/** \file
This file defines vpp IP control-plane API messages which are generally
- called through a shared memory interface.
+ called through a shared memory interface.
*/
-option version = "3.0.0";
+option version = "3.0.2";
+import "vnet/interface_types.api";
import "vnet/fib/fib_types.api";
import "vnet/ethernet/ethernet_types.api";
import "vnet/mfib/mfib_types.api";
+import "vnet/interface_types.api";
/** \brief An IP table
@param is_ipv6 - V4 or V6 table
@param table_id - table ID associated with the route
- This table ID will apply to both the unicats
- and mlticast FIBs
+ This table ID will apply to both the unicast
+ and multicast FIBs
@param name - A client provided name/tag for the table. If this is
not set by the client, then VPP will generate something
- meaningfull.
+ meaningful.
*/
typedef ip_table
{
u32 table_id;
- u8 is_ip6;
- u8 name[64];
+ bool is_ip6;
+ string name[64];
};
/** \brief Add / del table request
{
u32 client_index;
u32 context;
- u8 is_add;
+ bool is_add [default=true];
vl_api_ip_table_t table;
};
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
- going to delete anything that already eixts.
- the CP delcartes the start of this procedure with this begin_replace
+ going to delete anything that already exists.
+ the CP declares the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
- the below end_replace API. From this point on it is of coursce free
+ the below end_replace API. From this point on it is of course free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
@param context - sender context
@param table - description of the table
*/
-manual_endian manual_print define ip_table_details
+define ip_table_details
{
u32 context;
vl_api_ip_table_t table;
{
u32 client_index;
u32 context;
- u8 is_add;
- u8 is_multipath;
+ bool is_add [default=true];
+ bool is_multipath;
vl_api_ip_route_t route;
};
define ip_route_add_del_reply
/** \brief IP FIB table entry response
@param route The route entry in the table
*/
-manual_endian manual_print define ip_route_details
+define ip_route_details
{
u32 context;
vl_api_ip_route_t route;
};
-/** \brief IP neighbor flags
- @param is_static - A static neighbor Entry - there are not flushed
- If the interface goes down.
- @param is_no_fib_entry - Do not create a corresponding entry in the FIB
- table for the neighbor.
-*/
-enum ip_neighbor_flags
-{
- IP_API_NEIGHBOR_FLAG_NONE = 0,
- IP_API_NEIGHBOR_FLAG_STATIC = 0x1,
- IP_API_NEIGHBOR_FLAG_NO_FIB_ENTRY = 0x2,
-};
-
-/** \brief IP neighbor
- @param sw_if_index - interface used to reach neighbor
- @param mac_address - l2 address of the neighbor
- @param ip_address - ip4 or ip6 address of the neighbor
- @param flags - flags for the nieghbor
-*/
-typedef ip_neighbor {
- u32 sw_if_index;
- vl_api_ip_neighbor_flags_t flags;
- vl_api_mac_address_t mac_address;
- vl_api_address_t ip_address;
-};
-
-/** \brief IP neighbor add / del request
+/** \brief Lookup IP route from a table
@param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param is_add - 1 to add neighbor, 0 to delete
- @param neighbor - the neighor to add/remove
+ @param table_id - The IP table to look the route up in
+ @param exact - 0 for normal route lookup, 1 for exact match only
+ @param prefix - The prefix (or host) for route lookup.
