CSIT-891: Add data sources for 1801 report

Change-Id: I8c37cff547c74399fde074b11972e2fb95bfac15
Signed-off-by: Tibor Frank <tifrank@cisco.com>

diff --git a/docs/report/vpp_performance_tests/csit_release_notes.rst b/docs/report/vpp_performance_tests/csit_release_notes.rst
index 6e3d631..7419a85 100644 (file)
--- a/docs/report/vpp_performance_tests/csit_release_notes.rst
+++ b/docs/report/vpp_performance_tests/csit_release_notes.rst
@@ -50,28 +50,24 @@ Changes in CSIT |release|
 \r
        - Overall stability improvements;\r
 \r
 \r
        - Overall stability improvements;\r
 \r

-Performance Improvements\r
-------------------------\r
+Performance Changes\r
+-------------------\r

 \r
 \r

-Substantial improvements in measured packet throughput have been observed in a\r
-number of CSIT |release| tests listed below, with relative increase of\r
-double-digit percentage points. Relative improvements for this release are\r
-calculated against the test results listed in CSIT |release-1| report. The\r
+Substantial changes in measured packet throughput have been observed in a\r
+number of CSIT |release| tests listed below. Relative changes for this release\r
+are calculated against the test results listed in CSIT |release-1| report. The\r

 comparison is calculated between the mean values based on collected and\r
 archived test results' samples for involved VPP releases. Standard deviation\r
 comparison is calculated between the mean values based on collected and\r
 archived test results' samples for involved VPP releases. Standard deviation\r

-has been also listed for CSIT |release|. Performance numbers since release\r
-VPP-16.09 are provided for reference.\r
+has been also listed for CSIT |release|.\r

 \r
 \r

-NDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Non-Drop Rate Throughput discovery tests:\r
+NDR Throughput: Best 20 Changes\r
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\r

 \r
 .. only:: html\r
 \r
    .. csv-table::\r
       :align: center\r
 \r
 .. only:: html\r
 \r
    .. csv-table::\r
       :align: center\r

-      :file: performance_improvements/performance_improvements_ndr_top.csv\r
+      :file: performance_improvements/performance-changes-ndr-1t1c-top.csv\r

 \r
 .. only:: latex\r
 \r
 \r
 .. only:: latex\r
 \r


@@ -79,7 +75,7 @@ Non-Drop Rate Throughput discovery tests:
 \r
       \makeatletter\r
       \csvset{\r
 \r
       \makeatletter\r
       \csvset{\r

-        perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
+        perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r

       }\r
       \makeatother\r
 \r
       }\r
       \makeatother\r
 \r


@@ -90,20 +86,17 @@ Non-Drop Rate Throughput discovery tests:
         perfimprovements column width=1cm,\r
         late after line={\\\hline},\r
         late after last line={\end{longtable}}\r
         perfimprovements column width=1cm,\r
         late after line={\\\hline},\r
         late after last line={\end{longtable}}\r

-        ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_ndr_top.csv}\r
+        ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance-changes-ndr-1t1c-top.csv}\r

       }\r
 \r
       }\r
 \r

-\r
-PDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:\r
+NDR Throughput: Worst 20 Changes\r
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\r

 \r
 .. only:: html\r
 \r
    .. csv-table::\r
       :align: center\r
 \r
 .. only:: html\r
 \r
    .. csv-table::\r
       :align: center\r

-      :file: performance_improvements/performance_improvements_pdr_top.csv\r
+      :file: performance_improvements/performance-changes-ndr-1t1c-bottom.csv\r

 \r
 .. only:: latex\r
 \r
 \r
 .. only:: latex\r
 \r


@@ -111,7 +104,7 @@ Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:
 \r
       \makeatletter\r
       \csvset{\r
 \r
       \makeatletter\r
       \csvset{\r

-        perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
+        perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r

