Split container sections in report 83/8983/3
authorPeter Mikus <pmikus@cisco.com>
Tue, 24 Oct 2017 08:37:11 +0000 (10:37 +0200)
committerPeter Mikus <pmikus@cisco.com>
Tue, 24 Oct 2017 08:55:42 +0000 (08:55 +0000)
- Split Container Memif section and Container Orchestrated section
- Fix naming conventions

Change-Id: Icb8d0c92ad08f87b998aa20291eeae9958c36e43
Signed-off-by: Peter Mikus <pmikus@cisco.com>
13 files changed:
docs/report/vpp_performance_tests/containers.rst
docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst [new file with mode: 0644]
docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst [new file with mode: 0644]
docs/report/vpp_performance_tests/packet_latency_graphs/index.rst
docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst [new file with mode: 0644]
docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst [new file with mode: 0644]
docs/report/vpp_performance_tests/packet_throughput_graphs/index.rst
resources/templates/kubernetes/eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc.yaml [moved from resources/templates/kubernetes/eth-1drcl2bdbase-eth-2memif-1drcl2xc.yaml with 100% similarity]
resources/templates/kubernetes/eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc.yaml [moved from resources/templates/kubernetes/eth-1drcl2bdbase-eth-4memif-2drcl2xc.yaml with 100% similarity]
tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot [moved from tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbase-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot with 90% similarity]
tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot [moved from tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot with 90% similarity]
tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot
tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot

index 8fd0320..d3eeb71 100644 (file)
@@ -535,10 +535,10 @@ Following container networking topologies are tested in CSIT |release|:
 
 - Kubernetes/Ligato topologies:
 
-  - eth-l2xcbase-eth-2memif-1vnf.
-  - eth-l2xcbase-eth-4memif-2vnf.
-  - eth-l2bdbasemaclrn-eth-2memif-1vnf.
-  - eth-l2bdbasemaclrn-eth-4memif-2vnf.
+  - eth-1drcl2xcbase-eth-2memif-1drcl2xc.
+  - eth-1drcl2xcbase-eth-4memif-2drcl2xc.
+  - eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc.
+  - eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc.
 
