# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/bridge_domain.robot
| Resource | resources/libraries/robot/performance.robot
-| Resource | resources/libraries/robot/counters.robot
-| Library | resources.libraries.python.TrafficGenerator
-| Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl
| Library | resources.libraries.python.NodePath
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_LONG
-| Suite Setup | 3-node Performance Suite Setup
+| Suite Setup | 3-node Performance Suite Setup | L2
| Suite Teardown | 3-node Performance Suite Teardown
| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword If Test Failed | Show statistics on all DUTs
-| Documentation | Throughput search suite (long running test suite based on RFC2544).
+| Test Teardown | Run Keyword | Show statistics on all DUTs
+| Documentation | *Throughput search suite (based on RFC2544).*
+| ...
+| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
+| ... | between nodes. Traffic profile contain 2 L2 streams (1 stream per
+| ... | direction). Packets contain Ethernet header, IPv4 header,
+| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are
+| ... | matching MAC addresses of the TG node.
*** Test Cases ***
-| Find NDR by using linear search and 64B frames through bridge domain in 3-node topology
-| | Given L2 bridge domain initialized in a 3-node circular topology
-| | Then Find NDR using linear search and pps | 64 | 4600000 | 100000
-| | ... | 3-node-bridge | 14000000 | 100000
+| Find NDR by using RFC2544 linear search and 64B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with non drop rate for 64B frames by using
+| | ... | linear search starting at 4.1Mpps, stepping down with step of 0.1Mpps
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
+| | ${framesize}= | Set Variable | 64
+| | ${start_rate}= | Set Variable | 4100000
+| | ${step_rate}= | Set Variable | 100000
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | 14880952
+| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
-*** Keywords ***
+| Find NDR by using RFC2544 linear search and 1518B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with non drop rate for 1518B frames by using
+| | ... | linear search starting at 812,743pps, stepping down with step of
+| | ... | 10,000pps
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
+| | ${framesize}= | Set Variable | 1518
+| | ${start_rate}= | Set Variable | 812743
+| | ${step_rate}= | Set Variable | 10000
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | 812743
+| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
-| 3-node Performance Suite Setup
-| | 3-node circular Topology Variables Setup
-| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
-| | ... | ${dut1} | ${dut1_if1} | ${dut1_if2}
-| | ... | ${dut2} | ${dut2_if1} | ${dut2_if2}
-| | ... | L2
+| Find NDR by using RFC2544 linear search and 9000B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with non drop rate for 9000B frames by using
+| | ... | linear search starting at 138,580pps, stepping down with step of
+| | ... | 5,000pps
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
+| | ${framesize}= | Set Variable | 9000
+| | ${start_rate}= | Set Variable | 138580
+| | ${step_rate}= | Set Variable | 5000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | 138580
+| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
-| 3-node Performance Suite Teardown
-| | Teardown traffic generator | ${tg}
+| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 64B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using
+| | ... | linear search starting at 8.2Mpps, stepping down with step of 0.1Mpps
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
+| | ${framesize}= | Set Variable | 64
+| | ${start_rate}= | Set Variable | 8200000
+| | ${step_rate}= | Set Variable | 100000
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | 14880952
+| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
-| L2 bridge domain initialized in a 3-node circular topology
-| | Vpp l2bd forwarding setup | ${dut1} | ${dut1_if1} | ${dut1_if2}
-| | Vpp l2bd forwarding setup | ${dut2} | ${dut2_if1} | ${dut2_if2}
-| | All Vpp Interfaces Ready Wait | ${nodes}
+| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 1518B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by
+| | ... | using linear search starting at 812,743pps, stepping down with step
+| | ... | of 10,000pps
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
+| | ${framesize}= | Set Variable | 1518
+| | ${start_rate}= | Set Variable | 812743
+| | ${step_rate}= | Set Variable | 10000
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | 812743
+| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
-| Find NDR using linear search and pps
-| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate}
-| | Set Duration | 60
-| | Set Search Rate Boundaries | 14000000 | 100000
-| | Set Search Linear Step | ${step_rate}
-| | Set Search Rate Type pps
-| | Linear Search | ${start_rate} | ${topology_type}
-| | ${result_rate}= | Verify Search Result
-| | Set Test Message | FINAL_RATE: ${result_rate} pps
+| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 9000B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by
+| | ... | using linear search starting at 138,580pps, stepping down with step
+| | ... | of 5,000pps
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
+| | ${framesize}= | Set Variable | 9000
+| | ${start_rate}= | Set Variable | 138580
+| | ${step_rate}= | Set Variable | 5000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | 138580
+| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
-| Show statistics on all DUTs
-| | Sleep | 10 | Waiting for statistics to be collected
-| | Vpp show stats | ${dut1}
-| | Vpp show stats | ${dut2}
+| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 64B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 64B
+| | ... | frames by using linear search starting at 9.8Mpps, stepping down
+| | ... | with step of 0.1Mpps
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
+| | ${framesize}= | Set Variable | 64
+| | ${start_rate}= | Set Variable | 9800000
+| | ${step_rate}= | Set Variable | 100000
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | 14880952
+| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
+
+| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 1518B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B
+| | ... | frames by using linear search starting at 812,743pps, stepping down
+| | ... | with step of 10,000pps
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
+| | ${framesize}= | Set Variable | 1518
+| | ${start_rate}= | Set Variable | 812743
+| | ${step_rate}= | Set Variable | 10000
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | 812743
+| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
+
+| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through bridge domain in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B
+| | ... | frames by using linear search starting at 138,580pps, stepping
+| | ... | down with step of 5,000pps
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
+| | ${framesize}= | Set Variable | 9000
+| | ${start_rate}= | Set Variable | 138580
+| | ${step_rate}= | Set Variable | 5000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | 138580
+| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
+| | AND L2 bridge domain initialized in a 3-node circular topology
+| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate}
+| | ... | ${step_rate} | 3-node-bridge
+| | ... | ${min_rate} | ${max_rate}
Code Review / csit.git / blobdiff