from parameterized import parameterized
import scapy.compat
import scapy.layers.inet6 as inet6
+from scapy.layers.inet import UDP
from scapy.contrib.mpls import MPLS
from scapy.layers.inet6 import IPv6, ICMPv6ND_NS, ICMPv6ND_RS, \
ICMPv6ND_RA, ICMPv6NDOptMTU, ICMPv6NDOptSrcLLAddr, ICMPv6NDOptPrefixInfo, \
from framework import VppTestCase, VppTestRunner, tag_run_solo
from util import ppp, ip6_normalize, mk_ll_addr
from vpp_papi import VppEnum
-from vpp_ip import DpoProto, VppIpPuntPolicer, VppIpPuntRedirect
+from vpp_ip import DpoProto, VppIpPuntPolicer, VppIpPuntRedirect, VppIpPathMtu
from vpp_ip_route import VppIpRoute, VppRoutePath, find_route, VppIpMRoute, \
VppMRoutePath, VppMplsIpBind, \
VppMplsRoute, VppMplsTable, VppIpTable, FibPathType, FibPathProto, \
VppIpInterfaceAddress, find_route_in_dump, find_mroute_in_dump, \
VppIp6LinkLocalAddress
from vpp_neighbor import find_nbr, VppNeighbor
+from vpp_ipip_tun_interface import VppIpIpTunInterface
from vpp_pg_interface import is_ipv6_misc
from vpp_sub_interface import VppSubInterface, VppDot1QSubint
from vpp_policer import VppPolicer, PolicerAction
self.send_and_expect(self.pg1, [p_echo_request_3], self.pg1)
+class TestIPv6PathMTU(VppTestCase):
+ """ IPv6 Path MTU """
+
+ def setUp(self):
+ super(TestIPv6PathMTU, self).setUp()
+
+ self.create_pg_interfaces(range(2))
+
+ # setup all interfaces
+ for i in self.pg_interfaces:
+ i.admin_up()
+ i.config_ip6()
+ i.resolve_ndp()
+
+ def tearDown(self):
+ super(TestIPv6PathMTU, self).tearDown()
+ for i in self.pg_interfaces:
+ i.unconfig_ip6()
+ i.admin_down()
+
+ def test_path_mtu_local(self):
+ """ Path MTU for attached neighbour """
+
+ self.vapi.cli("set log class ip level debug")
+ #
+ # The goal here is not test that fragmentation works correctly,
+ # that's done elsewhere, the intent is to ensure that the Path MTU
+ # settings are honoured.
+ #
+
+ #
+ # IPv6 will only frag locally generated packets, so use tunnelled
+ # packets post encap
+ #
+ tun = VppIpIpTunInterface(
+ self,
+ self.pg1,
+ self.pg1.local_ip6,
+ self.pg1.remote_ip6)
+ tun.add_vpp_config()
+ tun.admin_up()
+ tun.config_ip6()
+
+ # set the interface MTU to a reasonable value
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [2800, 0, 0, 0])
+
+ p_2k = (Ether(dst=self.pg0.local_mac,
+ src=self.pg0.remote_mac) /
+ IPv6(src=self.pg0.remote_ip6,
+ dst=tun.remote_ip6) /
+ UDP(sport=1234, dport=5678) /
+ Raw(b'0xa' * 1000))
+ p_1k = (Ether(dst=self.pg0.local_mac,
+ src=self.pg0.remote_mac) /
+ IPv6(src=self.pg0.remote_ip6,
+ dst=tun.remote_ip6) /
+ UDP(sport=1234, dport=5678) /
+ Raw(b'0xa' * 600))
+
+ nbr = VppNeighbor(self,
+ self.pg1.sw_if_index,
+ self.pg1.remote_mac,
+ self.pg1.remote_ip6).add_vpp_config()
+
+ # this is now the interface MTU frags
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1)
+
+ # drop the path MTU for this neighbour to below the interface MTU
+ # expect more frags
+ pmtu = VppIpPathMtu(self, self.pg1.remote_ip6, 1300).add_vpp_config()
+
+ # print/format the adj delegate and trackers
+ self.logger.info(self.vapi.cli("sh ip pmtu"))
+ self.logger.info(self.vapi.cli("sh adj 7"))
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # increase the path MTU to more than the interface
+ # expect to use the interface MTU
+ pmtu.modify(8192)
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1)
+
+ # go back to an MTU from the path
+ pmtu.modify(1300)
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # raise the interface's MTU
+ # should still use that of the path
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [2000, 0, 0, 0])
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # set path high and interface low
+ pmtu.modify(2000)
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [1300, 0, 0, 0])
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # remove the path MTU
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [2800, 0, 0, 0])
+ pmtu.modify(0)
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1)
+
+ def test_path_mtu_remote(self):
+ """ Path MTU for remote neighbour """
+
+ self.vapi.cli("set log class ip level debug")
+ #
+ # The goal here is not test that fragmentation works correctly,
+ # that's done elsewhere, the intent is to ensure that the Path MTU
+ # settings are honoured.
