jjb/global-macros.yaml

   1 # Copyright (c) 2021 Cisco and/or its affiliates.
   2 # Licensed under the Apache License, Version 2.0 (the "License");
   3 # you may not use this file except in compliance with the License.
   4 # You may obtain a copy of the License at:
   5 #
   6 #     http://www.apache.org/licenses/LICENSE-2.0
   7 #
   8 # Unless required by applicable law or agreed to in writing, software
   9 # distributed under the License is distributed on an "AS IS" BASIS,
  10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  11 # See the License for the specific language governing permissions and
  12 # limitations under the License.
  13
  14 ---
  15 # Global macros.
  16
  17 #### PARAMETERS
  18 # Keep 'parameter' entries ordered alphabetically, please.
  19 - parameter:
  20     name: arch-parameter
  21     parameters:
  22       - string:
  23           name: ARCH
  24           default: '{arch}'
  25           description: "Architecture parameter"
  26
  27 - parameter:
  28     name: archive-artifacts-parameter
  29     parameters:
  30       - string:
  31           name: ARCHIVE_ARTIFACTS
  32           default: '{artifacts}'
  33           description: "Artifacts to archive on the log server."
  34
  35 - parameter:
  36     name: compiler-parameter
  37     parameters:
  38       - string:
  39           name: CC
  40           default: '{cc}'
  41           description: "CC parameter, can be gnu or clang"
  42
  43 - parameter:
  44     name: make-parallel-jobs-parameter
  45     parameters:
  46       - string:
  47           name: MAKE_PARALLEL_JOBS
  48           default: '{make-parallel-jobs}'
  49           description: "The number of cores to use for builds."
  50
  51 - parameter:
  52     name: make-test-os-parameter
  53     parameters:
  54       - string:
  55           name: MAKE_TEST_OS
  56           default: '{make-test-os}'
  57           description: "The OS on which 'make test' is run."
  58
  59 - parameter:
  60     name: csit-fail-on-crc-mismatch-parameter
  61     parameters:
  62       - string:
  63           name: FDIO_CSIT_FAIL_ON_CRC_MISMATCH
  64           default: '{fail-on-crc-mismatch}'
  65           description: "If true, CRC is checked, else compatibility is tested."
  66
  67 - parameter:
  68     name: csit-perf-trial-duration-parameter
  69     parameters:
  70       - string:
  71           name: CSIT_PERF_TRIAL_DURATION
  72           default: "{csit-perf-trial-duration}"
  73           description: "Duration of a trial measurement in BMRR tests."
  74
  75 - parameter:
  76     name: csit-perf-trial-multiplicity-parameter
  77     parameters:
  78       - string:
  79           name: CSIT_PERF_TRIAL_MULTIPLICITY
  80           default: "{csit-perf-trial-multiplicity}"
  81           description: "Number of subsamples for BMRR tests."
  82
  83 - parameter:
  84     name: gerrit-csit-refspec-parameter
  85     parameters:
  86       - string:
  87           name: CSIT_REF
  88           default: ''
  89           # yamllint disable-line rule:line-length
  90           description: "GERRIT_REFSPEC parameter to override separately cloned CSIT repository, leave empty for autodetection / no override."
  91
  92 - parameter:
  93     name: gerrit-event-comment-text-parameter
  94     parameters:
  95       - string:
  96           name: GERRIT_EVENT_COMMENT_TEXT
  97           default: ''
  98           # yamllint disable-line rule:line-length
  99           description: "GERRIT_EVENT_COMMENT_TEXT parameter not given by trigger"
 100
 101 - parameter:
 102     name: gerrit-event-type-parameter
 103     parameters:
 104       - string:
 105           name: GERRIT_EVENT_TYPE
 106           default: ''
 107           description: "GERRIT_EVENT_TYPE parameter not given by trigger"
 108
 109 - parameter:
 110     name: gerrit-parameter
 111     parameters:
 112       - string:
 113           name: GERRIT_BRANCH
 114           default: '{branch}'
 115           description: "JJB configured GERRIT_BRANCH parameter"
 116
 117 - parameter:
 118     name: gerrit-project-parameter
 119     parameters:
 120       - string:
 121           name: GERRIT_PROJECT
 122           default: '{project}'
 123           description: "GERRIT_PROJECT parameter if not given by trigger"
 124
 125 - parameter:
 126     name: gerrit-refspec-parameter
 127     parameters:
 128       - string:
 129           name: GERRIT_REFSPEC
 130           default: '{refspec}'
 131           description: "GERRIT_REFSPEC parameter not given by trigger"
 132
 133 - parameter:
 134     name: is-csit-vpp-job-parameter
 135     parameters:
 136       - string:
 137           name: IS_CSIT_VPP_JOB
 138           default: '{is-csit-vpp-job}'
 139           description: "Parameter is True if this is a CSIT vpp job."
