summary |
shortlog |
log |
commit | commitdiff |
review |
tree
raw |
patch |
inline | side by side (from parent 1:
6e42b78)
Signed-off-by: Viliam Luc <vluc@cisco.com>
Change-Id: Ib0a853f7bd8cdbb0dee747e4f601bc4e54d006e9
| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
| ... | encrypt it and send to another DUT, where packets are decrypted and \
| ... | sent back to TG.
| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
| ... | encrypt it and send to another DUT, where packets are decrypted and \
| ... | sent back to TG.
-| ... | sent back to TG.
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
|
| Documentation | **RFC4301: SPD lookup performance**
| ... |
|
| Documentation | **RFC4301: SPD lookup performance**
| ... |
-| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
| ... |
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
| ... |
| ... |
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.
| ... |
-| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, two
-| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
-| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
-| ... | outbound traffic is matched and only the last rule is the matching
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \
+| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \
+| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \
+| ... | outbound traffic is matched and only the last rule is the matching \
| ... | rule. DUT1 tested with ${nic_name}.
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | rule. DUT1 tested with ${nic_name}.
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | expressed in percentage of packets transmitted. NDR and PDR are \
| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
| ... | library.
| ... | expressed in percentage of packets transmitted. NDR and PDR are \
| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
| ... | library.
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
-| ... | the lowest priority rule matching the traffic. The action of the
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header \
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \
+| ... | the lowest priority rule matching the traffic. The action of the \
| ... | matching rule is BYPASS. No encryption or authentication is done.
| ... |
| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
| ... | matching rule is BYPASS. No encryption or authentication is done.
| ... |
| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544.
| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
| ... | encrypt it and send to another DUT, where packets are decrypted and \
| ... | sent back to TG.
| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
| ... | encrypt it and send to another DUT, where packets are decrypted and \
| ... | sent back to TG.
-| ... | sent back to TG.
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
| ... | encrypt it and send to another DUT, where packets are decrypted and \
| ... | sent back to TG.
| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
| ... | encrypt it and send to another DUT, where packets are decrypted and \
| ... | sent back to TG.
-| ... | sent back to TG.
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
*** Keywords ***
| Local Template
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
| | ... | - **[Cfg]** DUT runs IPv4 routing config. \
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
*** Keywords ***
| Local Template
| | [Documentation]
*** Keywords ***
| Local Template
| | [Documentation]
-| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores} \
-| | ... | physical core(s) for worker threads.
+| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
| |
| | ... | *Arguments:*
| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
| |
| | ... | *Arguments:*
| | [Documentation]
| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 \
| | ... | routing and static route, SR policy and steering policy for one \
| | [Documentation]
| | ... | - **[Cfg]** DUT1 and DUT2 are configured with IPv6 \
| | ... | routing and static route, SR policy and steering policy for one \
-| | ... | direction and two SR behaviours (functions) - End and End.DX6 - for \
-| | ... | other direction.
+| | ... | direction and two SR behaviours (functions) - End and End. DX6 - for \
+| | ... | other direction. \
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
| |
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
| |
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.
| ... |
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \
| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.
| ... |
-| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
| ... | bridge-\
| ... | domain and MAC learning enabled. Qemu VNFs are \
| ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
| ... | bridge-\
| ... | domain and MAC learning enabled. Qemu VNFs are \
| ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
| ... |
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
| ... |
| ... |
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
| ... |
-| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
| ... | bridge-domain and MAC learning enabled. Qemu VNFs are \
| ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
| ... | bridge-domain and MAC learning enabled. Qemu VNFs are \
| ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \