Benoît Ganne [Wed, 23 Oct 2019 11:53:49 +0000 (13:53 +0200)]
ip: reassembly: fix use-after-free
When processing the last buffer of a reassembled packet, the current
buffer will be freed and must be reloaded using the updated index.
Type: fix
Change-Id: Ib39e29e60eb527b4cd4828a3aa37d82c8dddd709
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Ole Troan [Fri, 25 Oct 2019 16:30:40 +0000 (18:30 +0200)]
vapi: switch to python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I78aac39b697e29bb454e5e95855e79ea3122b4c3
Ole Troan [Fri, 25 Oct 2019 15:03:54 +0000 (17:03 +0200)]
l2: l2bd nd termination test instability
The test for ND event suppression reused the previous test run
ipv6 address, and would sometimes consider that a duplicate,
and therefore suppressing that one too.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1b115aa4eba9d57770fa03fcf38b7a1c251cfe88
Neale Ranns [Tue, 15 Oct 2019 15:47:55 +0000 (15:47 +0000)]
dhcp: fix crash on unicast renewal send
Type: fix
- when the addresses were learnt a copy of the client was sent to the
main thread, this meant the unicast adjacecny was saved on the copy
not on the original.
- Add logging.
- Improve the proxy-node that hands the clint packets so the DHCP
packets are traced.
- allow a renewal to configure new address data
Change-Id: I6ab0afcccbc4a1cdefdd1b8beeda8fc7ba20ec1f
Signed-off-by: Neale Ranns <nranns@cisco.com>
Dave Barach [Thu, 24 Oct 2019 22:10:10 +0000 (18:10 -0400)]
mdata: buffer metadata change tracker plugin
A handy tool in case you need to know which metadata will be changed
when a packet visits a certain node.
Reflect metadata changes into format functions used by the
vpp-specific wireshark dissector.
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I96fe8a24db4082bb29fe2a33cc522e8616a3a1bb
Benoît Ganne [Wed, 23 Oct 2019 13:47:22 +0000 (15:47 +0200)]
gso: fix buffers trace
When segmenting, new buffers must inherit the original buffer trace
handle.
Type: fix
Change-Id: Ibd1859a501b2862906dfc563b98652cfee5681da
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Steven Luong [Wed, 23 Oct 2019 04:27:22 +0000 (21:27 -0700)]
lacp: add actor steady state check prior to skip processing lacp pdu
In a rare event, we may be skipping processing lacp pdu's when the it is
not in steady state.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I3595d22dbff8a97dce9fb4d4452d2051bcf6f523
Steven Luong [Wed, 23 Oct 2019 20:28:37 +0000 (13:28 -0700)]
devices: vhoost cpu->copy array overflow on tcp jumbo frame (65535 bytes)
We reserve 40 slots in cpu->copy array prior to copy out to avoid overflowing
the array. However, 40 is not enough for the jumbo frame because desceiptor
buffer len is likely at 1536. Change the reserve to 200 and add ASSERT to avoid
encountering the same problem in the future.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ibf0c03c4b4f33e781d5be8679ccd6c3a4b4a646d
Changqian Wang [Fri, 18 Oct 2019 09:13:13 +0000 (17:13 +0800)]
memif: memif buffer leaks during disconnecting zero copy interface.
code added to free the zero copy interface rx/tx queue buffers during disconnecting.
As
ddc9eb4 find the last official solution introduced core in ut. This does not.
Type: fix
Signed-off-by: Changqian Wang <changqwa@cisco.com>
Change-Id: I971ee164e6d4331a85feb9e65d6702d771c86985
Ole Troan [Wed, 23 Oct 2019 09:24:23 +0000 (11:24 +0200)]
cdp: re-enable skipped tests for python3
CDP uses the running sytems host name, which
caused different failures on different systems.
