VPP-321: Fix wrong checking of LISP mapping local flag

Change-Id: Ia1d5a53742a5ebe34566de0a68c2d0a81e002ffa
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>

Rename DPDK-16.07 patch file from 0007... to 0008... to avoid conflict

There are now two 0007... patch files. So renaming one to 0008...

Change-Id: I82ab883db3436b1fce6b169065b257df052fe63c
Signed-off-by: John Lo <loj@cisco.com>

VPP-223 Document vlib cooperative multi-tasking threads

Change-Id: I283963b004ed6d91133e7e36811f75834280bbe7
Signed-off-by: Dave Barach <dave@barachs.net>

VPP-189 Fix coverity warnings

Change-Id: Iea6d338e60a95f7f30c10c2e751d4827e816f700
Signed-off-by: Dave Barach <dave@barachs.net>

VPP-189 Fix coverity warnings

in api_format.c.

Change-Id: Iedc510fe962b6e8fb8614be4038e695b13e12ef9
Signed-off-by: Dave Barach <dave@barachs.net>

VPP-315: Fix "show vxlan-gpe" issue

Change-Id: If721d3b701a7182e595ece1294c2767981d29d3e
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>

VPP-313: Wrong API dump message in vxlan_add_del_tunnel

Fix API custom-dump format of ip4/ip6 addresses in the message.

Change-Id: I822e036691846ce6a437834df933c44098944c1f
Signed-off-by: John Lo <loj@cisco.com>

DPDK: Fix a crash in igb_uio driver when the device is removed.

This crash happens because the device still has MSI configured,
the fix is to free the IRQ. Adding pending further investigation.

Change-Id: Ifcd3404fcc25fe27dcccc67d0dcf9d8f0ec18582
Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>

Temporarily disable unthrottled log message from DPDK 16.07

Patch to prevent the unthrottled message from spilling to syslog and
fill up disk space.

Change-Id: I239ca27a7568182217a675692e0be966fc3486f5
Signed-off-by: John Lo <loj@cisco.com>

VPP-314: Vxlan wrong name of decap node

Fix VXLAN decap node counter update using the correct node index.

Change-Id: Iebfd2bfd97747bc6d0758f4c5829e23ef9899d74
Signed-off-by: John Lo <loj@cisco.com>

dpdk: allow applications to override rte delay

Some applications may wish to define their own implentation of
usec delay other than the existing blocking one. The default
behavior remains unchanged.

Change-Id: I6cb626e7a5d9d985928aa266e522a849d264a2b2
Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>

VPP-245 Coding standards cleanup for vnet/vnet/cdp

Change-Id: I5253c52eace4b635f7791aa019ab01ec55d7fb4d
Signed-off-by: Dave Barach <dave@barachs.net>

Revert "Custom adjacency formatting fix"

This reverts commit ffc7ecace8304217104a5eade163aff5f8903935.

Change-Id: I32784a3e7ddf57abb9d70aa1e06884f028d78397
Signed-off-by: Keith Burns <alagalah@gmail.com>

Custom adjacency formatting fix

Looks like something strange is going on with indentation.

Change-Id: I1522caffa3a8a5e3aa00e1169b7469facc505a8d
Signed-off-by: Pierre Pfister <ppfister@cisco.com>

VPP-256 - Coding style cleanup vnet/vnet/ipsec

Change-Id: Ie9e05e2c74e7843a937870e2c64db0499f03a6a4
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

VPP-235: fixed vat help message for sw_interface_set_l2_bridge

Change-Id: Ie2a771abbd579c4ffd9679c157dcf435d91ebf7b
Signed-off-by: Calvin <calvin.ference@gmail.com>

Rename flow_report_sample.c/.h files

Change-Id: I1f82e74977de8879dec9859275afc791f0a55606
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>

VPP-189 - Coverity OVERRUN error in port-range

Change-Id: Ib9f43dffa9d04478d92063b71dd7bef4ac6969f1
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

DPDK: adding patch to init ptype in vmxnet3, e1000 and virtio PMDs

Ensure the packet_type is reset before the buffer is used.
This can cause packets to be mishandled in systems with more than one type of driver in use.

