+/* Hey Emacs use -*- mode: C -*- */
/*
- * Copyright (c) 2016 Cisco and/or its affiliates.
+ * Copyright (c) 2018 Cisco and/or its affiliates.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
called through a shared memory interface.
*/
-option version = "1.2.2";
+option version = "1.3.0";
+import "vnet/ip/ip_types.api";
import "vnet/fib/fib_types.api";
+import "vnet/ethernet/ethernet_types.api";
/** \brief Add / del table request
A table can be added multiple times, but need be deleted only once.
u8 address_length;
u8 address[4];
u32 count;
+ u32 stats_index;
vl_api_fib_path_t path[count];
};
u8 address_length;
u8 address[16];
u32 count;
+ u32 stats_index;
vl_api_fib_path_t path[count];
};
*/
define ip6nd_proxy_details
{
- u32 client_index;
u32 context;
u32 sw_if_index;
u8 address[16];
@param next_hop_out_label_stack - the next-hop output label stack, outer most first
@param next_hop_via_label - The next-hop is a resolved via a local label
*/
-autoreply define ip_add_del_route
+define ip_add_del_route
{
u32 client_index;
u32 context;
vl_api_fib_mpls_label_t next_hop_out_label_stack[next_hop_n_out_labels];
};
+define ip_add_del_route_reply
+{
+ u32 context;
+ i32 retval;
+ u32 stats_index;
+};
+
/** \brief Add / del route request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param next_hop_afi - Use dpo_proto_t
FIXME
*/
-autoreply define ip_mroute_add_del
+define ip_mroute_add_del
{
u32 client_index;
u32 context;
u8 nh_address[16];
};
+define ip_mroute_add_del_reply
+{
+ u32 context;
+ i32 retval;
+ u32 stats_index;
+};
+
/** \brief Dump IP multicast fib table
@param client_index - opaque cookie to identify the sender
*/
u8 grp_address[4];
u8 src_address[4];
u32 count;
+ u32 stats_index;
vl_api_fib_path_t path[count];
};
define ip_address_details
{
- u32 client_index;
u32 context;
u8 ip[16];
u8 prefix_length;
u8 is_ipv6;
};
-define ip_details
+/** \brief IP unnumbered configurations
+ @param sw_if_index The interface that has unnumbered configuration
+ @param ip_sw_if_index The IP interface that it is unnnumbered to
+*/
+define ip_unnumbered_details
{
+ u32 context;
u32 sw_if_index;
+ u32 ip_sw_if_index;
+};
+
+/** \brief Dump IP unnumbered configurations
+ @param sw_if_index ~0 for all interfaces, else the interface desired
+*/
+define ip_unnumbered_dump
+{
+ u32 client_index;
u32 context;
+ u32 sw_if_index;
+};
+
+define ip_details
+{
+ u32 context;
+ u32 sw_if_index;
u8 is_ipv6;
};
define mfib_signal_details
{
- u32 client_index;
u32 context;
u32 sw_if_index;
u32 table_id;
u32 udp_out_vrf_id;
};
+/** \brief Enable/disable periodic IP neighbor scan
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param mode - 0: disable, 1: IPv4, 2: IPv6, 3: both IPv4/v6
+ @param scan_interval - neighbor scan interval in minutes, 0: default to 1
+ @param max_proc_time - max processing time per run in usec, 0: default to 20
+ @param max_update - max neighbor probe/delete per run, 0: default to 10
+ @param scan_int_delay - delay in msec to resume scan if exceed max proc
+ time or update, 0: default to 1
+ @param stale_threshold - threshold in minutes for neighbor deletion,
+ 0: default to 4*scan_interval
+*/
+autoreply define ip_scan_neighbor_enable_disable
+{
+ u32 client_index;
+ u32 context;
+ u8 mode;
+ u8 scan_interval;
+ u8 max_proc_time;
+ u8 max_update;
+ u8 scan_int_delay;
+ u8 stale_threshold;
+};
+
/** \brief IP probe neighbor address on an interface by sending an
ARP request (for IP4) or ICMP6 Neighbor Solicitation (for IP6)
@param client_index - opaque cookie to identify the sender
events ip6_nd_event;
};
+/** \brief Proxy ARP configuration type
+ @param vrf_id - VRF / Fib table ID
+ @param low_address[4] - Low address of the Proxy ARP range
+ @param hi_address[4] - High address of the Proxy ARP range
+*/
+typeonly define proxy_arp
+{
+ u32 vrf_id;
+ u8 low_address[4];
+ u8 hi_address[4];
+};
+
/** \brief Proxy ARP add / del request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param vrf_id - VRF / Fib table ID
@param is_add - 1 if adding the Proxy ARP range, 0 if deleting
- @param low_address[4] - Low address of the Proxy ARP range
- @param hi_address[4] - High address of the Proxy ARP range
+ @param proxy - Proxy configuration
*/
autoreply define proxy_arp_add_del
{
u32 client_index;
u32 context;
- u32 vrf_id;
u8 is_add;
- u8 low_address[4];
- u8 hi_address[4];
+ vl_api_proxy_arp_t proxy;
};
-/** \brief Proxy ARP add / del request
+/** \brief Proxy ARP dump request
+ */
+define proxy_arp_dump
+{
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief Proxy ARP dump details reply
+ * @param proxy - Same data as used to configure
+ */
+define proxy_arp_details
+{
+ u32 context;
+ vl_api_proxy_arp_t proxy;
+};
+
+/** \brief Proxy ARP add / del interface request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - Which interface to enable / disable Proxy Arp on
u8 enable_disable;
};
+/** \brief Proxy ARP interface dump request
+ */
+define proxy_arp_intfc_dump
+{
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief Proxy ARP interface dump details reply
+ * @param sw_if_index The interface on which ARP proxy is enabled.
+ */
+define proxy_arp_intfc_details
+{
+ u32 context;
+ u32 sw_if_index;
+};
+
/** \brief Reset fib table request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
define ip_reassembly_get_reply
{
- u32 client_index;
u32 context;
i32 retval;
u32 timeout_ms;
Code Review / vpp.git / blobdiff