 140
 141 - parameter:
 142     name: maven-exec
 143     parameters:
 144       - string:
 145           name: MVN
 146           # yamllint disable-line rule:line-length
 147           default: '/w/tools/hudson.tasks.Maven_MavenInstallation/{maven-version}/bin/mvn'
 148           description: 'Maven selector to be used by shell scripts'
 149
 150 - parameter:
 151     name: maven-project-parameter
 152     parameters:
 153       - string:
 154           name: MAVEN_SELECTOR
 155           default: '{maven}'
 156           description: 'Maven selector to be used by shell scripts'
 157
 158 - parameter:
 159     name: mode-parameter
 160     parameters:
 161       - string:
 162           name: MODE
 163           default: '{mode}'
 164           description: "mode parameter to be used in shell scripts."
 165
 166 - parameter:
 167     name: os-parameter
 168     parameters:
 169       - string:
 170           name: OS
 171           default: '{os}'
 172           description: "OS parameter"
 173
 174 - parameter:
 175     name: project-parameter
 176     parameters:
 177       - string:
 178           name: PROJECT
 179           default: '{project}'
 180           # yamllint disable-line rule:line-length
 181           description: "JJB configured PROJECT parameter to identify a Gerrit project"
 182
 183 - parameter:
 184     name: repo-name-parameter
 185     parameters:
 186       - string:
 187           name: REPO_NAME
 188           default: '{repo-name}'
 189           description: 'Name of repo to which to publish packaging'
 190
 191 - parameter:
 192     name: stream-parameter
 193     parameters:
 194       - string:
 195           name: STREAM
 196           default: '{stream}'
 197           description: "Stream job parameter to be used in shell scripts."
 198
 199 - parameter:
 200     name: topo-parameter
 201     parameters:
 202       - string:
 203           name: TOPO
 204           default: '{topo}'
 205           description: "Topology parameter"
 206 # [end] Keep 'parameter' entries ordered alphabetically, please.
 207
 208 #### SCMS
 209 # Keep 'scm' entries ordered alphabetically, please.
 210 - scm:
 211     name: gerrit-trigger-scm
 212     scm:
 213       - git:
 214           credentials-id: '{credentials-id}'
 215           url: '$GIT_BASE'
 216           refspec: '{refspec}'
 217           branches:
 218             - 'origin/$GERRIT_BRANCH'
 219           skip-tag: true
 220           choosing-strategy: '{choosing-strategy}'
 221
 222 - scm:
 223     name: gerrit-trigger-scm-recursive
 224     scm:
 225       - git:
 226           credentials-id: '{credentials-id}'
 227           url: '$GIT_BASE'
 228           refspec: '{refspec}'
 229           branches:
 230             - 'origin/$GERRIT_BRANCH'
 231           skip-tag: true
 232           choosing-strategy: '{choosing-strategy}'
 233           submodule:
 234             recursive: '{submodule-recursive}'
 235
 236 - scm:
 237     name: git-scm
 238     scm:
 239       - git:
 240           credentials-id: '{credentials-id}'
 241           url: '$GIT_BASE'
 242           refspec: ''
 243           branches:
 244             - 'origin/{branch}'
 245           skip-tag: true
 246           wipe-workspace: true
 247 # [end] Keep 'scm' entries ordered alphabetically, please.
 248
 249 #### WRAPPERS
 250 # Keep 'wrapper' entries ordered alphabetically, please.