Change-Id: I14ef9bd6be834d66d19bae36122b648450a9f7e6
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>

VPP-189 Fix Coverity warnings

Remove a bunch of historical SMP code that we're not using; clean up
coverity warnings as a side-effect.

Change-Id: Ic80d2f87c7fd4e654078cac23ad5ec287a1d7ffe
Signed-off-by: Dave Barach <dave@barachs.net>

VPP-239 Tag packets that hit LISP negative adjacencies

Change-Id: I88eaf23791d0a148513cc32262cd79a7f4e25d1f
Signed-off-by: Florin Coras <fcoras@cisco.com>

VPP-189 Fix new Coverity warnings

Change-Id: I2a580320118d9ab638d9ac0986544ebad8d50e67
Signed-off-by: Florin Coras <fcoras@cisco.com>

VPP-189 Clean up more coverity warnings

Change-Id: If66713d79c545c762c385faf08cc809347741152
Signed-off-by: Dave Barach <dave@barachs.net>

VPP-263 - Coding standards cleanup - vnet/vnet/map

Change-Id: I401124320a21e30b5cdf3684d36890e51a2fcb6c
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

VPP-311 Coding standards cleanup for vnet/vnet/*.[ch]

Change-Id: I08ed983f594072bc8c72202e77205a7789eea599
Signed-off-by: Dave Barach <dave@barachs.net>

Update CSIT tests 160731 -> 160807

- update of CSIT operational branch to be used for VPP-patch test

Change-Id: If21641bfa958f06a61e5b3534ed1fe809de4eca3
Signed-off-by: Jan <jgelety@cisco.com>

DPDK: adding patch to revert ptype change to ixgbe vpmd

Commit d9a2009a81089093645fea2e04b51dd37edf3e6f on DPDK.org, reverted the ptype functionality
from the ixgbe vPMD. Reverting this change pending a deeper analysis.

Change-Id: I2515f3d700b2a4922495ba9e63f202d679543d01
Signed-off-by: Ray <ray.kinsella@intel.com>

VPP-243 - Coding style changes - updated emacs LISP styleify

Change-Id: I46ae6badcccd14c0e34f1a19187749980baba3ac
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

VPP-303 vnet/vnet/sr docs

Change-Id: I66eff733dff5e7eb2fa429dcdbb2b6b82423d25c
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

VPP-244 - Coding style cleanup vnet/vnet/sr

Change-Id: Ibbbaeacf9816ee0e7847cd53b45f9db48bddc85b
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

VPP-241: Add custom dump functions for LISP

Change-Id: I4ad86190b8f23a992a00f536492ba4f8caefeb43
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>

Add DPDK definition to DOXYGEN

Change-Id: I04e8663b49b5f706940b7aada0a7c2cae913a82b
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

VPP-242: Fix wrong checking of LISP Proxy-ITR mode

Change-Id: I89c9e52ecf0d053a278a78e57c9e589798b4cb7f
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>

VPP-237 Coding standards cleanup

Change-Id: I239143f920285050ad85244ece6893236195534f
Signed-off-by: Dave Barach <dave@barachs.net>

VPP-223 Document vppinfra/bitmap.h

Change-Id: I259a5b716bd8a7abdb0e6bf778432f034338ffdc
Signed-off-by: Dave Barach <dave@barachs.net>

vpp-189 Clean up more coverity warnings

Time to make the donuts

Change-Id: I528937800f7daefce19723dda0216e58d857942c
Signed-off-by: Dave Barach <dave@barachs.net>

VPP-189 Clean up more coverity warnings

Change-Id: I1b971ab326dc334a4743fd7d4184cef106b0523d
Signed-off-by: Dave Barach <dave@barachs.net>

VPP-197: LISP Source/Dest control plane support

Change-Id: I0db53af96b925ec0d975dd77f471804b61351aec
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>

Update coding style for hash_foreach_mem

Change-Id: I2f336331463cedb2703150b003761e5c6e4431e8
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

VPP-237 vpp-api-test coding style cleanup

Change-Id: I50a5412463e9346149a7504344a68c8b5762dc97
Signed-off-by: Dave Barach <dave@barachs.net>

ENIC driver patch for PKT_RX_VLAN_PKT packet flag backward compatibility

The PKT_RX_VLAN_PKT flag will be totally obsolete by 16.11. We still need
this ENIC driver patch for 16.07.

