| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
| | ... | ref-NDR for 64 Byte frames using single trial throughput test
-| | ... | at 2x 4.1mpps.
+| | ... | at 2x 4.0mpps.
| | [Tags] | 64B | 1T1C | STHREAD
| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 4.1mpps
+| | ${rate}= | Set Variable | 4.0mpps
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add PCI devices to DUTs in 3-node single link topology
| | And Add no multi seg to all DUTs
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
-| | ... | frames using single trial throughput test at 2x 10.4mpps.
+| | ... | frames using single trial throughput test at 2x 9.4mpps.
| | [Tags] | 64B | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 10.4mpps
+| | ${rate}= | Set Variable | 9.4mpps
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add PCI devices to DUTs in 3-node single link topology
| | And Add no multi seg to all DUTs
| | [Tags] | 64B | 2T2C | STHREAD
| | ...
| | [Template] | Check PDR for IPv4 routing
-| | framesize=${64} | rate=7.4mpps | wt=2 | rxq=1
+| | framesize=${64} | rate=9.4mpps | wt=2 | rxq=1
| tc05-1518B-2t2c-ethip4-ip4base-pdrchk
| | [Documentation]
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
-| | ... | frames using single trial throughput test at 2x 5.0mpps.
+| | ... | frames using single trial throughput test at 2x 4.4mpps.
| | [Tags] | 78B | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | ${78}
-| | ${rate}= | Set Variable | 5.0mpps
+| | ${rate}= | Set Variable | 4.4mpps
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add PCI devices to DUTs in 3-node single link topology
| | And Add no multi seg to all DUTs
| | [Documentation]
| | ... | [Cfg] DUT runs L2XC with 802.1ad config with 2 thread, 2 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
-| | ... | frames using single trial throughput test at 2x 8.5mpps.
+| | ... | frames using single trial throughput test at 2x 8.2mpps.
| | [Tags] | 64B | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 8.5mpps
+| | ${rate}= | Set Variable | 8.2mpps
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add PCI devices to DUTs in 3-node single link topology
| | And Add no multi seg to all DUTs
| | [Documentation]
| | ... | [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
-| | ... | frames using single trial throughput test at 2x 8.7mpps.
+| | ... | frames using single trial throughput test at 2x 8.1mpps.
| | [Tags] | 64B | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 8.7mpps
+| | ${rate}= | Set Variable | 8.1mpps
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add PCI devices to DUTs in 3-node single link topology
| | And Add no multi seg to all DUTs
| | [Documentation]
| | ... | [Cfg] DUT runs L2BD config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
-| | ... | frames using single trial throughput test at 2x 4.9mpps.
+| | ... | frames using single trial throughput test at 2x 4.0mpps.
| | [Tags] | 64B | 1T1C | STHREAD
| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 4.9mpps
+| | ${rate}= | Set Variable | 4.0mpps
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add PCI devices to DUTs in 3-node single link topology
| | And Add no multi seg to all DUTs
| | [Documentation]
| | ... | [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
-| | ... | frames using single trial throughput test at 2x 10.4mpps.
+| | ... | frames using single trial throughput test at 2x 9.4mpps.
| | [Tags] | 64B | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 10.4mpps
+| | ${rate}= | Set Variable | 9.4mpps
| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add PCI devices to DUTs in 3-node single link topology
| | And Add no multi seg to all DUTs
| | [Tags] | 64B | 1T1C | STHREAD
| | ...
| | [Template] | Check PDR for L2 bridge domain
-| | framesize=${64} | rate=4.9mpps | wt=1 | rxq=1
+| | framesize=${64} | rate=4.0mpps | wt=1 | rxq=1
| tc02-1518B-1t1c-eth-l2bdbasemaclrn-pdrchk
| | [Documentation]
| | [Tags] | 64B | 2T2C | MTHREAD
| | ...
| | [Template] | Check PDR for L2 bridge domain
-| | framesize=${64} | rate=10.4mpps | wt=2 | rxq=1
+| | framesize=${64} | rate=9.4mpps | wt=2 | rxq=1
| tc05-1518B-2t2c-eth-l2bdbasemaclrn-pdrchk
| | [Documentation]
| | [Documentation]
| | ... | [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
-| | ... | frames using single trial throughput test at 2x 5.9mpps.
+| | ... | frames using single trial throughput test at 2x 5.5mpps.
| | [Tags] | 64B | 1T1C | STHREAD
| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 5.9mpps
+| | ${rate}= | Set Variable | 5.5mpps
| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
| | And Add PCI devices to DUTs in 3-node single link topology
| | And Add no multi seg to all DUTs
| | [Tags] | 64B | 1T1C | STHREAD
| | ...
| | [Template] | Check PDR for L2 xconnect
-| | framesize=${64} | rate=5.9mpps | wt=1 | rxq=1
+| | framesize=${64} | rate=5.5mpps | wt=1 | rxq=1
| tc02-1518B-1t1c-eth-l2xcbase-pdrchk
| | [Documentation]