from parameterized import parameterized
import scapy.compat
import scapy.layers.inet6 as inet6
+from scapy.layers.inet import UDP
from scapy.contrib.mpls import MPLS
from scapy.layers.inet6 import IPv6, ICMPv6ND_NS, ICMPv6ND_RS, \
ICMPv6ND_RA, ICMPv6NDOptMTU, ICMPv6NDOptSrcLLAddr, ICMPv6NDOptPrefixInfo, \
from framework import VppTestCase, VppTestRunner, tag_run_solo
from util import ppp, ip6_normalize, mk_ll_addr
from vpp_papi import VppEnum
-from vpp_ip import DpoProto, VppIpPuntPolicer, VppIpPuntRedirect
+from vpp_ip import DpoProto, VppIpPuntPolicer, VppIpPuntRedirect, VppIpPathMtu
from vpp_ip_route import VppIpRoute, VppRoutePath, find_route, VppIpMRoute, \
VppMRoutePath, VppMplsIpBind, \
VppMplsRoute, VppMplsTable, VppIpTable, FibPathType, FibPathProto, \
VppIpInterfaceAddress, find_route_in_dump, find_mroute_in_dump, \
- VppIp6LinkLocalAddress
+ VppIp6LinkLocalAddress, VppIpRouteV2
from vpp_neighbor import find_nbr, VppNeighbor
+from vpp_ipip_tun_interface import VppIpIpTunInterface
from vpp_pg_interface import is_ipv6_misc
from vpp_sub_interface import VppSubInterface, VppDot1QSubint
-from vpp_policer import VppPolicer
+from vpp_policer import VppPolicer, PolicerAction
from ipaddress import IPv6Network, IPv6Address
AF_INET6 = socket.AF_INET6
# but not equal to the number sent, since some were policed
#
rx = self.pg1._get_capture(1)
+ stats = policer.get_stats()
+
+ # Single rate policer - expect conform, violate but no exceed
+ self.assertGreater(stats['conform_packets'], 0)
+ self.assertEqual(stats['exceed_packets'], 0)
+ self.assertGreater(stats['violate_packets'], 0)
+
self.assertGreater(len(rx), 0)
self.assertLess(len(rx), len(pkts))
self.assertEqual(str(punts[2].punt.nh), '::')
+class TestIP6PuntHandoff(IP6PuntSetup, VppTestCase):
+ """ IPv6 Punt Police/Redirect """
+ worker_config = "workers 2"
+
+ def setUp(self):
+ super(TestIP6PuntHandoff, self).setUp()
+ super(TestIP6PuntHandoff, self).punt_setup()
+
+ def tearDown(self):
+ super(TestIP6PuntHandoff, self).punt_teardown()
+ super(TestIP6PuntHandoff, self).tearDown()
+
+ def test_ip_punt(self):
+ """ IP6 punt policer thread handoff """
+ pkts = self.pkt * NUM_PKTS
+
+ #
+ # Configure a punt redirect via pg1.
+ #
+ nh_addr = self.pg1.remote_ip6
+ ip_punt_redirect = VppIpPuntRedirect(self, self.pg0.sw_if_index,
+ self.pg1.sw_if_index, nh_addr)
+ ip_punt_redirect.add_vpp_config()
+
+ action_tx = PolicerAction(
+ VppEnum.vl_api_sse2_qos_action_type_t.SSE2_QOS_ACTION_API_TRANSMIT,
+ 0)
+ #
+ # This policer drops no packets, we are just
+ # testing that they get to the right thread.