       }\r
       \makeatother\r
 \r
       }\r
       \makeatother\r
 \r


@@ -122,32 +115,32 @@ Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:
         perfimprovements column width=1cm,\r
         late after line={\\\hline},\r
         late after last line={\end{longtable}}\r
         perfimprovements column width=1cm,\r
         late after line={\\\hline},\r
         late after last line={\end{longtable}}\r

-        ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_pdr_top.csv}\r
+        ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance-changes-ndr-1t1c-bottom.csv}\r

       }\r
 \r
       }\r
 \r

+.. only:: html\r

 \r
 \r

-Measured improvements are in line with VPP code optimizations listed in\r
-`VPP-17.10 release notes\r
-<https://docs.fd.io/vpp/17.10/release_notes_1710.html>`_.\r
-\r
-Other Performance Changes\r
--------------------------\r
+      NDR Throughput: All Changes\r
+      ~~~~~~~~~~~~~~~~~~~~~~~~~~~\r

 \r
 \r

-Other changes in measured packet throughput, with either minor relative increase\r
-or decrease, have been observed in a number of CSIT |release| tests listed\r
-below. Relative changes are calculated against the test results listed in CSIT\r
-|release-1| report.\r
+      Complete results for all NDR tests are available in a CSV and pretty\r
+      ASCII formats:\r

 \r
 \r

-NDR Throughput\r
-~~~~~~~~~~~~~~\r
+        - `csv format for 1t1c <performance_improvements/performance-changes-ndr-1t1c-full.csv>`_,\r
+        - `csv format for 2t2c <performance_improvements/performance-changes-ndr-2t2c-full.csv>`_,\r
+        - `csv format for 4t4c <performance_improvements/performance-changes-ndr-4t4c-full.csv>`_,\r
+        - `pretty ASCII format for 1t1c <performance_improvements/performance-changes-ndr-1t1c-full.txt>`_,\r
+        - `pretty ASCII format for 2t2c <performance_improvements/performance-changes-ndr-2t2c-full.txt>`_,\r
+        - `pretty ASCII format for 4t4c <performance_improvements/performance-changes-ndr-4t4c-full.txt>`_.\r

 \r
 \r

-Non-Drop Rate Throughput discovery tests:\r
+PDR Throughput: Best 20 Changes\r
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\r

 \r
 .. only:: html\r
 \r
    .. csv-table::\r
       :align: center\r
 \r
 .. only:: html\r
 \r
    .. csv-table::\r
       :align: center\r

-      :file: performance_improvements/performance_improvements_ndr_low.csv\r
+      :file: performance_improvements/performance-changes-pdr-1t1c-top.csv\r

 \r
 .. only:: latex\r
 \r
 \r
 .. only:: latex\r
 \r


@@ -155,7 +148,7 @@ Non-Drop Rate Throughput discovery tests:
 \r
       \makeatletter\r
       \csvset{\r
 \r
       \makeatletter\r
       \csvset{\r

-        perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
+        perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r

       }\r
       \makeatother\r
 \r
       }\r
       \makeatother\r
 \r


@@ -166,20 +159,17 @@ Non-Drop Rate Throughput discovery tests:
         perfimprovements column width=1cm,\r
         late after line={\\\hline},\r
         late after last line={\end{longtable}}\r
         perfimprovements column width=1cm,\r
         late after line={\\\hline},\r
         late after last line={\end{longtable}}\r

-        ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_ndr_low.csv}\r
+        ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance-changes-pdr-1t1c-top.csv}\r

       }\r
 \r
       }\r
 \r

-\r
-PDR Throughput\r
-~~~~~~~~~~~~~~\r
-\r
-Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:\r
+PDR Throughput: Worst 20 Changes\r
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\r

 \r
 .. only:: html\r
 \r
    .. csv-table::\r
       :align: center\r
 \r
 .. only:: html\r
 \r
    .. csv-table::\r
       :align: center\r

-      :file: performance_improvements/performance_improvements_pdr_low.csv\r
+      :file: performance_improvements/performance-changes-pdr-1t1c-bottom.csv\r

 \r
 .. only:: latex\r
 \r
 \r
 .. only:: latex\r
 \r


@@ -187,7 +177,7 @@ Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:
 \r
       \makeatletter\r
       \csvset{\r
 \r
       \makeatletter\r
       \csvset{\r

-        perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r
+        perfimprovements column width/.style={after head=\csv@pretable\begin{longtable}{m{4cm} m{#1} m{#1} m{#1} m{#1} m{#1}}\csv@tablehead},\r

       }\r
       \makeatother\r
 \r
       }\r
       \makeatother\r
 \r


@@ -198,9 +188,27 @@ Partial Drop Rate thoughput discovery tests with packet Loss Tolerance of 0.5%:
         perfimprovements column width=1cm,\r
         late after line={\\\hline},\r
         late after last line={\end{longtable}}\r
         perfimprovements column width=1cm,\r
         late after line={\\\hline},\r
         late after last line={\end{longtable}}\r

-        ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance_improvements_pdr_low.csv}\r
+        ]{../_tmp/src/vpp_performance_tests/performance_improvements/performance-changes-pdr-1t1c-bottom.csv}\r

       }\r
 \r
       }\r
 \r

+.. only:: html\r
+\r
+      PDR Throughput: All Changes\r
+      ~~~~~~~~~~~~~~~~~~~~~~~~~~~\r
+\r
+            Complete results for all PDR tests are available in a CSV and pretty\r
+            ASCII formats:\r
+\r
+              - `csv format for 1t1c <performance_improvements/performance-changes-pdr-1t1c-full.csv>`_,\r
+              - `csv format for 2t2c <performance_improvements/performance-changes-pdr-2t2c-full.csv>`_,\r
+              - `csv format for 4t4c <performance_improvements/performance-changes-pdr-4t4c-full.csv>`_,\r
+              - `pretty ASCII format for 1t1c <performance_improvements/performance-changes-pdr-1t1c-full.txt>`_,\r
+              - `pretty ASCII format for 2t2c <performance_improvements/performance-changes-pdr-2t2c-full.txt>`_,\r
+              - `pretty ASCII format for 4t4c <performance_improvements/performance-changes-pdr-4t4c-full.txt>`_.\r
+\r
+Measured improvements are in line with VPP code optimizations listed in\r
+`VPP-17.10 release notes\r
+<https://docs.fd.io/vpp/17.10/release_notes_1710.html>`_.\r