 251 - wrapper:
 252     name: build-timeout
 253     wrappers:
 254       - timeout:
 255           type: absolute
 256           timeout: 360
 257           fail: true
 258
 259 - wrapper:
 260     # This wrapper is required for all jobs as it configures the wrappers
 261     # needed by the fd.io infra.
 262     name: fdio-infra-wrappers
 263     wrappers:
 264       - timeout:
 265           type: absolute
 266           timeout: '{build-timeout}'
 267           timeout-var: 'BUILD_TIMEOUT'
 268           fail: true
 269       - timestamps
 270       - ssh-agent-credentials:
 271           users:
 272             - 'jenkins-gerrit-credentials'
 273       - jclouds:
 274           single-use: true
 275       - openstack:
 276           single-use: true
 277
 278 - wrapper:
 279     # This wrapper is used for all jobs that require no-activity timeouts
 280     name: fdio-infra-wrappers-non-activity-timeout
 281     wrappers:
 282       - timeout:
 283           type: no-activity
 284           timeout: '{build-timeout}'
 285           fail: true
 286       - timestamps
 287       - ssh-agent-credentials:
 288           users:
 289             - 'jenkins-gerrit-credentials'
 290       - jclouds:
 291           single-use: true
 292       - openstack:
 293           single-use: true
 294 # [end] Keep 'wrapper' entries ordered alphabetically, please.
 295
 296 #### TRIGGERS
 297 # Keep 'trigger' entries ordered alphabetically, please.
 298 - trigger:
 299     name: gerrit-trigger-checkstyle
 300     # Comes from VPP, some verify jobs wait for checkstyle to pass.
 301     # This macro is to be used for such verify jobs which are voting.
 302     triggers:
 303       - gerrit:
 304           server-name: 'Primary'
 305           trigger-on:
 306             - comment-added-contains-event:
 307                 comment-contains-value: 'checkstyle_success'
 308           projects:
 309             - project-compare-type: 'ANT'
 310               project-pattern: '{name}'
 311               branches:
 312                 - branch-compare-type: 'ANT'
 313                   branch-pattern: '**/{branch}'
 314
 315 - trigger:
 316     name: gerrit-trigger-checkstyle-nonvoting
 317     # Comes from VPP, some verify jobs wait for checkstyle to pass.
 318     # This macro is to be used for such verify jobs which are non-voting.
 319     triggers:
 320       - gerrit:
 321           server-name: 'Primary'
 322           trigger-on:
 323             - comment-added-contains-event:
 324                 comment-contains-value: 'checkstyle_success'
 325           projects:
 326             - project-compare-type: 'ANT'
 327               project-pattern: '{name}'
 328               branches:
 329                 - branch-compare-type: 'ANT'
 330                   branch-pattern: '**/{branch}'
 331           skip-vote:
 332             successful: true
 333             failed: true
 334             unstable: true
 335             notbuilt: true
 336           override-votes: true
 337           gerrit-build-successful-verified-value: 1
 338           gerrit-build-failed-verified-value: 1
 339           gerrit-build-unstable-verified-value: 1
 340           gerrit-build-notbuilt-verified-value: 1
 341
 342 - trigger:
 343     name: gerrit-trigger-csit-perftest
 344     # Manual trigger common for csit-vpp and vpp-csit perf jobs.
 345     triggers:
 346       - gerrit:
 347           server-name: 'Primary'
 348           trigger-on:
 349             - comment-added-contains-event:
 350                 comment-contains-value: '{trigger-word}'
 351           projects:
 352             - project-compare-type: 'ANT'
 353               project-pattern: '{project}'
 354               branches:
 355                 - branch-compare-type: 'ANT'
 356                   branch-pattern: '**/{branch}'
 357           skip-vote:
 358             successful: '{skip-vote}'
 359             failed: '{skip-vote}'
 360             unstable: '{skip-vote}'
 361             notbuilt: '{skip-vote}'
 362
 363 - trigger:
 364     name: gerrit-trigger-csit-vpp-devicetest-full
 365     # Comes from CSIT, for automatic jobs running device tests with VPP builds.
 366     # The job acts as an automatic verify job for CSIT contributions.
 367     triggers:
 368       - gerrit:
 369           server-name: 'Primary'
 370           trigger-on:
 371             # The main way the job is triggered automatically on patch upload.
 372             # Gated by tox job, so we do not spend resources on WiP changes.
 373             - comment-added-contains-event:
 374                 comment-contains-value: 'tox_success'
 375             # Manual trigger to allow testing WiP changes with selected tags.
 376             - comment-added-contains-event:
 377                 comment-contains-value: 'csit-devicetest'
 378             # A comment with "recheck" restarts tox job, so no condition here.
 379           projects:
 380             - project-compare-type: 'ANT'
 381               project-pattern: '{project}'
 382               branches:
 383                 - branch-compare-type: 'ANT'
 384                   branch-pattern: '**/{branch}'
 385           skip-vote:
 386             successful: '{skip-vote}'
 387             failed: '{skip-vote}'
 388             unstable: '{skip-vote}'
 389             notbuilt: '{skip-vote}'
 390
 391 - trigger:
 392     name: gerrit-trigger-csit-vpp-devicetest-manual
 393     # Comes from CSIT, for manual jobs running "device" tests with VPP builds.
 394     # The job acts as a manual (optional) verify job for CSIT contributions.
 395     triggers:
 396       - gerrit:
 397           server-name: 'Primary'
 398           trigger-on:
 399             - comment-added-contains-event:
 400                 comment-contains-value: 'csit-devicetest'
 401           projects:
 402             - project-compare-type: 'ANT'
 403               project-pattern: '{project}'
 404               branches:
 405                 - branch-compare-type: 'ANT'
 406                   branch-pattern: '**/{branch}'
 407           skip-vote:
 408             successful: '{skip-vote}'
 409             failed: '{skip-vote}'
 410             unstable: '{skip-vote}'
 411             notbuilt: '{skip-vote}'
 412
 413 - trigger:
 414     name: gerrit-trigger-manually-triggered
 415     triggers:
 416       - gerrit:
 417           server-name: 'Primary'
 418           trigger-on:
 419             - comment-added-contains-event:
 420                 comment-contains-value: '{comment-trigger-value}'
 421           projects:
 422             - project-compare-type: 'ANT'
 423               project-pattern: '{name}'
 424               branches:
 425                 - branch-compare-type: 'ANT'
 426                   branch-pattern: '**/{branch}'
 427
 428 - trigger:
 429     name: gerrit-trigger-patch-merged
 430     triggers:
 431       - gerrit:
 432           server-name: 'Primary'
 433           trigger-on:
 434             - change-merged-event
 435             - comment-added-contains-event:
 436                 comment-contains-value: 'remerge'
 437           projects:
 438             - project-compare-type: 'ANT'
 439               project-pattern: '{name}'
 440               branches:
 441                 - branch-compare-type: 'ANT'
 442                   branch-pattern: '**/{branch}'
 443           # Force Jenkins always vote the values it should already have voted
 444           # during the prior verify phase
 445           override-votes: true
 446           gerrit-build-started-verified-value: 1
 447           gerrit-build-successful-verified-value: 1
 448           gerrit-build-failed-verified-value: 1
 449           gerrit-build-unstable-verified-value: 1
 450           gerrit-build-notbuilt-verified-value: 1
 451           gerrit-build-started-codereview-value: 0
 452           gerrit-build-successful-codereview-value: 0
 453           gerrit-build-failed-codereview-value: 0
 454           gerrit-build-unstable-codereview-value: 0
 455           gerrit-build-notbuilt-codereview-value: 0
 456
 457 - trigger:
 458     name: gerrit-trigger-patch-submitted
 459     triggers:
 460       - gerrit:
 461           server-name: 'Primary'
 462           trigger-on:
 463             - patchset-created-event:
 464                 exclude-drafts: 'true'
 465                 exclude-trivial-rebase: 'false'
 466                 exclude-no-code-change: 'false'
 467             - draft-published-event
 468             - comment-added-contains-event:
 469                 comment-contains-value: 'recheck'
 470             - comment-added-contains-event:
 471                 comment-contains-value: 'reverify'
 472           projects:
 473             - project-compare-type: 'ANT'
 474               project-pattern: '{name}'
 475               branches:
 476                 - branch-compare-type: 'ANT'
 477                   branch-pattern: '**/{branch}'
 478
 479 - trigger:
 480     name: gerrit-trigger-os-patch-merged
 481     triggers:
 482       - gerrit:
 483           server-name: 'Primary'
 484           trigger-on:
 485             - comment-added-contains-event:
