#include <vnet/ip/ip_packet.h>
#include <vnet/ip/ip4_packet.h>
#include <vnet/ip/ip6_packet.h>
+#include <vnet/fib/fib_node.h>
+#include <vnet/ethernet/arp_packet.h>
#include <vlib/cli.h>
#include <vnet/l2/l2_input.h>
#include <vnet/l2/l2_output.h>
return l2input_feat_names;
}
+u8 *
+format_l2_input_features (u8 * s, va_list * args)
+{
+ static char *display_names[] = {
+#define _(sym,name) #sym,
+ foreach_l2input_feat
+#undef _
+ };
+ u32 feature_bitmap = va_arg (*args, u32);
+
+ if (feature_bitmap == 0)
+ {
+ s = format (s, " none configured");
+ return s;
+ }
+
+ feature_bitmap &= ~L2INPUT_FEAT_DROP; /* Not a feature */
+ int i;
+ for (i = L2INPUT_N_FEAT; i >= 0; i--)
+ if (feature_bitmap & (1 << i))
+ s = format (s, "%10s (%s)\n", display_names[i], l2input_feat_names[i]);
+ return s;
+}
typedef struct
{
* set tx sw-if-handle
*/
- u16 ethertype;
- u8 protocol;
- l2_input_config_t *config;
- l2_bridge_domain_t *bd_config;
- u16 bd_index0;
- u32 feature_bitmap;
- u32 feat_mask;
- ethernet_header_t *h0;
- u8 *l3h0;
- u32 sw_if_index0;
-
-#define get_u16(addr) ( *((u16 *)(addr)) )
-
- sw_if_index0 = vnet_buffer (b0)->sw_if_index[VLIB_RX];
-
- h0 = vlib_buffer_get_current (b0);
- l3h0 = (u8 *) h0 + vnet_buffer (b0)->l2.l2_len;
-
- ethertype = clib_net_to_host_u16 (get_u16 (l3h0 - 2));
- feat_mask = ~0;
+ u32 feat_mask = ~0;
+ u32 sw_if_index0 = vnet_buffer (b0)->sw_if_index[VLIB_RX];
+ ethernet_header_t *h0 = vlib_buffer_get_current (b0);
/* Get config for the input interface */
- config = vec_elt_at_index (msm->configs, sw_if_index0);
+ l2_input_config_t *config = vec_elt_at_index (msm->configs, sw_if_index0);
/* Save split horizon group */
vnet_buffer (b0)->l2.shg = config->shg;
/* determine layer2 kind for stat and mask */
if (PREDICT_FALSE (ethernet_address_cast (h0->dst_address)))
{
- protocol = ((ip6_header_t *) l3h0)->protocol;
+ u8 *l3h0 = (u8 *) h0 + vnet_buffer (b0)->l2.l2_len;
+
+#define get_u16(addr) ( *((u16 *)(addr)) )
+ u16 ethertype = clib_net_to_host_u16 (get_u16 (l3h0 - 2));
+ u8 protocol = ((ip6_header_t *) l3h0)->protocol;
/* Disable bridge forwarding (flooding will execute instead if not xconnect) */
- feat_mask &= ~(L2INPUT_FEAT_FWD | L2INPUT_FEAT_UU_FLOOD);
+ feat_mask &= ~(L2INPUT_FEAT_FWD |
+ L2INPUT_FEAT_UU_FLOOD | L2INPUT_FEAT_GBP_FWD);
/* Disable ARP-term for non-ARP and non-ICMP6 packet */
if (ethertype != ETHERNET_TYPE_ARP &&
(ethertype != ETHERNET_TYPE_IP6 || protocol != IP_PROTOCOL_ICMP6))
feat_mask &= ~(L2INPUT_FEAT_ARP_TERM);
+
+ /*
+ * For packet from BVI - set SHG of ARP request or ICMPv6 neighbor
+ * solicitation packet from BVI to 0 so it can also flood to VXLAN
+ * tunnels or other ports with the same SHG as that of the BVI.