 \r
 Known Issues\r
 ------------\r
 \r
 Known Issues\r
 ------------\r

diff --git a/docs/report/vpp_performance_tests/impact_meltdown/index.rst b/docs/report/vpp_performance_tests/impact_meltdown/index.rst
index 0db55ec..35ecb74 100644 (file)
--- a/docs/report/vpp_performance_tests/impact_meltdown/index.rst
+++ b/docs/report/vpp_performance_tests/impact_meltdown/index.rst
@@ -17,7 +17,7 @@ performance impact), followed by Worst 20 changes (maximal performance
 impact). All results are also provided in downloadable CSV and pretty
 ASCII formats.
 
 impact). All results are also provided in downloadable CSV and pretty
 ASCII formats.
 

-NDR throughput: Best 20 changes
+NDR Throughput: Best 20 Changes

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html


@@ -46,7 +46,7 @@ NDR throughput: Best 20 changes
         ]{../_build/_static/vpp/meltdown-impact-ndr-1t1c-top.csv}
       }
 
         ]{../_build/_static/vpp/meltdown-impact-ndr-1t1c-top.csv}
       }
 

-NDR throughput: Worst 20 changes
+NDR Throughput: Worst 20 Changes

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html


@@ -77,20 +77,20 @@ NDR throughput: Worst 20 changes
 
 .. only:: html
 
 
 .. only:: html
 

-NDR throughput: All changes
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
+      NDR Throughput: All Changes
+      ~~~~~~~~~~~~~~~~~~~~~~~~~~~

 
 

-Complete results for all NDR tests are available in a CSV and pretty
-ASCII formats:
+      Complete results for all NDR tests are available in a CSV and pretty
+      ASCII formats:

 
 

-  - `csv format for 1t1c <../../_static/vpp/meltdown-impact-ndr-1t1c-full.csv>`_,
-  - `csv format for 2t2c <../../_static/vpp/meltdown-impact-ndr-2t2c-full.csv>`_,
-  - `csv format for 4t4c <../../_static/vpp/meltdown-impact-ndr-4t4c-full.csv>`_,
-  - `pretty ASCII format for 1t1c <../../_static/vpp/meltdown-impact-ndr-1t1c-full.txt>`_,
-  - `pretty ASCII format for 2t2c <../../_static/vpp/meltdown-impact-ndr-2t2c-full.txt>`_,
-  - `pretty ASCII format for 4t4c <../../_static/vpp/meltdown-impact-ndr-4t4c-full.txt>`_.
+        - `csv format for 1t1c <../../_static/vpp/meltdown-impact-ndr-1t1c-full.csv>`_,
+        - `csv format for 2t2c <../../_static/vpp/meltdown-impact-ndr-2t2c-full.csv>`_,
+        - `csv format for 4t4c <../../_static/vpp/meltdown-impact-ndr-4t4c-full.csv>`_,
+        - `pretty ASCII format for 1t1c <../../_static/vpp/meltdown-impact-ndr-1t1c-full.txt>`_,
+        - `pretty ASCII format for 2t2c <../../_static/vpp/meltdown-impact-ndr-2t2c-full.txt>`_,
+        - `pretty ASCII format for 4t4c <../../_static/vpp/meltdown-impact-ndr-4t4c-full.txt>`_.

 
 

-PDR throughput: Best 20 changes
+PDR Throughput: Best 20 Changes

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html


@@ -119,7 +119,7 @@ PDR throughput: Best 20 changes
         ]{../_build/_static/vpp/meltdown-impact-pdr-1t1c-top.csv}
       }
 
