CSIT-450: Refactor LISP files
[csit.git] / tests / func / lisp / ipv4_lispgpe_ipv6.robot
1 # Copyright (c) 2016 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/default.robot
16 | Resource | resources/libraries/robot/testing_path.robot
17 | Resource | resources/libraries/robot/ipv4.robot
18 | Resource | resources/libraries/robot/traffic.robot
19 | Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
20 | Resource | resources/libraries/robot/l2_traffic.robot
21 | Library  | resources.libraries.python.IPUtil
22 | Library  | resources.libraries.python.Trace
23 # import additional Lisp settings from resource file
24 | Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py
25 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
26 | ... | VM_ENV | HW_ENV
27 | Test Setup | Run Keywords | Setup all DUTs before test
28 | ...        | AND          | Setup all TGs before traffic script
29 | ...        | AND          | Update All Interface Data On All Nodes | ${nodes}
30 | Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
31 | ...           | AND          | Show vpp trace dump on all DUTs
32 | Documentation | *LISP static adjacency test cases*
33 | ...
34 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
35 | ... | with single links between nodes.
36 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2,\
37 | ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
38 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
39 | ... | routing and static routes. LISPoIPv4 tunnel is configured\
40 | ... | between DUT1 and DUT2.
41 | ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\
42 | ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\
43 | ... | TG verifies packets for correctness and their IPv6 src-addr,\
44 | ... | dst-addr and MAC addresses.
45 | ... | *[Ref] Applicable standard specifications:* RFC6830.
46
47 *** Test Cases ***
48 | TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv4 tunnel
49 | | [Documentation]
50 | | ... | [Top] TG-DUT1-DUT2-TG.
51 | | ... | [Enc] Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\
52 | | ... | TG-DUTn.
53 | | ... | [Cfg] On DUT1 and DUT2 configure IPv4 LISP static adjacencies.
54 | | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across both\
55 | | ... | DUTs and LISP tunnel between them; verify IPv6 headers on received\
56 | | ... | packets are correct.
57 | | ... | [Cfg2] Reconf LISP.
58 | | ... | [Ver2] Verify packets are received again via LISP tunnel.
59 | | ... | [Ref] RFC6830.
60 | | Given Path for 3-node testing is set
61 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
62 | | And   Interfaces in 3-node path are up
63 | | And   IP addresses are set on interfaces
64 | |       ... | ${dut1_node} | ${dut1_to_dut2}
65 | |       ... | ${dut1_to_dut2_ip6o4} | ${dut_prefix6o4}
66 | |       ... | ${dut1_node} | ${dut1_to_tg}
67 | |       ... | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4}
68 | |       ... | ${dut2_node} | ${dut2_to_dut1}
69 | |       ... | ${dut2_to_dut1_ip6o4} | ${dut_prefix6o4}
70 | |       ... | ${dut2_node} | ${dut2_to_tg}
71 | |       ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4}
72 | | And   VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4}
73 | | And   VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4}
74 | | And   Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4}
75 | |       ... | ${tg_to_dut2_mac}
76 | | And   Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4}
77 | |       ... | ${tg_to_dut1_mac}
78 | | When Set up Lisp topology
79 | |      ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
80 | |      ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
81 | |      ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
82 | |      ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
83 | | Then Send Packet And Check Headers
84 | |      ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4}
85 | |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
86 | |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
87 | | And Send Packet And Check Headers
88 | |      ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4}
89 | |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
90 | |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
91 | | When Change Lisp Configuration | ${dut1_node} | ${dut2_node}
92 | |      ... | ${dut1_to_dut2} | ${dut2_to_dut1} | ${dut1_to_dut2_mac}
93 | |      ... | ${dut2_to_dut1_mac} | ${dut1_to_dut2_ip6o4}
94 | |      ... | ${dut2_to_dut1_ip6o4_reconf} | ${dut_prefix6o4}
95 | |      ... | ${dut1_ip6o4_static_adjacency}
96 | |      ... | ${dut1_ip6o4_static_adjacency_reconf}
97 | | Then Send Packet And Check Headers
98 | |      ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4}
99 | |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
100 | |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
101 | | And Send Packet And Check Headers
102 | |      ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4}
103 | |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
104 | |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}