called through a shared memory interface.
*/
-vl_api_version 1.0.0
+option version = "1.0.1";
/** \brief Add / del table request
A table can be added multiple times, but need be deleted only once.
typeonly manual_print manual_endian define fib_path
{
u32 sw_if_index;
+ u32 table_id;
u8 weight;
u8 preference;
u8 is_local;
/** \brief Dump IP neighboors
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param sw_if_index - the interface to dump neighboors
+ @param sw_if_index - the interface to dump neighboors, ~0 == all
@param is_ipv6 - [1|0] to indicate if address family is ipv[6|4]
*/
define ip_neighbor_dump
/** \brief IP neighboors dump response
@param context - sender context which was passed in the request
+ @param sw_if_index - The interface used to reach the neighbor
@param is_static - [1|0] to indicate if neighbor is statically configured
@param is_ipv6 - [1|0] to indicate if address family is ipv[6|4]
*/
define ip_neighbor_details {
u32 context;
+ u32 sw_if_index;
u8 is_static;
u8 is_ipv6;
u8 mac_address[6];
@param vrf_id - fib table /vrf associated with the route
@param lookup_in_vrf -
@param classify_table_index -
- @param create_vrf_if_needed -
@param is_add - 1 if adding the route, 0 if deleting
@param is_drop - Drop the packet
@param is_unreach - Drop the packet and rate limit send ICMP unreachable
@param is_prohibit - Drop the packet and rate limit send ICMP prohibited
@param is_ipv6 - 0 if an ip4 route, else ip6
- @param is_local -
+ @param is_local - The route will result in packets sent to VPP IP stack
+ @param is_udp_encap - The path describes a UDP-o-IP encapsulation.
@param is_classify -
@param is_multipath - Set to 1 if this is a multipath route, else 0
+ @param is_dvr - Does the route resolve via a DVR interface.
@param is_source_lookup - The the path is a deaggregate path (i.e. a lookup
in another table) is the lookup on the packet's
source address or destination.
- @param next_hop_weight -
+ @param next_hop_weight - Weight for Unequal cost multi-path
+ @param next_hop_preference - Path that are up that have the best preference are
+ are used for forwarding. lower value is better.
+ @param next_hop_id - Used when the path resolves via an object that has a unique
+ identifier.
@param dst_address_length -
@param dst_address[16] -
@param next_hop_address[16] -
u32 table_id;
u32 classify_table_index;
u32 next_hop_table_id;
- u8 create_vrf_if_needed;
+ u32 next_hop_id;
u8 is_add;
u8 is_drop;
u8 is_unreach;
u8 is_multipath;
u8 is_resolve_host;
u8 is_resolve_attached;
- u8 is_l2_bridged;
+ u8 is_dvr;
u8 is_source_lookup;
+ u8 is_udp_encap;
u8 next_hop_weight;
u8 next_hop_preference;
+ u8 next_hop_proto;
u8 dst_address_length;
u8 dst_address[16];
u8 next_hop_address[16];
@param context - sender context, to match reply w/ request
@param sw_if_index - software index of the new vlan's parent interface
@param vrf_id - fib table /vrf associated with the route
-
+ @param next_hop_afi - Use dpo_proto_t
FIXME
*/
autoreply define ip_mroute_add_del
u32 entry_flags;
u32 itf_flags;
u32 rpf_id;
+ u32 bier_imp;
u16 grp_address_length;
- u8 create_vrf_if_needed;
+ u8 next_hop_afi;
u8 is_add;
u8 is_ipv6;
u8 is_local;
u8 is_add;
};
+/** \brief Configure IP source and L4 port-range check
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_ip6 - 1 if source address type is IPv6
+ @param is_add - 1 if add, 0 if delete
+ @param mask_length - mask length for address entry
+ @param address - array of address bytes
+ @param number_of_ranges - length of low_port and high_port arrays (must match)
+ @param low_ports[32] - up to 32 low end of port range entries (must have corresponding high_ports entry)
+ @param high_ports[32] - up to 32 high end of port range entries (must have corresponding low_ports entry)
+ @param vrf_id - fib table/vrf id to associate the source and port-range check with
+ @note To specify a single port set low_port and high_port entry the same
+*/
+autoreply define ip_source_and_port_range_check_add_del
+{
+ u32 client_index;
+ u32 context;
+ u8 is_ipv6;
+ u8 is_add;
+ u8 mask_length;
+ u8 address[16];
+ u8 number_of_ranges;
+ u16 low_ports[32];
+ u16 high_ports[32];
+ u32 vrf_id;
+};
+
+/** \brief Set interface source and L4 port-range request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param interface_id - interface index
+ @param tcp_vrf_id - VRF associated with source and TCP port-range check
+ @param udp_vrf_id - VRF associated with source and TCP port-range check
+*/
+autoreply define ip_source_and_port_range_check_interface_add_del
+{
+ u32 client_index;
+ u32 context;
+ u8 is_add;
+ u32 sw_if_index;
