}
+ ));
+ /* *INDENT-ON* */
+ /* Sort by name. */
+ vec_sort_with_function (sorted_sis, sw_interface_name_compare);
+ }
+
+ vec_foreach (si, sorted_sis)
+ {
+ vnet_sw_interface_t *sup_si;
+ ethernet_interface_t *ei;
+
+ sup_si = vnet_get_sup_sw_interface (vnm, si->sw_if_index);
+ ei = ethernet_get_interface (em, sup_si->hw_if_index);
+
+ vlib_cli_output (vm, "%U (%s):",
+ format_vnet_sw_if_index_name, vnm, si->sw_if_index,
+ (si->flags & VNET_SW_INTERFACE_FLAG_ADMIN_UP) ?
+ "up" : "dn");
+
+ if (ei && ei->secondary_addrs)
+ {
+ mac_address_t *sec_addr;
+
+ vec_foreach (sec_addr, ei->secondary_addrs)
+ {
+ vlib_cli_output (vm, " %U", format_mac_address_t, sec_addr);
+ }
+ }
+ }
+
+ vec_free (sorted_sis);
+ return 0;
+}
+
+/*?
+ * This command is used to display interface secondary mac addresses.
+ *
+ * @cliexpar
+ * Example of how to display interface secondary mac addresses:
+ * @cliexstart{show interface secondary-mac-address}
+ * @cliexend
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (show_interface_sec_mac_addr, static) = {
+ .path = "show interface secondary-mac-address",
+ .short_help = "show interface secondary-mac-address [<interface>]",
+ .function = show_interface_sec_mac_addr_fn,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+interface_add_del_mac_address (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ vnet_main_t *vnm = vnet_get_main ();
+ vnet_sw_interface_t *si = NULL;
+ clib_error_t *error = 0;
+ u32 sw_if_index = ~0;
+ u8 mac[6] = { 0 };
+ u8 is_add, is_del;
+
+ is_add = is_del = 0;
+
+ if (!unformat_user (input, unformat_vnet_sw_interface, vnm, &sw_if_index))
+ {
+ error = clib_error_return (0, "unknown interface `%U'",
+ format_unformat_error, input);
+ goto done;
+ }
+ if (!unformat_user (input, unformat_ethernet_address, mac))
+ {
+ error = clib_error_return (0, "expected mac address `%U'",
+ format_unformat_error, input);
+ goto done;
+ }
+
+ while (unformat_check_input (input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat (input, "add"))
+ is_add = 1;
+ else if (unformat (input, "del"))
+ is_del = 1;
+ else
+ break;
+ }
+
+ if (is_add == is_del)
+ {
+ error = clib_error_return (0, "must choose one of add or del");
+ goto done;
+ }
+
+ si = vnet_get_sw_interface (vnm, sw_if_index);
+ error =
+ vnet_hw_interface_add_del_mac_address (vnm, si->hw_if_index, mac, is_add);
+
+done:
+ return error;
+}
+
+/*?
+ * The '<em>set interface secondary-mac-address </em>' command allows adding
+ * or deleting extra MAC addresses on a given interface without changing the
+ * default MAC address. This could allow packets sent to these MAC addresses
+ * to be received without setting the interface to promiscuous mode.
+ * Not all interfaces support this operation. The ones that do are mostly
+ * hardware NICs, though virtio does also.
+ *
+ * @cliexpar
+ * @parblock
+ * Example of how to add a secondary MAC Address on an interface:
+ * @cliexcmd{set interface secondary-mac-address GigabitEthernet0/8/0 aa:bb:cc:dd:ee:01 add}
+ * Example of how to delete a secondary MAC address from an interface:
+ * @cliexcmd{set interface secondary-mac-address GigabitEthernet0/8/0 aa:bb:cc:dd:ee:01 del}
+ * @endparblock
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (interface_add_del_mac_address_cmd, static) = {
+ .path = "set interface secondary-mac-address",
+ .short_help = "set interface secondary-mac-address <interface> <mac-address> [(add|del)]",
+ .function = interface_add_del_mac_address,
+};
+/* *INDENT-ON* */
+
static clib_error_t *
set_interface_mac_address (vlib_main_t * vm, unformat_input_t * input,
vlib_cli_command_t * cmd)
};
/* *INDENT-ON* */
+static u8 *
+format_vnet_pcap (u8 * s, va_list * args)
+{
+ vnet_pcap_t *pp = va_arg (*args, vnet_pcap_t *);
+ int type = va_arg (*args, int);
+ int printed = 0;
+
+ if (type == 0)
+ {
+ if (pp->pcap_rx_enable)
+ {
+ s = format (s, "rx");
+ printed = 1;
+ }
+ if (pp->pcap_tx_enable)
+ {
+ if (printed)
+ s = format (s, " and ");
+ s = format (s, "tx");
+ printed = 1;
+ }
+ if (pp->pcap_drop_enable)
+ {
+ if (printed)
+ s = format (s, " and ");
+ s = format (s, "drop");
+ printed = 1;
+ }
+ return s;
+ }
+ s = format (s, "unknown type %d!", type);
+ return s;
+}
+
+
int
vnet_pcap_dispatch_trace_configure (vnet_pcap_dispatch_trace_args_t * a)
{
vlib_main_t *vm = vlib_get_main ();
- vlib_rx_or_tx_t rxtx = a->rxtx;
- vnet_pcap_t *pp = &vm->pcap[rxtx];
+ vnet_pcap_t *pp = &vm->pcap;
pcap_main_t *pm = &pp->pcap_main;
+ vnet_classify_main_t *cm = &vnet_classify_main;
+ vnet_classify_filter_set_t *set = 0;
if (a->status)
{
- if (pp->pcap_enable == 0)
+ if (pp->pcap_rx_enable || pp->pcap_tx_enable || pp->pcap_drop_enable)
{
vlib_cli_output
- (vm, "pcap %s dispatch capture enabled: %d of %d pkts...",
- (rxtx == VLIB_RX) ? "rx" : "tx",
+ (vm, "pcap %U dispatch capture enabled: %d of %d pkts...",
+ format_vnet_pcap, pp, 0 /* print type */ ,
pm->n_packets_captured, pm->n_packets_to_capture);
vlib_cli_output (vm, "capture to file %s", pm->file_name);
}
else
- vlib_cli_output (vm, "pcap %s dispatch capture disabled",
- (rxtx == VLIB_RX) ? "rx" : "tx");
+ vlib_cli_output (vm, "pcap dispatch capture disabled");
+
return 0;
}
/* Consistency checks */
/* Enable w/ capture already enabled not allowed */
- if (pp->pcap_enable && a->enable)
+ if ((pp->pcap_rx_enable + pp->pcap_tx_enable + pp->pcap_drop_enable)
+ && (a->rx_enable + a->tx_enable + a->drop_enable))
return VNET_API_ERROR_INVALID_VALUE;
/* Disable capture with capture already disabled, not interesting */
- if (pp->pcap_enable == 0 && a->enable == 0)
+ if (((pp->pcap_rx_enable + pp->pcap_tx_enable + pp->pcap_drop_enable) == 0)
+ && ((a->rx_enable + a->tx_enable + a->drop_enable == 0)))
return VNET_API_ERROR_VALUE_EXIST;
/* Change number of packets to capture while capturing */
- if (pp->pcap_enable && a->enable
+ if ((pp->pcap_rx_enable + pp->pcap_tx_enable + pp->pcap_drop_enable)
+ && (a->rx_enable + a->tx_enable + a->drop_enable)
&& (pm->n_packets_to_capture != a->packets_to_capture))
return VNET_API_ERROR_INVALID_VALUE_2;
- if (a->enable)
+ set = pool_elt_at_index (cm->filter_sets, cm->filter_set_by_sw_if_index[0]);
+
+ /* Classify filter specified, but no classify filter configured */
+ if ((a->rx_enable + a->tx_enable + a->drop_enable) && a->filter &&
+ (set->table_indices[0] == ~0))
+ return VNET_API_ERROR_NO_SUCH_LABEL;
+
+ if (a->rx_enable + a->tx_enable + a->drop_enable)
{
+ /* Sanity check max bytes per pkt */
+ if (a->max_bytes_per_pkt < 32 || a->max_bytes_per_pkt > 9000)
+ return VNET_API_ERROR_INVALID_MEMORY_SIZE;
+
/* Clean up from previous run, if any */
vec_free (pm->file_name);
vec_free (pm->pcap_data);
clib_spinlock_init (&(pm->lock));
if (a->filename == 0)
- a->filename = format (0, "/tmp/%s.pcap%c",
- (rxtx == VLIB_RX) ? "rx" : "tx", 0);
+ {
+ u8 *stem = 0;
+
+ if (a->rx_enable)
+ stem = format (stem, "rx");
+ if (a->tx_enable)
+ stem = format (stem, "tx");
+ if (a->drop_enable)
+ stem = format (stem, "drop");
+ a->filename = format (0, "/tmp/%s.pcap%c", stem, 0);
+ vec_free (stem);
+ }
pm->file_name = (char *) a->filename;
pm->n_packets_captured = 0;
pm->packet_type = PCAP_PACKET_TYPE_ethernet;
pm->n_packets_to_capture = a->packets_to_capture;
pp->pcap_sw_if_index = a->sw_if_index;
- pp->pcap_enable = 1;
+ if (a->filter)
+ pp->filter_classify_table_index = set->table_indices[0];
+ else
+ pp->filter_classify_table_index = ~0;
+ pp->pcap_rx_enable = a->rx_enable;
+ pp->pcap_tx_enable = a->tx_enable;
+ pp->pcap_drop_enable = a->drop_enable;
+ pp->max_bytes_per_pkt = a->max_bytes_per_pkt;
}
else
{
- pp->pcap_enable = 0;
+ pp->pcap_rx_enable = 0;
+ pp->pcap_tx_enable = 0;
+ pp->pcap_drop_enable = 0;
+ pp->filter_classify_table_index = ~0;
if (pm->n_packets_captured)
{
clib_error_t *error;
vlib_cli_output (vm, "Write %d packets to %s, and stop capture...",
pm->n_packets_captured, pm->file_name);
error = pcap_write (pm);
- if (pm->file_descriptor >= 0)
+ if (pm->flags & PCAP_MAIN_INIT_DONE)
pcap_close (pm);
/* Report I/O errors... */
if (error)
}
static clib_error_t *
-pcap_trace_command_internal (vlib_main_t * vm,
- unformat_input_t * input,
- vlib_cli_command_t * cmd, vlib_rx_or_tx_t rxtx)
+pcap_trace_command_fn (vlib_main_t * vm,
+ unformat_input_t * input, vlib_cli_command_t * cmd)
{
unformat_input_t _line_input, *line_input = &_line_input;
vnet_pcap_dispatch_trace_args_t _a, *a = &_a;
vnet_main_t *vnm = vnet_get_main ();
u8 *filename = 0;
u32 max = 1000;
+ u32 max_bytes_per_pkt = 512;
int rv;
- int enable = 0;
+ int rx_enable = 0;
+ int tx_enable = 0;
+ int drop_enable = 0;
int status = 0;
- u32 sw_if_index = 0;
+ int filter = 0;
+ u32 sw_if_index = ~0;
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
- if (unformat (line_input, "on %=", &enable, 1))
- ;
- else if (unformat (line_input, "enable %=", &enable, 1))
- ;
- else if (unformat (line_input, "off %=", &enable, 0))
- ;
- else if (unformat (line_input, "disable %=", &enable, 0))
+ if (unformat (line_input, "rx"))
+ rx_enable = 1;
+ else if (unformat (line_input, "tx"))
+ tx_enable = 1;
+ else if (unformat (line_input, "drop"))
+ drop_enable = 1;
+ else if (unformat (line_input, "off"))
+ rx_enable = tx_enable = drop_enable = 0;
+ else if (unformat (line_input, "max-bytes-per-pkt %u",
+ &max_bytes_per_pkt))
;
else if (unformat (line_input, "max %d", &max))
;
;
else if (unformat (line_input, "intfc any"))
sw_if_index = 0;
+ else if (unformat (line_input, "filter"))
+ filter = 1;
else
{
return clib_error_return (0, "unknown input `%U'",
/* no need for memset (a, 0, sizeof (*a)), set all fields here. */
a->filename = filename;
- a->enable = enable;
+ a->rx_enable = rx_enable;
+ a->tx_enable = tx_enable;
+ a->drop_enable = drop_enable;
a->status = status;
a->packets_to_capture = max;
- a->rxtx = rxtx;
a->sw_if_index = sw_if_index;
+ a->filter = filter;
+ a->max_bytes_per_pkt = max_bytes_per_pkt;
rv = vnet_pcap_dispatch_trace_configure (a);
case VNET_API_ERROR_NO_SUCH_ENTRY:
return clib_error_return (0, "No packets captured...");
+ case VNET_API_ERROR_INVALID_MEMORY_SIZE:
+ return clib_error_return (0,
+ "Max bytes per pkt must be > 32, < 9000...");
+
+ case VNET_API_ERROR_NO_SUCH_LABEL:
+ return clib_error_return
+ (0, "No classify filter configured, see 'classify filter...'");
+
default:
vlib_cli_output (vm, "WARNING: trace configure returned %d", rv);
break;
return 0;
}
-static clib_error_t *
-pcap_rx_trace_command_fn (vlib_main_t * vm,
- unformat_input_t * input, vlib_cli_command_t * cmd)
-{
- return pcap_trace_command_internal (vm, input, cmd, VLIB_RX);
-}
-
-static clib_error_t *
-pcap_tx_trace_command_fn (vlib_main_t * vm,
- unformat_input_t * input, vlib_cli_command_t * cmd)
-{
- return pcap_trace_command_internal (vm, input, cmd, VLIB_TX);
-}
-
-
/*?
* This command is used to start or stop a packet capture, or show
- * the status of packet capture. Note that both "pcap rx trace" and
- * "pcap tx trace" are implemented. The command syntax is identical,
- * simply substitute rx for tx as needed.
+ * the status of packet capture.
*
* This command has the following optional parameters:
*
- * - <b>on|off</b> - Used to start or stop a packet capture.
+ *
+ * - <b>rx</b> - Capture received packets
+ *
+ * - <b>tx</b> - Capture transmitted packets
+ *
+ * - <b>drop</b> - Capture dropped packets
+ *
+ * - <b>off</b> - Stop capturing packets, write results to the specified file
*
* - <b>max <nn></b> - Depth of local buffer. Once '<em>nn</em>' number
* of packets have been received, buffer is flushed to file. Once another
* to file, overwriting previous write. If not entered, value defaults
* to 100. Can only be updated if packet capture is off.
*
- * - <b>intfc <interface>|any</b> - Used to specify a given interface,
+ * - <b>max-bytes-per-pkt <nnnn></b> - Maximum number of bytes to capture
+ * for each packet. Must be >= 32, <= 9000.
+ *
+ * - <b>intfc <interface-name>|any</b> - Used to specify a given interface,
* or use '<em>any</em>' to run packet capture on all interfaces.
* '<em>any</em>' is the default if not provided. Settings from a previous
* packet capture are preserved, so '<em>any</em>' can be used to reset
* the interface setting.
*
+ * - <b>filter</b> - Use the pcap rx / tx / drop trace filter, which
+ * must be configured. Use <b>classify filter pcap...</b> to configure the
+ * filter. The filter will only be executed if the per-interface or
+ * any-interface tests fail.
+ *
* - <b>file <name></b> - Used to specify the output filename. The file will
* be placed in the '<em>/tmp</em>' directory, so only the filename is
* supported. Directory should not be entered. If file already exists, file
- * will be overwritten. If no filename is provided, '<em>/tmp/vpe.pcap</em>'
- * will be used. Can only be updated if packet capture is off.
+ * will be overwritten. If no filename is provided, the file will be
+ * named "/tmp/rx.pcap", "/tmp/tx.pcap", "/tmp/rxandtx.pcap", etc.
+ * Can only be updated if packet capture is off.
*
* - <b>status</b> - Displays the current status and configured attributes
* associated with a packet capture. If packet capture is in progress,
*
* @cliexpar
* Example of how to display the status of a tx packet capture when off:
- * @cliexstart{pcap tx trace status}
+ * @cliexstart{pcap trace status}
* max is 100, for any interface to file /tmp/vpe.pcap
* pcap tx capture is off...
* @cliexend
* Example of how to start a tx packet capture:
- * @cliexstart{pcap tx trace on max 35 intfc GigabitEthernet0/8/0 file vppTest.pcap}
- * pcap tx capture on...
+ * @cliexstart{pcap trace tx max 35 intfc GigabitEthernet0/8/0 file vppTest.pcap}
* @cliexend
* Example of how to display the status of a tx packet capture in progress:
- * @cliexstart{pcap tx trace status}
+ * @cliexstart{pcap trace status}
* max is 35, for interface GigabitEthernet0/8/0 to file /tmp/vppTest.pcap
* pcap tx capture is on: 20 of 35 pkts...
* @cliexend
* Example of how to stop a tx packet capture:
- * @cliexstart{vppctl pcap tx trace off}
+ * @cliexstart{pcap trace off}
* captured 21 pkts...
* saved to /tmp/vppTest.pcap...
* @cliexend
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (pcap_tx_trace_command, static) = {
- .path = "pcap tx trace",
- .short_help =
- "pcap tx trace [on|off] [max <nn>] [intfc <interface>|any] [file <name>] [status]",
- .function = pcap_tx_trace_command_fn,
-};
-VLIB_CLI_COMMAND (pcap_rx_trace_command, static) = {
- .path = "pcap rx trace",
+ .path = "pcap trace",
.short_help =
- "pcap rx trace [on|off] [max <nn>] [intfc <interface>|any] [file <name>] [status]",
- .function = pcap_rx_trace_command_fn,
+ "pcap trace rx tx drop off [max <nn>] [intfc <interface>|any] [file <name>] [status] [max-bytes-per-pkt <nnnn>][filter]",
+ .function = pcap_trace_command_fn,
};
/* *INDENT-ON* */
-
/*
* fd.io coding-style-patch-verification: ON
*
Code Review / vpp.git / blobdiff