+ #
+ policer = VppPolicer(self, "ip6-punt", 400, 0, 10, 0, 1,
+ 0, 0, False, action_tx, action_tx, action_tx)
+ policer.add_vpp_config()
+ ip_punt_policer = VppIpPuntPolicer(self, policer.policer_index,
+ is_ip6=True)
+ ip_punt_policer.add_vpp_config()
+
+ for worker in [0, 1]:
+ self.send_and_expect(self.pg0, pkts, self.pg1, worker=worker)
+ if worker == 0:
+ self.logger.debug(self.vapi.cli("show trace max 100"))
+
+ # Combined stats, all threads
+ stats = policer.get_stats()
+
+ # Single rate policer - expect conform, violate but no exceed
+ self.assertGreater(stats['conform_packets'], 0)
+ self.assertEqual(stats['exceed_packets'], 0)
+ self.assertGreater(stats['violate_packets'], 0)
+
+ # Worker 0, should have done all the policing
+ stats0 = policer.get_stats(worker=0)
+ self.assertEqual(stats, stats0)
+
+ # Worker 1, should have handed everything off
+ stats1 = policer.get_stats(worker=1)
+ self.assertEqual(stats1['conform_packets'], 0)
+ self.assertEqual(stats1['exceed_packets'], 0)
+ self.assertEqual(stats1['violate_packets'], 0)
+
+ # Bind the policer to worker 1 and repeat
+ policer.bind_vpp_config(1, True)
+ for worker in [0, 1]:
+ self.send_and_expect(self.pg0, pkts, self.pg1, worker=worker)
+ self.logger.debug(self.vapi.cli("show trace max 100"))
+
+ # The 2 workers should now have policed the same amount
+ stats = policer.get_stats()
+ stats0 = policer.get_stats(worker=0)
+ stats1 = policer.get_stats(worker=1)
+
+ self.assertGreater(stats0['conform_packets'], 0)
+ self.assertEqual(stats0['exceed_packets'], 0)
+ self.assertGreater(stats0['violate_packets'], 0)
+
+ self.assertGreater(stats1['conform_packets'], 0)
+ self.assertEqual(stats1['exceed_packets'], 0)
+ self.assertGreater(stats1['violate_packets'], 0)
+
+ self.assertEqual(stats0['conform_packets'] + stats1['conform_packets'],
+ stats['conform_packets'])
+
+ self.assertEqual(stats0['violate_packets'] + stats1['violate_packets'],
+ stats['violate_packets'])
+
+ # Unbind the policer and repeat
+ policer.bind_vpp_config(1, False)
+ for worker in [0, 1]:
+ self.send_and_expect(self.pg0, pkts, self.pg1, worker=worker)
+ self.logger.debug(self.vapi.cli("show trace max 100"))
+
+ # The policer should auto-bind to worker 0 when packets arrive
+ stats = policer.get_stats()
+ stats0new = policer.get_stats(worker=0)
+ stats1new = policer.get_stats(worker=1)
+
+ self.assertGreater(stats0new['conform_packets'],
+ stats0['conform_packets'])
+ self.assertEqual(stats0new['exceed_packets'], 0)
+ self.assertGreater(stats0new['violate_packets'],
+ stats0['violate_packets'])
+
+ self.assertEqual(stats1, stats1new)
+
+ #
+ # Clean up
+ #
+ ip_punt_policer.remove_vpp_config()
+ policer.remove_vpp_config()
+ ip_punt_redirect.remove_vpp_config()
+
+
class TestIPDeag(VppTestCase):
""" IPv6 Deaggregate Routes """
self.send_and_expect(self.pg1, [p_echo_request_3], self.pg1)
+class TestIPv6PathMTU(VppTestCase):
+ """ IPv6 Path MTU """
+
+ def setUp(self):
+ super(TestIPv6PathMTU, self).setUp()
+
+ self.create_pg_interfaces(range(2))
+
+ # setup all interfaces
+ for i in self.pg_interfaces:
+ i.admin_up()
+ i.config_ip6()
+ i.resolve_ndp()
+
+ def tearDown(self):
+ super(TestIPv6PathMTU, self).tearDown()
+ for i in self.pg_interfaces:
+ i.unconfig_ip6()
+ i.admin_down()
+
+ def test_path_mtu_local(self):
+ """ Path MTU for attached neighbour """
+
+ self.vapi.cli("set log class ip level debug")
+ #
+ # The goal here is not test that fragmentation works correctly,
+ # that's done elsewhere, the intent is to ensure that the Path MTU
+ # settings are honoured.