The root cause was an python3 specific error in
checksum calculation.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I205436682d46e7e8cbb8c057c03a76dbbcab4d72
Jakub Grajciar [Mon, 2 Sep 2019 11:28:52 +0000 (13:28 +0200)]
avf: improve timeout handling
Type: feature
Change-Id: I8fa1d691ef7bc51ae5c44c344195207ce7d0a2e7
Signed-off-by: Damjan Marion <damarion@cisco.com>
Ignas Bačius [Thu, 3 Oct 2019 14:15:38 +0000 (17:15 +0300)]
sr: add "set sr encaps hop-limit" command
Default hop-limit for the encapsulating IPv6 header is a compile-time
constant. Add ability to specify custom hop-limit, in order to avoid
packets being dropped with "hop limit exceeded in transit" response in
certain network configurations.
Type: feature
Signed-off-by: Ignas Bačius <ignas@noia.network>
Change-Id: I77f2b35c987cfd31801dc2744d31fb3c1984158f
Miklos Tirpak [Tue, 22 Oct 2019 09:01:42 +0000 (11:01 +0200)]
gtpu: msg id fix in send_gtpu_tunnel_details api
Type: fix
_vl_msg_id must start at msg_id_base.
Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com>
Change-Id: Id3f05683c873fcac47667a9736e45e85849b740c
Ole Troan [Tue, 22 Oct 2019 12:01:53 +0000 (14:01 +0200)]
papi: fix default handling
The BaseTypers object were reused, so a default for anyother mesage
would be inherited in new messages.
Type: fix
Fixes:
85465588b18fef9c4712f864f512e00741e2d4f2
Change-Id: Ie1efb85a76b088653eb9ea4b88540c98b6b0aad0
Signed-off-by: Ole Troan <ot@cisco.com>
Florin Coras [Sun, 13 Oct 2019 01:10:20 +0000 (18:10 -0700)]
tcp: improve rate samples for retansmitted segments
Type: fix
- Initialize max_seq on both transmitted and retransmitted segments
- Keep track of segments that have been sacked.
- Track new data segments sent during recovery
Change-Id: Ice55231a3da200ae6171702e54b2ce155f831143
Signed-off-by: Florin Coras <fcoras@cisco.com>
Florin Coras [Wed, 23 Oct 2019 02:44:45 +0000 (19:44 -0700)]
tcp: fix sack retransmit beyond snd_nxt
Type: fix
Ensure that sack retransmit logic does not try to inadvertently send new
data.
Change-Id: Idfda19643577d9c1b58e2af8d8283cabfbaf98e6
Signed-off-by: Florin Coras <fcoras@cisco.com>
Benoît Ganne [Tue, 22 Oct 2019 14:55:19 +0000 (16:55 +0200)]
rdma: build: fix ibverb compilation test
Type: fix
Change-Id: Ib6389ecbcf4a1b7bae25b2bd9e7fbdec49545aaa
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Benoît Ganne [Tue, 22 Oct 2019 16:19:00 +0000 (18:19 +0200)]
vppinfra: make coverity happy with vec_set_len
Coverity gets confused by ASSERT((l) <= vec_max_len(v)) when l is 0.
Type: fix
Change-Id: I247d7015b148233d8f195bcf41e9a047b7a21309
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Dave Wallace [Mon, 21 Oct 2019 22:45:23 +0000 (22:45 +0000)]
tests: quic add big stream extended tests
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I6c5bdfd934a2c96c410c36c2bc090ee47b679bea
haiyanx1.zhang [Sat, 12 Oct 2019 08:44:44 +0000 (08:44 +0000)]
tests: test tls case
Type: feature
Signed-off-by: haiyanx1.zhang <haiyanx1.zhang@intel.com>
Change-Id: I071f5face0d489dc967cce1edcffbc1f8fac5c7e
Signed-off-by: haiyanx1.zhang <haiyanx1.zhang@intel.com>
Florin Coras [Wed, 25 Sep 2019 23:37:43 +0000 (16:37 -0700)]
vcl: handle segment map errors
Type: fix
Change-Id: Ibd122a4565c067627c4bbc8cac7df2d5b6497392
Signed-off-by: Florin Coras <fcoras@cisco.com>
Florin Coras [Mon, 21 Oct 2019 02:55:56 +0000 (19:55 -0700)]
vcl: add config option for preferred tls engine
Type: feature
Change-Id: If6c095c9b737cb524a9232dcfa9be0f93f04d114
Signed-off-by: Florin Coras <fcoras@cisco.com>
Dave Wallace [Mon, 21 Oct 2019 03:28:17 +0000 (03:28 +0000)]
tests: enable vpp_echo to run in gdb
- Enable vpp_echo to be run in gdb when
running 'make test DEBUG=gdb-all'
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I79a69b0573c01900535078d7493d52b417350815
Dave Wallace [Mon, 21 Oct 2019 02:53:14 +0000 (02:53 +0000)]
tests: DEBUG=gdb[server]-all to debug worker(s)
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I0264451632c1ce780b38a2c15a7e34350fc6d521
Benoît Ganne [Mon, 29 Apr 2019 15:27:24 +0000 (17:27 +0200)]
vppinfra: add clib_mem_free_s
IPsec zero-es all allocated key memory including memory sur-allocated by
the allocator.