*/
-define ip_neighbor_add_del
+define ip_route_lookup
{
u32 client_index;
u32 context;
- /* 1 = add, 0 = delete */
- u8 is_add;
- vl_api_ip_neighbor_t neighbor;
-};
-define ip_neighbor_add_del_reply
-{
- u32 context;
- i32 retval;
- u32 stats_index;
+ u32 table_id;
+ u8 exact;
+ vl_api_prefix_t prefix;
};
-/** \brief Dump IP neighboors
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param sw_if_index - the interface to dump neighboors, ~0 == all
- @param is_ipv6 - [1|0] to indicate if address family is ipv[6|4]
+/** \brief IP FIB table lookup response
+ @param retval - return code of the lookup
+ @param route - The route entry in the table if found
*/
-define ip_neighbor_dump
+define ip_route_lookup_reply
{
- u32 client_index;
- u32 context;
- u32 sw_if_index;
- u8 is_ipv6;
-};
-
-/** \brief IP neighboors dump response
- @param context - sender context which was passed in the request
- @param neighbour - the neighbor
-*/
-define ip_neighbor_details {
u32 context;
- vl_api_ip_neighbor_t neighbor;
+ i32 retval;
+ vl_api_ip_route_t route;
};
/** \brief Set the ip flow hash config for a fib request
*/
autoreply define set_ip_flow_hash
{
+ option deprecated;
u32 client_index;
u32 context;
u32 vrf_id;
- u8 is_ipv6;
- u8 src;
- u8 dst;
- u8 sport;
- u8 dport;
- u8 proto;
- u8 reverse;
- u8 symmetric;
-};
-
-/** \brief IPv6 router advertisement config request
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param suppress -
- @param managed -
- @param other -
- @param ll_option -
- @param send_unicast -
- @param cease -
- @param is_no -
- @param default_router -
- @param max_interval -
- @param min_interval -
- @param lifetime -
- @param initial_count -
- @param initial_interval -
-*/
-autoreply define sw_interface_ip6nd_ra_config
-{
- u32 client_index;
- u32 context;
- u32 sw_if_index;
- u8 suppress;
- u8 managed;
- u8 other;
- u8 ll_option;
- u8 send_unicast;
- u8 cease;
- u8 is_no;
- u8 default_router;
- u32 max_interval;
- u32 min_interval;
- u32 lifetime;
- u32 initial_count;
- u32 initial_interval;
+ bool is_ipv6;
+ bool src;
+ bool dst;
+ bool sport;
+ bool dport;
+ bool proto;
+ bool reverse;
+ bool symmetric;
};
-/** \brief IPv6 router advertisement prefix config request
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param sw_if_index - The interface the RA prefix information is for
- @param prefix - The prefix to advertise
- @param use_default - Revert to default settings
- @param no_advertise - Do not advertise this prefix
- @param off_link - The prefix is off link (it is not configured on the interface)
- Configures the L-flag, When set, indicates that this
- prefix can be used for on-link determination.
- @param no_autoconfig - Setting for the A-flag. When
- set indicates that this prefix can be used for
- stateless address configuration.
- @param no_onlink - The prefix is not on link. Make sure this is consistent
- with the off_link parameter else YMMV
- @param is_no - add/delete
- @param val_lifetime - The length of time in
- seconds (relative to the time the packet is sent)
- that the prefix is valid for the purpose of on-link
- determination. A value of all one bits
- (0xffffffff) represents infinity
- @param pref_lifetime - The length of time in
- seconds (relative to the time the packet is sent)
- that addresses generated from the prefix via
- stateless address autoconfiguration remain
- preferred [ADDRCONF]. A value of all one bits
- (0xffffffff) represents infinity.
+/**
+ @brief flow hash settings for an IP table
+ @param src - include src in flow hash
+ @param dst - include dst in flow hash
+ @param sport - include sport in flow hash
+ @param dport - include dport in flow hash
+ @param proto - include proto in flow hash
+ @param reverse - include reverse in flow hash
+ @param symmetric - include symmetry in flow hash
+ @param flowlabel - include flowlabel in flow hash
*/
-autoreply define sw_interface_ip6nd_ra_prefix
+enumflag ip_flow_hash_config
{
- u32 client_index;
- u32 context;
- u32 sw_if_index;
- vl_api_prefix_t prefix;
- u8 use_default;
- u8 no_advertise;
- u8 off_link;
- u8 no_autoconfig;
- u8 no_onlink;
- u8 is_no;
- u32 val_lifetime;
- u32 pref_lifetime;
+ IP_API_FLOW_HASH_SRC_IP = 0x01,
+ IP_API_FLOW_HASH_DST_IP = 0x02,
+ IP_API_FLOW_HASH_SRC_PORT = 0x04,
+ IP_API_FLOW_HASH_DST_PORT = 0x08,
+ IP_API_FLOW_HASH_PROTO = 0x10,
+ IP_API_FLOW_HASH_REVERSE = 0x20,
+ IP_API_FLOW_HASH_SYMETRIC = 0x40,
