CSIT-237: VPN routed forwarding (VRF) - baseline for IPv6

Change-Id: I5c3053c692df29255a1da22a66f7ac282e3d5624
Signed-off-by: Zdeno Olsovsky <zolsovsk@cisco.com>

diff --git a/resources/libraries/python/InterfaceUtil.py b/resources/libraries/python/InterfaceUtil.py
index 9ecdb75..f5f1ce3 100644 (file)
--- a/resources/libraries/python/InterfaceUtil.py
+++ b/resources/libraries/python/InterfaceUtil.py
@@ -847,25 +847,30 @@ class InterfaceUtil(object):
                                                     interface_name=interface)
 
     @staticmethod
-    def assign_interface_to_fib_table(node, interface, table_id):
+    def assign_interface_to_fib_table(node, interface, table_id, ipv6=False):
         """Assign VPP interface to specific VRF/FIB table.
 
         :param node: VPP node where the FIB and interface are located.
         :param interface: Interface to be assigned to FIB.
         :param table_id: VRF table ID.
+        :param ipv6: Assign to IPv6 table. Default False.
         :type node: dict
         :type interface: str or int
         :type table_id: int
+        :type ipv6: bool
         """
         if isinstance(interface, basestring):
             sw_if_index = Topology.get_interface_sw_index(node, interface)
         else:
             sw_if_index = interface
 
+        ipv6 = 'ipv6' if ipv6 else ''
+
         with VatTerminal(node) as vat:
             vat.vat_terminal_exec_cmd_from_template("set_fib_to_interface.vat",
                                                     sw_index=sw_if_index,
-                                                    vrf=table_id)
+                                                    vrf=table_id,
+                                                    ipv6=ipv6)
 
     @staticmethod
     def set_linux_interface_mac(node, interface, mac, namespace=None):

diff --git a/resources/libraries/python/Routing.py b/resources/libraries/python/Routing.py
index 767fb3a..fbe7b60 100644 (file)
--- a/resources/libraries/python/Routing.py
+++ b/resources/libraries/python/Routing.py
@@ -24,7 +24,7 @@ class Routing(object):
     @staticmethod
     def vpp_route_add(node, network, prefix_len, gateway=None,
                       interface=None, use_sw_index=True, resolve_attempts=10,
-                      count=1, vrf=None):
+                      count=1, vrf=None, lookup_vrf=None):
         """Add route to the VPP node.
 
         :param node: Node to add route on.
@@ -37,6 +37,7 @@ class Routing(object):
         :param resolve_attempts: Resolve attempts IP route add parameter.
         :param count: number of IP addresses to add starting from network IP
         with same prefix (increment is 1). If None, then is not used.
+        :param lookup_vrf: VRF table ID for lookup.
         :type node: dict
         :type network: str
         :type prefix_len: int
@@ -46,6 +47,7 @@ class Routing(object):
         :type resolve_attempts: int
         :type count: int
         :type vrf: int
+        :type lookup_vrf: int
         """
         if use_sw_index:
             int_cmd = ('sw_if_index {}'.
@@ -63,6 +65,8 @@ class Routing(object):
 
         vrf = 'vrf {}'.format(vrf) if vrf else ''
 
+        lookup_vrf = 'lookup-in-vrf {}'.format(lookup_vrf) if lookup_vrf else ''
+
         with VatTerminal(node, json_param=False) as vat:
             vat.vat_terminal_exec_cmd_from_template('add_route.vat',
                                                     network=network,
@@ -71,7 +75,8 @@ class Routing(object):
                                                     vrf=vrf,
                                                     interface=int_cmd,
                                                     resolve_attempts=rap,
-                                                    count=cnt)
+                                                    count=cnt,
+                                                    lookup_vrf=lookup_vrf)
 