+ u32 tcp_in_vrf_id;
+ u32 tcp_out_vrf_id;
+ u32 udp_in_vrf_id;
+ u32 udp_out_vrf_id;
+};
+
+/** \brief Register for ip4 arp resolution events
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param enable_disable - 1 => register for events, 0 => cancel registration
+ @param pid - sender's pid
+ @param address - the exact ip4 address of interest
+*/
+autoreply define want_ip4_arp_events
+{
+ u32 client_index;
+ u32 context;
+ u8 enable_disable;
+ u32 pid;
+ u32 address;
+};
+
+/** \brief Tell client about an ip4 arp resolution event
+ @param client_index - opaque cookie to identify the sender
+ @param address - the exact ip4 address of interest
+ @param pid - client pid registered to receive notification
+ @param sw_if_index - interface which received ARP packet
+ @param new_mac - the new mac address
+ @param mac_ip - 0: resolution event, 1: mac/ip binding in bd
+*/
+define ip4_arp_event
+{
+ u32 client_index;
+ u32 address;
+ u32 pid;
+ u32 sw_if_index;
+ u8 new_mac[6];
+ u8 mac_ip;
+};
+
+/** \brief Register for ip6 nd resolution events
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param enable_disable - 1 => register for events, 0 => cancel registration
+ @param pid - sender's pid
+ @param address - the exact ip6 address of interest
+*/
+autoreply define want_ip6_nd_events
+{
+ u32 client_index;
+ u32 context;
+ u8 enable_disable;
+ u32 pid;
+ u8 address[16];
+};
+
+/** \brief Tell client about an ip6 nd resolution or mac/ip event
+ @param client_index - opaque cookie to identify the sender
+ @param pid - client pid registered to receive notification
+ @param sw_if_index - interface which received ARP packet
+ @param address - the exact ip6 address of interest
+ @param new_mac - the new mac address
+ @param mac_ip - 0: resolution event, 1: mac/ip binding in bd
+*/
+define ip6_nd_event
+{
+ u32 client_index;
+ u32 pid;
+ u32 sw_if_index;
+ u8 address[16];
+ u8 new_mac[6];
+ u8 mac_ip;
+};
+
+/** \brief Proxy ARP add / del request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param vrf_id - VRF / Fib table ID
+ @param is_add - 1 if adding the Proxy ARP range, 0 if deleting
+ @param low_address[4] - Low address of the Proxy ARP range
+ @param hi_address[4] - High address of the Proxy ARP range
+*/
+autoreply define proxy_arp_add_del
+{
+ u32 client_index;
+ u32 context;
+ u32 vrf_id;
+ u8 is_add;
+ u8 low_address[4];
+ u8 hi_address[4];
+};
+
+/** \brief Proxy ARP add / del request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - Which interface to enable / disable Proxy Arp on
+ @param enable_disable - 1 to enable Proxy ARP on interface, 0 to disable
+*/
+autoreply define proxy_arp_intfc_enable_disable
+{
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ /* 1 = on, 0 = off */
+ u8 enable_disable;
+};
+
+/** \brief Reset fib table request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param vrf_id - vrf/table id of the fib table to reset
+ @param is_ipv6 - an ipv6 fib to reset if non-zero, else ipv4
+*/
+autoreply define reset_fib
+{
+ u32 client_index;
+ u32 context;
+ u32 vrf_id;
+ u8 is_ipv6;
+};
+
+/** \brief Set max allowed ARP or ip6 neighbor entries request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_ipv6 - neighbor limit if non-zero, else ARP limit
+ @param arp_neighbor_limit - the new limit, defaults are ~ 50k
+*/
+autoreply define set_arp_neighbor_limit
+{
+ u32 client_index;
+ u32 context;
+ u8 is_ipv6;
+ u32 arp_neighbor_limit;
+};
+
+/** \brief IOAM enable : Enable in-band OAM
+ @param id - profile id
+ @param seqno - To enable Seqno Processing
+ @param analyse - Enabling analysis of iOAM at decap node
+ @param pow_enable - Proof of Work enabled or not flag
+ @param trace_enable - iOAM Trace enabled or not flag
+*/
+autoreply define ioam_enable
+{
+ u32 client_index;
+ u32 context;
+ u16 id;
+ u8 seqno;
+ u8 analyse;
+ u8 pot_enable;
+ u8 trace_enable;
+ u32 node_id;
+};
+
+/** \brief iOAM disable
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param index - MAP Domain index
+*/
+autoreply define ioam_disable
+{
+ u32 client_index;
+ u32 context;
+ u16 id;
+};
+
+autoreply define ip_reassembly_set
+{
+ u32 client_index;
+ u32 context;
+ u32 timeout_ms;
+ u32 max_reassemblies;
+ u32 expire_walk_interval_ms;
+ u8 is_ip6;
+};
+
+define ip_reassembly_get
+{
+ u32 client_index;
+ u32 context;
+ u8 is_ip6;
+};
+
+define ip_reassembly_get_reply
+{
+ u32 client_index;
+ u32 context;
+ i32 retval;
+ u32 timeout_ms;
+ u32 max_reassemblies;
+ u32 expire_walk_interval_ms;
+ u8 is_ip6;
+};
+
/*
* Local Variables:
* eval: (c-set-style "gnu")
Code Review / vpp.git / blobdiff