-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2018 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Test Cases ***
| tc01-64B-1t1c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps.
| | ...
-| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 64B | 1C | NDRDISC
| | ...
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${100000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L3FWD on all DUTs | 1 | 1 | no
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold}
| tc02-64B-1t1c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps, LT=0.5%.
| | ...
-| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH
| | ...
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${100000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L3FWD on all DUTs | 1 | 1 | no
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
| tc03-1518B-1t1c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps.
| | ...
-| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 1518B | 1C | NDRDISC
| | ...
| | ${framesize}= | Set Variable | ${1518}
| | ${min_rate}= | Set Variable | ${10000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L3FWD on all DUTs | 1 | 1 | no
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold}
| tc04-1518B-1t1c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
| | ...
-| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH
| | ...
| | ${framesize}= | Set Variable | ${1518}
| | ${min_rate}= | Set Variable | ${10000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L3FWD on all DUTs | 1 | 1 | no
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
| tc05-9000B-1t1c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 5kpps.
| | ...
-| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 9000B | 1C | NDRDISC
| | ...
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes'
+| | Given Start L3FWD on all DUTs | 1 | 1 | yes
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold}
| tc06-9000B-1t1c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 5kpps, LT=0.5%.
| | ...
-| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH
| | ...
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes'
+| | Given Start L3FWD on all DUTs | 1 | 1 | yes
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
| tc07-64B-2t2c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps.
| | ...
-| | [Tags] | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | 64B | 2C | NDRDISC
| | ...
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${100000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L3FWD on all DUTs | 2 | 1 | no
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold}
| tc08-64B-2t2c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps, LT=0.5%.
| | ...
-| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH
| | ...
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${100000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L3FWD on all DUTs | 2 | 1 | no
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
| tc09-1518B-2t2c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps.
| | ...
-| | [Tags] | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | 1518B | 2C | NDRDISC
| | ...
| | ${framesize}= | Set Variable | ${1518}
| | ${min_rate}= | Set Variable | ${10000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L3FWD on all DUTs | 2 | 1 | no
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold}
| tc10-1518B-2t2c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
| | ...
-| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH
| | ...
| | ${framesize}= | Set Variable | ${1518}
| | ${min_rate}= | Set Variable | ${10000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'no'
+| | Given Start L3FWD on all DUTs | 2 | 1 | no
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
| tc11-9000B-2t2c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 5kpps.
| | ...
-| | [Tags] | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | 9000B | 2C | NDRDISC
| | ...
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes'
+| | Given Start L3FWD on all DUTs | 2 | 1 | yes
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold}
| tc12-9000B-2t2c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\
| | ... | 1 receive queue per NIC port.
| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 5kpps, LT=0.5%.
| | ...
-| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH
| | ...
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes'
+| | Given Start L3FWD on all DUTs | 2 | 1 | yes
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
| tc13-64B-4t4c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\
| | ... | 2 receive queues per NIC port.
| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps.
| | ...
-| | [Tags] | 4T4C | MTHREAD | NDRDISC
+| | [Tags] | 64B | 4C | NDRDISC
| | ...
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${100000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'no'
+| | Given Start L3FWD on all DUTs | 4 | 2 | no
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold}
| tc14-64B-4t4c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\
| | ... | 2 receive queues per NIC port.
| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps, LT=0.5%.
| | ...
-| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH
| | ...
| | ${framesize}= | Set Variable | ${64}
| | ${min_rate}= | Set Variable | ${100000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'no'
+| | Given Start L3FWD on all DUTs | 4 | 2 | no
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
| tc15-1518B-4t4c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\
| | ... | 2 receive queues per NIC port.
| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps.
| | ...
-| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH
| | ...
| | ${framesize}= | Set Variable | ${1518}
| | ${min_rate}= | Set Variable | ${10000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'no'
+| | Given Start L3FWD on all DUTs | 4 | 2 | no
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold}
| tc16-1518B-4t4c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\
| | ... | 2 receive queues per NIC port.
| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
| | ...
-| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH
| | ...
| | ${framesize}= | Set Variable | ${1518}
| | ${min_rate}= | Set Variable | ${10000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'no'
+| | Given Start L3FWD on all DUTs | 4 | 2 | no
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
| tc17-9000B-4t4c-ethip4-ip4base-l3fwd-ndrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\
| | ... | 2 receive queues per NIC port.
| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 5kpps.
| | ...
-| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH
| | ...
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes'
+| | Given Start L3FWD on all DUTs | 4 | 2 | yes
| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold}
| tc18-9000B-4t4c-ethip4-ip4base-l3fwd-pdrdisc
| | [Documentation]
-| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\
| | ... | 2 receive queues per NIC port.
| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 5kpps, LT=0.5%.
| | ...
-| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH
| | ...
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes'
+| | Given Start L3FWD on all DUTs | 4 | 2 | yes
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${threshold} | ${perf_pdr_loss_acceptance}