This document describes a high-level design of a system for continuous
performance measuring, trending and change detection for FD.io VPP SW
-data plane. It builds upon the existing FD.io CSIT framework with
-extensions to its throughput testing methodology, CSIT data analytics
-engine (PAL – Presentation-and-Analytics-Layer) and associated Jenkins
-jobs definitions.
+data plane (and other performance tests run within CSIT sub-project).
-Proposed design replaces existing CSIT performance trending jobs and
-tests with new Performance Trending (PT) CSIT module and separate
+There is a Performance Trending (PT) CSIT module, and a separate
Performance Analysis (PA) module ingesting results from PT and
analysing, detecting and reporting any performance anomalies using
-historical trending data and statistical metrics. PA does also produce
-trending dashboard and graphs with summary and drill-down views across
-all specified tests that can be reviewed and inspected regularly by
-FD.io developers and users community.
+historical data and statistical metrics. PA does also produce
+trending dashboard, list of failed tests and graphs with summary and
+drill-down views across all specified tests that can be reviewed and
+inspected regularly by FD.io developers and users community.
Performance Tests
-----------------
-Performance trending is currently relying on the Maximum Receive Rate
-(MRR) tests. MRR tests measure the packet forwarding rate under the
-maximum load offered by traffic generator over a set trial duration,
+Performance trending relies on Maximum Receive Rate (MRR) tests.
+MRR tests measure the packet forwarding rate, in multiple trials of set
+duration, under the maximum load offered by traffic generator
regardless of packet loss. Maximum load for specified Ethernet frame
size is set to the bi-directional link rate.
- For 10GE NICs the maximum packet rate load is 2* 14.88 Mpps for 64B,
a 10GE bi-directional link rate.
- For 40GE NICs the maximum packet rate load is 2* 18.75 Mpps for 64B,
- a 40GE bi-directional link sub-rate limited by TG 40GE NIC used,
- XL710.
+ a 40GE bi-directional link sub-rate limited by the packet forwarding
+ capacity of 2-port 40GE NIC model (XL710) used on T-Rex Traffic
+ Generator.
-- **Trial duration**: 10sec.
-- **Execution frequency**: twice a day, every 12 hrs (02:00, 14:00 UTC).
+- **Trial duration**: 1 sec.
+- **Number of trials per test**: 10.
+- **Test execution frequency**: twice a day, every 12 hrs (02:00,
+ 14:00 UTC).
Note: MRR tests should be reporting bi-directional link rate (or NIC
rate, if lower) if tested VPP configuration can handle the packet rate
--------------
All measured performance trend data is treated as time-series data that
-can be modelled using normal distribution. After trimming the outliers,
-the median and deviations from median are used for detecting performance
-change anomalies following the three-sigma rule of thumb (a.k.a.
-68-95-99.7 rule).
-
-Metrics
-````````````````
-
-Following statistical metrics are used as performance trend indicators
-over the rolling window of last <N> sets of historical measurement data:
-
-- **Q1**, **Q2**, **Q3** : **Quartiles**, three points dividing a ranked
- data set of <N> values into four equal parts, Q2 is the median of the
- data.
-- **IQR** = Q3 - Q1 : **Inter Quartile Range**, measure of variability,
- used here to calculate and eliminate outliers.
-- **Outliers** : extreme values that are at least (1.5 * IQR) below Q1.
-
- - Note: extreme values that are at least (1.5 * IQR) above Q3 are not
- considered outliers, and are likely to be classified as
- progressions.
-
-- **TMA** : **Trimmed Moving Average**, average across the data set of
- <N> values without the outliers. Used here to calculate TMSD.
-- **TMSD** : **Trimmed Moving Standard Deviation**, standard deviation
- over the data set of <N> values without the outliers, requires
- calculating TMA. Used for anomaly detection.
-- **TMM** : **Trimmed Moving Median**, median across the data set of <N>
- values excluding the outliers. Used as a trending value and as a
- reference for anomaly detection.
