CSIT-811 HC Test: BGP tests - IPv4 CRUD

[csit.git] / resources / libraries / robot / honeycomb / bgp.robot

diff --git a/resources/libraries/robot/honeycomb/bgp.robot b/resources/libraries/robot/honeycomb/bgp.robot
new file mode 100644 (file)
index 0000000..d4c2d6b
--- /dev/null
+++ b/resources/libraries/robot/honeycomb/bgp.robot
@@ -0,0 +1,173 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.honeycomb.BGP.BGPKeywords
+| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
+
+*** Keywords ***
+| No BGP peers should be configured
+| | [Documentation] | Uses Honeycomb API to read BGP configuration and checks
+| | ... | if there ary BGP peers conffigured.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| No BGP peers should be configured \| ${nodes['DUT1']} \|
+| | ...
+| | [Arguments] | ${node}
+| | ...
+| | ${oper_data}= | Get Full BGP Configuration | ${node}
+| | Should be Empty | ${oper_data['bgp-openconfig-extensions:bgp']['neighbors']}
+
+| Honeycomb adds BGP peer
+| | [Documentation] | Uses Honeycomb API to add a BGP peer.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - address - IP address of the peer. Type: string
+| | ... | - data - Peer configuration data. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb adds BGP peer \| ${nodes['DUT1']} \| 192.168.0.1 \
+| | ... | \| ${data} \|
+| | ...
+| | [Arguments] | ${node} | ${address} | ${data}
+| | ...
+| | Add BGP Peer | ${node} | ${address} | ${data}
+
+| BGP Peer From Honeycomb Should be
+| | [Documentation] | Uses Honeycomb API to verify BGP peer operational data.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - address - IP address of the peer. Type: string
+| | ... | - data - Peer configuration data. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| BGP Peer From Honeycomb Should be \
+| | ... | \| ${nodes['DUT1']} \| 192.168.0.1 \| ${data} \|
+| | ...
+| | [Arguments] | ${node} | ${address} | ${data}
+| | ...
+| | ${oper_data}= | Get BGP Peer | ${node} | ${address}
+| | Compare Data Structures | ${oper_data} | ${data}
+
+| Honeycomb removes BGP peer
+| | [Documentation] | Uses Honeycomb API to add a BGP peer.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - address - IP address of the peer. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb adds BGP peer \| ${nodes['DUT1']} \| 192.168.0.1 \|
+| | ...
+| | [Arguments] | ${node} | ${address}
+| | ...
+| | Remove BGP Peer | ${node} | ${address}
+
+| Honeycomb configures BGP route
+| | [Documentation] | Uses Honeycomb API to add a BGP route\
+| | ... | to the specified peer.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - peer_address - IP address of the peer. Type: string
+| | ... | - data - Peer configuration data. Type: dictionary
+| | ... | - route_address - IP address of the route. Type: string
+| | ... | - route_index - Numeric index of the route under the peer.\
+| | ... | Type: integer
+| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb adds BGP peer \| ${nodes['DUT1']} \| 192.168.0.1 \
+| | ... | \| ${data} \| 192.168.0.2 \| ${0} \| ipv4 \|
+| | ...
+| | [Arguments] | ${node} | ${peer_address} | ${data}
+| | ... | ${route_address} | ${route_index} | ${ip_version}
+| | ...
+| | Configure BGP Route | ${node} | ${peer_address} | ${data}
+| | ... | ${route_address} | ${route_index} | ${ip_version}
+
+| BGP Route From Honeycomb Should be
+| | [Documentation] | Uses Honeycomb API to verify BGP route operational data.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - peer_address - IP address of the peer. Type: string
+| | ... | - data - Peer configuration data. Type: dictionary
+| | ... | - route_address - IP address of the route. Type: string
+| | ... | - route_index - Numeric index of the route under the peer.\
+| | ... | Type: integer
+| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| BGP Peers From Honeycomb Should Include \
+| | ... | \| ${nodes['DUT1']} \| ${data} \|
+| | ...
+| | [Arguments] | ${node} | ${peer_address} | ${data}
+| | ... | ${route_address} | ${route_index} | ${ip_version}
+| | ...
+| | ${oper_data}= | Get BGP Route | ${node} | ${peer_address}
+| | ... | ${route_address} | ${route_index} | ${ip_version}
+| | Compare Data Structures | ${oper_data} | ${data}
+
+| Honeycomb removes BGP route
+| | [Documentation] | Uses Honeycomb API to remove a BGP route.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - peer_address - IP address of the peer. Type: string
+| | ... | - route_address - IP address of the route. Type: string
+| | ... | - route_index - Numeric index of the route under the peer.\
+| | ... | Type: integer
+| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb removes BGP route \| ${nodes['DUT1']} \| 192.168.0.1 \
+| | ... | \| 192.168.0.2 \| ${0} \| ipv4 \|
+| | ...
+| | [Arguments] | ${node} | ${peer_address} | ${route_address}
+| | ... | ${route_index} | ${ip_version}
+| | ...
+| | Remove BGP Route | ${node} | ${peer_address} | ${route_address}
+| | ... | ${route_index} | ${ip_version}
+
+| No BGP routes should be configured
+| | [Documentation] | Uses Honeycomb API to verify that no BGP routes\
+| | ... | are configured under the specified peer.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - peer_address - IP address of the peer. Type: string
+| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| No BGP routes should be configured \| ${nodes['DUT1']} \
+| | ... | \| 192.168.0.1 \| ipv4 \|
+| | ...
+| | [Arguments] | ${node} | ${peer_address} | ${ip_version}
+| | ...
+| | ${oper_data}= | Get All Peer Routes
+| | ... | ${node} | ${peer_address} | ${ip_version}
+| | Should be Empty | ${oper_data['bgp-inet:${ip_version}-routes']}