 
 References
diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst
new file mode 100644 (file)
index 0000000..3ac7da6
--- /dev/null
@@ -0,0 +1,74 @@
+Container memif Connections
+===========================
+
+This section includes summary graphs of VPP Phy-to-Phy packet latency
+with Container memif Connections measured at 50% of discovered NDR throughput
+rate. Latency is reported for VPP running in multiple configurations of
+VPP worker thread(s), a.k.a. VPP data plane thread(s), and their
+physical CPU core(s) placement.
+
+VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph below.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-container_memif-ndrdisc-lat50.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-container_memif-ndrdisc-lat50}
+            \label{fig:64B-1t1c-container_memif-ndrdisc-lat50}
+    \end{figure}
+
+*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/container_memif
+      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+
+VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-container_memif-ndrdisc-lat50.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-container_memif-ndrdisc-lat50}
+            \label{fig:64B-2t2c-container_memif-ndrdisc-lat50}
+    \end{figure}
+
+*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/container_memif
+      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst
new file mode 100644 (file)
index 0000000..fd3cd34
--- /dev/null
@@ -0,0 +1,74 @@
+Container Orchestrated Topologies
+=================================
+
+This section includes summary graphs of VPP Phy-to-Phy packet latency
+with CContainer Orchestrated Topologies measured at 50% of discovered NDR
+throughput rate. Latency is reported for VPP running in multiple configurations
+of VPP worker thread(s), a.k.a. VPP data plane thread(s), and their
+physical CPU core(s) placement.
+
+VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph below.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-container_orchestrated-ndrdisc-lat50.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-container_orchestrated-ndrdisc-lat50}
+            \label{fig:64B-1t1c-container_orchestrated-ndrdisc-lat50}
+    \end{figure}
+
+*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/kubernetes/perf/container_memif
+      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+
+VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-container_orchestrated-ndrdisc-lat50.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-container_orchestrated-ndrdisc-lat50}
+            \label{fig:64B-2t2c-container_orchestrated-ndrdisc-lat50}
+    \end{figure}
+
+*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/kubernetes/perf/container_memif
+      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
index 7db10ee..c42b4c9 100644 (file)
@@ -30,4 +30,6 @@ TGint2-to-SUT2-to-SUT1-to-TGint1.
     ip4_tunnels
     ip6_tunnels
     vm_vhost
+    container_memif
+    container_orchestrated
     ipsec
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst
new file mode 100644 (file)
index 0000000..8c26762
--- /dev/null
@@ -0,0 +1,151 @@
+Container memif Connections
+===========================
+
+Following sections include summary graphs of VPP Phy-to-Phy performance
+with Container memif Connections, including NDR throughput (zero packet loss)
+and PDR throughput (<0.5% packet loss). Performance is reported for VPP
+running in multiple configurations of VPP worker thread(s), a.k.a. VPP
+data plane thread(s), and their physical CPU core(s) placement.
+
+NDR Throughput
+~~~~~~~~~~~~~~
+
+VPP NDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
+in the graph below.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-container_memif-ndrdisc.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-container_memif-ndrdisc}
+            \label{fig:64B-1t1c-container_memif-ndrdisc}
+    \end{figure}
+
+*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/container_memif
+      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+
+VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
+in the graph below.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-container_memif-ndrdisc.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-container_memif-ndrdisc}
+            \label{fig:64B-2t2c-container_memif-ndrdisc}
+    \end{figure}
+
+*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/container_memif
+      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+
+
+PDR Throughput
+~~~~~~~~~~~~~~
+
+VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
+in the graph below. PDR measured for 0.5% packet loss ratio.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-container_memif-pdrdisc.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-container_memif-pdrdisc}
+            \label{fig:64B-1t1c-container_memif-pdrdisc}
+    \end{figure}
+
+*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/container_memif
+      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+
+VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
+in the graph below. PDR measured for 0.5% packet loss ratio.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-container_memif-pdrdisc.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-container_memif-pdrdisc}
+            \label{fig:64B-2t2c-container_memif-pdrdisc}
+    \end{figure}
+
+*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/container_memif
+      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst
new file mode 100644 (file)
index 0000000..f9601c0
--- /dev/null
@@ -0,0 +1,151 @@
+Container Orchestrated Topologies
+=================================
+
+Following sections include summary graphs of VPP Phy-to-Phy performance
+with Container Orchestrated Topologies, including NDR throughput (zero packet
+loss) and PDR throughput (<0.5% packet loss). Performance is reported for VPP
+running in multiple configurations of VPP worker thread(s), a.k.a. VPP
+data plane thread(s), and their physical CPU core(s) placement.
+
+NDR Throughput
+~~~~~~~~~~~~~~
+
+VPP NDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
+in the graph below.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-container_orchestrated-ndrdisc.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-container_orchestrated-ndrdisc}
+            \label{fig:64B-1t1c-container_orchestrated-ndrdisc}
+    \end{figure}
+
+*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/kubernetes/perf/container_memif
+      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+
+VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
+in the graph below.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-container_orchestrated-ndrdisc.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-container_orchestrated-ndrdisc}
+            \label{fig:64B-2t2c-container_orchestrated-ndrdisc}
+    \end{figure}
+
+*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/kubernetes/perf/container_memif
+      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+
+
+PDR Throughput
+~~~~~~~~~~~~~~
+
+VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
+in the graph below. PDR measured for 0.5% packet loss ratio.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-container_orchestrated-pdrdisc.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-container_orchestrated-pdrdisc}
+            \label{fig:64B-1t1c-container_orchestrated-pdrdisc}
+    \end{figure}
+
+*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/kubernetes/perf/container_memif
+      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+
+VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
+in the graph below. PDR measured for 0.5% packet loss ratio.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-container_orchestrated-pdrdisc.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-container_orchestrated-pdrdisc}
+            \label{fig:64B-2t2c-container_orchestrated-pdrdisc}
+    \end{figure}
+
+*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set -x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/kubernetes/perf/container_memif
+      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
index 91191ef..7c2a1a9 100644 (file)
@@ -42,4 +42,6 @@ and their indices.
     ip4_tunnels
     ip6_tunnels
     vm_vhost
+    container_memif
+    container_orchestrated
     ipsec
@@ -62,7 +62,7 @@
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
 # Kubernetes profile
-| ${kubernetes_profile} | eth-1drcl2bdbase-eth-2memif-1drcl2xc
+| ${kubernetes_profile} | eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc
 # Traffic profile:
 | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
 # CPU settings
 | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 *** Test Cases ***
-| tc01-64B-1t1c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc02-64B-1t1c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 100kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc03-IMIX-1t1c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc04-IMIX-1t1c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc05-1518B-1t1c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc06-1518B-1t1c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc07-64B-2t2c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc08-64B-2t2c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 100kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC
+| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
 
-| tc09-IMIX-2t2c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc10-IMIX-2t2c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC
+| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
 
-| tc11-1518B-2t2c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc12-1518B-2t2c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC
+| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
@@ -62,7 +62,7 @@
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
 # Kubernetes profile
-| ${kubernetes_profile} | eth-1drcl2bdbase-eth-4memif-2drcl2xc
+| ${kubernetes_profile} | eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc
 # Traffic profile:
 | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
 # CPU settings
 | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 *** Test Cases ***
-| tc01-64B-1t1c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc02-64B-1t1c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 100kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc03-IMIX-1t1c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc04-IMIX-1t1c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc05-1518B-1t1c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc06-1518B-1t1c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc07-64B-2t2c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc08-64B-2t2c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 100kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC
+| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
 
-| tc09-IMIX-2t2c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc10-IMIX-2t2c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC
+| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
 
-| tc11-1518B-2t2c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc12-1518B-2t2c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC
+| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
index a0178da..038cb16 100644 (file)
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 100kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
 
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 100kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC
+| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
 
 | | ... | linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC
+| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
 
 | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC
+| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
index 8cdea90..e10d21c 100644 (file)
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 100kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
 
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 100kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC
+| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
 
 | | ... | linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC
+| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
 
 | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC
+| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR

©2016 FD.io a Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation. Linux is a registered trademark of Linus Torvalds.
Please see our privacy policy and terms of use.