-
-Outlier Detection
-`````````````````
-
-Outlier evaluation of test result of value <X> follows the definition
-from previous section:
-
-+----------------------------+----------------------+
-| Outlier Evaluation Formula | Evaluation Result |
-+============================+======================+
-| X < (Q1 - 1.5 * IQR) | Outlier |
-+----------------------------+----------------------+
-| X >= (Q1 - 1.5 * IQR) | Valid (For Trending) |
-+----------------------------+----------------------+
+can be modelled as concatenation of groups, each group modelled
+using normal distribution. While sometimes the samples within a group
+are far from being distributed normally, currently we do not have a
+better tractable model.
+
+Here, "sample" should be the result of single trial measurement,
+with group boundaries set only at test run granularity.
+But in order to avoid detecting causes unrelated to VPP performance,
+the default presentation (without /new/ in URL)
+takes average of all trials within the run as the sample.
+Effectively, this acts as a single trial with aggregate duration.
+
+Performance graphs always show the run average (not all trial results).
+
+The group boundaries are selected based on `Minimum Description Length`_.
+
+Minimum Description Length
+--------------------------
+
+`Minimum Description Length`_ (MDL) is a particular formalization
+of `Occam's razor`_ principle.
+
+The general formulation mandates to evaluate a large set of models,
+but for anomaly detection purposes, it is useful to consider
+a smaller set of models, so that scoring and comparing them is easier.
+
+For each candidate model, the data should be compressed losslessly,
+which includes model definitions, encoded model parameters,
+and the raw data encoded based on probabilities computed by the model.
+The model resulting in shortest compressed message is the "the" correct model.
+
+For our model set (groups of normally distributed samples),
+we need to encode group length (which penalizes too many groups),
+group average (more on that later), group stdev and then all the samples.
+
+Luckily, the "all the samples" part turns out to be quite easy to compute.
+If sample values are considered as coordinates in (multi-dimensional)
+Euclidean space, fixing stdev means the point with allowed coordinates
+lays on a sphere. Fixing average intersects the sphere with a (hyper)-plane,
+and Gaussian probability density on the resulting sphere is constant.
+So the only contribution is the "area" of the sphere, which only depends
+on the number of samples and stdev.
+
+A somehow ambiguous part is in choosing which encoding
+is used for group size, average and stdev.
+Different encodings cause different biases to large or small values.
+In our implementation we have chosen probability density
+corresponding to uniform distribution (from zero to maximal sample value)
+for stdev and average of the first group,
+but for averages of subsequent groups we have chosen a distribution
+which disourages delimiting groups with averages close together.
+
+Our implementation assumes that measurement precision is 1.0 pps.
+Thus it is slightly wrong for trial durations other than 1.0 seconds.
+Also, all the calculations assume 1.0 pps is totally negligible,
+compared to stdev value.
+
+The group selection algorithm currently has no parameters,
+all the aforementioned encodings and handling of precision is hardcoded.
+In principle, every group selection is examined, and the one encodable
+with least amount of bits is selected.
+As the bit amount for a selection is just sum of bits for every group,
+finding the best selection takes number of comparisons
+quadratically increasing with the size of data,
+the overall time complexity being probably cubic.
+
+The resulting group distribution looks good
+if samples are distributed normally enough within a group.
+But for obviously different distributions (for example `bimodal distribution`_)
+the groups tend to focus on less relevant factors (such as "outlier" density).
Anomaly Detection
`````````````````
-To verify compliance of test result of valid value <X> against defined
-trend metrics and detect anomalies, three simple evaluation formulas are
-used:
+Once the trend data is divided into groups, each group has its population average.
+The start of the following group is marked as a regression (or progression)
+if the new group's average is lower (higher) then the previous group's.
