-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
-# import additional Lisp settings from resource file
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_LONG
-| ... | NIC_Intel-X520-DA2 | PERFTEST_ENCAP | LISP
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
+| ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv6
+| ...
| Documentation | *RFC6830: Pkt throughput Lisp test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | *[Ref] Applicable standard specifications:* RFC6830.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
-| TC01: 78B NDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 1thread 1core 1rxq
+| tc01-78B-1t1c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 1 thread, 1 phy core, 1 receive queue per NIC\
| | ... | port.
| | ... | [Ver] Find NDR for 78 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6
+| | [Tags] | 1T1C | STHREAD | NDRDISC
| | ${framesize}= | Set Variable | ${78}
| | ${min_rate}= | Set Variable | ${100000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| TC02: 78B PDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 1thread 1core 1rxq
+| tc02-78B-1t1c-ethip6lispip6-ip6base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 1 thread, 1 phy core, 1 receive queue per NIC\
| | ... | port.
| | ... | [Ver] Find PDR for 78 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${78}
| | ${min_rate}= | Set Variable | ${100000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-| TC03: 1460B NDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 1thread 1core 1rxq
+| tc03-1460B-1t1c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 1 thread, 1 phy core, 1 receive queue per NIC\
| | ... | port.
| | ... | [Ver] Find NDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6
+| | [Tags] | 1T1C | STHREAD | NDRDISC
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| TC04: 1460B PDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 1thread 1core 1rxq
+| tc04-1460B-1t1c-ethip6lispip6-ip6base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 1 thread, 1 phy core, 1 receive queue per NIC\
| | ... | port.
| | ... | [Ver] Find PDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-| TC05: 9000B NDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 1thread 1core 1rxq
+| tc05-9000B-1t1c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 1 thread, 1 phy core, 1 receive queue per NIC\
| | ... | port.
| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6
+| | [Tags] | 1T1C | STHREAD | NDRDISC
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| TC06: 9000B PDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 1thread 1core 1rxq
+| tc06-9000B-1t1c-ethip6lispip6-ip6base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 1 thread, 1 phy core, 1 receive queue per NIC\
| | ... | port.
| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 5kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-| TC07: 78B NDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 2thread 2core 1rxq
+| tc07-78B-2t2c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 2 threads, 2 phy cores, 1 receive queue per NIC\
| | ... | port.
| | ... | [Ver] Find NDR for 78 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6
+| | [Tags] | 2T2C | MTHREAD | NDRDISC
| | ${framesize}= | Set Variable | ${78}
| | ${min_rate}= | Set Variable | ${100000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| TC08: 78B PDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 2thread 2core 1rxq
+| tc08-78B-2t2c-ethip6lispip6-ip6base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 2 threads, 2 phy cores, 1 receive queue per NIC\
| | ... | port.
| | ... | [Ver] Find PDR for 78 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${78}
| | ${min_rate}= | Set Variable | ${100000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-| TC09: 1460B NDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 2thread 2core 1rxq
+| tc09-1460B-2t2c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 2 threads, 2 phy cores, 1 receive queue per NIC\
| | ... | port.
| | ... | [Ver] Find NDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| TC10: 1460B PDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 2thread 2core 1rxq
+| tc10-1460B-2t2c-ethip6lispip6-ip6base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 2 threads, 2 phy cores, 1 receive queue per NIC\
| | ... | port.
| | ... | [Ver] Find PDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-| TC11: 9000B NDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 2thread 2core 1rxq
+| tc11-9000B-2t2c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 2 threads, 2 phy cores, 1 receive queue per NIC\
| | ... | port.
| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| TC12: 9000B PDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 2thread 2core 1rxq
+| tc12-9000B-2t2c-ethip6lispip6-ip6base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 2 threads, 2 phy cores, 1 receive queue per NIC\
| | ... | port.
| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-| TC13: 78B NDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 4thread 4core 2rxq
+| tc13-78B-4t4c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 4 threads, 4 phy cores, 2 receive queues per NIC\
| | ... | port.
| | ... | [Ver] Find NDR for 78 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6
+| | [Tags] | 4T4C | MTHREAD | NDRDISC
| | ${framesize}= | Set Variable | ${78}
| | ${min_rate}= | Set Variable | ${100000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| TC14: 78B PDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 4thread 4core 2rxq
+| tc14-78B-4t4c-ethip6lispip6-ip6base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 4 threads, 4 phy cores, 2 receive queues per NIC\
| | ... | port.
| | ... | [Ver] Find PDR for 78 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${78}
| | ${min_rate}= | Set Variable | ${100000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-| TC15: 1460B NDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 4thread 4core 2rxq
+| tc15-1460B-4t4c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 4 threads, 4 phy cores, 2 receive queues per NIC\
| | ... | port.
| | ... | [Ver] Find NDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| TC16: 1460B PDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 4thread 4core 2rxq
+| tc16-1460B-4t4c-ethip6lispip6-ip6base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 4 threads, 4 phy cores, 2 receive queues per NIC\
| | ... | port.
| | ... | [Ver] Find PDR for 1460 Byte frames using binary search start\
| | ... | at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${1460}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-| TC17: 9000B NDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 4thread 4core 2rxq
+| tc17-9000B-4t4c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 4 threads, 4 phy cores, 2 receive queues per NIC\
| | ... | port.
| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| TC18: 9000B PDR binary search - DUT IPv6 over LISPoIPv6 tunnel - 4thread 4core 2rxq
+| tc18-9000B-4t4c-ethip6lispip6-ip6base-pdrdisc
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
| | ... | filters config with 4 threads, 4 phy cores, 2 receive queues per NIC\
| | ... | port.
| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\
| | ... | at 10GE linerate, step 5kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6
-| | ... | SKIP_PATCH
+| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
| | ${framesize}= | Set Variable | ${9000}
| | ${min_rate}= | Set Variable | ${10000}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
Code Review / csit.git / blobdiff