+ */
+ else if (PREDICT_FALSE (vnet_buffer (b0)->sw_if_index[VLIB_TX] ==
+ L2INPUT_BVI))
+ {
+ if (ethertype == ETHERNET_TYPE_ARP)
+ {
+ ethernet_arp_header_t *arp0 = (ethernet_arp_header_t *) l3h0;
+ if (arp0->opcode ==
+ clib_host_to_net_u16 (ETHERNET_ARP_OPCODE_request))
+ vnet_buffer (b0)->l2.shg = 0;
+ }
+ else /* must be ICMPv6 */
+ {
+ ip6_header_t *iph0 = (ip6_header_t *) l3h0;
+ icmp6_neighbor_solicitation_or_advertisement_header_t *ndh0;
+ ndh0 = ip6_next_header (iph0);
+ if (ndh0->icmp.type == ICMP6_neighbor_solicitation)
+ vnet_buffer (b0)->l2.shg = 0;
+ }
+ }
}
else
{
/*
- * Check for from-BVI processing - set SHG of unicast packets from BVI
- * to 0 so it is not dropped for VXLAN tunnels or other ports with the
+ * For packet from BVI - set SHG of unicast packet from BVI to 0 so it
+ * is not dropped on output to VXLAN tunnels or other ports with the
* same SHG as that of the BVI.
*/
if (PREDICT_FALSE (vnet_buffer (b0)->sw_if_index[VLIB_TX] ==
if (config->bridge)
{
/* Do bridge-domain processing */
- bd_index0 = config->bd_index;
+ u16 bd_index0 = config->bd_index;
/* save BD ID for next feature graph nodes */
vnet_buffer (b0)->l2.bd_index = bd_index0;
/* Get config for the bridge domain interface */
- bd_config = vec_elt_at_index (msm->bd_configs, bd_index0);
+ l2_bridge_domain_t *bd_config =
+ vec_elt_at_index (msm->bd_configs, bd_index0);
/* Save bridge domain and interface seq_num */
/* *INDENT-OFF* */
};
/* *INDENT-ON* */
vnet_buffer (b0)->l2.l2fib_sn = sn.as_u16;;
+ vnet_buffer (b0)->l2.bd_age = bd_config->mac_age;
/*
* Process bridge domain feature enables.
feat_mask = L2INPUT_FEAT_DROP;
/* mask out features from bitmap using packet type and bd config */
- feature_bitmap = config->feature_bitmap & feat_mask;
+ u32 feature_bitmap = config->feature_bitmap & feat_mask;
/* save for next feature graph nodes */
vnet_buffer (b0)->l2.feature_bitmap = feature_bitmap;
}
}
- vlib_node_increment_counter (vm, l2input_node.index,
- L2INPUT_ERROR_L2INPUT, 4);
-
classify_and_dispatch (msm, b0, &next0);
classify_and_dispatch (msm, b1, &next1);
classify_and_dispatch (msm, b2, &next2);
clib_memcpy (t->dst, h0->dst_address, 6);
}
- vlib_node_increment_counter (vm, l2input_node.index,
- L2INPUT_ERROR_L2INPUT, 1);
-
classify_and_dispatch (msm, b0, &next0);
/* verify speculative enqueue, maybe switch current next frame */
vlib_put_next_frame (vm, node, next_index, n_left_to_next);
}
+ vlib_node_increment_counter (vm, l2input_node.index,
+ L2INPUT_ERROR_L2INPUT, frame->n_vectors);
+
return frame->n_vectors;
}
return bd_config->feature_bitmap;
}
+void
+l2input_interface_mac_change (u32 sw_if_index,
+ const u8 * old_address, const u8 * new_address)
+{
+ /* check if the sw_if_index passed is a BVI in a BD */
+ l2_input_config_t *intf_config;
+
+ intf_config = l2input_intf_config (sw_if_index);
+
+ if (intf_config->bridge && intf_config->bvi)
+ {
+ /* delete and re-add l2fib entry for the bvi interface */
+ l2fib_del_entry (old_address, intf_config->bd_index, sw_if_index);
+ l2fib_add_entry (new_address,
+ intf_config->bd_index,
+ sw_if_index,
+ L2FIB_ENTRY_RESULT_FLAG_BVI |
+ L2FIB_ENTRY_RESULT_FLAG_STATIC);
+ }
+}
+
/**
* Set the subinterface to run in l2 or l3 mode.
