CSIT-1186: Add MRR and NDRPDR ip6_tunnels tests
[csit.git] / tests / vpp / perf / ip6_tunnels / 10ge2p1x520-ethip6lispip6-ip6base-mrr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
17 | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
18 | ...
19 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
20 | ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY
21 | ...
22 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
23 | ... | L3 | Intel-X520-DA2
24 | Suite Teardown | Tear down 3-node performance topology
25 | ...
26 | Test Setup | Set up performance test
27 | ...
28 | Test Teardown | Tear down performance mrr test
29 | ...
30 | Test Template | Local Template
31 | ...
32 | Documentation | *RFC6830: Pkt throughput Lisp test cases*
33 | ...
34 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
35 | ... | with single links between nodes.\
36 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6 on DUT1-DUT2,\
37 | ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.\
38 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
39 | ... | routing and static routes. LISPoIPv6 tunnel is configured between\
40 | ... | DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic\
41 | ... | by Intel.\
42 | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
43 | ... | at line rate and reports total received/sent packets over trial period.\
44 | ... | *[Ref] Applicable standard specifications:* RFC6830.
45
46 *** Variables ***
47 # X520-DA2 bandwidth limit
48 | ${s_limit} | ${10000000000}
49 # LISP overhead
50 | ${overhead} | 8
51 # Traffic profile:
52 | ${traffic_profile} | trex-sl-3n-ethip6-ip6src253
53
54 *** Keywords ***
55 | Local Template
56 | | [Documentation]
57 | | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
58 | | ... | filters config.\
59 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\
60 | | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
61 | | ... | trial throughput test.\
62 | | ...
63 | | ... | *Arguments:*
64 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
65 | | ... |   Type: integer, string
66 | | ... | - phy_cores - Number of physical cores. Type: integer
67 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
68 | | ...
69 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
70 | | ...
71 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
72 | | And Add PCI devices to all DUTs
73 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
74 | | ... | ${s_limit} | ${framesize} | overhead=${overhead}
75 | | And Apply startup configuration on all VPP DUTs
76 | | When Initialize LISP IPv6 forwarding in 3-node circular topology
77 | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
78 | | ... | ${dut2_to_tg_ip6} | ${prefix6}
79 | | And Configure LISP topology in 3-node circular topology
80 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
81 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
82 | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
83 | | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
84 | | Then Traffic should pass with maximum rate
85 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
86
87 *** Test Cases ***
88 | tc01-78B-1c-ethip6lispip6-ip6base-mrr
89 | | [Tags] | 78B | 1C
90 | | framesize=${78} | phy_cores=${1}
91
92 | tc02-78B-2c-ethip6lispip6-ip6base-mrr
93 | | [Tags] | 78B | 2C
94 | | framesize=${78} | phy_cores=${2}
95
96 | tc03-78B-4c-ethip6lispip6-ip6base-mrr
97 | | [Tags] | 78B | 4C
98 | | framesize=${78} | phy_cores=${4}
99
100 | tc04-1518B-1c-ethip6lispip6-ip6base-mrr
101 | | [Tags] | 1518B | 1C
102 | | framesize=${1518} | phy_cores=${1}
103
104 | tc05-1518B-2c-ethip6lispip6-ip6base-mrr
105 | | [Tags] | 1518B | 2C
106 | | framesize=${1518} | phy_cores=${2}
107
108 | tc06-1518B-4c-ethip6lispip6-ip6base-mrr
109 | | [Tags] | 1518B | 4C
110 | | framesize=${1518} | phy_cores=${4}
111
112 | tc07-9000B-1c-ethip6lispip6-ip6base-mrr
113 | | [Tags] | 9000B | 1C
114 | | framesize=${9000} | phy_cores=${1}
115
116 | tc08-9000B-2c-ethip6lispip6-ip6base-mrr
117 | | [Tags] | 9000B | 2C
118 | | framesize=${9000} | phy_cores=${2}
119
120 | tc09-9000B-4c-ethip6lispip6-ip6base-mrr
121 | | [Tags] | 9000B | 4C
122 | | framesize=${9000} | phy_cores=${4}
123
124 | tc10-IMIX-1c-ethip6lispip6-ip6base-mrr
125 | | [Tags] | IMIX | 1C
126 | | framesize=IMIX_v4_1 | phy_cores=${1}
127
128 | tc11-IMIX-2c-ethip6lispip6-ip6base-mrr
129 | | [Tags] | IMIX | 2C
130 | | framesize=IMIX_v4_1 | phy_cores=${2}
131
132 | tc12-IMIX-4c-ethip6lispip6-ip6base-mrr
133 | | [Tags] | IMIX | 4C
134 | | framesize=IMIX_v4_1 | phy_cores=${4}

©2016 FD.io a Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation. Linux is a registered trademark of Linus Torvalds.
Please see our privacy policy and terms of use.