 486                 comment-contains-value: 'os-merge'
 487           projects:
 488             - project-compare-type: 'ANT'
 489               project-pattern: '{name}'
 490               branches:
 491                 - branch-compare-type: 'ANT'
 492                   branch-pattern: '**/{branch}'
 493           # Force Jenkins always vote the values it should already have voted
 494           # during the prior verify phase
 495           override-votes: true
 496           gerrit-build-started-verified-value: 1
 497           gerrit-build-successful-verified-value: 1
 498           gerrit-build-failed-verified-value: 1
 499           gerrit-build-unstable-verified-value: 1
 500           gerrit-build-notbuilt-verified-value: 1
 501           gerrit-build-started-codereview-value: 0
 502           gerrit-build-successful-codereview-value: 0
 503           gerrit-build-failed-codereview-value: 0
 504           gerrit-build-unstable-codereview-value: 0
 505           gerrit-build-notbuilt-codereview-value: 0
 506
 507 - trigger:
 508     name: gerrit-trigger-os-trivial-patch-submitted
 509     triggers:
 510       - gerrit:
 511           server-name: 'Primary'
 512           trigger-on:
 513             - comment-added-contains-event:
 514                 comment-contains-value: 'os-check'
 515             - comment-added-contains-event:
 516                 comment-contains-value: 'os-verify'
 517           projects:
 518             - project-compare-type: 'ANT'
 519               project-pattern: '{name}'
 520               branches:
 521                 - branch-compare-type: 'ANT'
 522                   branch-pattern: '**/{branch}'
 523
 524 - trigger:
 525     name: gerrit-trigger-trivial-patch-submitted
 526     triggers:
 527       - gerrit:
 528           server-name: 'Primary'
 529           trigger-on:
 530             - patchset-created-event:
 531                 exclude-drafts: 'true'
 532                 exclude-trivial-rebase: 'false'
 533                 exclude-no-code-change: 'true'
 534             - draft-published-event
 535             - comment-added-contains-event:
 536                 comment-contains-value: 'recheck'
 537             - comment-added-contains-event:
 538                 comment-contains-value: 'reverify'
 539           projects:
 540             - project-compare-type: 'ANT'
 541               project-pattern: '{name}'
 542               branches:
 543                 - branch-compare-type: 'ANT'
 544                   branch-pattern: '**/{branch}'
 545
 546 - trigger:
 547     name: gerrit-trigger-trivial-patch-submitted-skip-vote
 548     triggers:
 549       - gerrit:
 550           server-name: 'Primary'
 551           trigger-on:
 552             - patchset-created-event:
 553                 exclude-drafts: 'true'
 554                 exclude-trivial-rebase: 'false'
 555                 exclude-no-code-change: 'true'
 556             - draft-published-event
 557             - comment-added-contains-event:
 558                 comment-contains-value: 'recheck'
 559             - comment-added-contains-event:
 560                 comment-contains-value: 'reverify'
 561           projects:
 562             - project-compare-type: 'ANT'
 563               project-pattern: '{name}'
 564               branches:
 565                 - branch-compare-type: 'ANT'
 566                   branch-pattern: '**/{branch}'
 567           skip-vote:
 568             successful: true
 569             failed: true
 570             unstable: true
 571             notbuilt: true
 572
 573 - trigger:
 574     name: gerrit-trigger-vpp-csit-devicetest-full
 575     # Comes from VPP, for automated jobs running "device" tests with CSIT code.
 576     # The job acts as an automatic verify job for VPP contributions.
 577     triggers:
 578       - gerrit:
 579           server-name: 'Primary'
 580           trigger-on:
 581             - comment-added-contains-event:
 582                 comment-contains-value: 'checkstyle_success'
 583             - comment-added-contains-event:
 584                 comment-contains-value: 'devicetest'
 585           projects:
 586             - project-compare-type: 'ANT'
 587               project-pattern: '{name}'
 588               branches:
 589                 - branch-compare-type: 'ANT'
 590                   branch-pattern: '**/{branch}'
 591           skip-vote:
 592             successful: '{skip-vote}'
 593             failed: '{skip-vote}'
 594             unstable: '{skip-vote}'
 595             notbuilt: '{skip-vote}'
 596
 597 - trigger:
 598     name: gerrit-trigger-vpp-csit-devicetest-manual
 599     # Comes from VPP, for manual jobs running "device" tests with CSIT code.
