iSuite: cop.

Files: cop_whitelist_blacklist.robot, cop_whitelist_blacklist_IPv6.robot.
Updates test cases documentation.

Change-Id: I08a5cb0d64a0e02e72e0fbb3e59d8b9e34adde93
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

diff --git a/tests/suites/cop/cop_whitelist_blacklist.robot b/tests/suites/cop/cop_whitelist_blacklist.robot
index 24bde13..c83b5e1 100644 (file)
--- a/tests/suites/cop/cop_whitelist_blacklist.robot
+++ b/tests/suites/cop/cop_whitelist_blacklist.robot
@@ -27,13 +27,18 @@
 | ...         | AND          | Update All Interface Data On All Nodes | ${nodes}
 | Test Setup | Clear interface counters on all vpp nodes in topology | ${nodes}
 | Test Teardown | Show packet trace on all DUTs | ${nodes}
-| Documentation | *COP Blacklist and Whitelist Tests*
-| ... | COP tests use 3-node topology TG - DUT1 - DUT2 - TG with one
-| ... | link between nodes. DUT1 is configured with COP whitelist or
-| ... | blacklist on link to TG, DUT2 is configured with L2
-| ... | xconnect. Test packets are sent in one direction by TG on
-| ... | link to DUT1 and received on TG link to DUT2.  On receive TG
-| ... | verifies packet IP src-addr, dst-addr and MAC addresses.
+| Documentation | *COP Security IPv4 Blacklist and Whitelist Tests*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 on all links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
+| ... | static routes. COP security white-lists are applied on DUT1 ingress
+| ... | interface from TG. DUT2 is configured with L2XC.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in
+| ... | one direction by TG on link to DUT1; on receive TG verifies packets for
+| ... | correctness and drops as applicable.
+| ... | *[Ref] Applicable standard specifications:*
 
 *** Variables ***
 | ${tg_node}= | ${nodes['TG']}
@@ -57,13 +62,13 @@
 
 *** Test Cases ***
 | TC01: DUT permits IPv4 pkts with COP whitelist set with IPv4 src-addr
-| | [Documentation] | Eth-IPv4-ICMPv4 on links TG-DUT1, TG-DUT2, DUT1-DUT2: On
-| | ...             | DUT1 configure interface IPv4 addresses and routes in the
-| | ...             | main routing domain. Add COP whitelist with IPv4 src-addr
-| | ...             | matching packets generated by TG. On DUT2 configure L2
-| | ...             | xconnect. Make TG send ICMPv4 Echo Req on its interface to
-| | ...             | DUT1. Make TG verify received ICMPv4 Echo Replies are
-| | ...             | correct.
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 \
+| | ... | configure interface IPv4 addresses and routes in the main
+| | ... | routing domain, add COP whitelist on interface to TG with IPv4
+| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
+| | ... | xconnect. [Ver] Make TG send ICMPv4 Echo Req on its interface to
+| | ... | DUT1; verify received ICMPv4 Echo Req pkts are correct. [Ref]
 | | Given Path for 3-node testing is set
 | | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
 | | And Interfaces in 3-node path are up
@@ -89,15 +94,14 @@
 | | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
 | | ... | ${tg_to_dut2_mac}
 
-
 | TC02: DUT drops IPv4 pkts with COP blacklist set with IPv4 src-addr
-| | [Documentation] | Eth-IPv4-ICMPv4 on links TG-DUT1, TG-DUT2, DUT1-DUT2: On
-| | ...             | DUT1 configure interface IPv4 addresses and routes in the
-| | ...             | main routing domain. Add COP blacklist with IPv4 src-addr
-| | ...             | matching packets generated by TG. On DUT2 configure L2
-| | ...             | xconnect. Make TG send ICMPv4 Echo Req on its interface to
-| | ...             | DUT1. Make TG verify blacklisted ICMPv4 Echo Replies are
-| | ...             | dropped.
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 \
+| | ... | configure interface IPv4 addresses and routes in the main
+| | ... | routing domain, add COP blacklist on interface to TG with IPv4
+| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
+| | ... | xconnect. [Ver] Make TG send ICMPv4 Echo Req on its interface to
+| | ... | DUT1; verify no ICMPv4 Echo Req pkts are received. [Ref]
 | | Given Path for 3-node testing is set
 | | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
 | | And Interfaces in 3-node path are up