     @staticmethod
     def add_fib_table(node, network, prefix_len, fib_id, place):

diff --git a/resources/templates/vat/add_route.vat b/resources/templates/vat/add_route.vat
index 6c7dfb0..9fe8952 100644 (file)
--- a/resources/templates/vat/add_route.vat
+++ b/resources/templates/vat/add_route.vat
@@ -1 +1 @@
-ip_add_del_route {network}/{prefix_length} {via} {vrf} {interface} {resolve_attempts} {count}
+ip_add_del_route {network}/{prefix_length} {via} {vrf} {interface} {resolve_attempts} {count} {lookup_vrf}

diff --git a/resources/templates/vat/set_fib_to_interface.vat b/resources/templates/vat/set_fib_to_interface.vat
index f0850c9..09a97fa 100644 (file)
--- a/resources/templates/vat/set_fib_to_interface.vat
+++ b/resources/templates/vat/set_fib_to_interface.vat
@@ -1 +1 @@
-sw_interface_set_table sw_if_index {sw_index} vrf {vrf}
\ No newline at end of file
+sw_interface_set_table sw_if_index {sw_index} vrf {vrf} {ipv6}
\ No newline at end of file

diff --git a/resources/traffic_scripts/send_icmp_wait_for_reply.py b/resources/traffic_scripts/send_icmp_wait_for_reply.py
index 3c8b71a..a77f15e 100755 (executable)
--- a/resources/traffic_scripts/send_icmp_wait_for_reply.py
+++ b/resources/traffic_scripts/send_icmp_wait_for_reply.py
@@ -12,22 +12,33 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-"""Traffic script that sends an IP ICMPv4."""
+"""Traffic script that sends an IP ICMPv4 or ICMPv6."""
 
 import sys
+import ipaddress
 
 from scapy.layers.inet import ICMP, IP
+from scapy.layers.inet6 import IPv6, ICMPv6EchoRequest
 from scapy.all import Ether
 
 from resources.libraries.python.PacketVerifier import RxQueue, TxQueue
 from resources.libraries.python.TrafficScriptArg import TrafficScriptArg
 
 
-def is_icmp_reply(pkt):
+def is_icmp_reply(pkt, ipformat):
     """Return True if pkt is echo reply, else return False. If exception occurs
-    return False."""
+    return False.
+
+    :param pkt: Packet.
+    :param ipformat: Dictionary of names to distinguish IPv4 and IPv6.
+    :type pkt: dict
+    :type ipformat: dict
+    :rtype: bool
+    """
+    #pylint: disable=bare-except
     try:
-        if pkt['IP']['ICMP'].type == 0:  # 0 - echo-reply
+        if pkt[ipformat['IPType']][ipformat['ICMP_rep']].type == \
+                ipformat['Type']:
             return True
         else:
             return False
@@ -35,16 +46,59 @@ def is_icmp_reply(pkt):
         return False
 
 
-def address_check(request, reply):
+def address_check(request, reply, ipformat):
     """Compare request packet source address with reply destination address
-    and vice versa. If exception occurs return False."""
+    and vice versa. If exception occurs return False.
+
+    :param request: Sent packet containing request.
+    :param reply: Received packet containing reply.
+    :param ipformat: Dictionary of names to distinguish IPv4 and IPv6.
+    :type request: dict
+    :type reply: dict
+    :type ipformat: dict
+    :rtype: bool
+    """
+    #pylint: disable=bare-except
     try:
-        return reply['IP'].src == request['IP'].dst \
-               and reply['IP'].dst == request['IP'].src
+        r_src = reply[ipformat['IPType']].src == request[ipformat['IPType']].dst
+        r_dst = reply[ipformat['IPType']].dst == request[ipformat['IPType']].src
+        return r_src and r_dst
     except:
         return False
 