         ]{../_build/_static/vpp/meltdown-impact-pdr-1t1c-top.csv}
       }
 

-PDR throughput: Worst 20 changes
+PDR Throughput: Worst 20 Changes

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html


@@ -150,15 +150,15 @@ PDR throughput: Worst 20 changes
 
 .. only:: html
 
 
 .. only:: html
 

-PDR throughput: All changes
+PDR Throughput: All Changes

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

-Complete results for all PDR tests are available in a CSV and pretty
-ASCII formats:
+      Complete results for all PDR tests are available in a CSV and pretty
+      ASCII formats:

 
 

-  - `csv format for 1t1c <../../_static/vpp/meltdown-impact-pdr-1t1c-full.csv>`_,
-  - `csv format for 2t2c <../../_static/vpp/meltdown-impact-pdr-2t2c-full.csv>`_,
-  - `csv format for 4t4c <../../_static/vpp/meltdown-impact-pdr-4t4c-full.csv>`_,
-  - `pretty ASCII format for 1t1c <../../_static/vpp/meltdown-impact-pdr-1t1c-full.txt>`_,
-  - `pretty ASCII format for 2t2c <../../_static/vpp/meltdown-impact-pdr-2t2c-full.txt>`_,
-  - `pretty ASCII format for 4t4c <../../_static/vpp/meltdown-impact-pdr-4t4c-full.txt>`_.
+        - `csv format for 1t1c <../../_static/vpp/meltdown-impact-pdr-1t1c-full.csv>`_,
+        - `csv format for 2t2c <../../_static/vpp/meltdown-impact-pdr-2t2c-full.csv>`_,
+        - `csv format for 4t4c <../../_static/vpp/meltdown-impact-pdr-4t4c-full.csv>`_,
+        - `pretty ASCII format for 1t1c <../../_static/vpp/meltdown-impact-pdr-1t1c-full.txt>`_,
+        - `pretty ASCII format for 2t2c <../../_static/vpp/meltdown-impact-pdr-2t2c-full.txt>`_,
+        - `pretty ASCII format for 4t4c <../../_static/vpp/meltdown-impact-pdr-4t4c-full.txt>`_.

diff --git a/docs/report/vpp_performance_tests/impact_spectreandmeltdown/index.rst b/docs/report/vpp_performance_tests/impact_spectreandmeltdown/index.rst
index 671b411..eec38e8 100644 (file)
--- a/docs/report/vpp_performance_tests/impact_spectreandmeltdown/index.rst
+++ b/docs/report/vpp_performance_tests/impact_spectreandmeltdown/index.rst
@@ -20,7 +20,7 @@ performance impact), followed by Worst 20 changes (maximal performance
 impact). All results are also provided in downloadable CSV and pretty
 ASCII formats.
 
 impact). All results are also provided in downloadable CSV and pretty
 ASCII formats.
 

-NDR throughput: Best 20 changes
+NDR Throughput: Best 20 Changes

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html


@@ -49,7 +49,7 @@ NDR throughput: Best 20 changes
         ]{../_build/_static/vpp/meltdown-spectre-impact-ndr-1t1c-top.csv}
       }
 
         ]{../_build/_static/vpp/meltdown-spectre-impact-ndr-1t1c-top.csv}
       }
 

-NDR throughput: Worst 20 changes
+NDR Throughput: Worst 20 Changes

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html


@@ -80,21 +80,20 @@ NDR throughput: Worst 20 changes
 
 .. only:: html
 
 
 .. only:: html
 

+      NDR Throughput: All Changes
+      ~~~~~~~~~~~~~~~~~~~~~~~~~~~