+ IP_API_FLOW_HASH_FLOW_LABEL = 0x80,
};
-/** \brief IPv6 ND proxy config
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param sw_if_index - The interface the host is on
- @param address - The address of the host for which to proxy for
- @param is_add - Adding or deleting
-*/
-autoreply define ip6nd_proxy_add_del
+autoreply define set_ip_flow_hash_v2
{
u32 client_index;
u32 context;
- u32 sw_if_index;
- u8 is_del;
- vl_api_ip6_address_t ip;
-};
-
-/** \brief IPv6 ND proxy details returned after request
- @param context - sender context, to match reply w/ request
- @param retval - return code for the request
-*/
-define ip6nd_proxy_details
-{
- u32 context;
- u32 sw_if_index;
- vl_api_ip6_address_t ip;
-};
-
-/** \brief IPv6 ND proxy dump request
- @param context - sender context, to match reply w/ request
- @param retval - return code for the request
- @param sw_if_index - The interface the host is on
- @param address - The address of the host for which to proxy for
-*/
-define ip6nd_proxy_dump
-{
- u32 client_index;
- u32 context;
-};
-
-/** \brief Start / stop sending router solicitation
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param irt - initial retransmission time
- @param mrt - maximum retransmission time
- @param mrc - maximum retransmission count
- @param mrd - maximum retransmission duration
- @param sw_if_index - software interface index of interface
- for sending router solicitation
- @param stop - if non-zero then stop sending router solicitation,
- otherwise start sending router solicitation
-*/
-autoreply define ip6nd_send_router_solicitation
-{
- u32 client_index;
- u32 context;
- u32 irt;
- u32 mrt;
- u32 mrc;
- u32 mrd;
- u32 sw_if_index;
- u8 stop;
+ u32 table_id;
+ vl_api_address_family_t af;
+ vl_api_ip_flow_hash_config_t flow_hash_config;
};
/** \brief IPv6 interface enable / disable request
{
u32 client_index;
u32 context;
- u32 sw_if_index;
- u8 enable; /* set to true if enable */
-};
-
-/** \brief IPv6 set link local address on interface request
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param sw_if_index - interface to set link local on
- @param address[] - the new link local address
-*/
-autoreply define sw_interface_ip6_set_link_local_address
-{
- u32 client_index;
- u32 context;
- u32 sw_if_index;
- u8 address[16];
+ vl_api_interface_index_t sw_if_index;
+ bool enable; /* set to true if enable */
};
/** \brief Dump IP multicast fib table
typedef ip_mroute
{
u32 table_id;
- u32 entry_flags;
+ vl_api_mfib_entry_flags_t entry_flags;
u32 rpf_id;
vl_api_mprefix_t prefix;
u8 n_paths;
{
u32 client_index;
u32 context;
- u8 is_add;
- u8 is_multipath;
+ bool is_add [default=true];
+ bool is_multipath;
vl_api_ip_mroute_t route;
};
define ip_mroute_add_del_reply
/** \brief IP Multicast Route Details
@param route - Details of the route
*/
-manual_endian manual_print define ip_mroute_details
+define ip_mroute_details
{
u32 context;
vl_api_ip_mroute_t route;
define ip_address_details
{
u32 context;
- u32 sw_if_index;
+ vl_api_interface_index_t sw_if_index;
vl_api_address_with_prefix_t prefix;
};
{
u32 client_index;
u32 context;
- u32 sw_if_index;
- u8 is_ipv6;
+ vl_api_interface_index_t sw_if_index;
+ bool is_ipv6;
};
/** \brief IP unnumbered configurations
@param sw_if_index The interface that has unnumbered configuration
- @param ip_sw_if_index The IP interface that it is unnnumbered to
+ @param ip_sw_if_index The IP interface that it is unnumbered to
*/
define ip_unnumbered_details
{
u32 context;
- u32 sw_if_index;
- u32 ip_sw_if_index;
+ vl_api_interface_index_t sw_if_index;
+ vl_api_interface_index_t ip_sw_if_index;
};
/** \brief Dump IP unnumbered configurations
{
u32 client_index;
u32 context;
- u32 sw_if_index;
+ vl_api_interface_index_t sw_if_index [default=0xffffffff];
};
define ip_details
{
u32 context;
- u32 sw_if_index;
- u8 is_ipv6;
+ vl_api_interface_index_t sw_if_index;
+ bool is_ipv6;
};
define ip_dump
{
u32 client_index;
u32 context;
- u8 is_ipv6;
+ bool is_ipv6;
};
define mfib_signal_dump
define mfib_signal_details
{
u32 context;
- u32 sw_if_index;
+ vl_api_interface_index_t sw_if_index;
u32 table_id;
vl_api_mprefix_t prefix;
u16 ip_packet_len;
u32 client_index;
u32 context;
u32 policer_index;
- u8 is_add;
- u8 is_ip6;
+ bool is_add [default=true];
+ bool is_ip6;
};
/** \brief Punt redirect type
@param rx_sw_if_index - specify the original RX interface of traffic
that should be redirected. ~0 means any interface.