 600     # The job acts as a manual (optional) verify job for VPP contributions.
 601     triggers:
 602       - gerrit:
 603           server-name: 'Primary'
 604           trigger-on:
 605             - comment-added-contains-event:
 606                 comment-contains-value: 'devicetest'
 607           projects:
 608             - project-compare-type: 'ANT'
 609               project-pattern: '{name}'
 610               branches:
 611                 - branch-compare-type: 'ANT'
 612                   branch-pattern: '**/{branch}'
 613           skip-vote:
 614             successful: '{skip-vote}'
 615             failed: '{skip-vote}'
 616             unstable: '{skip-vote}'
 617             notbuilt: '{skip-vote}'
 618 # [end] Keep 'trigger' entries ordered alphabetically, please.
 619
 620 #### PUBLISHERS
 621 # Keep 'publisher' entries ordered alphabetically, please.
 622 - publisher:
 623     name: archive-artifacts
 624     publishers:
 625       - archive:
 626           artifacts: '{artifacts}'
 627           allow-empty: true
 628           fingerprint: true
 629           latest-only: true
 630
 631 - publisher:
 632     name: email-notification
 633     publishers:
 634       - email-ext:
 635           recipients: 'nobody@projectrotterdam.info'
 636           reply-to: ''
 637           content-type: default
 638           # yamllint disable-line rule:line-length
 639           subject: '{email-prefix} $PROJECT_NAME - Build # $BUILD_NUMBER - $BUILD_STATUS!'
 640           body: |
 641               $PROJECT_NAME - Build # $BUILD_NUMBER - $BUILD_STATUS:
 642
 643               Check console output at $BUILD_URL to view the results.
 644           unstable: true
 645           fixed: true
 646           send-to:
 647             - developers
 648             - recipients
 649
 650 - publisher:
 651     name: fdio-infra-publish
 652     # macro to finish up a build.
 653     #
 654     # Handles the following:
 655     #   - Shipping logs to Nexus or S3 logs repository
 656     #   - Cleanup workspace
 657     publishers:
 658       - postbuildscript:
 659           builders:
 660             - role: BOTH
 661               build-on:
 662                 - ABORTED
 663                 - FAILURE
 664                 - NOT_BUILT
 665                 - SUCCESS
 666                 - UNSTABLE
 667               build-steps:
 668                 - shell: !include-raw: scripts/post_build_executor_info.sh
 669                 - shell: !include-raw: scripts/post_build_deploy_archives.sh
 670                 - fdio-infra-ship-backup-logs
 671                 - fdio-infra-ship-logs
 672           mark-unstable-if-failed: true
 673       - workspace-cleanup:
 674           exclude:
 675             # Do not clean up *.jenkins-trigger files for jobs that use a
 676             # properties file as input for triggering another build.
 677             - "**/*.jenkins-trigger"
 678           fail-build: false
 679
 680 - publisher:
 681     name: jacoco-report
 682     publishers:
 683       - jacoco:
 684           exec-pattern: '**/**.exec'
 685           class-pattern: '**/classes'
 686           source-pattern: '**/src/main/java'
 687           # yamllint disable-line rule:line-length
 688           exclusion-pattern: '**/gen**,**/generated-sources/**,**/yang-gen**,**/pax/**'
 689           status-update: true
 690           targets:
 691             - branch:
 692               healthy: 10
 693               unhealthy: 20
 694             - method:
 695               healthy: 50
 696               unhealthy: 40
 697
 698 - publisher:
 699     name: retry-build-on-builder-error
 700     publishers:
 701       - naginator:
 702           max-failed-builds: 1
 703
 704 - publisher:
 705     name: robot-report
 706     publishers:
 707       - robot:
 708           output-path: '{output-path}'
 709           other-files: ''
 710 # [end] Keep 'publisher' entries ordered alphabetically, please.