Change-Id: I287035525d2d1b5313e88e9e74b6310536de2c32
Signed-off-by: John Lo <loj@cisco.com>

LISP multihoming API changes and cleanup

Change-Id: I106352a6da0fad2b91dc8593f8d6d664af3113a8
Signed-off-by: Florin Coras <fcoras@cisco.com>

VPP-166 Documentation changes for ip4_forward.c

Change-Id: Ia9f80bea9ca8a94430ed37ececbe4434f9f5ad48
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

VPP-226 - adding UDP TCP to port-range

Change-Id: I5f4261279dcdbb03e182b18d05602407c0e55f89
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

VPP-166 Documentation changes for ip4.h/lookup.h

Change-Id: Ia9f18b0eeba3a7cee35e66dbd15d3efb567acfc6
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

VPP-180 Clean up multi-socket / multi-chunk mempool discovery

Change the default DPDK version to 16.07, and rename the indicated
patch directory. Use the native vhost-user driver.

Change-Id: Ie3d17e90e363ce86f0233b58c152de683b5d9456
Signed-off-by: Dave Barach <dave@barachs.net>

LISP API/VAT cleanup

- cleaned up some of the LISP APIs
- added support for mac in dp APIs

Change-Id: I11d419a30d73ddbf6554768d6dc2a09cc5a6e072
Signed-off-by: Florin Coras <fcoras@cisco.com>

VPP-233: disallow array[0] in reply messages

- updates jvpp generator to raise exception
  if array[0] is present in reply/detail/counter message

- fixes vpe.api reply/detail/counter messages
  that use incorrect variable array syntax.

Additional info:

Variable arrays in reply/detail/counter messages needs to have
lenght defined in other variable within the message.
The other variable can have any name, so it is impossible to
generate Java/Python code handling.

New syntax introduced by
https://gerrit.fd.io/r/#/c/1617/
fixes the problem:

u32 some_var;
XX array[some_var];

Change-Id: I0af50f1ef1d94d95b56d9326d4e944e72b4edcdd
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>

API support for src/dst based routing policy in LISP

Change-Id: I0ae90f884378acabeda310a6431c89f3ec195d0e
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>

VPP-229: fix NPE in JNI array handling

Change-Id: Ieb5182a7a3612e09bd2b28eb6a4abbdb4d29d34b
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>

Fix for broken vagrant installs when using Vagrant 1.8.5.

I upgraded Fedora23 which installed kernel 4.6.4 which in turn required
VirtualBox 5.1.2 which in turn required Vagrant 1.8.5.

Workaround for a change in Vagrant 1.8.5 that breaks Centos. The
newer version of Vagrant doesn't chmod the ssh directory before trying to copy
new public key during installs. This will be fixed upstream in Vagrant 1.8.6.
Bug doesn't affect Ubuntu because it uses a different umask whereas Centos uses
0002.

Change-Id: I8108d4cc208fc47fa69f8a5cf27b2bba7e34293e
Signed-off-by: Thomas F Herbert <therbert@redhat.com>

VPP: Fixed dpdk-16.07 BAD checksum error

     - Updated tarball name and checksum value

Change-Id: If06581285e506859bd1edb516b690e963c7de5d0
Signed-off-by: Sachin <sachin.saxena@nxp.com>

VPP-226 IPv4 src-address + port range checker

Change-Id: Ia251e9d7d53e894a5666109f69e9626d27ea74cb
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

Fix new LISP Coverity warnings

Change-Id: I60ef5218110e596f77d11e3949284a7a7af7dedb
Signed-off-by: Florin Coras <fcoras@cisco.com>

Update CSIT test 160727 -> 160731

- update of CSIT operational branch to be user for VPP-patch test

Change-Id: I4c5200fbf0fcdc2f8fef2913a9b9a5981a6ecec1
Signed-off-by: Jan <jgelety@cisco.com>

Jvpp: add handling for mising unsigned array types

Change-Id: I239082622ceabdd1d0a7b6b6489a2789096a01fc
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>

Initial L2 LISP support

This introduces support for layer 2 overlays with LISP. Similarly to L3,
all tenant packets to be encapsulated are captured by an interface, but
the mapping (layer binding) instead of being between an L3 VRF and a
LISP VNI, it is between and an L2 bridge domain and a VNI. At a high
level, this results in two important properties:
1) the source and destinations of all packets flooded in the
   bridge-domain are mapped via the LISP control plane and the replies are
   converted into data-plane tunnels tracked via a LISP specific
   source/dest L2 FIB
2) All packets reaching the interface and matching a source/dest L2 LISP
   FIB entry are L3 (IP4/6) encapsulated.