 
+def valid_ipv4(ip):
+    """Check if IP address has the correct IPv4 address format.
+
+    :param ip: IP address.
+    :type ip: str
+    :return: True in case of correct IPv4 address format,
+             otherwise return False.
+    :rtype: bool
+    """
+    try:
+        ipaddress.IPv4Address(unicode(ip))
+        return True
+    except (AttributeError, ipaddress.AddressValueError):
+        return False
+
+
+def valid_ipv6(ip):
+    """Check if IP address has the correct IPv6 address format.
+
+    :param ip: IP address.
+    :type ip: str
+    :return: True in case of correct IPv6 address format,
+             otherwise return False.
+    :rtype: bool
+    """
+    try:
+        ipaddress.IPv6Address(unicode(ip))
+        return True
+    except (AttributeError, ipaddress.AddressValueError):
+        return False
+
+
 def main():
     """Send ICMP echo request and wait for ICMP echo reply. It ignores all other
     packets."""
@@ -65,21 +119,33 @@ def main():
     sent_packets = []
 
     # Create empty ip ICMP packet
-    icmp_request = (Ether(src=src_mac, dst=dst_mac) /
-                    IP(src=src_ip, dst=dst_ip) /
-                    ICMP())
+    if valid_ipv4(src_ip) and valid_ipv4(dst_ip):
+        icmp_request = (Ether(src=src_mac, dst=dst_mac) /
+                        IP(src=src_ip, dst=dst_ip) /
+                        ICMP())
+        ip_format = {'IPType': 'IP', 'ICMP_req': 'ICMP',
+                     'ICMP_rep': 'ICMP', 'Type': 0}
+    elif valid_ipv6(src_ip) and valid_ipv6(dst_ip):
+        icmp_request = (Ether(src=src_mac, dst=dst_mac) /
+                        IPv6(src=src_ip, dst=dst_ip) /
+                        ICMPv6EchoRequest())
+        ip_format = {'IPType': 'IPv6', 'ICMP_req': 'ICMPv6 Echo Request',
+                     'ICMP_rep': 'ICMPv6 Echo Reply', 'Type': 129}
+    else:
+        raise ValueError("IP not in correct format")
+
     # Send created packet on the interface
     sent_packets.append(icmp_request)
     txq.send(icmp_request)
 
     for _ in range(1000):
-        icmp_reply = rxq.recv(wait_step)
+        icmp_reply = rxq.recv(wait_step, ignore=sent_packets)
         if icmp_reply is None:
             timeout -= wait_step
             if timeout < 0:
                 raise RuntimeError("ICMP echo Rx timeout")
-        elif is_icmp_reply(icmp_reply):
-            if address_check(icmp_request, icmp_reply):
+        elif is_icmp_reply(icmp_reply, ip_format):
+            if address_check(icmp_request, icmp_reply, ip_format):
                 break
     else:
         raise RuntimeError("Max packet count limit reached")

diff --git a/tests/func/vrf/vrf_tests.robot b/tests/func/vrf/vrf_tests.robot
index 239900c..7469613 100644 (file)
--- a/tests/func/vrf/vrf_tests.robot
+++ b/tests/func/vrf/vrf_tests.robot
@@ -25,7 +25,7 @@
 | Test Setup | Run Keywords | Setup all DUTs before test
 | ...        | AND          | Setup all TGs before traffic script
 | Test Teardown | Show Packet Trace on All DUTs | ${nodes}
-| Documentation | *Vpn routed forwarding - baseline*
+| Documentation | *Vpn routed forwarding - baseline IPv4*
 | ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node topology with two
 | ... | links in between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of