 711
 712 #### BUILDERS
 713 # Keep 'builder' entries ordered alphabetically, please.
 714 - builder:
 715     name: ci-management-check-unicode
 716     builders:
 717       - shell: |
 718           $WORKSPACE/scripts/check-unicode.sh jjb/
 719
 720 - property:
 721     name: fdio-infra-properties
 722     properties:
 723       - build-discarder:
 724           days-to-keep: '{build-days-to-keep}'
 725           num-to-keep: '{build-num-to-keep}'
 726
 727 - builder:
 728     name: fdio-infra-ship-backup-logs
 729     builders:
 730       - config-file-provider:
 731           files:
 732             - file-id: "jenkins-s3-log-ship"
 733               variable: $HOME/.aws/credentials
 734       - shell: !include-raw:
 735           - scripts/logs_publish.sh
 736       - shell: !include-raw:
 737           - ../global-jjb/shell/logs-clear-credentials.sh
 738
 739 - builder:
 740     name: fdio-infra-ship-logs
 741     builders:
 742       # Ensure no pre-existing .netrc files are overriding logs config
 743       - lf-provide-maven-settings-cleanup
 744       - config-file-provider:
 745           files:
 746             - file-id: "jenkins-log-archives-settings"
 747               variable: "SETTINGS_FILE"
 748       - conditional-step:
 749           condition-kind: regex-match
 750           regex: "^.*logs-s3.*"
 751           label: $S3_BUCKET
 752           on-evaluation-failure: dont-run
 753           steps:
 754             - config-file-provider:
 755                 files:
 756                   - file-id: "jenkins-s3-log-ship"
 757                     target: $HOME/.aws/credentials
 758       - lf-infra-create-netrc:
 759           server-id: logs
 760       - shell: !include-raw:
 761           - ../global-jjb/shell/logs-deploy.sh
 762       - shell: !include-raw:
 763           - ../global-jjb/shell/logs-clear-credentials.sh
 764       - description-setter:
 765           regexp: "(^Nexus build logs: .*)"
 766
 767 - builder:
 768     name: packer-validate
 769     builders:
 770       - config-file-provider:
 771           files:
 772             - file-id: 'packer-cloud-env'
 773               variable: 'CLOUDENV'
 774       # yamllint disable rule:line-length
 775       - shell: |
 776           #!/bin/bash
 777           cd packer
 778           varfiles="../packer/vars/*"
 779           templates="../packer/templates/*"
 780           provision="../packer/provision/*.sh"
 781           for v in $varfiles; do
 782               [[ "${v##*/}" =~ ^(cloud-env.*)$ ]] && continue
 783               for t in $templates; do
 784                   export PACKER_LOG="yes" && \
 785                   export PACKER_LOG_PATH="packer-validate-${v##*/}-${t##*/}.log" && \
 786                               packer.io validate -var-file=$CLOUDENV \
 787                               -var-file=$v $t
 788                   if [ $? -ne 0 ]; then
 789                      break
 790                   fi
 791               done
 792           done
 793           for p in $provision; do
 794               /bin/bash -n $p > provision-validate-${p##*/}.log 2>&1
 795               if [ $? -ne 0 ]; then
 796                  break
 797               fi
 798           done
 799       # yamllint enable
 800
 801 - builder:
 802     name: packer-build
 803     builders:
 804       - config-file-provider:
 805           files:
 806             - file-id: 'packer-cloud-env'
 807               variable: 'CLOUDENV'
 808       - shell: |
 809           #!/bin/bash
 810           cd packer
 811           export PACKER_LOG="yes" && \
 812           export PACKER_LOG_PATH="packer-build.log" && \
 813                       packer.io build -var-file=$CLOUDENV \
 814                       -var-file=../packer/vars/{platform}.json \
 815                       ../packer/templates/{template}.json
 816
 817 - builder:
 818     name: provide-maven-settings
 819     builders:
 820       - config-file-provider:
 821           files:
 822             - file-id: '{global-settings-file}'
 823               variable: 'GLOBAL_SETTINGS_FILE'
 824             - file-id: '{settings-file}'
 825               variable: 'SETTINGS_FILE'
 826 # [end] Keep 'builder' entries ordered alphabetically, please.