Make RXQs/TXQs configurable
[csit.git] / tests / vpp / perf / nfv_density / dcr_memif / chain_ipsec / 10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
1 # Copyright (c) 2020 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
18 | ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
19 | ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
20 | ... | AES_256_GCM | AES | DRV_VFIO_PCI
21 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
22 | ... | ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm
23 |
24 | Suite Setup | Setup suite single link | performance
25 | Suite Teardown | Tear down suite | performance
26 | Test Setup | Setup test | performance
27 | Test Teardown | Tear down test | performance | container
28 |
29 | Test Template | Local Template
30 |
31 | Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
32 | ... | 2 docker container*
33 |
34 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
35 | ... | with single links between nodes.
36 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
37 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
38 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
39 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
40 | ... | of packets transmitted. NDR and PDR are discovered for different\
41 | ... | Ethernet L2 frame sizes using MLRsearch library.\
42 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
43 | ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
44 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
45 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
46 | ... | addresses of the TG node interfaces.
47 | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
48
49 *** Variables ***
50 | @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
51 | ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
52 | ... | crypto_openssl_plugin.so
53 | ${crypto_type}= | ${None}
54 | ${nic_name}= | Intel-X710
55 | ${nic_driver}= | vfio-pci
56 | ${nic_rxq_size}= | 0
57 | ${nic_txq_size}= | 0
58 | ${osi_layer}= | L2
59 | ${overhead}= | ${54}
60 | ${tg_if1_ip4}= | 192.168.10.254
61 | ${dut1_if1_ip4}= | 192.168.10.1
62 | ${dut1_if2_ip4}= | 100.0.0.254
63 | ${dut2_if1_ip4}= | 200.0.0.1
64 | ${dut2_if2_ip4}= | 192.168.20.1
65 | ${tg_if2_ip4}= | 192.168.20.254
66 | ${raddr_ip4}= | 20.0.0.0
67 | ${laddr_ip4}= | 10.0.0.0
68 | ${addr_range}= | ${24}
69 | ${n_instances}= | ${2}
70 | ${n_tunnels}= | ${4}
71 | ${nf_dtcr}= | ${1}
72 | ${nf_dtc}= | ${1}
73 # Traffic profile:
74 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
75 # Container
76 | ${container_engine}= | Docker
77 | ${container_chain_topology}= | chain_ipsec
78
79 *** Keywords ***
80 | Local Template
81 | | [Documentation]
82 | | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
83 | | ... | containers.
84 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
85 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
86 | |
87 | | ... | *Arguments:*
88 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
89 | | ... | Type: integer, string
90 | | ... | - phy_cores - Number of physical cores. Type: integer
91 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
92 | |
93 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
94 | |
95 | | Set Test Variable | \${frame_size}
96 | |
97 | | # These are enums (not strings) so they cannot be in Variables table.
98 | | ${encr_alg}= | Crypto Alg AES GCM 256
99 | | ${auth_alg}= | Set Variable | ${None}
100 | | ${ipsec_proto} = | IPsec Proto ESP
101 | |
102 | | Given Set Max Rate And Jumbo
103 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
104 | | And Pre-initialize layer driver | ${nic_driver}
105 | | And Apply startup configuration on all VPP DUTs
106 | | When Initialize layer driver | ${nic_driver}
107 | | And Initialize IPSec in 3-node circular topology
108 | | And Stop VPP service on all DUTs | ${nodes}
109 | | And VPP IPsec Create Tunnel Interfaces in Containers
110 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
111 | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
112 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
113 | | And Start containers for test
114 | | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
115 | | ... | pinning=${False}
116 | | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
117 | | Then Find NDR and PDR intervals using optimized search
118
119 *** Test Cases ***
120 | tc01-64B-1c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
121 | | [Tags] | 64B | 1C
122 | | frame_size=${64} | phy_cores=${1}
123
124 | tc02-64B-2c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
125 | | [Tags] | 64B | 2C
126 | | frame_size=${64} | phy_cores=${2}
127
128 | tc03-64B-4c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
129 | | [Tags] | 64B | 4C
130 | | frame_size=${64} | phy_cores=${4}
131
132 | tc04-1518B-1c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
133 | | [Tags] | 1518B | 1C
134 | | frame_size=${1518} | phy_cores=${1}
135
136 | tc05-1518B-2c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
137 | | [Tags] | 1518B | 2C
138 | | frame_size=${1518} | phy_cores=${2}
139
140 | tc06-1518B-4c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
141 | | [Tags] | 1518B | 4C
142 | | frame_size=${1518} | phy_cores=${4}
143
144 | tc10-IMIX-1c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
145 | | [Tags] | IMIX | 1C
146 | | frame_size=IMIX_v4_1 | phy_cores=${1}
147
148 | tc11-IMIX-2c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
149 | | [Tags] | IMIX | 2C
150 | | frame_size=IMIX_v4_1 | phy_cores=${2}
151
152 | tc12-IMIX-4c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
153 | | [Tags] | IMIX | 4C
154 | | frame_size=IMIX_v4_1 | phy_cores=${4}