4 All CSIT test cases are labelled with Robot Framework tags used to allow for
5 easy test case type identification, test case grouping and selection for
6 execution. Following sections list currently used CSIT tags and their
12 .. topic:: 2_NODE_DOUBLE_LINK_TOPO
14 2 nodes connected in a circular topology with two links interconnecting
17 .. topic:: 2_NODE_SINGLE_LINK_TOPO
19 2 nodes connected in a circular topology with at least one link
20 interconnecting devices.
22 .. topic:: 3_NODE_DOUBLE_LINK_TOPO
24 3 nodes connected in a circular topology with two links interconnecting
27 .. topic:: 3_NODE_SINGLE_LINK_TOPO
29 3 nodes connected in a circular topology with at least one link
30 interconnecting devices.
37 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch)
38 and csit-vpp-verify jobs (i.e. CSIT patch).
40 .. topic:: SKIP_VPP_PATCH
42 Test case(s) marked to not run in case of vpp-csit-verify (i.e. VPP patch).
49 DUTs and TGs are running on bare metal.
53 DUTs and TGs are running in virtual environment.
57 DUTs with VPP and capable of running Virtual Machine.
62 .. topic:: NIC_Intel-X520-DA2
66 .. topic:: NIC_Intel-XL710
70 .. topic:: NIC_Intel-X710
74 .. topic:: NIC_Intel-XXV710
78 .. topic:: NIC_Cisco-VIC-1227
82 .. topic:: NIC_Cisco-VIC-1385
91 2x10,000 entries in single fib table
95 2x100,000 entries in single fib table
99 2x1,000,000 entries in single fib table
103 Test with 1 L2 bridge domain.
107 Test with 10 L2 bridge domains.
111 Test with 100 L2 bridge domains.
115 Test with 1000 L2 bridge domains.
119 Test with 1 VLAN sub-interface.
123 Test with 10 VLAN sub-interfaces.
127 Test with 100 VLAN sub-interfaces.
131 Test with 1000 VLAN sub-interfaces.
135 Test with 1 VXLAN tunnel.
139 Test with 10 VXLAN tunnels.
143 Test with 100 VXLAN tunnels.
147 Test with 1000 VXLAN tunnels.
151 IPSec in tunnel mode - 1000 tunnels.
153 .. topic:: SRC_USER_10
155 Traffic flow with 10 unique IPs (users) in one direction.
157 .. topic:: SRC_USER_100
159 Traffic flow with 100 unique IPs (users) in one direction.
161 .. topic:: SRC_USER_1000
163 Traffic flow with 1000 unique IPs (users) in one direction.
165 .. topic:: SRC_USER_2000
167 Traffic flow with 2000 unique IPs (users) in one direction.
169 .. topic:: SRC_USER_4000
171 Traffic flow with 4000 unique IPs (users) in one direction.
175 Traffic stream with 100 unique flows (10 IPs/users x 10 UDP ports) in one
180 Traffic stream with 10 000 unique flows (10 IPs/users x 1000 UDP ports) in
183 .. topic:: 100k_FLOWS
185 Traffic stream with 100 000 unique flows (100 IPs/users x 1000 UDP ports) in
193 All functional test cases.
197 All performance test cases.
199 Performance Type Tags
200 ---------------------
204 Single test finding both No Drop Rate and Partial Drop Rate simultaneously.
205 The search is done by optimized algorithm which performs
206 multiple trial runs at different durations and transmit rates.
207 The results come from the final trials, which have duration of 30 seconds.
211 Performance tests where TG sends the traffic at maximum rate (line rate)
212 and reports total sent/received packets over trial duration.
213 The result is an average of 10 trials of 1 second duration.
215 Ethernet Frame Size Tags
216 ------------------------
220 64B frames used for test.
224 78B frames used for test.
228 114B frames used for test.
232 IMIX frame sequence (28x 64B, 16x 570B, 4x 1518B) used for test.
236 1460B frames used for test.
240 1480B frames used for test.
244 1514B frames used for test.
248 1518B frames used for test.
252 9000B frames used for test.
259 Baseline test cases, no encapsulation, no feature(s) configured in tests.
263 IPv4 baseline test cases, no encapsulation, no feature(s) configured in
268 IPv6 baseline test cases, no encapsulation, no feature(s) configured in
273 L2XC baseline test cases, no encapsulation, no feature(s) configured in
278 L2BD baseline test cases, no encapsulation, no feature(s) configured in
283 L2PATCH baseline test cases, no encapsulation, no feature(s) configured in
292 Test cases where encapsulation is used. Use also encapsulation tag(s).
296 At least one feature is configured in test cases. Use also feature tag(s).
300 Functional test cases for TLDK.
304 Functional test cases for DMM.
312 Performance tests which measure connections per second using http requests.
316 Performance tests which measure requests per second using http requests.
320 Tests which use HTTP.
322 .. topic:: NF_DENSITY
324 Performance tests that measure throughput of multiple VNF and CNF
325 service topologies at different service densities.
327 NF Service Density Tags
328 -----------------------
332 NF service density tests with VNF or CNF service chain topology(ies).
336 NF service density tests with CNF service pipeline topology(ies).
338 .. topic:: NF_L3FWDIP4
340 NF service density tests with DPDK l3fwd IPv4 routing as NF workload.
344 NF service density tests with VPP IPv4 routing as NF workload.
348 Service density matrix locator {r}R{c}C, {r}Row denoting number of
349 service instances, {c}Column denoting number of NFs per service
350 instance. {r}=(1,2,4,6,8,10), {c}=(1,2,4,6,8,10).
355 .. topic:: L2BDMACSTAT
357 VPP L2 bridge-domain, L2 MAC static.
359 .. topic:: L2BDMACLRN
361 VPP L2 bridge-domain, L2 MAC learning.
365 VPP L2 point-to-point cross-connect.
369 VPP IPv4 routed forwarding.
373 VPP IPv6 routed forwarding.
386 .. topic:: MPLSUNRLAY
399 IPv4 overlay (IPv4 payload).
403 IPv6 overlay (IPv6 payload).
410 All test cases with dot1q.
414 All test cases with dot1ad.
421 All test cases with base Ethernet (no encapsulation).
425 All test cases with LISP.
429 All test cases with LISP-GPE.
433 All test cases with Vxlan.
437 All test cases with VXLAN-GPE.
441 All test cases with GRE.
445 All test cases with IPSEC.
449 All test cases with Segment routing over IPv6 dataplane.
456 All test cases which use physical interface(s).
460 All test cases which uses VHOST.
464 All test cases which uses VHOST with qemu queue size set to 256.
466 .. topic:: VHOST_1024
468 All test cases which uses VHOST with qemu queue size set to 1024.
472 All test cases which uses VM with optimised scheduler policy.
476 All test cases which uses TUN and TAP.
480 All test cases which uses AFPKT.
484 All test cases which uses Netmap.
488 All test cases which uses Memif.
490 .. topic:: SINGLE_MEMIF
492 All test cases which uses only single Memif connection per DUT. One DUT
493 instance is running in container having one physical interface exposed to
498 All test cases which uses link bonding (BondEthernet interface).
500 .. topic:: LBOND_DPDK
502 All test cases which uses DPDK link bonding.
506 All test cases which uses VPP link bonding.
508 .. topic:: LBOND_MODE_XOR
510 All test cases which uses link bonding with mode XOR.
512 .. topic:: LBOND_MODE_LACP
514 All test cases which uses link bonding with mode LACP.
516 .. topic:: LBOND_LB_L34
518 All test cases which uses link bonding with load-balance mode l34.
522 All test cases which uses one link for link bonding.
526 All test cases which uses two links for link bonding.
530 All test cases which uses Intel Adaptive Virtual Function (AVF) device
531 plugin for VPP. This plugins provides native device support for Intel AVF.
532 AVF is driver specification for current and future Intel Virtual Function
533 devices. In essence, today this driver can be used only with Intel
534 XL710 / X710 / XXV710 adapters.
549 NAT44 configured and tested.
553 NAT44 configured and tested.
557 ACL plugin configured and tested.
561 ACL plugin configured and tested on input path.
565 ACL plugin configured and tested on output path.
567 .. topic:: ACL_STATELESS
569 ACL plugin configured and tested in stateless mode (permit action).
571 .. topic:: ACL_STATEFUL
573 ACL plugin configured and tested in stateful mode (permit+reflect action).
577 ACL plugin configured and tested with 1 not-hitting ACE.
581 ACL plugin configured and tested with 10 not-hitting ACEs.
585 ACL plugin configured and tested with 50 not-hitting ACEs.
587 .. topic:: SRv6_PROXY
589 SRv6 endpoint to SR-unaware appliance via proxy.
591 .. topic:: SRv6_PROXY_STAT
593 SRv6 endpoint to SR-unaware appliance via static proxy.
595 .. topic:: SRv6_PROXY_DYN
597 SRv6 endpoint to SR-unaware appliance via dynamic proxy.
599 .. topic:: SRv6_PROXY_MASQ
601 SRv6 endpoint to SR-unaware appliance via masquerading proxy.
616 IPSec in transport mode.
620 IPSec in tunnel mode.
627 All test cases which use at least one virtual machine.
631 All test cases which use Linux container and LXC utils.
635 All test cases which use at least one Docker container.
639 All test cases which use Docker as container manager.
643 All test cases with specific APP use.
645 Container Orchestration Tags
646 ----------------------------
650 All test cases which use Kubernetes for orchestration.
652 .. topic:: SFC_CONTROLLER
654 All test cases which use ligato/sfc_controller for driving configuration
655 of vpp inside container.
659 All test cases which use Golang implementation of a control/management plane
664 VPP running in Docker container acting as VSWITCH.
668 1 VPP running in Docker container acting as VNF work load.
672 2 VPP running in 2 Docker containers acting as VNF work load.
676 4 VPP running in 4 Docker containers acting as VNF work load.
684 All test cases using single poll mode thread.
689 All test cases using more then one poll mode driver thread.
693 All test cases with packet processing on single socket.
697 All test cases with packet processing on two sockets.
701 1 worker thread pinned to 1 dedicated physical core; or if HyperThreading is
702 enabled, 2 worker threads each pinned to a separate logical core within 1
703 dedicated physical core. Main thread pinned to core 1.
707 2 worker threads pinned to 2 dedicated physical cores; or if HyperThreading
708 is enabled, 4 worker threads each pinned to a separate logical core within 2
709 dedicated physical cores. Main thread pinned to core 1.
713 4 worker threads pinned to 4 dedicated physical cores; or if HyperThreading
714 is enabled, 8 worker threads each pinned to a separate logical core within 4
715 dedicated physical cores. Main thread pinned to core 1.
720 1 worker thread pinned to 1 dedicated physical core. 1 receive queue per
721 interface. Main thread pinned to core 1.
726 2 worker threads pinned to 2 dedicated physical cores. 1 receive queue per
727 interface. Main thread pinned to core 1.
732 4 worker threads pinned to 4 dedicated physical cores. 2 receive queues per
733 interface. Main thread pinned to core 1.
738 2 worker threads each pinned to a separate logical core within 1 dedicated
739 physical core. 1 receive queue per interface. Main thread pinned to core 1.
744 4 worker threads each pinned to a separate logical core within 2 dedicated
745 physical cores. 2 receive queues per interface. Main thread pinned to core
751 8 worker threads each pinned to a separate logical core within 4 dedicated
752 physical cores. 4 receive queues per interface. Main thread pinned to core
760 Honeycomb functional test cases.
764 Honeycomb NSH test cases.
766 .. topic:: HC_PERSIST
768 Honeycomb persistence test cases.
770 .. topic:: HC_REST_ONLY
772 (Exclusion tag) Honeycomb test cases that cannot be run in Netconf mode
773 using ODL client for Restfconf -> Netconf translation.