Move it to its own function in clib mem infra to make it easier to
instrument.
Type: refactor
Change-Id: Icd1c44d18b741e723864abce75ac93e2eff74b61
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Filip Tehlar [Fri, 18 Oct 2019 17:51:06 +0000 (17:51 +0000)]
ikev2: fix GCM cipher
Type: fix
Change-Id: I382499061ff4b1c2cc1b70ebbf9725ff0e1be325
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Klement Sekera [Tue, 22 Oct 2019 12:16:07 +0000 (12:16 +0000)]
ip: reassembly: avoid corruption in vnet buffer
Avoid corrupt next_index in vnet_buffer by moving input and output
variables into different memory places instead of sharing a common
space.
Type: fix
Fixes:
de34c35fc73226943538149fae9dbc5cfbdc6e75
Change-Id: I34471fc6d0c8487535fac21349e688f398934f6d
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Neale Ranns [Tue, 22 Oct 2019 12:32:49 +0000 (12:32 +0000)]
gbp: missing contract hash-mode setting
Type: fix
Change-Id: Ia0f1e88b43e861d3f6965076c73cc48fb9574da3
Signed-off-by: Neale Ranns <nranns@cisco.com>
Filip Tehlar [Fri, 18 Oct 2019 22:24:41 +0000 (22:24 +0000)]
ipsec: fix tunnel protection removal
Type: fix
Change-Id: I4d5546d1f9b3a162291997f6f0c094c5c3d6cf31
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Jakub Grajciar [Thu, 10 Oct 2019 12:21:22 +0000 (14:21 +0200)]
ip: ipfix-export API update
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I5b03e5de111c3a3b8da4e9f02cba0aa99e3ee9f3
Ole Troan [Tue, 22 Oct 2019 06:57:31 +0000 (08:57 +0200)]
cdp: disable failing tests for python3
scapy in python3 does not seem to allow creating invalid protocol
packets. Suggest the maintainer rewrite the invalid tests so they
also work for python3. In the mean time they are disabled.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I554d57528422c98c6df4ba76eeae38c03f512a38
Benoît Ganne [Tue, 11 Jun 2019 14:56:41 +0000 (16:56 +0200)]
build: add missing ldflags to exe and shared
Type: fix
Change-Id: I859bc6ebc574ab09fd70b45f8c911769d00e7acf
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Benoît Ganne [Mon, 22 Jul 2019 12:21:46 +0000 (14:21 +0200)]
vppinfra: add vec_set_len()
l2-flood and bier nodes reset vector length without updating it to its
effective size. Introduce a helper to do it (this allows ASAN to keep
track of the new vector size).
