Update NDRCHK and PDRCHK rates

[csit.git] / tests / vpp / perf / ip4 / 10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot

diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot
index 5dc9417..b92c436 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot
@@ -60,17 +60,19 @@
 | | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
 | | ... | ref-NDR for 64 Byte frames using single trial throughput test
-| | ... | at 2x 4.1mpps.
+| | ... | at 2x 4.0mpps.
 | | [Tags] | 64B | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 4.1mpps
+| | ${rate}= | Set Variable | 4.0mpps
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
+| | And Add Fib Table | ${dut1} | 1
+| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
+| | And Add Fib Table | ${dut2} | 1
+| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
@@ -92,8 +94,10 @@
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
+| | And Add Fib Table | ${dut1} | 1
+| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
+| | And Add Fib Table | ${dut2} | 1
+| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
@@ -114,8 +118,10 @@
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
+| | And Add Fib Table | ${dut1} | 1
+| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
+| | And Add Fib Table | ${dut2} | 1
+| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
@@ -137,8 +143,10 @@
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
+| | And Add Fib Table | ${dut1} | 1
+| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
+| | And Add Fib Table | ${dut2} | 1
+| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
@@ -160,8 +168,10 @@
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
+| | And Add Fib Table | ${dut1} | 1
+| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
+| | And Add Fib Table | ${dut2} | 1
+| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
@@ -182,8 +192,10 @@
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
+| | And Add Fib Table | ${dut1} | 1
+| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
+| | And Add Fib Table | ${dut2} | 1
+| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
@@ -205,8 +217,10 @@
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
+| | And Add Fib Table | ${dut1} | 1
+| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
+| | And Add Fib Table | ${dut2} | 1
+| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
@@ -228,8 +242,10 @@
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
+| | And Add Fib Table | ${dut1} | 1
+| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
+| | And Add Fib Table | ${dut2} | 1
+| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
@@ -250,8 +266,10 @@
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv4 forwarding in 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local
+| | And Add Fib Table | ${dut1} | 1
+| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
+| | And Add Fib Table | ${dut2} | 1
+| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE}
 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable