feat(ipsec): Use strings instead of enums in Robot
[csit.git] / tests / vpp / perf / crypto / 2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot
1 # Copyright (c) 2024 Intel and/or its affiliates.
2 # Copyright (c) 2024 Cisco and/or its affiliates.
3 # Licensed under the Apache License, Version 2.0 (the "License");
4 # you may not use this file except in compliance with the License.
5 # You may obtain a copy of the License at:
6 #
7 #     http://www.apache.org/licenses/LICENSE-2.0
8 #
9 # Unless required by applicable law or agreed to in writing, software
10 # distributed under the License is distributed on an "AS IS" BASIS,
11 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 # See the License for the specific language governing permissions and
13 # limitations under the License.
14
15 *** Settings ***
16 | Resource | resources/libraries/robot/shared/default.robot
17 |
18 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR
19 | ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE
20 | ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI
21 | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_4
22 | ... | ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir
23 |
24 | Suite Setup | Setup suite topology interfaces | performance
25 | Suite Teardown | Tear down suite | performance
26 | Test Setup | Setup test | performance
27 | Test Teardown | Tear down test | performance | ipsec_sa
28 |
29 | Test Template | Local Template
30 |
31 | Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.**
32 | ... |
33 | ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
34 | ... | with single links between nodes.
35 | ... |
36 | ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \
37 | ... | Eth-IPv4-IPSec on DUT1-TG.
38 | ... |
39 | ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \
40 | ... | tunnels between it and TG, run with IPsec async mode and use crypto \
41 | ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \
42 | ... | IPv4 traffic from TG, encrypts it and sends back to TG.
43 | ... |
44 | ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
45 | ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
46 | ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
47 | ... | expressed in percentage of packets transmitted. NDR and PDR are \
48 | ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
49 | ... | library.
50 | ... | Test packets are generated by TG on links to DUTs. \
51 | ... | TG traffic profile contains one L3 flow-groups (number of flows \
52 | ... | per flow-group equals to number of IPSec tunnels) with all packets \
53 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
54 | ... | static payload. MAC addresses are matching MAC addresses of the TG \
55 | ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
56 | ... | field is applied to the stream.
57 | ... |
58 | ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
59
60 *** Variables ***
61 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
62 | ... | crypto_native_plugin.so
63 | ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so
64 | ... | crypto_openssl_plugin.so
65 | ${crypto_type}= | ${None}
66 | ${encr_alg}= | AES GCM 128
67 | ${auth_alg}= | NONE
68 | ${nic_name}= | Intel-X710
69 | ${nic_driver}= | vfio-pci
70 | ${nic_rxq_size}= | 0
71 | ${nic_txq_size}= | 0
72 | ${nic_pfs}= | 2
73 | ${nic_vfs}= | 0
74 | ${osi_layer}= | L3
75 | ${overhead}= | ${54}
76 | ${tg_if1_ip4}= | 192.168.10.2
77 | ${dut1_if1_ip4}= | 192.168.10.1
78 | ${tun_if1_ip4}= | 100.0.0.1
79 | ${tun_if2_ip4}= | 200.0.0.2
80 | ${raddr_ip4}= | 20.0.0.0
81 | ${laddr_ip4}= | 10.0.0.0
82 | ${addr_range}= | ${24}
83 | ${n_tunnels}= | ${4}
84 | ${dp_cores_count}= | ${1}
85 # Traffic profile:
86 | ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir
87 | ${traffic_directions}= | ${1}
88
89 *** Keywords ***
90 | Local Template
91 | | [Documentation]
92 | | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \
93 | | ... | Each DUT uses one physical core for data plane workers \
94 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
95 | | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
96 | |
97 | | ... | *Arguments:*
98 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
99 | | ... | Type: integer, string
100 | | ... | - phy_cores - Total number of physical cores. Type: integer
101 | | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer
102 | |
103 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
104 | |
105 | | Set Test Variable | \${frame_size}
106 | |
107 | | Given Set Max Rate And Jumbo
108 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
109 | | And Pre-initialize layer driver | ${nic_driver}
110 | | And Apply startup configuration on all VPP DUTs
111 | | When Initialize layer driver | ${nic_driver}
112 | | And Initialize layer interface
113 | | And Enable IPSec Async Mode on all VPP DUTs
114 | | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs
115 | | And Initialize IPSec in 2-node circular topology
116 | | And VPP IPsec Create Tunnel Interfaces
117 | | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0]
118 | | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
119 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
120 | | Then Find NDR and PDR intervals using optimized search
121
122 *** Test Cases ***
123 | 64B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr
124 | | [Tags] | 64B | 2C
125 | | frame_size=${64} | phy_cores=${2}
126
127 | 64B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr
128 | | [Tags] | 64B | 3C
129 | | frame_size=${64} | phy_cores=${3}
130
131 | 64B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr
132 | | [Tags] | 64B | 4C
133 | | frame_size=${64} | phy_cores=${4}
134
135 | 1518B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr
136 | | [Tags] | 1518B | 2C
137 | | frame_size=${1518} | phy_cores=${2}
138
139 | 1518B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr
140 | | [Tags] | 1518B | 3C
141 | | frame_size=${1518} | phy_cores=${3}
142
143 | 1518B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr
144 | | [Tags] | 1518B | 4C
145 | | frame_size=${1518} | phy_cores=${4}
146
147 | 9000B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr
148 | | [Tags] | 9000B | 2C
149 | | frame_size=${9000} | phy_cores=${2}
150
151 | 9000B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr
152 | | [Tags] | 9000B | 3C
153 | | frame_size=${9000} | phy_cores=${3}
154
155 | 9000B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr
156 | | [Tags] | 9000B | 4C
157 | | frame_size=${9000} | phy_cores=${4}
158
159 | IMIX-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr
160 | | [Tags] | IMIX | 2C
161 | | frame_size=IMIX_v4_1 | phy_cores=${2}
162
163 | IMIX-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr
164 | | [Tags] | IMIX | 3C
165 | | frame_size=IMIX_v4_1 | phy_cores=${3}
166
167 | IMIX-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr
168 | | [Tags] | IMIX | 4C
169 | | frame_size=IMIX_v4_1 | phy_cores=${4}