Type: refactor
Change-Id: I2d652550c440f0553a2b49c3ee3d37b49ebc16c3
Signed-off-by: Benoît Ganne <bganne@cisco.com>
snaramre [Fri, 11 Oct 2019 19:04:19 +0000 (19:04 +0000)]
tests: python3 changes for dns tests
Type: fix
Change-Id: Ia81c60d469b29606d9988d7d9ed1e133e6af7158
Signed-off-by: snaramre <snaramre@cisco.com>
Ole Troan [Mon, 21 Oct 2019 21:13:46 +0000 (23:13 +0200)]
flowprobe: tests support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I7425147e864467e4f94cee2a82ef74a894339471
Yu Ping [Mon, 21 Oct 2019 15:23:44 +0000 (23:23 +0800)]
tls: enable tls engine as the default engine
OpenSSL TLS is well maintained and many issues are fixed, and it makes
OpenSSL as the default engine will be more friendly to users if app does
not configure a specific engine such as http_static
Type: fix
Change-Id: I37499af1edd40ffb53b00436044d1fce3b43348d
Signed-off-by: Yu Ping <ping.yu@intel.com>
Ole Troan [Mon, 21 Oct 2019 19:03:39 +0000 (21:03 +0200)]
geneve: tests support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I0ff4d58c181b2bdf483b8b039ad005c2a4915aa8
Ole Troan [Mon, 21 Oct 2019 18:41:44 +0000 (20:41 +0200)]
bonding: tests support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I6cedb43af4437fdabce75f4a845629c5c2f96f6a
Ole Troan [Mon, 21 Oct 2019 19:06:52 +0000 (21:06 +0200)]
ip: test support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9c66bce900f78e5fbd435515df94e327ad25c3c6
Ole Troan [Mon, 21 Oct 2019 18:37:30 +0000 (20:37 +0200)]
l2: tests support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id17bcb65d7eb27f865fc7872b3e485c09f1d29a7
Ole Troan [Mon, 21 Oct 2019 18:39:45 +0000 (20:39 +0200)]
acl: l2 classify test support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3b2e57e3dcf04ae50724b5909272b083d6003a85
Ole Troan [Mon, 21 Oct 2019 18:55:13 +0000 (20:55 +0200)]
ipsec: tests support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id13da9371c71c10c12a0120ec89ba21c1ca47524
Ole Troan [Mon, 21 Oct 2019 17:52:06 +0000 (19:52 +0200)]
classify: tests to support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I8af6ee6e5239f0836978baa063a18a01c610279f
Ole Troan [Mon, 21 Oct 2019 16:59:11 +0000 (18:59 +0200)]
bier: tests support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3cf5295f1a85579a66ba38ca1f74678b45474959
Mathias Raoul [Tue, 6 Aug 2019 12:58:01 +0000 (14:58 +0200)]
quic: Add PICOTLS_INCLUDE_DIR var to CMakeLists.
Type: fix
Change-Id: I10ebcc653491d11ca798e0a60be6eeef82c41766
Signed-off-by: Mathias Raoul <mathias.raoul@gmail.com>
Andrew Yourtchenko [Mon, 21 Oct 2019 12:55:48 +0000 (12:55 +0000)]
tests: add PID of VPP under test to API dump filename for the test
Some testclasses (e.g. IPSec) have methods with the same names,
this causes a race when running in parallel to save the API and
move it into the test's directory - the name of the file has
only the test method name as a discriminator.
Saving two traces from two VPP instances "succeeds", in that
it silently overwrites the file. But only one mv operation
works - the other gives an error "file not found" and fails the test.
Solution: add the PID of VPP under test to the API dump filename,
this way the filenames become guaranteed unique and the race is avoided.
Change-Id: I1bb47ed73369fea0f1bfbf907588a51e2cabfb7f
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Ole Troan [Fri, 18 Oct 2019 13:22:56 +0000 (15:22 +0200)]
ip: reassembly tests python3 support
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I990d8d521c128e8d4f482e30b3a49cbc11b632d1
Florin Coras [Mon, 21 Oct 2019 02:32:47 +0000 (19:32 -0700)]
session: support registration of custom crypto engines
Type: feature
Change-Id: I888d415ff645b3827df7d4cfb0d3c5f4ac940617
Signed-off-by: Florin Coras <fcoras@cisco.com>
Florin Coras [Thu, 17 Oct 2019 16:56:27 +0000 (09:56 -0700)]
vcl: add api to set lcl ip
Type: feature
Change-Id: I40169fbbe8a20670dd612c341b6c78b5c925bf74
Signed-off-by: Florin Coras <fcoras@cisco.com>
Ole Troan [Fri, 18 Oct 2019 12:33:54 +0000 (14:33 +0200)]
dhcp: python3 support in tests
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ie136c1e94e5c25f9547fc2d6d45ce8e1630a035c
Yulong Pei [Thu, 17 Oct 2019 10:41:52 +0000 (18:41 +0800)]
vlib: linux: fix wrong iommu_group value issue when using dpdk-plugin
When VPP work with dpdk-plugin, linux_vfio_main_t->container_fd is always -1
since it never have chance to run open("/dev/vfio/vfio") to get the fd.