 
 

-NDR throughput: All changes
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
+      Complete results for all NDR tests are available in a CSV and pretty
+      ASCII formats:

 
 

-Complete results for all NDR tests are available in a CSV and pretty
-ASCII formats:
+        - `csv format for 1t1c <../../_static/vpp/meltdown-spectre-impact-ndr-1t1c-full.csv>`_,
+        - `csv format for 2t2c <../../_static/vpp/meltdown-spectre-impact-ndr-2t2c-full.csv>`_,
+        - `csv format for 4t4c <../../_static/vpp/meltdown-spectre-impact-ndr-4t4c-full.csv>`_,
+        - `pretty ASCII format for 1t1c <../../_static/vpp/meltdown-spectre-impact-ndr-1t1c-full.txt>`_,
+        - `pretty ASCII format for 2t2c <../../_static/vpp/meltdown-spectre-impact-ndr-2t2c-full.txt>`_,
+        - `pretty ASCII format for 4t4c <../../_static/vpp/meltdown-spectre-impact-ndr-4t4c-full.txt>`_.

 
 

-  - `csv format for 1t1c <../../_static/vpp/meltdown-spectre-impact-ndr-1t1c-full.csv>`_,
-  - `csv format for 2t2c <../../_static/vpp/meltdown-spectre-impact-ndr-2t2c-full.csv>`_,
-  - `csv format for 4t4c <../../_static/vpp/meltdown-spectre-impact-ndr-4t4c-full.csv>`_,
-  - `pretty ASCII format for 1t1c <../../_static/vpp/meltdown-spectre-impact-ndr-1t1c-full.txt>`_,
-  - `pretty ASCII format for 2t2c <../../_static/vpp/meltdown-spectre-impact-ndr-2t2c-full.txt>`_,
-  - `pretty ASCII format for 4t4c <../../_static/vpp/meltdown-spectre-impact-ndr-4t4c-full.txt>`_.
-
-PDR throughput: Best 20 changes
+PDR Throughput: Best 20 Changes

