summary |
shortlog |
log |
commit | commitdiff |
review |
tree
raw |
patch |
inline | side by side (from parent 1:
06fd5a9)
Failures might be related to:
https://gerrit.fd.io/r/#/c/12643/
Change-Id: I0c60d51e27508f937a4b2d6c6b5e6f0703f793ab
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
| | [Documentation] | Check if Honeycomb API can configure interface\
| | ... | vrf ID.
| | ...
| | [Documentation] | Check if Honeycomb API can configure interface\
| | ... | vrf ID.
| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | [Teardown] | Honeycomb sets interface VRF ID
| | ... | ${node} | ${interface} | ${0} | ipv4
| | ...
| | [Teardown] | Honeycomb sets interface VRF ID
| | ... | ${node} | ${interface} | ${0} | ipv4
| | ...
| | ... | [Ver] Send ICMP packet from first TG interface to configured route
| | ... | destination. Receive packet on the second TG interface.
| | ...
| | ... | [Ver] Send ICMP packet from first TG interface to configured route
| | ... | destination. Receive packet on the second TG interface.
| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | ${table}= | Set Variable | table1
| | Given Setup interfaces and neighbors for IPv4 routing test
| | When Honeycomb configures routing table
| | ${table}= | Set Variable | table1
| | Given Setup interfaces and neighbors for IPv4 routing test
| | When Honeycomb configures routing table
| | ... | verify that each destination MAC was used by exactly 50 packets.
| | ... | Receive packet on the second TG interface.
| | ...
| | ... | verify that each destination MAC was used by exactly 50 packets.
| | ... | Receive packet on the second TG interface.
| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | ${table}= | Set Variable | table2
| | Given Setup interfaces and neighbors for IPv4 routing test
| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${next_hop1} | ${next_hop_mac1}
| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${next_hop2} | ${next_hop_mac2}
| | ${table}= | Set Variable | table2
| | Given Setup interfaces and neighbors for IPv4 routing test
| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${next_hop1} | ${next_hop_mac1}
| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${next_hop2} | ${next_hop_mac2}
+| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | When Honeycomb configures routing table
| | ... | ${node} | table2 | ipv4 | ${table2} | ${1}
| | Then Routing data from Honeycomb should contain
| | When Honeycomb configures routing table
| | ... | ${node} | table2 | ipv4 | ${table2} | ${1}
| | Then Routing data from Honeycomb should contain
| | ... | destination. Make sure no packet is received on the second TG\
| | ... | interface.
| | ...
| | ... | destination. Make sure no packet is received on the second TG\
| | ... | interface.
| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | ${table}= | Set Variable | table3
| | Given Setup interfaces and neighbors for IPv4 routing test
| | When Honeycomb configures routing table
| | ${table}= | Set Variable | table3
| | Given Setup interfaces and neighbors for IPv4 routing test
| | When Honeycomb configures routing table
| | ... | [Ver] Send ICMP packet from first TG interface to configured route
| | ... | destination. Receive packet on the second TG interface.
| | ...
| | ... | [Ver] Send ICMP packet from first TG interface to configured route
| | ... | destination. Receive packet on the second TG interface.
| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | ${table}= | Set Variable | table4
| | Given Setup interfaces and neighbors for IPv6 routing test
| | When Honeycomb configures routing table
| | ${table}= | Set Variable | table4
| | Given Setup interfaces and neighbors for IPv6 routing test
| | When Honeycomb configures routing table
| | ... | verify that each destination MAC was used by exactly 50 packets.
| | ... | Receive packet on the second TG interface.
| | ...
| | ... | verify that each destination MAC was used by exactly 50 packets.
| | ... | Receive packet on the second TG interface.
| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | ${table}= | Set Variable | table5
| | Given Setup interfaces and neighbors for IPv6 routing test
| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ${table}= | Set Variable | table5
| | Given Setup interfaces and neighbors for IPv6 routing test
| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}