diff --git a/tests/func/vrf/vrf_tests_v6.robot b/tests/func/vrf/vrf_tests_v6.robot
new file mode 100644 (file)
index 0000000..b5dd18d
--- /dev/null
+++ b/tests/func/vrf/vrf_tests_v6.robot
@@ -0,0 +1,409 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/ipv4.robot
+| Resource | resources/libraries/robot/ipv6.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/traffic.robot
+| Resource | resources/libraries/robot/l2_traffic.robot
+| Library  | resources.libraries.python.Trace
+| Library  | resources.libraries.python.IPUtil
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO
+| Test Setup | Run Keywords | Setup all DUTs before test
+| ...        | AND          | Setup all TGs before traffic script
+| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| ...           | AND          | Show vpp trace dump on all DUTs
+| Documentation | *Vpn routed forwarding - baseline IPv6*
+| ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node topology with two
+| ... | links in between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6
+| ... | *[Cfg] DUT configuration:* Each DUT is configured with two VRF tables;
+| ... | Separation of traffic is tested by IP packets; Neighbors and Routes are
+| ... | set on DUT nodes; IP addresses are set on DUT interfaces.
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets
+| ... | are sent by TG on link to DUT1, DUT2 or back to TG; On receipt TG
+| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr,
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:*
+
+*** Variables ***
+| ${fib_table_1}= | 9
+| ${fib_table_2}= | 99
+
+| ${dut1_to_tg_ip1}= | 2001:62::3
+| ${dut1_to_tg_ip2}= | 2001:62::4
+| ${dut2_to_tg_ip1}= | 2003:62::3
+| ${dut2_to_tg_ip2}= | 2003:62::4
+
+| ${dut1_to_dut2_ip1}= | 2002:62::1
+| ${dut1_to_dut2_ip2}= | 2002:62::2
+| ${dut2_to_dut1_ip1}= | 2002:62::3
+| ${dut2_to_dut1_ip2}= | 2002:62::4
+
+| ${tg_dut1_ip1}= | 2001:62::1
+| ${tg_dut1_ip2}= | 2001:62::2
+| ${tg_dut2_ip1}= | 2003:62::1
+| ${tg_dut2_ip2}= | 2003:62::2
+
+| ${ip_prefix}= | 64
+| ${timeout}= | 5
+
+*** Test Cases ***
+| TC01: TG packets routed to DUT ingress interface, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->TG-if1 and from
+| | ... | TG->DUT1-if2 to DUT1->TG-if2 and checked if arrived.
+| | Given Path for Double-Link 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in Double-Link 3-node path are UP
+| | When Setup Env - 2xVRF Each Node
+| | Then Node replies to ICMP echo request | ${tg_node}
+| | ... | ${tg_to_dut1_if1} | ${dut1_to_tg_if1_mac}
+| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_ip1}
+| | ... | ${tg_dut1_ip1} | ${timeout}
+| | And Node replies to ICMP echo request | ${tg_node}
+| | ... | ${tg_to_dut1_if2} | ${dut1_to_tg_if2_mac}
+| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_ip2}
+| | ... | ${tg_dut1_ip2} | ${timeout}
+
+| TC02: TG packets routed to DUT egress interface, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->DUT2-if1 and from
+| | ... | TG->DUT1-if2 to DUT1->DUT2-if2 and checked if arrived.
+| | Given Path for Double-Link 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in Double-Link 3-node path are UP
+| | When Setup Env - 2xVRF Each Node
+| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip1} | ${timeout}
+| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip2} | ${timeout}
+
+| TC03: TG packets routed to DUT2 ingress interface through DUT1, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->DUT1-if1 and from
+| | ... | TG->DUT1-if2 to DUT2->DUT1-if2 and checked if arrived.
+| | Given Path for Double-Link 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in Double-Link 3-node path are UP
+| | When Setup Env - 2xVRF Each Node
+| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip1} | ${timeout}
+| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip2} | ${timeout}
+
+| TC04: TG packets routed to DUT2 egress interface through DUT1, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->TG-if1 and from
+| | ... | TG->DUT1-if2 to DUT2->TG-if2 and checked if arrived.
+| | Given Path for Double-Link 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in Double-Link 3-node path are UP
+| | When Setup Env - 2xVRF Each Node
+| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip1} | ${timeout}
+| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip2} | ${timeout}
+