This is solely a unicast feature, therefore at this time ARPs are not
handled in any special way.

Change-Id: I0b7badcd7c6d5166db07d4acd2cc4ae7fba3e18e
Signed-off-by: Florin Coras <fcoras@cisco.com>

Addition of u16[] to JVPP generator

Change-Id: I8d746cfae4d64ae200ff0053de23b80ee951c290
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

VPP-189: Fix another batch of coverity warnings

Change-Id: I2b13894cca950ddb6732714f3acc180443552b5f
Signed-off-by: Dave Barach <dave@barachs.net>

Remove per-worker destination frame queue

This frame queue is not part of the dpdk code anymore,
so it can be removed. It will save some space in the
1st cacelineof dpdk device data struct.

Change-Id: If839861961548750601400a511a609be7ae84b30
Signed-off-by: Damjan Marion <damarion@cisco.com>

enic: fix bug introduced with scatter rx

    Author: Nelson Escobar <neescoba@cisco.com>
    Date:   Mon Jun 13 17:24:41 2016 -0700

    We did not properly set the rq pointers we pass up to dpdk when
    rx scatter was introduced.  This resulted in segfaults whenever
    more than one rq was being used.

Change-Id: I77a9793ea9035baa1ada77d3af7bc83baf58d097
Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>

LISP - fix bug in ip_prefix_normalize_ip6

- fix bug
- refactoring code

Change-Id: I2c330f3fbdead567b65c889cfffc2562d99b61db
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>

plugins/vcgn-plugin: Fix vpp hang with pthread spinlock

Currently, pthread spinlock is initialized in macro ASSERT, thus
the spinlock only will be initialized when CLIB_ASSERT_ENABLE is true.
But CLIB_ASSERT_ENABLE depends on CLIB_DEBUG been set.

Mostly, CLIB_DEBUG is zero, so spinlock will never been initialized,
which will lead vpp hang when try to hold the lock.

This patch fix this issue.

Change-Id: If01982b5df849834ccbc705f8e9291f2b6c32d0a
Signed-off-by: Michael Qiu <qiudayu@chinac.com>

plugin/vcgn:Remove local defined ip4_interface_first_address

Function ip4_interface_first_address has been defined in
vnet/ip/ip4.h, and result an compile issue.

  CC       vcgn/cnat_ipv4_icmp_error_outside_input.lo
  CC       vcgn/cnat_logging.lo
vcgn/cnat_logging.c:361:1: error: conflicting types for 'ip4_interface_first_address'
 ip4_interface_first_address (ip4_main_t * im, u32 sw_if_index)
 ^
In file included from /usr/include/vnet/ip/ip.h:57:0,
                 from vcgn/cnat_logging.c:24:
/usr/include/vnet/ip/ip4.h:390:1: note: previous declaration of 'ip4_interface_first_address' was here
 ip4_interface_first_address (ip4_main_t * im, u32 sw_if_index,
 ^
make: *** [vcgn/cnat_logging.lo] Error 1

Change-Id: I1165c9bb778263c195ed34ab438dcb27dfd207bc
Signed-off-by: Michael Qiu <qiudayu@chinac.com>

VPP-142 Follow up fix for shared_count of indirect adjacencies

Clean up dead code path added in previous attempt.

Change-Id: Ib95b07bfd7699496f6808da97200993e2104d796
Signed-off-by: John Lo <loj@cisco.com>

VPP-189 More coverity bug fixes

Change-Id: I6e9290b26b1e74fc5652b689c8d5cc2972ac11d5
Signed-off-by: Dave Barach <dave@barachs.net>

VPP-223 Bounded-index extensible hash documentation

Change-Id: If162252062014dbd8ef44f7f10649d54d9a288b0
Signed-off-by: Dave Barach <dave@barachs.net>

Add IP adjacency registration function

Given that it is possible and easy to add dynamic
IP adjacencies, it might be helpful to have an explicit
call to do so.
This way, additional information such as how to display
the adjacency can be provided at the same time.