diff --git a/tests/suites/cop/cop_whitelist_blacklist_IPv6.robot b/tests/suites/cop/cop_whitelist_blacklist_IPv6.robot
index b2f6d31..054e376 100644 (file)
--- a/tests/suites/cop/cop_whitelist_blacklist_IPv6.robot
+++ b/tests/suites/cop/cop_whitelist_blacklist_IPv6.robot
@@ -27,13 +27,18 @@
 | ...         | AND          | Update All Interface Data On All Nodes | ${nodes}
 | Test Setup | Clear interface counters on all vpp nodes in topology | ${nodes}
 | Test Teardown | Show packet trace on all DUTs | ${nodes}
-| Documentation | *COP Blacklist and Whitelist Tests*
-| ... | COP tests use 3-node topology TG - DUT1 - DUT2 - TG with one
-| ... | link between nodes. DUT1 is configured with COP whitelist or
-| ... | blacklist on link to TG, DUT2 is configured with L2
-| ... | xconnect. Test packets are sent in one direction by TG on
-| ... | link to DUT1 and received on TG link to DUT2.  On receive TG
-| ... | verifies packet IP src-addr, dst-addr and MAC addresses.
+| Documentation | *COP Security IPv6 Blacklist and Whitelist Tests*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 on all links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and
+| ... | static routes. COP security white-lists are applied on DUT1 ingress
+| ... | interface from TG. DUT2 is configured with L2XC.
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in
+| ... | one direction by TG on link to DUT1; on receive TG verifies packets for
+| ... | correctness and drops as applicable.
+| ... | *[Ref] Applicable standard specifications:*
 
 *** Variables ***
 | ${tg_node}= | ${nodes['TG']}
@@ -60,14 +65,14 @@
 | ${fib_table_number}= | 1
 
 *** Test Cases ***
-| TC03: DUT permits IPv6 pkts with COP whitelist set with IPv6 src-addr
-| | [Documentation] | Eth-IPv6-ICMPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2: On
-| | ...             | DUT1 configure interface IPv6 addresses and routes in the
-| | ...             | main routing domain. Add COP whitelist with IPv6 src-addr
-| | ...             | matching packets generated by TG. On DUT2 configure L2
-| | ...             | xconnect. Make TG send ICMPv6 Echo Req on its interface to
-| | ...             | DUT1. Make TG verify received ICMPv6 Echo Replies are
-| | ...             | correct.
+| TC01: DUT permits IPv6 pkts with COP whitelist set with IPv6 src-addr
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 \
+| | ... | configure interface IPv6 addresses and routes in the main
+| | ... | routing domain, add COP whitelist on interface to TG with IPv6
+| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
+| | ... | xconnect. [Ver] Make TG send ICMPv6 Echo Req on its interface to
+| | ... | DUT1; verify received ICMPv6 Echo Req pkts are correct. [Ref]
 | | Given Path for 3-node testing is set
 | | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
 | | And Interfaces in 3-node path are up
@@ -98,14 +103,14 @@
 | | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
 | | ... | ${tg_to_dut2_mac}
 
-| TC04: DUT drops IPv6 pkts with COP blacklist set with IPv6 src-addr
-| | [Documentation] | Eth-IPv6-ICMPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2: On
-| | ...             | DUT1 configure interface IPv6 addresses and routes in the
-| | ...             | main routing domain. Add COP blacklist with IPv6 src-addr
-| | ...             | matching packets generated by TG. On DUT2 configure L2
-| | ...             | xconnect. Make TG send ICMPv6 Echo Req on its interface to
-| | ...             | DUT1. Make TG verify blacklisted ICMPv6 Echo Replies are
-| | ...             | dropped.
+| TC02: DUT drops IPv6 pkts with COP blacklist set with IPv6 src-addr
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 \
+| | ... | configure interface IPv6 addresses and routes in the main
+| | ... | routing domain, add COP blacklist on interface to TG with IPv6
+| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
+| | ... | xconnect. [Ver] Make TG send ICMPv6 Echo Req on its interface to
+| | ... | DUT1; verify no ICMPv6 Echo Req pkts are received. [Ref]
 | | Given Path for 3-node testing is set
 | | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
 | | And Interfaces in 3-node path are up