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html


@@ -123,7 +122,7 @@ PDR throughput: Best 20 changes
         ]{../_build/_static/vpp/meltdown-spectre-impact-pdr-1t1c-top.csv}
       }
 
         ]{../_build/_static/vpp/meltdown-spectre-impact-pdr-1t1c-top.csv}
       }
 

-PDR throughput: Worst 20 changes
+PDR Throughput: Worst 20 Changes

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 .. only:: html


@@ -154,15 +153,15 @@ PDR throughput: Worst 20 changes
 
 .. only:: html
 
 
 .. only:: html
 

-PDR throughput: All changes
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
+      PDR Throughput: All Changes
+      ~~~~~~~~~~~~~~~~~~~~~~~~~~~

 
 

-Complete results for all PDR tests are available in a CSV and pretty
-ASCII formats:
+      Complete results for all PDR tests are available in a CSV and pretty
+      ASCII formats:

 
 

-  - `csv format for 1t1c <../../_static/vpp/meltdown-spectre-impact-pdr-1t1c-full.csv>`_,
-  - `csv format for 2t2c <../../_static/vpp/meltdown-spectre-impact-pdr-2t2c-full.csv>`_,
-  - `csv format for 4t4c <../../_static/vpp/meltdown-spectre-impact-pdr-4t4c-full.csv>`_,
-  - `pretty ASCII format for 1t1c <../../_static/vpp/meltdown-spectre-impact-pdr-1t1c-full.txt>`_,
-  - `pretty ASCII format for 2t2c <../../_static/vpp/meltdown-spectre-impact-pdr-2t2c-full.txt>`_,
-  - `pretty ASCII format for 4t4c <../../_static/vpp/meltdown-spectre-impact-pdr-4t4c-full.txt>`_.
+        - `csv format for 1t1c <../../_static/vpp/meltdown-spectre-impact-pdr-1t1c-full.csv>`_,
+        - `csv format for 2t2c <../../_static/vpp/meltdown-spectre-impact-pdr-2t2c-full.csv>`_,
+        - `csv format for 4t4c <../../_static/vpp/meltdown-spectre-impact-pdr-4t4c-full.csv>`_,
+        - `pretty ASCII format for 1t1c <../../_static/vpp/meltdown-spectre-impact-pdr-1t1c-full.txt>`_,
+        - `pretty ASCII format for 2t2c <../../_static/vpp/meltdown-spectre-impact-pdr-2t2c-full.txt>`_,
+        - `pretty ASCII format for 4t4c <../../_static/vpp/meltdown-spectre-impact-pdr-4t4c-full.txt>`_.

diff --git a/resources/tools/presentation/specification.yaml b/resources/tools/presentation/specification.yaml
index 4b61ddb..b19b3f7 100644 (file)
--- a/resources/tools/presentation/specification.yaml
+++ b/resources/tools/presentation/specification.yaml
@@ -116,24 +116,7 @@
 #      - 11
 #      - 12
 #      - 13
 #      - 11
 #      - 12
 #      - 13

-# TODO: Add the data sources
-    plot-throughput-speedup-analysis:
-      csit-vpp-perf-1801-all:
-      - 122
-      - 126
-      - 129
-    performance-improvements:
-      csit-vpp-perf-1707-all:
-      - 9
-      - 10
-      - 13
-      - 14
-      - 15
-      - 16
-      - 17
-      - 18
-      - 19
-      - 21
+    vpp-performance-changes:

       csit-vpp-perf-1710-all:
       - 11
       - 12
       csit-vpp-perf-1710-all:
       - 11
       - 12


@@ -150,22 +133,56 @@
       - 124
       - 127
       - 128
       - 124
       - 127
       - 128

-      csit-ligato-perf-1710-all:
-      - 5
-      - 7
-      - 8
-      - 9