Change-Id: I5c735ae45ed763560352f637e3462f2931dc97d9
Signed-off-by: Pierre Pfister <ppfister@cisco.com>

Edit eid table dump

- change output from eid table
- add eid filter:
all - dump all eid
local - dump local eid
remote - dump remote eid

Change-Id: Ifaaad8abf44cf70c4c22d05252e501456f1f1083
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>

LISP - Bug fix, can`t remove static remote mapping

Fix bug, can`t remove static remote mapping,
small update in LISP remote mapping API.

Change-Id: Ide32485a1a0d2cf08829d544500fa2755214b8cc
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>

Edit Lisp locator_set API

Change the output format of lisp locator_set API.
Create new API for lisp locator.
Change lisp_enable_disable_status_dump -> show_lisp_status, not use dump
function.

Change-Id: Ie2024cbf5e55b22ba077266220bf8584d5cac07a
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>

VPE_API small fix for LISP locator_set

- add documentation
- use new feature in vpe_api

Change-Id: I2708383aa886494d948feea1869c3fabae94c7bf
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>

Update CSIT test 160710 -> 160727

Change-Id: Ia6e4e951a409a3b8caef16bb62d9969ae030b667
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>

VPP-210: Clearer error codes in vlib-api for API trace save

Change-Id: Ic02eaaaa8cf7a0f1c75eca8e3b87956d5e9045e7
Signed-off-by: root <calvin.ference@gmail.com>

VPP-189 coverity warning cleanups

Change-Id: Ia4fbf4352119504e022b89d10d44a5259d94f316
Signed-off-by: Dave Barach <dave@barachs.net>

Vhost-User: Fix bind sockaddr length

The sockaddr length argument provided to bind was wrong.
This patch also adds an error message in the CLI when the
vhost-user add function fails.

Change-Id: Ib4466accffe49c8c3f4951ebf3a83a24529f6a5b
Signed-off-by: Pierre Pfister <ppfister@cisco.com>

VAT add_locator_set api support multiple locators

Change-Id: I22df3d4407bd7fdd953783f00605380a2d6fb46e
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>

VPP-214: IPSec cli/api vector ck and ik initialization

Change-Id: I34e19d1feb350c47987b9764b642ef9baa000581
Signed-off-by: Matus Fabian <matfabia@cisco.com>

VPP-223 General documentation updates

Per the TWS session...

- Some simple treatment of the contents of pool.h
- Changing some \brief commands to @brief. (will do a more
  complete pass at this later.)

Change-Id: I050ee69c59c4b572ac295b5f86940b7f4c934cd9
Signed-off-by: Chris Luke <chrisy@flirble.org>

VPP-165 Update directory list in README

Change-Id: I7bc983860d6cc40f264e509e74b92978667324bc
Signed-off-by: Chris Luke <chrisy@flirble.org>

Fix missing include dirs in doxygen

Also allow a developer to alter the directories scanned at runtime to
facilitate shorter run-times when writing documentation.

Change-Id: I2a09519661a3abe1fbc0cfc294000934852af951
Signed-off-by: Chris Luke <chrisy@flirble.org>

policer classify

JIRA: VPP-114

If the classifier finds a matching entry, it sends packet to the policer,
packet should be pre-colored for color-aware policers.

Change-Id: I10cb53b49907137769418f230df2cab577d0f3a0
Signed-off-by: Matus Fabian <matfabia@cisco.com>

Fix coverity warnings

Change-Id: I37131f2d814a608fe9098daff83ff395f7ce99d7
Signed-off-by: Dave Barach <dave@barachs.net>

Fix Coverty warning in lisp_add_del_map_resolver_command_fn

Change-Id: I074d9e026ae42aa14caedc56287816ab64968425
Signed-off-by: Florin Coras <fcoras@cisco.com>

Author: Dave Barach <dave@barachs.net>
--- log message follows this line --
Coverity: fix minor bug in test code

Change-Id: I5921874b4902fc7fe140a9b22852e7d18583e7ae
Signed-off-by: Dave Barach <dave@barachs.net>

VPP-142 - Follow up fix for shared_count in indirect adjacencies

Change-Id: Ia2d0351ffd40c75cbf9611e00a7e111189ad70b5
Signed-off-by: John Lo <loj@cisco.com>

VPP-108: fix buffer overrun

Probably not seen (yet) in practice due to the message ring allocation
scheme.