-+-------------------------------------------+------------------+-------------+
-| Anomaly | Compliance | Evaluation |
-| Evaluation Formula | Confidence Level | Result |
-+===========================================+==================+=============+
-| (TMM - 3 * TMSD) <= X <= (TMM + 3 * TMSD) | 99.73% | Normal |
-+-------------------------------------------+------------------+-------------+
-| X < (TMM - 3 * TMSD) | Anomaly | Regression |
-+-------------------------------------------+------------------+-------------+
-| X > (TMM + 3 * TMSD) | Anomaly | Progression |
-+-------------------------------------------+------------------+-------------+
-
-TMM is used for the central trend reference point instead of TMA as it
-is more robust to anomalies.
+In the text below, "average at time <t>", shorthand "AVG[t]"
+means "the group average of the group the sample at time <t> belongs to".
Trend Compliance
````````````````
Trend compliance metrics are targeted to provide an indication of trend
changes over a short-term (i.e. weekly) and a long-term (i.e.
-quarterly), comparing the last trend value, TMM[last], to one from week
-ago, TMM[last - 1week] and to the maximum of trend values over last
-quarter except last week, max(TMM[(last - 3mths)..(last - 1week)]),
+quarterly), comparing the last group average AVG[last], to the one from week
+ago, AVG[last - 1week] and to the maximum of trend values over last
+quarter except last week, max(AVG[last - 3mths]..ANV[last - 1week]),
respectively. This results in following trend compliance calculations:
-+-------------------+----------------+-----------+------------------------------------------+
-| Trend | | | |
-| Compliance Metric | Change Formula | V(alue) | R(eference) |
-+===================+================+===========+==========================================+
-| Short-Term Change | ((V - R) / R) | TMM[last] | TMM[last - 1week] |
-+-------------------+----------------+-----------+------------------------------------------+
-| Long-Term Change | ((V - R) / R) | TMM[last] | max(TMM[(last - 3mths)..(last - 1week)]) |
-+-------------------+----------------+-----------+------------------------------------------+
++-------------------------+---------------------------------+-----------+-------------------------------------------+
+| Trend Compliance Metric | Trend Change Formula | Value | Reference |
++=========================+=================================+===========+===========================================+
+| Short-Term Change | (Value - Reference) / Reference | AVG[last] | AVG[last - 1week] |
++-------------------------+---------------------------------+-----------+-------------------------------------------+
+| Long-Term Change | (Value - Reference) / Reference | AVG[last] | max(AVG[last - 3mths]..AVG[last - 1week]) |
++-------------------------+---------------------------------+-----------+-------------------------------------------+
Trend Presentation
------------------
Dashboard tables list a summary of per test-case VPP MRR performance
trend and trend compliance metrics and detected number of anomalies.
-Separate tables are generated for tested VPP worker-thread-core
-combinations (1t1c, 2t2c, 4t4c). Test case names are linked to
-respective trending graphs for ease of navigation thru the test data.
+Separate tables are generated for each testbed and each tested number of
+physical cores for VPP workers (1c, 2c, 4c). Test case names are linked to
+respective trending graphs for ease of navigation through the test data.
+
+Failed tests
+````````````
+
+The Failed tests tables list the tests which failed over the specified seven-
+day period together with the number of fails over the period and last failure
+details - Time, VPP-Build-Id and CSIT-Job-Build-Id.
+
+Separate tables are generated for each testbed. Test case names are linked to
+respective trending graphs for ease of navigation through the test data.
Trendline Graphs
````````````````
-Trendline graphs show per test case measured MRR throughput values with
-associated trendlines. The graphs are constructed as follows:
+Trendline graphs show measured per run averages of MRR values,
+group average values, and detected anomalies.
+The graphs are constructed as follows:
-- X-axis represents performance trend job build Id (csit-vpp-perf-mrr-
- daily-master-build).
-- Y-axis represents MRR throughput in Mpps.
+- X-axis represents the date in the format MMDD.
+- Y-axis represents run-average MRR value in Mpps.
- Markers to indicate anomaly classification:
- - Outlier - gray circle around MRR value point.
- Regression - red circle.
- Progression - green circle.
-In addition the graphs show dynamic labels while hovering over graph
-data points, representing (trend job build Id, MRR value) and the actual
-vpp build number (b<XXX>) tested.
+- The line shows average MRR value of each group.
+In addition the graphs show dynamic labels while hovering over graph
+data points, presenting the CSIT build date, measured MRR value, VPP
+reference, trend job build ID and the LF testbed ID.
Jenkins Jobs
------------
1. PT job triggers:
- a) Periodic e.g. daily.
+ a) Periodic e.g. twice a day.
b) On-demand gerrit triggered.
2. Measurements and data calculations per test case:
- a) Max Received Rate (MRR) - send packets at link rate over a trial
- period, count total received packets, divide by trial period.
+ a) Max Received Rate (MRR) - for each trial measurement,
+ send packets at link rate for trial duration,
+ count total received packets, divide by trial duration.
-3. Archive MRR per test case.
+3. Archive MRR values per test case.
4. Archive all counters collected at MRR.
Performance Analysis (PA)
`````````````````````````
-CSIT PA runs performance analysis including trendline calculation, trend
-compliance and anomaly detection using specified trend analysis metrics
-over the rolling window of last <N> sets of historical measurement data.
+CSIT PA runs performance analysis
+including anomaly detection as described above.
PA is defined as follows:
1. PA job triggers:
- a) By PT job at its completion.
+ a) By PT jobs at their completion.
b) On-demand gerrit triggered.
2. Download and parse archived historical data and the new data:
a) Download RF output.xml files from latest PT job and compressed
- archived data.
+ archived data from nexus.
b) Parse out the data filtering test cases listed in PA specification
(part of CSIT PAL specification file).
- c) Evalute new data from latest PT job against the rolling window of
- <N> sets of historical data for trendline calculation, anomaly
- detection and short-term trend compliance. And against long-term
- trendline metrics for long-term trend compliance.
-3. Calculate trend metrics for the rolling window of <N> sets of
- historical data:
+3. Re-calculate new groups and their averages.
- a) Calculate quartiles Q1, Q2, Q3.
- b) Trim outliers using IQR.
- c) Calculate TMA and TMSD.
- d) Calculate normal trending range per test case based on TMM and
- TMSD.
+4. Evaluate new test data:
-4. Evaluate new test data against trend metrics:
-
- a) If within the range of (TMA +/- 3*TMSD) => Result = Pass,
- Reason = Normal. (to be updated base on the final Jenkins code).
- b) If below the range => Result = Fail, Reason = Regression.
- c) If above the range => Result = Pass, Reason = Progression.
+ a) If the existing group is prolonged => Result = Pass,
+ Reason = Normal.
+ b) If a new group is detected with lower average =>
+ Result = Fail, Reason = Regression.
+ c) If a new group is detected with higher average =>
+ Result = Pass, Reason = Progression.
5. Generate and publish results
- a) Relay evaluation result to job result. (to be updated base on the
- final Jenkins code).
- b) Generate a new set of trend summary dashboard and graphs.
+ a) Relay evaluation result to job result.
+ b) Generate a new set of trend summary dashboard, list of failed
+ tests and graphs.
c) Publish trend dashboard and graphs in html format on
https://docs.fd.io/.
+ d) Generate an alerting email. This email is sent by Jenkins to
+ csit-report@lists.fd.io
+
+Testbed HW configuration
+------------------------
+
+The testbed HW configuration is described on
+`this FD.IO wiki page <https://wiki.fd.io/view/CSIT/CSIT_LF_testbed#FD.IO_CSIT_testbed_-_Server_HW_Configuration>`_.
+
+.. _Minimum Description Length: https://en.wikipedia.org/wiki/Minimum_description_length
+.. _Occam's razor: https://en.wikipedia.org/wiki/Occam%27s_razor
+.. _bimodal distribution: https://en.wikipedia.org/wiki/Bimodal_distribution