But this lead to a potential issue of VPP, that is, when start VPP without
uio-driver field setup in /etc/vpp/startup.conf, VPP will run to automatical
select uio driver in vlib_pci_bind_to_uio() and the function depend on
iommu_group value to decide to work on vfio or vfio-noiommu mode.
Since in vlib_pci_get_device_info() have the condition container_fd != -1,
so the iommu_group value will be always -1 at this scenario, this caused
that VPP mistake to run with vfio-noiommu driver on intel_iommu=on state.
Actually in order to get iommu_group and iommu_group/name value, no need to
depend on linux_vfio_main_t->container_fd value, so the fix remove the
condition lvm->container_fd != -1, then it can get the correct iommu_group
value.
Type: fix
Change-Id: I3f162fc4971b9a2b8717205f8f3b52e30c5e5b69
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Dave Barach [Fri, 18 Oct 2019 18:44:05 +0000 (14:44 -0400)]
vlib: enable worker-thread dispatch pcap trace
Needed a bit of foreach_vlib_main(...) action to turn on/off all
instances of vm->dispatch_pcap_enable, and to pick up the pcap_main_t
pointer from vlib_global_main.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I49b69b87934c7dc7a9835cd07aa2c5c4d3c79f18
Dave Barach [Fri, 18 Oct 2019 15:31:20 +0000 (11:31 -0400)]
mactime: fix handle_get_mactime fcn prototype
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9576ade941b10d1605f6c6714f312ae2a8ad5065
Ole Troan [Fri, 18 Oct 2019 13:57:56 +0000 (15:57 +0200)]
ip: add python3 support to punt tests
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ib918d11fb3278a25a92006dcfe3c7c484e7b33ea
Ole Troan [Fri, 18 Oct 2019 13:41:43 +0000 (15:41 +0200)]
map: python3 support in tests
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Icbe9ca3dc738c6575fe382740a1cc9d29a4a74ff
Ole Troan [Fri, 18 Oct 2019 13:26:25 +0000 (15:26 +0200)]
gso: python3 support in tests
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I166019cc69fd01cb43f1a3fad699f3d2e5ec5b19
Ole Troan [Fri, 18 Oct 2019 12:54:30 +0000 (14:54 +0200)]
ip: ip vrf tests python3 support
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ie23c9d2d7325be62ef33df2f0562ab41518f7bf4
Ole Troan [Fri, 18 Oct 2019 12:40:54 +0000 (14:40 +0200)]
udp:: support python3 in tests
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Iea19d7bc2dfe9736ddefb4419509ccfda7a67eeb
Ole Troan [Fri, 18 Oct 2019 01:39:26 +0000 (03:39 +0200)]
memif: add python3 support to test
Committed from SK936 seat 1A.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I717fafbdb9b8576508d6dd72a7e5653cecebfae0
Signed-off-by: Ole Troan <ot@cisco.com>
Paul Vinciguerra [Fri, 18 Oct 2019 01:08:17 +0000 (21:08 -0400)]
ip: trivial typos in docs
Type: style
Change-Id: I620f15b96ee5401e0145a139f06d343d7c4fadb4
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Ole Troan [Thu, 17 Oct 2019 19:40:36 +0000 (21:40 +0200)]
ipsec: make tests support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3255702e7c562c8d04a91a095e245756c6443a9e
snaramre [Wed, 16 Oct 2019 22:15:43 +0000 (22:15 +0000)]
tests: python3 changes for span and aclplugin test
Type: fix
Change-Id: Ia9f74f951f831cc5c9b5af863db1bb3f7a1a81ff
Signed-off-by: snaramre <snaramre@cisco.com>
Florin Coras [Thu, 17 Oct 2019 05:35:18 +0000 (22:35 -0700)]
session: unify buffer tx dispatching
Type: refactor
Use pending tx buffer vector to postpone dispatching of all buffers,
i.e., either generated as a result of tx events or custom tx event.