Change-Id: I7f01b5c09e0a172ad43ec3b8416e2791cada6122
Signed-off-by: Dave Barach <dave@barachs.net>

VPP-189 Fix 137 coverity no-op issues from vpeapigen

vpeapigen is not properly detecting no-op endian swap operations (on u8
or u8[] types) which in turn causes Coverity to currently report ~137
minor issues from the generated vpe.api.h file.

This patch makes vpeapigen comment out those no-op situations thus:

    /* a->interface_name[0..63] = a->interface_name[0..63] (no-op) */
    /* a->admin_up_down = a->admin_up_down (no-op) */

Change-Id: Ifbc5c93e1939206656e0515b528a4d167c539fd2
Signed-off-by: Chris Luke <chrisy@flirble.org>

Add DPDK 16.07 support (rc3 based)

DPDK vhost-user support is disabled due to significan changes
in the DPDK vhost-user code which are not compatible with current
VPP code.

Change-Id: I3f0d28cb75f6370282ec7e33d57cbfb77e1a3ce1
Signed-off-by: Damjan Marion <damarion@cisco.com>

HONEYCOMB-83: Add Gre Feature

PatchSet 3: use clib_memcpy for copy.
PatchSet 2: use clib_memcpy() to copy IP address.
PatchSet 1: Support IPv6 interface for GRE API.

Change-Id: I80ee4b61df15da7fd851b682a97d5d49f89568b7
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>

Add support for Chelsio T540-CR and T580-CR

Change-Id: Ibe927027c2aea6f2d85a9c50bf462c552b63861c
Signed-off-by: Damjan Marion <damarion@cisco.com>

As interface is set to L3 mode, reset its output_node_index for l2-output

As an interface is changed from L2 bridging/xconenct to L3 mode, reset the
output_node_index for l2-output for the interface's sw_if_index. The reset
needs to be done in case the sw_if_index of this interface is freed and
reused for another interface type afterwards. Otherwise, the stale output
node may be used by l2-output for this sw_if_index and result in undesirable
behavior including the possibility of VPP crash.

Change-Id: Idd91d288c7643f0a1975a6787fcc330d03a7fac7
Signed-off-by: John Lo <loj@cisco.com>

Improve interface naming for NICs ports sharing same PCI ID

Change-Id: I68d708f5dd76dc7a46c3c8634aa8f18c515177e5
Signed-off-by: Damjan Marion <damarion@cisco.com>

Updating gitignore for generated plugins folder

Change-Id: I266db9f4667c4f720d6109fad5c4d31eb182ed30
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>

Rename reused LISP interfaces

Change-Id: I0efb4c488ea18504a87c845f8fe399f0333d5be2
Signed-off-by: Florin Coras <fcoras@cisco.com>

Fix CLI for adding LISP fwd entries

Change-Id: Ib707d252e624e3c1c4ac261fd3cef17b097633e5
Signed-off-by: Florin Coras <fcoras@cisco.com>

l2_rw preload starts where data is

Change-Id: I8819f78dedb02abd38ae0c404e9524ebde12191f
Signed-off-by: Pierre Pfister <ppfister@cisco.com>

tapcli: Use error counter for buffer allocation error

Change-Id: Ic51a0d17918de56869cfd4a371054fb380000089
Signed-off-by: Pierre Pfister <ppfister@cisco.com>

build-root/vagrant: Fix SSE4.x for VB

Number of users are reporting issues using VPP with Vagrant and the
VirtualBox provider. VPP quits complaining that SSE support is not enabled.

This change explicity enables SSE4.x support in the VirtualBox VM.

Change-Id: Ia26dc43276aae4179609febfd705d868fa3e07c6
Signed-off-by: Ray <ray.kinsella@intel.com>

Add API calls for packet generator

Added new API to:
- create packet generator interface
- enable packet generator per stream or all
- capture into file

Change-Id: I0e6c1f28069853e4b26f0dc9d282353b0b7f6512
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>