+ #
+
+ #
+ # IPv6 will only frag locally generated packets, so use tunnelled
+ # packets post encap
+ #
+ tun = VppIpIpTunInterface(
+ self,
+ self.pg1,
+ self.pg1.local_ip6,
+ self.pg1.remote_ip6)
+ tun.add_vpp_config()
+ tun.admin_up()
+ tun.config_ip6()
+
+ # set the interface MTU to a reasonable value
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [2800, 0, 0, 0])
+
+ p_2k = (Ether(dst=self.pg0.local_mac,
+ src=self.pg0.remote_mac) /
+ IPv6(src=self.pg0.remote_ip6,
+ dst=tun.remote_ip6) /
+ UDP(sport=1234, dport=5678) /
+ Raw(b'0xa' * 1000))
+ p_1k = (Ether(dst=self.pg0.local_mac,
+ src=self.pg0.remote_mac) /
+ IPv6(src=self.pg0.remote_ip6,
+ dst=tun.remote_ip6) /
+ UDP(sport=1234, dport=5678) /
+ Raw(b'0xa' * 600))
+
+ nbr = VppNeighbor(self,
+ self.pg1.sw_if_index,
+ self.pg1.remote_mac,
+ self.pg1.remote_ip6).add_vpp_config()
+
+ # this is now the interface MTU frags
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1)
+
+ # drop the path MTU for this neighbour to below the interface MTU
+ # expect more frags
+ pmtu = VppIpPathMtu(self, self.pg1.remote_ip6, 1300).add_vpp_config()
+
+ # print/format the adj delegate and trackers
+ self.logger.info(self.vapi.cli("sh ip pmtu"))
+ self.logger.info(self.vapi.cli("sh adj 7"))
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # increase the path MTU to more than the interface
+ # expect to use the interface MTU
+ pmtu.modify(8192)
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1)
+
+ # go back to an MTU from the path
+ pmtu.modify(1300)
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # raise the interface's MTU
+ # should still use that of the path
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [2000, 0, 0, 0])
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # set path high and interface low
+ pmtu.modify(2000)
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [1300, 0, 0, 0])
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # remove the path MTU
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [2800, 0, 0, 0])
+ pmtu.modify(0)
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1)
+
+ def test_path_mtu_remote(self):
+ """ Path MTU for remote neighbour """
+
+ self.vapi.cli("set log class ip level debug")
+ #
+ # The goal here is not test that fragmentation works correctly,
+ # that's done elsewhere, the intent is to ensure that the Path MTU
+ # settings are honoured.
+ #
+ tun_dst = "2001::1"
+
+ route = VppIpRoute(
+ self, tun_dst, 64,
+ [VppRoutePath(self.pg1.remote_ip6,
+ self.pg1.sw_if_index)]).add_vpp_config()
+
+ #
+ # IPv6 will only frag locally generated packets, so use tunnelled
+ # packets post encap
+ #
+ tun = VppIpIpTunInterface(
+ self,
+ self.pg1,
+ self.pg1.local_ip6,
+ tun_dst)
+ tun.add_vpp_config()
+ tun.admin_up()
+ tun.config_ip6()
+
+ # set the interface MTU to a reasonable value
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [2800, 0, 0, 0])
+
+ p_2k = (Ether(dst=self.pg0.local_mac,
+ src=self.pg0.remote_mac) /
+ IPv6(src=self.pg0.remote_ip6,
+ dst=tun.remote_ip6) /
+ UDP(sport=1234, dport=5678) /
+ Raw(b'0xa' * 1000))
+ p_1k = (Ether(dst=self.pg0.local_mac,
+ src=self.pg0.remote_mac) /
+ IPv6(src=self.pg0.remote_ip6,
+ dst=tun.remote_ip6) /
+ UDP(sport=1234, dport=5678) /
+ Raw(b'0xa' * 600))
+
+ nbr = VppNeighbor(self,
+ self.pg1.sw_if_index,
+ self.pg1.remote_mac,
+ self.pg1.remote_ip6).add_vpp_config()
+
+ # this is now the interface MTU frags
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1)
+
+ # drop the path MTU for this neighbour to below the interface MTU
+ # expect more frags
+ pmtu = VppIpPathMtu(self, tun_dst, 1300).add_vpp_config()
+
+ # print/format the fib entry/dpo
+ self.logger.info(self.vapi.cli("sh ip6 fib 2001::1"))
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # increase the path MTU to more than the interface
+ # expect to use the interface MTU
+ pmtu.modify(8192)
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1)
+
+ # go back to an MTU from the path
+ pmtu.modify(1300)