* For L3 mode, just the sw_if_index is specified.
u32 mode, /* One of L2 modes or back to L3 mode */
u32 sw_if_index, /* sw interface index */
u32 bd_index, /* for bridged interface */
- u32 bvi, /* the bridged interface is the BVI */
+ l2_bd_port_type_t port_type, /* port_type */
u32 shg, /* the bridged interface split horizon group */
u32 xc_sw_if_index) /* peer interface for xconnect */
{
l2_output_config_t *out_config;
l2_input_config_t *config;
l2_bridge_domain_t *bd_config;
- u64 mac;
i32 l2_if_adjust = 0;
- u32 slot;
+ vnet_device_class_t *dev_class;
hi = vnet_get_sup_hw_interface (vnet_main, sw_if_index);
config = l2input_intf_config (sw_if_index);
/* undo any BVI-related config */
if (bd_config->bvi_sw_if_index == sw_if_index)
{
+ vnet_sw_interface_t *si;
+
bd_config->bvi_sw_if_index = ~0;
config->bvi = 0;
/* delete the l2fib entry for the bvi interface */
- mac = *((u64 *) hi->hw_address);
- l2fib_del_entry (mac, config->bd_index);
-
- /* Make loop output node send packet back to ethernet-input node */
- slot =
- vlib_node_add_named_next_with_slot (vm, hi->tx_node_index,
- "ethernet-input",
- VNET_SIMULATED_ETHERNET_TX_NEXT_ETHERNET_INPUT);
- ASSERT (slot == VNET_SIMULATED_ETHERNET_TX_NEXT_ETHERNET_INPUT);
+ l2fib_del_entry (hi->hw_address, config->bd_index, sw_if_index);
+
+ /* since this is a no longer BVI interface do not to flood to it */
+ si = vnet_get_sw_interface (vnm, sw_if_index);
+ si->flood_class = VNET_FLOOD_CLASS_NO_FLOOD;
+ }
+ if (bd_config->uu_fwd_sw_if_index == sw_if_index)
+ {
+ bd_config->uu_fwd_sw_if_index = ~0;
+ bd_config->feature_bitmap &= ~L2INPUT_FEAT_UU_FWD;
}
/* Clear MACs learned on the interface */
if (mode == MODE_L2_BRIDGE)
{
+ u8 member_flags;
+
/*
* Remove a check that the interface must be an Ethernet.
* Specifically so we can bridge to L3 tunnel interfaces.