Change-Id: Ic5894c4653c338cfb04555d20857f954b245ee83
Signed-off-by: Florin Coras <fcoras@cisco.com>
Dave Barach [Thu, 17 Oct 2019 19:53:08 +0000 (15:53 -0400)]
http_static: pass http request type to builtin handlers
Makes it easy to tell GETs from POSTs, etc., in case one wants to
register the same handler for multiple request types.
Return interface stats as a json array, makes .js code a lot simpler.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Iadae7b909cf3e8ea179fe93620737fdf68f888ac
Ole Troan [Thu, 17 Oct 2019 18:44:25 +0000 (20:44 +0200)]
classify: make tests support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I7c4a12165fa0928fb2b8d99fc1c8d5de16377e7e
Florin Coras [Thu, 17 Oct 2019 05:06:08 +0000 (22:06 -0700)]
session tcp: infra for transports to send buffers
Type: feature
Add infra that allows transpors to enqueue pending buffers without the
need to build and manage their own pending frames. An important benefit
is the fact that buffer wire/tx ordering is ensured by session layer.
Change-Id: I764fd1693d610b321a1d0c84b648a314f14583db
Signed-off-by: Florin Coras <fcoras@cisco.com>
snaramre [Thu, 17 Oct 2019 16:39:03 +0000 (16:39 +0000)]
tests: python3 fixes for reassembly tests
Type: fix
Change-Id: I0d9b823bd558c48b18af9b0d1e80c30729e64dac
Signed-off-by: snaramre <snaramre@cisco.com>
Florin Coras [Thu, 17 Oct 2019 02:28:17 +0000 (19:28 -0700)]
tcp: avoid sending acks when data available
Type: fix
Change-Id: I02e2cb2d349f9ddb2bfed040a08ca448f379d565
Signed-off-by: Florin Coras <fcoras@cisco.com>
snaramre [Wed, 16 Oct 2019 22:36:47 +0000 (22:36 +0000)]
tests: python3 changes for load balancer test
Type: fix
Change-Id: Id9a328158e7c4106a95928bf8ddceb7b9e73aa25
Signed-off-by: snaramre <snaramre@cisco.com>
Ole Troan [Wed, 16 Oct 2019 23:31:12 +0000 (01:31 +0200)]
nat: tests support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ie15ea8f01846f87cb65e90e8762dc941441fc176
Ole Troan [Wed, 16 Oct 2019 23:53:47 +0000 (01:53 +0200)]
vppinfra: test support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id1794f38fcb776ded9b769141f5f47d7be75f247
Sergey Ivanushkin [Thu, 17 Oct 2019 09:16:27 +0000 (10:16 +0100)]
tcp: Init cwnd from ssthresh.
Set high ssthresh out of the box and make configurable
Type: fix
Signed-off-by: Sergey Ivanushkin <sergey.ivanushkin@enea.com>
Change-Id: Iba1549b4ee55e51468ad0b28ef3d26a85fa9cae0
Dave Barach [Tue, 15 Oct 2019 18:52:53 +0000 (14:52 -0400)]
http_static: add "http static cache clear" CLI
Useful to force content reloads
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ieecb018bec61a1624574660842d7d92cd84520f9
Jakub Grajciar [Wed, 9 Oct 2019 12:15:56 +0000 (14:15 +0200)]
ip: punt API cleanup
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I7048f8ec598a8b06d75bdfb5d2fab9f6337c9474
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Jakub Grajciar [Thu, 10 Oct 2019 11:33:43 +0000 (13:33 +0200)]
ip: rd_cp API cleanup
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I1cc42b57fbf72e2ced8b5d1283c34de2f7ff948a
Neale Ranns [Wed, 16 Oct 2019 15:15:23 +0000 (08:15 -0700)]
misc: Update gitignore for /test/ext/.d
.. otherwise i'm going to commit it accidentally
Type: feature
Change-Id: I0378b9a29a28ea7317bc7d234f8cbacdafd6b762
Signed-off-by: Neale Ranns <nranns@cisco.com>
Benoît Ganne [Wed, 16 Oct 2019 13:03:06 +0000 (15:03 +0200)]
bonding: fix interface deletion
Copy sw_if_index value instead of using pointers to original
bif->slaves content which could be overriden by eg. vec_del1().