+| TC05: TG packets routed to TG through DUT1 and DUT2, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to TG->DUT2-if1 and from
+| | ... | TG->DUT1-if2 to TG->DUT2-if2 and checked if arrived.
+| | Given Path for Double-Link 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in Double-Link 3-node path are UP
+| | When Setup Env - 2xVRF Each Node
+| | Then Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1}
+| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if1} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if1} | ${dut2_to_tg_if1_mac}
+| | ... | ${tg_to_dut2_if1_mac}
+| | And Send Packet And Check Headers | ${tg_node}
+| | ... | ${tg_dut1_ip2} | ${tg_dut2_ip2} | ${tg_to_dut1_if2}
+| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if2}
+| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac}
+
+| TC06: TG packets not routed to DUT ingress interface in different VRF, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->TG-if2 where it
+| | ... | should not arrive.
+| | [Tags] | SKIP_PATCH
+| | Given Path for Double-Link 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in Double-Link 3-node path are UP
+| | When Setup Env - 2xVRF Each Node
+| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Node replies to ICMP echo request
+| | ... | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut1_to_tg_ip2} | ${tg_dut1_ip1} | ${timeout}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Node replies to ICMP echo request
+| | ... | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut1_to_tg_ip1} | ${tg_dut1_ip2} | ${timeout}
+
+| TC07: TG packets not routed to DUT egress interface in different VRF, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->DUT2-if2 where it
+| | ... | should not arrive.
+| | [Tags] | SKIP_PATCH
+| | Given Path for Double-Link 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in Double-Link 3-node path are UP
+| | When Setup Env - 2xVRF Each Node
+| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Node replies to ICMP echo request
+| | ... | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip1} | ${timeout}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Node replies to ICMP echo request
+| | ... | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip2} | ${timeout}
+
+
+| TC08: TG packets not routed to DUT2 ingress interface in different VRF through DUT1, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->DUT1-if2 where it
+| | ... | should not arrive.
+| | [Tags] | SKIP_PATCH
+| | Given Path for Double-Link 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in Double-Link 3-node path are UP
+| | When Setup Env - 2xVRF Each Node
+| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Node replies to ICMP echo request
+| | ... | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip1} | ${timeout}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Node replies to ICMP echo request
+| | ... | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip2} | ${timeout}
+
+| TC09: TG packets not routed to DUT2 egress interface in different VRF through DUT1, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->TG-if2 where it
+| | ... | should not arrive.
+| | [Tags] | SKIP_PATCH
+| | Given Path for Double-Link 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in Double-Link 3-node path are UP
+| | When Setup Env - 2xVRF Each Node
+| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Node replies to ICMP echo request
+| | ... | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip1} | ${timeout}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Node replies to ICMP echo request
+| | ... | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip2} | ${timeout}
+
+| TC10: TG packets not routed to TG in different VRF through DUT1 and DUT2, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG.
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to TG->DUT2-if2 where it
+| | ... | should not arrive.
+| | [Tags] | SKIP_PATCH
+| | Given Path for Double-Link 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in Double-Link 3-node path are UP
+| | When Setup Env - 2xVRF Each Node
+| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1}
+| | ... | ${tg_dut2_ip2} | ${tg_to_dut1_if1}
+| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if2}
+| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip2}
+| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if2}
+| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if1}
+| | ... | ${dut2_to_tg_if1_mac} | ${tg_to_dut2_if1_mac}
+
+*** Keywords ***
+| Setup Env - 2xVRF Each Node
+| | [Documentation]
+| | ... | Environment is set up with 2 fib tables on each DUT. DUT1-TG-IF1 and \
+| | ... | DUT1-DUT2-IF1 are assigned to FIB1, and DUT1-TG-IF2 and DUT1-DUT2-IF2
+| | ... | are assigned to FIB2 (the same done on DUT2, just opposite).
+| | ... | IP addresses and IP Neighbors are subsequently set for interfaces.
+| | ... | The last setting is route for each fib table.
+| | ...
+| | ${dut1_if1_idx}= | Get Interface SW Index
+| | ... | ${dut1_node} | ${dut1_to_dut2_if1}
+| | ${dut1_if2_idx}= | Get Interface SW Index
+| | ... | ${dut1_node} | ${dut1_to_dut2_if2}
+| | ${dut2_if1_idx}= | Get Interface SW Index
+| | ... | ${dut2_node} | ${dut2_to_dut1_if1}
+| | ${dut2_if2_idx}= | Get Interface SW Index
+| | ... | ${dut2_node} | ${dut2_to_dut1_if2}
+
+| | Assign Interface To Fib Table
+| | ... | ${dut1_node} | ${dut1_to_dut2_if1} | ${fib_table_1} | ipv6=${TRUE}
+| | Assign Interface To Fib Table
+| | ... | ${dut1_node} | ${dut1_to_dut2_if2} | ${fib_table_2} | ipv6=${TRUE}
+| | Assign Interface To Fib Table
+| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${fib_table_1} | ipv6=${TRUE}
+| | Assign Interface To Fib Table
+| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${fib_table_2} | ipv6=${TRUE}
+
+| | Assign Interface To Fib Table
+| | ... | ${dut2_node} | ${dut2_to_dut1_if1} | ${fib_table_1} | ipv6=${TRUE}
+| | Assign Interface To Fib Table
+| | ... | ${dut2_node} | ${dut2_to_dut1_if2} | ${fib_table_2} | ipv6=${TRUE}
+| | Assign Interface To Fib Table
+| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${fib_table_1} | ipv6=${TRUE}
+| | Assign Interface To Fib Table
+| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${fib_table_2} | ipv6=${TRUE}
+
+| | And Set Interface Address
+| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${dut1_to_tg_ip1} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${dut1_to_tg_ip2} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut1_node} | ${dut1_to_dut2_if1}
+| | ... | ${dut1_to_dut2_ip1} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut1_node} | ${dut1_to_dut2_if2}
+| | ... | ${dut1_to_dut2_ip2} | ${ip_prefix}
+
+| | And Set Interface Address
+| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${dut2_to_tg_ip1} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${dut2_to_tg_ip2} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut2_node} | ${dut2_to_dut1_if1}
+| | ... | ${dut2_to_dut1_ip1} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut2_node} | ${dut2_to_dut1_if2}
+| | ... | ${dut2_to_dut1_ip2} | ${ip_prefix}
+
+| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_tg_if1}
+| | ... | ${tg_dut1_ip1} | ${tg_to_dut1_if1_mac} | vrf=${fib_table_1}
+| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2_if1}
+| | ... | ${dut2_to_dut1_ip1} | ${dut2_to_dut1_if1_mac} | vrf=${fib_table_1}
+| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_tg_if1}
+| | ... | ${tg_dut2_ip1} | ${tg_to_dut2_if1_mac} | vrf=${fib_table_1}
+| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1_if1}
+| | ... | ${dut1_to_dut2_ip1} | ${dut1_to_dut2_if1_mac} | vrf=${fib_table_1}
+
+| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_tg_if2}
+| | ... | ${tg_dut1_ip2} | ${tg_to_dut1_if2_mac} | vrf=${fib_table_2}
+| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2_if2}
+| | ... | ${dut2_to_dut1_ip2} | ${dut2_to_dut1_if2_mac} | vrf=${fib_table_2}
+| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_tg_if2}
+| | ... | ${tg_dut2_ip2} | ${tg_to_dut2_if2_mac} | vrf=${fib_table_2}
+| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1_if2}
+| | ... | ${dut1_to_dut2_ip2} | ${dut1_to_dut2_if2_mac} | vrf=${fib_table_2}
+
+| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip1} | ${ip_prefix}
+| | ... | ${dut2_to_dut1_ip1} | ${dut1_to_dut2_if1} | vrf=${fib_table_1}
+| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip1} | ${ip_prefix}
+| | ... | ${dut1_to_dut2_ip1} | ${dut2_to_dut1_if1} | vrf=${fib_table_1}
+
+| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip2} | ${ip_prefix}
+| | ... | ${dut2_to_dut1_ip2} | ${dut1_to_dut2_if2} | vrf=${fib_table_2}
+| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip2} | ${ip_prefix}
+| | ... | ${dut1_to_dut2_ip2} | ${dut2_to_dut1_if2} | vrf=${fib_table_2}