+ #
+ tun_dst = "2001::1"
+
+ route = VppIpRoute(
+ self, tun_dst, 64,
+ [VppRoutePath(self.pg1.remote_ip6,
+ self.pg1.sw_if_index)]).add_vpp_config()
+
+ #
+ # IPv6 will only frag locally generated packets, so use tunnelled
+ # packets post encap
+ #
+ tun = VppIpIpTunInterface(
+ self,
+ self.pg1,
+ self.pg1.local_ip6,
+ tun_dst)
+ tun.add_vpp_config()
+ tun.admin_up()
+ tun.config_ip6()
+
+ # set the interface MTU to a reasonable value
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [2800, 0, 0, 0])
+
+ p_2k = (Ether(dst=self.pg0.local_mac,
+ src=self.pg0.remote_mac) /
+ IPv6(src=self.pg0.remote_ip6,
+ dst=tun.remote_ip6) /
+ UDP(sport=1234, dport=5678) /
+ Raw(b'0xa' * 1000))
+ p_1k = (Ether(dst=self.pg0.local_mac,
+ src=self.pg0.remote_mac) /
+ IPv6(src=self.pg0.remote_ip6,
+ dst=tun.remote_ip6) /
+ UDP(sport=1234, dport=5678) /
+ Raw(b'0xa' * 600))
+
+ nbr = VppNeighbor(self,
+ self.pg1.sw_if_index,
+ self.pg1.remote_mac,
+ self.pg1.remote_ip6).add_vpp_config()
+
+ # this is now the interface MTU frags
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1)
+
+ # drop the path MTU for this neighbour to below the interface MTU
+ # expect more frags
+ pmtu = VppIpPathMtu(self, tun_dst, 1300).add_vpp_config()
+
+ # print/format the fib entry/dpo
+ self.logger.info(self.vapi.cli("sh ip6 fib 2001::1"))
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # increase the path MTU to more than the interface
+ # expect to use the interface MTU
+ pmtu.modify(8192)
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1)
+
+ # go back to an MTU from the path
+ pmtu.modify(1300)
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # raise the interface's MTU
+ # should still use that of the path
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [2000, 0, 0, 0])
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # turn the tun_dst into an attached neighbour
+ route.modify([VppRoutePath("::",
+ self.pg1.sw_if_index)])
+ nbr2 = VppNeighbor(self,
+ self.pg1.sw_if_index,
+ self.pg1.remote_mac,
+ tun_dst).add_vpp_config()
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # add back to not attached
+ nbr2.remove_vpp_config()
+ route.modify([VppRoutePath(self.pg1.remote_ip6,
+ self.pg1.sw_if_index)])
+
+ # set path high and interface low
+ pmtu.modify(2000)
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [1300, 0, 0, 0])
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # remove the path MTU
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [2800, 0, 0, 0])
+ pmtu.remove_vpp_config()
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1)
+
+
if __name__ == '__main__':
unittest.main(testRunner=VppTestRunner)
Code Review / vpp.git / blobdiff