Type: feature
Change-Id: I37e458effd6b2367479574f7bd3facd4e93bada4
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Florin Coras [Wed, 16 Oct 2019 19:26:51 +0000 (12:26 -0700)]
tcp: fix mss flag in option parsing
Type: fix
Change-Id: Ib03151a097caf15e4e8285afea83d1b930a874b0
Signed-off-by: Florin Coras <fcoras@cisco.com>
Florin Coras [Wed, 16 Oct 2019 18:21:41 +0000 (11:21 -0700)]
session: increase max ctrl msg size
Type: fix
Connect ctrl message recently outgrew the maximum ctrl msg size, so
increase the limit. Also add static asserts for messages that could
potentially exceed the limit.
Change-Id: I0d3e32e0d4d67d7e222cff14ddba59a0c3fb8b00
Signed-off-by: Florin Coras <fcoras@cisco.com>
Florin Coras [Wed, 16 Oct 2019 17:07:39 +0000 (10:07 -0700)]
tcp: avoid head retransmit if scoreboard has no holes
Type: fix
Change-Id: I6164ad0d97cd91b60c85302eff691836d12a0a70
Signed-off-by: Florin Coras <fcoras@cisco.com>
Steven Luong [Thu, 10 Oct 2019 18:36:41 +0000 (11:36 -0700)]
bonding: graph node running after bond-input in feature arc may crash
In bond RX quad loop, when all packets within the frame have the same incoming
interface, we cannot skip calling bond_update_next because that function calls
vnet_feature_next() to update the b->current_config_index. The next node needs
the correct b->current_config_index to work with.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I3d8b3d4e0f95490f406fae7638f0c43c301ce664
Benoît Ganne [Wed, 16 Oct 2019 12:54:24 +0000 (14:54 +0200)]
cdp: fix non-null terminated vector use
Type: fix
Change-Id: I31e5d9d9e93339eb789aed20996f326b085c22a9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Matthew Smith [Fri, 12 Jul 2019 16:55:26 +0000 (11:55 -0500)]
dpdk: add function to add/del extra MAC addrs
Type: feature
Add a callback to install or remove an additional MAC address on
a DPDK-managed device. Note that some PMDs don't have support for
this so YMMV.
Change-Id: I7b0cb3fb0af0d66fbdb7b894a712897f889520a5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Benoît Ganne [Tue, 15 Oct 2019 08:51:11 +0000 (10:51 +0200)]
rdma: add rdma API
Type: feature
Change-Id: I590612989cb3c114f8d99227ad36c3434e998597
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Chenmin Sun [Tue, 15 Oct 2019 12:36:16 +0000 (20:36 +0800)]
flow: Add 'drop' and 'redirect-to-queue' actions support
Type: feature
Add 'drop' and 'redirect-to-queue' support in
'test-flow' command and DPDK plugin
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I567bb77cb401c9bd1309ecabe802fe9de88c746b
snaramre [Fri, 11 Oct 2019 21:28:56 +0000 (21:28 +0000)]
tests: python3 changes for ip6 fib tests
Type: fix
Change-Id: Ie7764fec13cbb83b6899c7c33b7b2f8cc5d40c8a
Signed-off-by: snaramre <snaramre@cisco.com>
Ryujiro Shibuya [Wed, 16 Oct 2019 05:30:02 +0000 (06:30 +0100)]
svm: immediate fifo growth even when wrapped
Type: fix
- when the fifo is wrapped, and if applicable, insert a new chunk after
the tail-chunk and rebuild the rb_tree.
- make sure that this new algorithm can be applied only when the fifo is
used by a single thread (master-thread of the fifo).
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: I3fc187bc496ea537ca24381e4abc08d2906c9e03
Benoît Ganne [Wed, 16 Oct 2019 12:58:51 +0000 (14:58 +0200)]
svm: reset vector data instead of length
Reseting vector length confuses ASAN and does not reset data either.