* Enable forwarding, flooding, learning and ARP termination by default
* (note that ARP term is disabled on BD feature bitmap by default)
*/
- config->feature_bitmap |= L2INPUT_FEAT_FWD | L2INPUT_FEAT_UU_FLOOD |
- L2INPUT_FEAT_FLOOD | L2INPUT_FEAT_LEARN | L2INPUT_FEAT_ARP_TERM;
+ config->feature_bitmap |= (L2INPUT_FEAT_FWD |
+ L2INPUT_FEAT_UU_FLOOD |
+ L2INPUT_FEAT_UU_FWD |
+ L2INPUT_FEAT_FLOOD |
+ L2INPUT_FEAT_LEARN |
+ L2INPUT_FEAT_ARP_TERM);
/* Make sure last-chance drop is configured */
config->feature_bitmap |= L2INPUT_FEAT_DROP;
/* TODO: think: add l2fib entry even for non-bvi interface? */
/* Do BVI interface initializations */
- if (bvi)
+ if (L2_BD_PORT_TYPE_BVI == port_type)
{
+ vnet_sw_interface_t *si;
+
/* ensure BD has no bvi interface (or replace that one with this??) */
if (bd_config->bvi_sw_if_index != ~0)
{
config->bvi = 1;
/* create the l2fib entry for the bvi interface */
- mac = *((u64 *) hi->hw_address);
- l2fib_add_fwd_entry (mac, bd_index, sw_if_index, 1, 1); /* static + bvi */
+ l2fib_add_entry (hi->hw_address, bd_index, sw_if_index,
+ L2FIB_ENTRY_RESULT_FLAG_BVI |
+ L2FIB_ENTRY_RESULT_FLAG_STATIC);
/* Disable learning by default. no use since l2fib entry is static. */
config->feature_bitmap &= ~L2INPUT_FEAT_LEARN;
- /* Make loop output node send packet to l2-input node */
- slot =
- vlib_node_add_named_next_with_slot (vm, hi->tx_node_index,
- "l2-input",
- VNET_SIMULATED_ETHERNET_TX_NEXT_ETHERNET_INPUT);
- ASSERT (slot == VNET_SIMULATED_ETHERNET_TX_NEXT_ETHERNET_INPUT);
+ /* since this is a BVI interface we want to flood to it */
+ si = vnet_get_sw_interface (vnm, sw_if_index);
+ si->flood_class = VNET_FLOOD_CLASS_BVI;
+ member_flags = L2_FLOOD_MEMBER_BVI;
+ }
+ else if (L2_BD_PORT_TYPE_UU_FWD == port_type)
+ {
+ bd_config->uu_fwd_sw_if_index = sw_if_index;
+ bd_config->feature_bitmap |= L2INPUT_FEAT_UU_FWD;
+ }
+ else
+ {
+ member_flags = L2_FLOOD_MEMBER_NORMAL;
}
- /* Add interface to bridge-domain flood vector */
- l2_flood_member_t member = {
- .sw_if_index = sw_if_index,
- .flags = bvi ? L2_FLOOD_MEMBER_BVI : L2_FLOOD_MEMBER_NORMAL,
- .shg = shg,
- };
- bd_add_member (bd_config, &member);
-
+ if (L2_BD_PORT_TYPE_NORMAL == port_type ||
+ L2_BD_PORT_TYPE_BVI == port_type)
+ {
+ /* Add interface to bridge-domain flood vector */
+ l2_flood_member_t member = {
+ .sw_if_index = sw_if_index,
+ .flags = member_flags,
+ .shg = shg,
+ };
+ bd_add_member (bd_config, &member);
+ }
}
else if (mode == MODE_L2_XC)
{
/* Set up the L2/L3 flag in the interface parsing tables */
ethernet_sw_interface_set_l2_mode (vnm, sw_if_index, (mode != MODE_L3));
+ dev_class = vnet_get_device_class (vnet_main, hi->dev_class_index);
+ if (dev_class->set_l2_mode_function)
+ {
+ dev_class->set_l2_mode_function (vnet_main, hi, l2_if_adjust);
+ }
+
return 0;
}
unformat_input_t * input, vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
+ l2_bd_port_type_t port_type;
clib_error_t *error = 0;
u32 bd_index, bd_id;
u32 sw_if_index;
- u32 bvi;
u32 rc;
u32 shg;
bd_index = bd_find_or_add_bd_index (&bd_main, bd_id);
/* optional bvi */
- bvi = unformat (input, "bvi");