- @param tx_sw_if_index - the TX interface to which traffic shoulde be
+ @param tx_sw_if_index - the TX interface to which traffic should be
redirected.
@param nh - the next-hop to redirect the traffic to.
@param is_ipv6 - 1 for IPv6 neighbor, 0 for IPv4
*/
typedef punt_redirect
{
- u32 rx_sw_if_index;
- u32 tx_sw_if_index;
+ vl_api_interface_index_t rx_sw_if_index;
+ vl_api_interface_index_t tx_sw_if_index;
vl_api_address_t nh;
};
u32 client_index;
u32 context;
vl_api_punt_redirect_t punt;
- u8 is_add;
+ bool is_add [default=true];
};
define ip_punt_redirect_dump
{
u32 client_index;
u32 context;
- u32 sw_if_index;
- u8 is_ipv6;
+ vl_api_interface_index_t sw_if_index;
+ bool is_ipv6;
};
define ip_punt_redirect_details
u32 client_index;
u32 context;
vl_api_prefix_t pfx;
- u32 sw_if_index;
- u8 is_add;
+ vl_api_interface_index_t sw_if_index;
+ bool is_add [default=true];
};
define ip_container_proxy_dump
define ip_container_proxy_details
{
u32 context;
- u32 sw_if_index;
+ vl_api_interface_index_t sw_if_index;
vl_api_prefix_t prefix;
};
{
u32 client_index;
u32 context;
- u8 is_add;
+ bool is_add [default=true];
vl_api_prefix_t prefix;
u8 number_of_ranges;
u16 low_ports[32];
{
u32 client_index;
u32 context;
- u8 is_add;
- u32 sw_if_index;
+ bool is_add [default=true];
+ vl_api_interface_index_t sw_if_index;
u32 tcp_in_vrf_id;
u32 tcp_out_vrf_id;
u32 udp_in_vrf_id;
u32 udp_out_vrf_id;
};
-/** \brief Set interface source check request
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param is_add - add or del
- @param loose - strict or loose
- @param sw_if_index - interface index
-*/
-autoreply define ip_source_check_interface_add_del
-{
- u32 client_index;
- u32 context;
- u8 is_add;
- u8 loose;
- u32 sw_if_index;
-};
-
-/** \brief Enable/disable periodic IP neighbor scan
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param mode - 0: disable, 1: IPv4, 2: IPv6, 3: both IPv4/v6
- @param scan_interval - neighbor scan interval in minutes, 0: default to 1
- @param max_proc_time - max processing time per run in usec, 0: default to 20
- @param max_update - max neighbor probe/delete per run, 0: default to 10
- @param scan_int_delay - delay in msec to resume scan if exceed max proc
- time or update, 0: default to 1
- @param stale_threshold - threshold in minutes for neighbor deletion,
- 0: default to 4*scan_interval
-*/
-autoreply define ip_scan_neighbor_enable_disable
-{
- u32 client_index;
- u32 context;
- u8 mode;
- u8 scan_interval;
- u8 max_proc_time;
- u8 max_update;
- u8 scan_int_delay;
- u8 stale_threshold;
-};
-
-/** \brief IP probe neighbor address on an interface by sending an
- ARP request (for IP4) or ICMP6 Neighbor Solicitation (for IP6)
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param sw_if_index - interface index
- @param dst - target IP address to send IP addr resolution request
-*/
-autoreply define ip_probe_neighbor
-{
- u32 client_index;
- u32 context;
- u32 sw_if_index;
- vl_api_address_t dst;
-};
-
-/** \brief Register for IP4 ARP resolution event on receing ARP reply or
- MAC/IP info from ARP requests in L2 BDs
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param enable_disable - 1 => register for events, 0 => cancel registration
- @param pid - sender's pid
- @param ip - exact IP4 address of interested arp resolution event, or
- 0 to get MAC/IP info from ARP requests in BDs
-*/
-autoreply define want_ip4_arp_events
-{
- u32 client_index;
- u32 context;
- u8 enable_disable;
- u32 pid;
- vl_api_ip4_address_t ip;
-};
-
-/** \brief Tell client about an IP4 ARP resolution event or
- MAC/IP info from ARP requests in L2 BDs
- @param client_index - opaque cookie to identify the sender
