CSIT-251 IPv6 IPFIX - baseline tests 49/2449/11
authorselias <samelias@cisco.com>
Thu, 18 Aug 2016 09:08:17 +0000 (11:08 +0200)
committerJan Gelety <jgelety@cisco.com>
Thu, 25 Aug 2016 23:26:15 +0000 (23:26 +0000)
 - add support for IPv6 fields to IPFIX data class
 - add IPv6 IPFIX test suite

Change-Id: I8a0197c9e7dd91303feea11111c158698252a1eb
Signed-off-by: selias <samelias@cisco.com>
resources/libraries/python/IPFIXUtil.py
tests/func/ipfix/ipfix_ipv6.robot [new file with mode: 0644]

index f3247a8..750c4d6 100644 (file)
@@ -23,6 +23,7 @@ with IPFIX packets.
 from scapy.all import Packet, bind_layers
 from scapy.fields import *
 from scapy.layers.inet import UDP
+from scapy.layers.inet6 import IP6Field
 from scapy.contrib.ppi_geotag import UTCTimeField
 
 
@@ -37,11 +38,14 @@ class IPFIXHandler(object):
         8: IPField("IPv4_src", ""),
         11: ShortField("dst_port", 0),
         12: IPField("IPv4_dst", ""),
+        27: IP6Field("IPv6_src", "::"),
+        28: IP6Field("IPv6_dst", "::"),
         86: LongField("packetTotalCount", 0),
         180: ShortField("udp_src_port", 0),
         181: ShortField("udp_dst_port", 0),
         182: ShortField("tcp_src_port", 0),
         183: ShortField("tcp_dst_port", 0),
+        193: ByteField("Next_header", 0x00)
     }
 
     def __init__(self):
diff --git a/tests/func/ipfix/ipfix_ipv6.robot b/tests/func/ipfix/ipfix_ipv6.robot
new file mode 100644 (file)
index 0000000..288f45a
--- /dev/null
@@ -0,0 +1,201 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/ipv4.robot
+| Resource | resources/libraries/robot/ipfix.robot
+| Library | resources.libraries.python.Classify.Classify
+| Library | resources.libraries.python.IPFIXSetup
+| Library | resources.libraries.python.IPv6Setup
+| Library | resources.libraries.python.Trace
+
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING
+# TODO: Remove EXPECTED_FAILING tag once functionality is implemented (VPP-204)
+| Suite Setup | Run Keywords | Setup all TGs before traffic script
+| ...         | AND          | Update All Interface Data On All Nodes | ${nodes}
+| Test Setup | Setup all DUTs before test
+| Test Teardown | Run Keywords | Show packet trace on all DUTs | ${nodes}
+| ...           | AND          | Vpp Show Errors | ${nodes['DUT1']}
+| ...           | AND          | Show vpp trace dump on all DUTs
+| Documentation | *IPFIX ipv6 test cases*
+| ...
+| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with
+| ... | one link between the nodes. DUT1 is configured with IPv4 and IPV6
+| ... | routing and static routes. IPFIX is configured on DUT1 with
+| ... | DUT1->TG interface as collector.Test packets are
+| ... | sent from TG to or through DUT1. TG listens for flow report packets
+| ... | and verifies that they contains flow records of test packets sent.
+
+*** Variables ***
+| ${dut1_to_tg_ip}= | 10::10
+| ${dut2_to_dut1_ip}= | 11::10
+| ${tg_to_dut1_ip}= | 12::10
+| ${prefix_length}= | 64
+| ${ip_version}= | ip6
+| ${port}= | 80
+
+# IPv4 addresses used for IPFIX exporter. Export over IPv6 not (yet?) supported.
+| ${dut1_to_tg_ip4}= | 192.168.1.1
+| ${tg_to_dut1_ip4}= | 16.0.0.1
+
+*** Test Cases ***
+| TC01: DUT reports packet flow for traffic by source address
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
+| | ... | address as collector and add classify session with TG source address.
+| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
+| | ... | and data packets, verify that IPFIX reported the received packet.
+| | ... | [Ref] RFC 7011
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
+| | ... | ${tg_to_dut1_mac}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
+| | ... | ${tg_to_dut1_mac}
+| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
+| | And VPP configures classify session L3 | ${dut1_node} | permit
+| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
+| | ... | ${tg_to_dut1_ip}
+| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${table_index} | ip_version=${ip_version}
+| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
+| | ... | ${dut1_to_tg_ip4} | interval=5
+| | And Set IPFIX stream | ${dut1_node} | ${1}
+| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
+| | ... | ${ip_version}
+| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
+
+| TC02: DUT reports packet flow for traffic with local destination address
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
+| | ... | address as collector and add classify session with destination
+| | ... | address of DUT1.
+| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
+| | ... | and data packets, verify that IPFIX reported the received packet.
+| | ... | [Ref] RFC 7011
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
+| | ... | ${tg_to_dut1_mac}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
+| | ... | ${tg_to_dut1_mac}
+| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst
+| | And VPP configures classify session L3 | ${dut1_node} | permit
+| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst
+| | ... | ${dut1_to_tg_ip}
+| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${table_index} | ip_version=${ip_version}
+| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
+| | ... | ${dut1_to_tg_ip4} | interval=5
+| | And Set IPFIX stream | ${dut1_node} | ${1}
+| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
+| | ... | ${ip_version}
+| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
+
+| TC03: DUT reports packet flow for traffic with remote destination address
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
+| | ... | address as collector and add classify session with destination
+| | ... | address of DUT2.
+| | ... | [Ver] Make TG send a packet to DUT2 through DUT1, then listen
+| | ... | for IPFIX template and data packets, verify that IPFIX reported
+| | ... | the received packet.
+| | ... | [Ref] RFC 7011
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
+| | ... | ${tg_to_dut1_mac}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
+| | ... | ${tg_to_dut1_mac}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip}
+| | ... | ${dut2_to_dut1_mac}
+| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst
+| | And VPP configures classify session L3 | ${dut1_node} | permit
+| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst
+| | ... | ${dut2_to_dut1_ip}
+| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${table_index} | ip_version=${ip_version}
+| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
+| | ... | ${dut1_to_tg_ip4} | interval=5
+| | And Set IPFIX stream | ${dut1_node} | ${1}
+| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
+| | ... | ${ip_version}
+| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip}
+| | ... | ${dut2_to_dut1_ip}
+
+| TC04: DUT reports packet flow for traffic by source and destination port
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
+| | ... | address as collector and add classify session with TG source address
+| | ... | and source and destination ports.
+| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
+| | ... | and data packets, verify that IPFIX reported the received packet.
+| | ... | [Ref] RFC 7011
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
+| | ... | ${tg_to_dut1_mac}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
+| | ... | ${tg_to_dut1_mac}
+| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
+| | ... | src proto l4 src_port dst_port
+| | And VPP configures classify session generic | ${dut1_node}
+| | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
+| | ... | l3 ${ip_version} src ${tg_to_dut1_ip}
+| | ... | proto 6 l4 src_port ${port} dst_port ${port}
+| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${table_index} | ip_version=${ip_version}
+| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
+| | ... | ${dut1_to_tg_ip4} | interval=5
+| | And Set IPFIX stream | ${dut1_node} | ${1}
+| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
+| | ... | ${ip_version}
+| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
+| | ... | port=${port}
+
+# TODO: DUT reports packet flow when ACL is configured with wildcards

©2016 FD.io a Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation. Linux is a registered trademark of Linus Torvalds.
Please see our privacy policy and terms of use.