+ port_type = L2_BD_PORT_TYPE_NORMAL;
+ if (unformat (input, "bvi"))
+ port_type = L2_BD_PORT_TYPE_BVI;
+ if (unformat (input, "uu-fwd"))
+ port_type = L2_BD_PORT_TYPE_UU_FWD;
/* optional split horizon group */
shg = 0;
/* set the interface mode */
if ((rc =
- set_int_l2_mode (vm, vnm, MODE_L2_BRIDGE, sw_if_index, bd_index, bvi,
- shg, 0)))
+ set_int_l2_mode (vm, vnm, MODE_L2_BRIDGE, sw_if_index, bd_index,
+ port_type, shg, 0)))
{
if (rc == MODE_ERROR_ETH)
{
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (int_l2_bridge_cli, static) = {
.path = "set interface l2 bridge",
- .short_help = "set interface l2 bridge <interface> <bridge-domain-id> [bvi] [shg]",
+ .short_help = "set interface l2 bridge <interface> <bridge-domain-id> [bvi|uu-fwd] [shg]",
.function = int_l2_bridge,
};
/* *INDENT-ON* */
/* set the interface mode */
if (set_int_l2_mode
- (vm, vnm, MODE_L2_XC, sw_if_index, 0, 0, 0, xc_sw_if_index))
+ (vm, vnm, MODE_L2_XC, sw_if_index, 0, L2_BD_PORT_TYPE_NORMAL,
+ 0, xc_sw_if_index))
{
error = clib_error_return (0, "invalid configuration for interface",
format_unformat_error, input);
/*?
* Use this command put an interface into Layer 2 cross-connect mode.
- * Both interfaces must be in this mode for bi-directioal traffic. All
+ * Both interfaces must be in this mode for bi-directional traffic. All
* packets received on one interface will be transmitted to the other.
* To remove the Layer 2 cross-connect, put the interface in a different
* mode, for example Layer 3 mode.
}
/* set the interface mode */
- if (set_int_l2_mode (vm, vnm, MODE_L3, sw_if_index, 0, 0, 0, 0))
+ if (set_int_l2_mode (vm, vnm, MODE_L3, sw_if_index, 0,
+ L2_BD_PORT_TYPE_NORMAL, 0, 0))
{
error = clib_error_return (0, "invalid configuration for interface",
format_unformat_error, input);
}
/*?
- * Show the packet processing mode (Layer2 xcross-onnect, Layer 2 bridge,
+ * Show the packet processing mode (Layer2 cross-connect, Layer 2 bridge,
* Layer 3 routed) of all interfaces and sub-interfaces, or limit the
* output to just the provided list of interfaces and sub-interfaces.
* The output shows the mode, the interface, and if the interface is
- * a member of a bridge, the bridge-domain-id and the split horizen group (shg).
+ * a member of a bridge, the bridge-domain-id and the split horizon group (shg).
*
* @cliexpar
* Example of displaying the mode of all interfaces:
* l2 xconnect GigabitEthernet0/8/0.300 GigabitEthernet0/9/0.300
* l2 xconnect GigabitEthernet0/9/0.300 GigabitEthernet0/8/0.300
* @cliexend
- * Example of displaying the mode of a seleted list of interfaces:
+ * Example of displaying the mode of a selected list of interfaces:
* @cliexstart{show mode GigabitEthernet0/8/0 GigabitEthernet0/8/0.200}
* l3 GigabitEthernet0/8/0
* l2 bridge GigabitEthernet0/8/0.200 bd_id 200 shg 0
_(l2_input_classify_init) \
_(l2bd_init) \
_(l2fwd_init) \
-_(l2_inacl_init) \
+_(l2_in_out_acl_init) \
_(l2input_init) \
_(l2_vtr_init) \
_(l2_invtr_init) \
_(l2_efp_filter_init) \
_(l2learn_init) \
_(l2flood_init) \
-_(l2_outacl_init) \
_(l2output_init) \
_(l2_patch_init) \
_(l2_xcrw_init)
Code Review / vpp.git / blobdiff