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # raise the interface's MTU
+ # should still use that of the path
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [2000, 0, 0, 0])
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # turn the tun_dst into an attached neighbour
+ route.modify([VppRoutePath("::",
+ self.pg1.sw_if_index)])
+ nbr2 = VppNeighbor(self,
+ self.pg1.sw_if_index,
+ self.pg1.remote_mac,
+ tun_dst).add_vpp_config()
+
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # add back to not attached
+ nbr2.remove_vpp_config()
+ route.modify([VppRoutePath(self.pg1.remote_ip6,
+ self.pg1.sw_if_index)])
+
+ # set path high and interface low
+ pmtu.modify(2000)
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [1300, 0, 0, 0])
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2)
+
+ # remove the path MTU
+ self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index,
+ [2800, 0, 0, 0])
+ pmtu.remove_vpp_config()
+ self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2)
+ self.send_and_expect(self.pg0, [p_1k], self.pg1)
+
+
+class TestIPFibSource(VppTestCase):
+ """ IPv6 Table FibSource """
+
+ @classmethod
+ def setUpClass(cls):
+ super(TestIPFibSource, cls).setUpClass()
+
+ @classmethod
+ def tearDownClass(cls):
+ super(TestIPFibSource, cls).tearDownClass()
+
+ def setUp(self):
+ super(TestIPFibSource, self).setUp()
+
+ self.create_pg_interfaces(range(2))
+
+ for i in self.pg_interfaces:
+ i.admin_up()
+ i.config_ip6()
+ i.resolve_arp()
+ i.generate_remote_hosts(2)
+ i.configure_ipv6_neighbors()
+
+ def tearDown(self):
+ super(TestIPFibSource, self).tearDown()
+ for i in self.pg_interfaces:
+ i.admin_down()
+ i.unconfig_ip4()
+
+ def test_fib_source(self):
+ """ IP Table FibSource """
+
+ routes = self.vapi.ip_route_v2_dump(0, True)
+
+ # 2 interfaces (4 routes) + 2 specials + 4 neighbours = 10 routes
+ self.assertEqual(len(routes), 10)
+
+ # dump all the sources in the FIB
+ sources = self.vapi.fib_source_dump()
+ for source in sources:
+ if (source.src.name == "API"):
+ api_source = source.src
+ if (source.src.name == "interface"):
+ intf_source = source.src
+ if (source.src.name == "adjacency"):
+ adj_source = source.src
+ if (source.src.name == "special"):
+ special_source = source.src
+ if (source.src.name == "default-route"):
+ dr_source = source.src
+
+ # dump the individual route types
+ routes = self.vapi.ip_route_v2_dump(0, True, src=adj_source.id)
+ self.assertEqual(len(routes), 4)
+ routes = self.vapi.ip_route_v2_dump(0, True, src=intf_source.id)
+ self.assertEqual(len(routes), 4)
+ routes = self.vapi.ip_route_v2_dump(0, True, src=special_source.id)
+ self.assertEqual(len(routes), 1)
+ routes = self.vapi.ip_route_v2_dump(0, True, src=dr_source.id)
+ self.assertEqual(len(routes), 1)
+
+ # add a new soure that'a better than the API
+ self.vapi.fib_source_add(src={'name': "bgp",
+ "priority": api_source.priority - 1})
+
+ # dump all the sources to check our new one is there
+ sources = self.vapi.fib_source_dump()
+
+ for source in sources:
+ if (source.src.name == "bgp"):
+ bgp_source = source.src
+
+ self.assertTrue(bgp_source)
+ self.assertEqual(bgp_source.priority,
+ api_source.priority - 1)
+
+ # add a route with the default API source
+ r1 = VppIpRouteV2(
+ self, "2001::1", 128,
+ [VppRoutePath(self.pg0.remote_ip6,
+ self.pg0.sw_if_index)]).add_vpp_config()
+
+ r2 = VppIpRouteV2(self, "2001::1", 128,
+ [VppRoutePath(self.pg1.remote_ip6,
+ self.pg1.sw_if_index)],
+ src=bgp_source.id).add_vpp_config()
+
+ # ensure the BGP source takes priority
+ p = (Ether(src=self.pg0.remote_mac,
+ dst=self.pg0.local_mac) /
+ IPv6(src=self.pg0.remote_ip6, dst="2001::1") /
+ inet6.UDP(sport=1234, dport=1234) /
+ Raw(b'\xa5' * 100))
+
+ self.send_and_expect(self.pg0, [p], self.pg1)
+
+ r2.remove_vpp_config()
+ r1.remove_vpp_config()
+
+ self.assertFalse(find_route(self, "2001::1", 128))
+
+
if __name__ == '__main__':
unittest.main(testRunner=VppTestRunner)
Code Review / vpp.git / blobdiff