# TODO CSIT-1481: Crypto HW should be read from topology file instead.
NIC_NAME_TO_CRYPTO_HW = {
u"Intel-X553": u"HW_C3xxx",
+ u"Intel-E822CQ": u"HW_C4xxx",
u"Intel-X710": u"HW_DH895xcc",
u"Intel-XL710": u"HW_DH895xcc",
}
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
initialize or remove VFs on QAT.
:param node: DUT node.
- :crypto_type: Crypto device type - HW_DH895xcc or HW_C3xxx.
+ :crypto_type: Crypto device type - HW_DH895xcc, HW_C3xxx or HW_C4xxx.
:param numvfs: Number of VFs to initialize, 0 - disable the VFs.
:param force_init: If True then try to initialize to specific value.
:type node: dict
"""Init Crypto QAT device virtual functions on DUT.
:param node: DUT node.
- :crypto_type: Crypto device type - HW_DH895xcc or HW_C3xxx.
+ :crypto_type: Crypto device type - HW_DH895xcc, HW_C3xxx or HW_C4xxx.
:param numvfs: Number of VFs to initialize, 0 - disable the VFs.
:type node: dict
:type crypto_type: string
elif crypto_type == u"HW_C3xxx":
kernel_mod = u"qat_c3xxx"
kernel_drv = u"c3xxx"
+ elif crypto_type == u"HW_C4xxx":
+ kernel_mod = u"qat_c4xxx"
+ kernel_drv = u"c4xxx"
else:
raise RuntimeError(
f"Unsupported crypto device type on {node[u'host']}"
| | ${version} = | Get iPerf Version | ${nodes}[TG]
| | Export TG Type And Version | ${type} | ${version}
-| Additional Suite Setup Action For ipsechw
+| Additional Suite Setup Action For cryptohw
| | [Documentation]
| | ... | Additional Setup for suites which uses QAT HW.
| |
| | ${numvfs}= | Set Variable If
| | ... | '${crypto_type}' == 'HW_DH895xcc' | ${32}
| | ... | '${crypto_type}' == 'HW_C3xxx' | ${16}
+| | ... | '${crypto_type}' == 'HW_C4xxx' | ${128}
| | Configure crypto device on all DUTs | ${crypto_type} | numvfs=${numvfs}
| | ... | force_init=${True}
| | Configure kernel module on all DUTs | vfio_pci | force_load=${True}
| | ... | interface=${DUT1_${int}1}[0]
| | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | gateway=${tg_if2_ip4}
| | ... | interface=${DUT2_${int}2}[0]
+
+| VPP Enable Wireguard Async Mode on all VPP DUTs
+| | [Documentation]
+| | ... | Enable wireguard async mode on all DUT nodes.
+| |
+| | FOR | ${dut} | IN | @{duts}
+| | | VPP Wireguard Set Async Mode | ${nodes['${dut}']}
+| | END
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlhw-ip4base-int-aes128gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlhw-ip4base-int-aes256gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_all
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Copyright (c) 2021 Intel and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
+# Copyright (c) 2022 Intel and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Copyright (c) 2021 Intel and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
+# Copyright (c) 2022 Intel and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Copyright (c) 2021 Intel and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
+# Copyright (c) 2022 Intel and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_all
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlhw-ip4base-int-aes128gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlhw-ip4base-int-aes256gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlhw-ip4base-policy-aes256gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_all
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Copyright (c) 2021 Intel and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
+# Copyright (c) 2022 Intel and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Copyright (c) 2021 Intel and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
+# Copyright (c) 2022 Intel and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Copyright (c) 2021 Intel and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
+# Copyright (c) 2022 Intel and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_all
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Copyright (c) 2021 Intel and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
+# Copyright (c) 2022 Intel and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Copyright (c) 2021 Intel and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
+# Copyright (c) 2022 Intel and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Copyright (c) 2021 Intel and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
+# Copyright (c) 2022 Intel and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir
|
-| Suite Setup | Setup suite topology interfaces | performance | ipsechw
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | ipsec_sa
--- /dev/null
+# Copyright (c) 2022 Intel and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/wireguard/wireguard.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
+| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | ASYNC | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4udpwireguard1000tnlhwasync-ip4base
+|
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | and send to another DUT, where packets are decrypted and sent back \
+| ... | to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of WireGuard tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.src and IP.dst \
+| ... | are applied to both streams.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
+
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
+| ... | wireguard_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | HW_DH895xcc
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${60}
+| ${tg_if1_ip4}= | 192.168.10.2
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 200.0.0.1
+| ${dut2_if1_ip4}= | 200.0.0.2
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.2
+| ${wg_if1_ip4}= | 1.0.0.1
+| ${wg_if2_ip4}= | 1.0.0.2
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${n_tunnels}= | ${1000}
+| ${listen_port}= | ${51820}
+| ${keepalive_time}= | ${256}
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP Enable Wireguard Async Mode on all VPP DUTs
+| | And Initialize WireGuard in 3-node circular topology
+| | And VPP WireGuard Create Tunnel Interfaces On DUTs
+| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0]
+| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0]
+| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4}
+| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time}
+| | ... | ${laddr_ip4} | ${raddr_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4udpwireguard1000tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4udpwireguard1000tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4udpwireguard1000tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4udpwireguard1000tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udpwireguard1000tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udpwireguard1000tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udpwireguard1000tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udpwireguard1000tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udpwireguard1000tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4udpwireguard1000tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4udpwireguard1000tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4udpwireguard1000tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2022 Intel and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/wireguard/wireguard.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_100
+| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | ASYNC | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4udpwireguard100tnlhwasync-ip4base
+|
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | and send to another DUT, where packets are decrypted and sent back \
+| ... | to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of WireGuard tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.src and IP.dst \
+| ... | are applied to both streams.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
+
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
+| ... | wireguard_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | HW_DH895xcc
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${60}
+| ${tg_if1_ip4}= | 192.168.10.2
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 200.0.0.1
+| ${dut2_if1_ip4}= | 200.0.0.2
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.2
+| ${wg_if1_ip4}= | 1.0.0.1
+| ${wg_if2_ip4}= | 1.0.0.2
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${n_tunnels}= | ${100}
+| ${listen_port}= | ${51820}
+| ${keepalive_time}= | ${256}
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP Enable Wireguard Async Mode on all VPP DUTs
+| | And Initialize WireGuard in 3-node circular topology
+| | And VPP WireGuard Create Tunnel Interfaces On DUTs
+| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0]
+| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0]
+| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4}
+| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time}
+| | ... | ${laddr_ip4} | ${raddr_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4udpwireguard100tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4udpwireguard100tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4udpwireguard100tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4udpwireguard100tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udpwireguard100tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udpwireguard100tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udpwireguard100tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udpwireguard100tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udpwireguard100tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4udpwireguard100tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4udpwireguard100tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4udpwireguard100tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2022 Intel and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/wireguard/wireguard.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
+| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | ASYNC | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4udpwireguard1tnlhwasync-ip4base
+|
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | and send to another DUT, where packets are decrypted and sent back \
+| ... | to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of WireGuard tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.src and IP.dst \
+| ... | are applied to both streams.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
+
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
+| ... | wireguard_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | HW_DH895xcc
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${60}
+| ${tg_if1_ip4}= | 192.168.10.2
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 200.0.0.1
+| ${dut2_if1_ip4}= | 200.0.0.2
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.2
+| ${wg_if1_ip4}= | 1.0.0.1
+| ${wg_if2_ip4}= | 1.0.0.2
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${n_tunnels}= | ${1}
+| ${listen_port}= | ${51820}
+| ${keepalive_time}= | ${256}
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP Enable Wireguard Async Mode on all VPP DUTs
+| | And Initialize WireGuard in 3-node circular topology
+| | And VPP WireGuard Create Tunnel Interfaces On DUTs
+| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0]
+| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0]
+| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4}
+| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time}
+| | ... | ${laddr_ip4} | ${raddr_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4udpwireguard1tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4udpwireguard1tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4udpwireguard1tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4udpwireguard1tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udpwireguard1tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udpwireguard1tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udpwireguard1tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udpwireguard1tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udpwireguard1tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4udpwireguard1tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4udpwireguard1tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4udpwireguard1tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2022 Intel and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/wireguard/wireguard.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_2
+| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | ASYNC | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4udpwireguard2tnlhwasync-ip4base
+|
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | and send to another DUT, where packets are decrypted and sent back \
+| ... | to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of WireGuard tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.src and IP.dst \
+| ... | are applied to both streams.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
+
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
+| ... | wireguard_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | HW_DH895xcc
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${60}
+| ${tg_if1_ip4}= | 192.168.10.2
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 200.0.0.1
+| ${dut2_if1_ip4}= | 200.0.0.2
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.2
+| ${wg_if1_ip4}= | 1.0.0.1
+| ${wg_if2_ip4}= | 1.0.0.2
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${n_tunnels}= | ${2}
+| ${listen_port}= | ${51820}
+| ${keepalive_time}= | ${256}
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP Enable Wireguard Async Mode on all VPP DUTs
+| | And Initialize WireGuard in 3-node circular topology
+| | And VPP WireGuard Create Tunnel Interfaces On DUTs
+| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0]
+| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0]
+| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4}
+| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time}
+| | ... | ${laddr_ip4} | ${raddr_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4udpwireguard2tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4udpwireguard2tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4udpwireguard2tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4udpwireguard2tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udpwireguard2tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udpwireguard2tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udpwireguard2tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udpwireguard2tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udpwireguard2tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4udpwireguard2tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4udpwireguard2tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4udpwireguard2tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2022 Intel and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/wireguard/wireguard.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
+| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | ASYNC | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4udpwireguard4tnlhwasync-ip4base
+|
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | and send to another DUT, where packets are decrypted and sent back \
+| ... | to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of WireGuard tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.src and IP.dst \
+| ... | are applied to both streams.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
+
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
+| ... | wireguard_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | HW_DH895xcc
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${60}
+| ${tg_if1_ip4}= | 192.168.10.2
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 200.0.0.1
+| ${dut2_if1_ip4}= | 200.0.0.2
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.2
+| ${wg_if1_ip4}= | 1.0.0.1
+| ${wg_if2_ip4}= | 1.0.0.2
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${n_tunnels}= | ${4}
+| ${listen_port}= | ${51820}
+| ${keepalive_time}= | ${256}
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP Enable Wireguard Async Mode on all VPP DUTs
+| | And Initialize WireGuard in 3-node circular topology
+| | And VPP WireGuard Create Tunnel Interfaces On DUTs
+| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0]
+| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0]
+| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4}
+| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time}
+| | ... | ${laddr_ip4} | ${raddr_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4udpwireguard4tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4udpwireguard4tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4udpwireguard4tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4udpwireguard4tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udpwireguard4tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udpwireguard4tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udpwireguard4tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udpwireguard4tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udpwireguard4tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4udpwireguard4tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4udpwireguard4tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4udpwireguard4tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2022 Intel and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/wireguard/wireguard.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_8
+| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | ASYNC | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4udpwireguard8tnlhwasync-ip4base
+|
+| Suite Setup | Setup suite topology interfaces | performance | cryptohw
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
+| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
+| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \
+| ... | and send to another DUT, where packets are decrypted and sent back \
+| ... | to TG.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are generated by TG on \
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
+| ... | (flow-group per direction, number of flows per flow-group equals to \
+| ... | number of WireGuard tunnels) with all packets \
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
+| ... | static payload. MAC addresses are matching MAC addresses of the TG \
+| ... | node interfaces. Incrementing of IP.src and IP.dst \
+| ... | are applied to both streams.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
+
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
+| ... | wireguard_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | HW_DH895xcc
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${60}
+| ${tg_if1_ip4}= | 192.168.10.2
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 200.0.0.1
+| ${dut2_if1_ip4}= | 200.0.0.2
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.2
+| ${wg_if1_ip4}= | 1.0.0.1
+| ${wg_if2_ip4}= | 1.0.0.2
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${n_tunnels}= | ${8}
+| ${listen_port}= | ${51820}
+| ${keepalive_time}= | ${256}
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP Enable Wireguard Async Mode on all VPP DUTs
+| | And Initialize WireGuard in 3-node circular topology
+| | And VPP WireGuard Create Tunnel Interfaces On DUTs
+| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0]
+| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0]
+| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4}
+| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time}
+| | ... | ${laddr_ip4} | ${raddr_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4udpwireguard8tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4udpwireguard8tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4udpwireguard8tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4udpwireguard8tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udpwireguard8tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udpwireguard8tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udpwireguard8tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udpwireguard8tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udpwireguard8tnlhwasync-ip4base-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4udpwireguard8tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4udpwireguard8tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4udpwireguard8tnlhwasync-ip4base-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
port: 22
username: testuser
password: Csit1234
+ cryptodev: "0000:f4:00.0"
uio_driver: vfio-pci
interfaces:
port1:
port: 22
username: testuser
password: Csit1234
+ cryptodev: "0000:f4:00.0"
uio_driver: vfio-pci
interfaces:
port1:
Code Review / csit.git / commitdiff