Add Test Suite for VPP WireGuard
[csit.git] / tests / vpp / perf / ip4_tunnels / 10ge2p1x710-ethip4udpwireguard1tnlsw-ip4base-ndrpdr.robot
1 # Copyright (c) 2022 Intel and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 | Resource | resources/libraries/robot/wireguard/wireguard.robot
17 |
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
19 | ... | IP4FWD |  NIC_Intel-X710 | WIREGUARD | DRV_VFIO_PCI
20 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
21 | ... | ethip4udpwireguard1tnlsw-ip4base-ndrpdr
22 |
23 | Suite Setup | Setup suite topology interfaces | performance
24 | Suite Teardown | Tear down suite | performance
25 | Test Setup | Setup test | performance
26 |
27 | Test Template | Local Template
28 |
29 | Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.**
30 | ... |
31 | ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
32 | ... | topology with single links between nodes.
33 | ... |
34 | ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
35 | ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2.
36 | ... |
37 | ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
38 | ... | single WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \
39 | ... | and send to another DUT, where packets are decrypted and sent back \
40 | ... | to TG.
41 | ... |
42 | ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
43 | ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
44 | ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
45 | ... | expressed in percentage of packets transmitted. NDR and PDR are \
46 | ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
47 | ... | library.
48 | ... | Test packets are generated by TG on \
49 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
50 | ... | (flow-group per direction, number of flows per flow-group equals to \
51 | ... | number of WireGuard tunnels) with all packets \
52 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
53 | ... | static payload. MAC addresses are matching MAC addresses of the TG \
54 | ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
55 | ... | is applied to both streams.
56 | ... |
57 | ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
58
59
60 *** Variables ***
61 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
62 | ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
63 | ... | wireguard_plugin.so | crypto_openssl_plugin.so
64 | ${crypto_type}= | ${None}
65 | ${nic_name}= | Intel-X710
66 | ${nic_driver}= | vfio-pci
67 | ${nic_rxq_size}= | 0
68 | ${nic_txq_size}= | 0
69 | ${nic_pfs}= | 2
70 | ${nic_vfs}= | 0
71 | ${osi_layer}= | L3
72 | ${overhead}= | ${60}
73 | ${tg_if1_ip4}= | 192.168.10.2
74 | ${dut1_if1_ip4}= | 192.168.10.1
75 | ${dut1_if2_ip4}= | 200.0.0.1
76 | ${dut2_if1_ip4}= | 200.0.0.2
77 | ${dut2_if2_ip4}= | 192.168.20.1
78 | ${tg_if2_ip4}= | 192.168.20.2
79 | ${wg_if1_ip4}= | 192.168.110.1
80 | ${wg_if2_ip4}= | 192.168.120.1
81 | ${raddr_ip4}= | 20.0.0.0
82 | ${laddr_ip4}= | 10.0.0.0
83 | ${n_tunnels}= | ${1}
84 | ${listen_port}= | ${51820}
85 | ${keepalive_time}= | ${256}
86 # Traffic profile:
87 | ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}
88
89 *** Keywords ***
90 | Local Template
91 | | [Documentation]
92 | | ... | - **[Cfg]** DUT runs wireguard TUNNEL. \
93 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
94 | | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
95 | |
96 | | ... | *Arguments:*
97 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
98 | | ... | Type: integer, string
99 | | ... | - phy_cores - Number of physical cores. Type: integer
100 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
101 | |
102 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
103 | |
104 | | Set Test Variable | \${frame_size}
105 | |
106 | | Given Set Max Rate And Jumbo
107 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
108 | | And Pre-initialize layer driver | ${nic_driver}
109 | | And Apply startup configuration on all VPP DUTs
110 | | When Initialize layer driver | ${nic_driver}
111 | | And Initialize layer interface
112 | | And Initialize WireGuard in 3-node circular topology
113 | | And VPP WireGuard Create Tunnel Interface On DUTs
114 | | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0]
115 | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0]
116 | | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4}
117 | | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time}
118 | | ... | ${laddr_ip4} | ${raddr_ip4}
119 | | Then Find NDR and PDR intervals using optimized search
120
121 *** Test Cases ***
122 | 64B-1c-ethip4udpwireguard1tnlsw-ip4base-ndrpdr
123 | | [Tags] | 64B | 1C
124 | | frame_size=${64} | phy_cores=${1}
125
126 | 64B-2c-ethip4udpwireguard1tnlsw-ip4base-ndrpdr
127 | | [Tags] | 64B | 2C
128 | | frame_size=${64} | phy_cores=${2}
129
130 | 64B-4c-ethip4udpwireguard1tnlsw-ip4base-ndrpdr
131 | | [Tags] | 64B | 4C
132 | | frame_size=${64} | phy_cores=${4}
133
134 | 1518B-1c-ethip4udpwireguard1tnlsw-ip4base-ndrpdr
135 | | [Tags] | 1518B | 1C
136 | | frame_size=${1518} | phy_cores=${1}
137
138 | 1518B-2c-ethip4udpwireguard1tnlsw-ip4base-ndrpdr
139 | | [Tags] | 1518B | 2C
140 | | frame_size=${1518} | phy_cores=${2}
141
142 | 1518B-4c-ethip4udpwireguard1tnlsw-ip4base-ndrpdr
143 | | [Tags] | 1518B | 4C
144 | | frame_size=${1518} | phy_cores=${4}
145
146 | 9000B-1c-ethip4udpwireguard1tnlsw-ip4base-ndrpdr
147 | | [Tags] | 9000B | 1C
148 | | frame_size=${9000} | phy_cores=${1}
149
150 | 9000B-2c-ethip4udpwireguard1tnlsw-ip4base-ndrpdr
151 | | [Tags] | 9000B | 2C
152 | | frame_size=${9000} | phy_cores=${2}
153
154 | 9000B-4c-ethip4udpwireguard1tnlsw-ip4base-ndrpdr
155 | | [Tags] | 9000B | 4C
156 | | frame_size=${9000} | phy_cores=${4}
157
158 | IMIX-1c-ethip4udpwireguard1tnlsw-ip4base-ndrpdr
159 | | [Tags] | IMIX | 1C
160 | | frame_size=IMIX_v4_1 | phy_cores=${1}
161
162 | IMIX-2c-ethip4udpwireguard1tnlsw-ip4base-ndrpdr
163 | | [Tags] | IMIX | 2C
164 | | frame_size=IMIX_v4_1 | phy_cores=${2}
165
166 | IMIX-4c-ethip4udpwireguard1tnlsw-ip4base-ndrpdr
167 | | [Tags] | IMIX | 4C
168 | | frame_size=IMIX_v4_1 | phy_cores=${4}