-      - 10
-      - 11
-      - 12
-      - 13
-      - 16
-      - 17
-      csit-ligato-perf-1801-all:
-      - 1
-      - 3
-      - 7
-# TODO:
+# TODO: Add the data sources
+    plot-throughput-speedup-analysis:
+      csit-vpp-perf-1801-all:
+      - 122
+      - 126
+      - 129
+#    performance-improvements:
+#      csit-vpp-perf-1707-all:
+#      - 9
+#      - 10
+#      - 13
+#      - 14
+#      - 15
+#      - 16
+#      - 17
+#      - 18
+#      - 19
+#      - 21
+#      csit-vpp-perf-1710-all:
+#      - 11
+#      - 12
+#      - 13
+#      - 14
+#      - 15
+#      - 16
+#      - 17
+#      - 18
+#      - 19
+#      - 20
+## TODO: Add the data sources
+#      csit-vpp-perf-1801-all:
+#      - 124
+#      - 127
+#      - 128
+#      csit-ligato-perf-1710-all:
+#      - 5
+#      - 7
+#      - 8
+#      - 9
+#      - 10
+#      - 11
+#      - 12
+#      - 13
+#      - 16
+#      - 17
+#      csit-ligato-perf-1801-all:
+#      - 1
+#      - 3
+#      - 7
+# TODO: Add the data sources

     vpp-perf-results:
       csit-vpp-perf-1801-all:
       - 122
     vpp-perf-results:
       csit-vpp-perf-1801-all:
       - 122


@@ -174,7 +191,7 @@
     vpp-func-results:
       csit-vpp-functional-1801-ubuntu1604-virl:
       - "lastSuccessfulBuild"
     vpp-func-results:
       csit-vpp-functional-1801-ubuntu1604-virl:
       - "lastSuccessfulBuild"

-# TODO:
+# TODO: Add the data sources

     ligato-perf-results:
       csit-ligato-perf-1801-all:
       - 1
     ligato-perf-results:
       csit-ligato-perf-1801-all:
       - 1


@@ -187,7 +204,7 @@
     nsh-func-results:
       csit-nsh_sfc-verify-func-1801-ubuntu1604-virl:
       - 1
     nsh-func-results:
       csit-nsh_sfc-verify-func-1801-ubuntu1604-virl:
       - 1

-# TODO:
+# TODO: Add the data sources

     plot-vpp-throughput-latency:
       csit-vpp-perf-1801-all:
       - 124
     plot-vpp-throughput-latency:
       csit-vpp-perf-1801-all:
       - 124


@@ -204,7 +221,7 @@
       - 8
       - 10
       - 12
       - 8
       - 10
       - 12

-# TODO:
+# TODO: Add the data sources

     plot-ligato-throughput-latency:
       csit-ligato-perf-1801-all:
       - 1
     plot-ligato-throughput-latency:
       csit-ligato-perf-1801-all:
       - 1


@@ -461,17 +478,17 @@
     download-path: "{job}/{build}/robot/report/*zip*/{filename}"
     extract: "robot-plugin/output.xml"
   builds:
     download-path: "{job}/{build}/robot/report/*zip*/{filename}"
     extract: "robot-plugin/output.xml"
   builds:

-    csit-vpp-perf-1707-all:
-    - 9
-    - 10
-    - 13
-    - 14
-    - 15
-    - 16
-    - 17
-    - 18
-    - 19
-    - 21
+#    csit-vpp-perf-1707-all:
+#    - 9
+#    - 10
+#    - 13
+#    - 14
+#    - 15
+#    - 16
+#    - 17
+#    - 18
+#    - 19
+#    - 21

     csit-vpp-perf-1710-all:
     - 11
     - 12
     csit-vpp-perf-1710-all:
     - 11
     - 12


@@ -617,45 +634,85 @@
 
 -
   type: "table"
 
 -
   type: "table"

-  title: "Performance improvements"
-  algorithm: "table_performance_improvements"