- @param ip - the exact ip4 address of interest
- @param pid - client pid registered to receive notification
- @param sw_if_index - interface which received ARP packet
- @param mac - the new mac address
- @param mac_ip - 0: ARP resolution event, 1: MAC/IP info from L2 BDs
-*/
-define ip4_arp_event
-{
- u32 client_index;
- vl_api_ip4_address_t ip;
- u32 pid;
- u32 sw_if_index;
- vl_api_mac_address_t mac;
- u8 mac_ip;
-};
-
-service {
- rpc want_ip4_arp_events returns want_ip4_arp_events_reply
- events ip4_arp_event;
-};
-
-/** \brief Register for IP6 ND resolution event on recieving NA reply
- MAC/IP info from ICMP6 Neighbor Solicitation in L2 BDs
+/** \brief IPv6 set link local address on interface request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param enable_disable - 1 => register for events, 0 => cancel registration
- @param pid - sender's pid
- @param ip - the exact IP6 address of interested ND resolution event, or
- 0 to get MAC/IP info from ICMP6 NS in L2 BDs.
+ @param sw_if_index - interface to set link local on
+ @param ip - the new link local address
*/
-autoreply define want_ip6_nd_events
+autoreply define sw_interface_ip6_set_link_local_address
{
u32 client_index;
u32 context;
- u8 enable_disable;
- u32 pid;
- vl_api_ip6_address_t ip;
-};
-
-/** \brief Tell client about an IP6 ND resolution or
- MAC/IP info from ICMP6 Neighbor Solicitation in L2 BDs.
- @param client_index - opaque cookie to identify the sender
- @param pid - client pid registered to receive notification
- @param sw_if_index - interface which received ARP packet
- @param ip - the exact ip6 address of interest
- @param new_mac - the new mac address
- @param mac_ip - 0: ND resolution event, 1: MAC/IP info from L2 BDs
-*/
-define ip6_nd_event
-{
- u32 client_index;
- u32 pid;
- u32 sw_if_index;
+ vl_api_interface_index_t sw_if_index;
vl_api_ip6_address_t ip;
- vl_api_mac_address_t mac;
- u8 mac_ip;
-};
-
-service {
- rpc want_ip6_ra_events returns want_ip6_ra_events_reply
- events ip6_ra_event;
};
-/** \brief Register for ip6 router advertisement events
+/** \brief IPv6 get link local address on interface request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param enable_disable - 1 => register for events, 0 => cancel registration
- @param pid - sender's pid
-*/
-autoreply define want_ip6_ra_events
-{
- u32 client_index;
- u32 context;
- u8 enable_disable;
- u32 pid;
-};
-
-/** \brief Struct representing RA prefix info
- @param prefix - RA prefix info destination address
- @param flags - RA prefix info flags
- @param valid_time - RA prefix info valid time
- @param preferred_time - RA prefix info preferred time
-*/
-typedef ip6_ra_prefix_info
-{
- vl_api_prefix_t prefix;
- u8 flags;
- u32 valid_time;
- u32 preferred_time;
-};
-
-/** \brief Tell client about a router advertisement event
- @param client_index - opaque cookie to identify the sender
- @param pid - client pid registered to receive notification
- @param current_hop_limit - RA current hop limit
- @param flags - RA flags
- @param router_lifetime_in_sec - RA lifetime in seconds
- @param router_addr - The router's address
- @param neighbor_reachable_time_in_msec - RA neighbor reachable time in msec
- @param time_in_msec_between_retransmitted_neighbor_solicitations -
- time in msec between retransmitted neighbor solicitations
- @param n_prefixes -
- @param prefixes -
-*/
-define ip6_ra_event
-{
- u32 client_index;
- u32 pid;
- u32 sw_if_index;
- vl_api_ip6_address_t router_addr;
- u8 current_hop_limit;
- u8 flags;
- u16 router_lifetime_in_sec;
- u32 neighbor_reachable_time_in_msec;
- u32 time_in_msec_between_retransmitted_neighbor_solicitations;
- u32 n_prefixes;
- vl_api_ip6_ra_prefix_info_t prefixes[n_prefixes];
-};
-
-service {
- rpc want_ip6_nd_events returns want_ip6_nd_events_reply
- events ip6_nd_event;
-};
-
-/** \brief Proxy ARP configuration type
- @param table_id - VRF / Fib table ID
- @param low - Low address of the Proxy ARP range
- @param hi - High address of the Proxy ARP range
-*/
-typedef proxy_arp
-{
- u32 table_id;
- vl_api_ip4_address_t low;
- vl_api_ip4_address_t hi;
-};
-
-/** \brief Proxy ARP add / del request
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param is_add - 1 if adding the Proxy ARP range, 0 if deleting
- @param proxy - Proxy configuration
-*/
-autoreply define proxy_arp_add_del
-{
- u32 client_index;
- u32 context;
- u8 is_add;
- vl_api_proxy_arp_t proxy;
-};
-
-/** \brief Proxy ARP dump request
- */
-define proxy_arp_dump
-{
- u32 client_index;
- u32 context;
-};
-
-/** \brief Proxy ARP dump details reply
- * @param proxy - Same data as used to configure
- */
-define proxy_arp_details
-{
- u32 context;
- vl_api_proxy_arp_t proxy;
-};
-
-/** \brief Proxy ARP add / del interface request
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param sw_if_index - Which interface to enable / disable Proxy Arp on
- @param enable_disable - 1 to enable Proxy ARP on interface, 0 to disable
+ @param sw_if_index - interface to set link local on
*/
-autoreply define proxy_arp_intfc_enable_disable
+define sw_interface_ip6_get_link_local_address
{
u32 client_index;
u32 context;
- u32 sw_if_index;
- /* 1 = on, 0 = off */
- u8 enable_disable;
+ vl_api_interface_index_t sw_if_index;
};
-/** \brief Proxy ARP interface dump request
- */
-define proxy_arp_intfc_dump
-{
- u32 client_index;
- u32 context;
-};
-
-/** \brief Proxy ARP interface dump details reply
- * @param sw_if_index The interface on which ARP proxy is enabled.
- */
-define proxy_arp_intfc_details
-{
- u32 context;
- u32 sw_if_index;
-};
-
-/** \brief Set max allowed ARP or ip6 neighbor entries request
- @param client_index - opaque cookie to identify the sender
+/** \brief IPv6 link local address detail
@param context - sender context, to match reply w/ request
- @param is_ipv6 - neighbor limit if non-zero, else ARP limit
- @param arp_neighbor_limit - the new limit, defaults are ~ 50k
+ @param ip - the link local address
*/
-autoreply define set_arp_neighbor_limit
+define sw_interface_ip6_get_link_local_address_reply
{
- u32 client_index;
u32 context;
- u8 is_ipv6;
- u32 arp_neighbor_limit;
+ i32 retval;
+ vl_api_ip6_address_t ip;
};
/** \brief IOAM enable : Enable in-band OAM
@param id - profile id
@param seqno - To enable Seqno Processing
- @param analyse - Enabling analysis of iOAM at decap node
+ @param analyse - Enabling analysis of iOAM at decap node
@param pow_enable - Proof of Work enabled or not flag
@param trace_enable - iOAM Trace enabled or not flag
*/
u32 client_index;
u32 context;
u16 id;
- u8 seqno;
- u8 analyse;
- u8 pot_enable;
- u8 trace_enable;
+ bool seqno;
+ bool analyse;
+ bool pot_enable;
+ bool trace_enable;
u32 node_id;
};
u32 max_reassemblies;
u32 max_reassembly_length;
u32 expire_walk_interval_ms;
- u8 is_ip6;
+ bool is_ip6;
vl_api_ip_reass_type_t type;
};
{
u32 client_index;
u32 context;
- u8 is_ip6;
+ bool is_ip6;
vl_api_ip_reass_type_t type;
};
u32 max_reassemblies;
u32 max_reassembly_length;
u32 expire_walk_interval_ms;
- u8 is_ip6;
+ bool is_ip6;
};
/** \brief Enable/disable reassembly feature
{
u32 client_index;
u32 context;
- u32 sw_if_index;
- u8 enable_ip4;
- u8 enable_ip6;
+ vl_api_interface_index_t sw_if_index;
+ bool enable_ip4;
+ bool enable_ip6;
vl_api_ip_reass_type_t type;
};
Code Review / vpp.git / blobdiff