Only reset data instead.
Type: fix
Change-Id: Id60b8333df28a5b636a9d302b987bbad95c85c38
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Benoît Ganne [Wed, 16 Oct 2019 13:08:37 +0000 (15:08 +0200)]
fib: fix use-after-free for interface adj removal
Type: fix
Change-Id: I82308e368d14d84f5970dad229bdcf2de7d1839d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Benoît Ganne [Wed, 16 Oct 2019 13:11:22 +0000 (15:11 +0200)]
session: fix use-after-free
Type: fix
Change-Id: Ie63b80db56febc8a16bafcdd5399b2f92b6aa437
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Ole Troan [Tue, 15 Oct 2019 17:31:55 +0000 (19:31 +0200)]
tests: cli wrapper should return string
Python3 fixes.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I648b2142d45dfab9146a02eeb1b12de11103ff9f
Signed-off-by: Ole Troan <ot@cisco.com>
snaramre [Thu, 29 Aug 2019 18:00:26 +0000 (18:00 +0000)]
tests: python3 version check for enum module
Type: fix
Change-Id: Ie210500fba741d3f047e8499957b5b233a78fa36
Signed-off-by: snaramre <snaramre@cisco.com>
Ignas Bacius [Thu, 10 Oct 2019 13:14:47 +0000 (16:14 +0300)]
ipip: fix typos in short_help
Type: fix
Signed-off-by: Ignas Bacius <ignas@noia.network>
Change-Id: Ica069e8c9dd4efd1f00639754da471bf11418b57
Mohsin Kazmi [Wed, 10 Jul 2019 16:45:55 +0000 (18:45 +0200)]
gbp: Add extended SFC unit tests
Type: feature
Change-Id: I1218257af0053ae27c4394d7666fde87a732e08c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Mohsin Kazmi [Tue, 8 Oct 2019 17:42:38 +0000 (19:42 +0200)]
gso: Add gso feature arc
Type: refactor
Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Mohsin Kazmi [Wed, 9 Oct 2019 16:35:16 +0000 (18:35 +0200)]
ping: Move to plugin
Type: refactor
Change-Id: I51d5bf54dfd408aa0c406cbdf0f4be10ef19d10d
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Andrew Yourtchenko [Mon, 14 Oct 2019 10:55:31 +0000 (10:55 +0000)]
memif: Revert "memif buffer leaks during disconnect."
This reverts commit
d570c4d18df404cb59ef72d20d56f8e31418c8e9.
That commit introduced crash into memif make test-debug.
To reproduce: "TEST=memif make test-debug".
With this commit reverted the make test-debug for memif passes.
Type: fix
Change-Id: Ic335359e2050bb8a5d530b01c595b081476fa197
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Neale Ranns [Mon, 14 Oct 2019 15:52:43 +0000 (08:52 -0700)]
fib: recursive calculation leads to delegate pool realloc
Type: fix
Change-Id: Ib7ac53d1b59b641ccd3b1d733107d7f1ba174314
Signed-off-by: Neale Ranns <nranns@cisco.com>
Dave Barach [Mon, 14 Oct 2019 15:26:15 +0000 (11:26 -0400)]
mactime: add the "mactime.json" builtin URL
If the http static server plugin is enabled, register the name
"mactime.json" with the server. Visiting <web-root>/mactime.json
produces a json brain-dump of the mactime table.
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ie39b0c776675864a85251b8c07fbf719d399f6de
Andrew Yourtchenko [Sun, 13 Oct 2019 10:09:50 +0000 (10:09 +0000)]
tests: make pg_start() wait until pg completes
A sizable number of tests call pg_start() to get the packets flowing and then
immediately expect to have the entirety of the packets gone through.
This works on powerful and unstressed hardware, but fails in beautifully random
ways under load.
This also necessitates the complicated logic of remembering the "zombie captures",
then sleeping for some time before cleaning them up....
The solution is simple: in pg_start(), start the generators, wait till they
all finish, clean up, done.
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I930e51b7aae39c9841d22dd905a4d13a465a672b
Type: test