-  template: "{DIR[DTR,PERF,VPP,IMPRV]}/tmpl_performance_improvements.csv"
+  title: "VPP Performance Changes"
+  algorithm: "table_performance_comparison"

   output-file-ext: ".csv"
   output-file-ext: ".csv"

-  output-file: "{DIR[DTR,PERF,VPP,IMPRV]}/performance_improvements"
-  columns:
-  -
-    title: "Test Name"
-    data: "template 1"
-  -
-    title: "16.09 mean [Mpps]"
-    data: "template 2"
-  -
-    title: "17.01 mean [Mpps]"
-    data: "template 3"
-  -
-    title: "17.04 mean [Mpps]"
-    data: "template 4"
-  -
-    title: "17.07 mean [Mpps]"
-    data: "data csit-vpp-perf-1707-all mean"
-  -
-    title: "17.10 mean [Mpps]"
-    data: "data csit-vpp-perf-1710-all csit-ligato-perf-1710-all mean"
-  -
-    title: "18.01 mean [Mpps]"
-    data: "data csit-vpp-perf-1801-all csit-ligato-perf-1801-all mean"
-  -
-    title: "18.01 stdev [Mpps]"
-    data: "data csit-vpp-perf-1801-all csit-ligato-perf-1801-all stdev"
-  -
-    title: "17.10 to 18.01 change [%]"
-    data: "operation relative_change 5 6"
-  rows: "generated"
-  data:
-    "performance-improvements"
-  filter: "template"
+# TODO: specify dir
+  output-file: "{DIR[DTR,PERF,VPP,IMPRV]}/performance-changes"
+  reference:
+    title: "Release 1710"
+# TODO: specify data sources
+    data:
+      csit-vpp-perf-1710-all:
+      - 11
+      - 12
+      - 13
+      - 14
+      - 15
+      - 16
+      - 17
+      - 18
+      - 19
+      - 20
+  compare:
+    title: "Release 1801"
+# TODO: specify data sources
+    data:
+      csit-vpp-perf-1801-all:
+      - 124
+      - 127
+      - 128
+  data: "vpp-performance-changes"
+  filter: "all"

   parameters:
   parameters:

+  - "name"
+  - "parent"

   - "throughput"
   - "throughput"

+  # Number of the best and the worst tests presented in the table. Use 0 (zero)
+  # to present all tests.
+  nr-of-tests-shown: 20
+
+#-
+#  type: "table"
+#  title: "Performance improvements"
+#  algorithm: "table_performance_improvements"
+#  template: "{DIR[DTR,PERF,VPP,IMPRV]}/tmpl_performance_improvements.csv"
+#  output-file-ext: ".csv"
+#  output-file: "{DIR[DTR,PERF,VPP,IMPRV]}/performance_improvements"
+#  columns:
+#  -
+#    title: "Test Name"
+#    data: "template 1"
+#  -
+#    title: "16.09 mean [Mpps]"
+#    data: "template 2"
+#  -
+#    title: "17.01 mean [Mpps]"
+#    data: "template 3"
+#  -
+#    title: "17.04 mean [Mpps]"
+#    data: "template 4"
+#  -
+#    title: "17.07 mean [Mpps]"
+#    data: "data csit-vpp-perf-1707-all mean"
+#  -
+#    title: "17.10 mean [Mpps]"
+#    data: "data csit-vpp-perf-1710-all csit-ligato-perf-1710-all mean"
+#  -
+#    title: "18.01 mean [Mpps]"
+#    data: "data csit-vpp-perf-1801-all csit-ligato-perf-1801-all mean"
+#  -
+#    title: "18.01 stdev [Mpps]"
+#    data: "data csit-vpp-perf-1801-all csit-ligato-perf-1801-all stdev"
+#  -
+#    title: "17.10 to 18.01 change [%]"
+#    data: "operation relative_change 5 6"
+#  rows: "generated"
+#  data:
+#    "performance-improvements"
+#  filter: "template"
+#  parameters:
+#  - "throughput"

 
 -
   type: "table"
 
 -
   type: "table"