Report: Tables with detailed results for MRR 07/25107/1
authorTibor Frank <tifrank@cisco.com>
Thu, 13 Feb 2020 14:58:42 +0000 (15:58 +0100)
committerTibor Frank <tifrank@cisco.com>
Thu, 13 Feb 2020 14:58:42 +0000 (15:58 +0100)
Change-Id: I5506bbdc6bc5e5de4f219fa349659ddf9d0e55a8
Signed-off-by: Tibor Frank <tifrank@cisco.com>
docs/report/dpdk_performance_tests/csit_release_notes.rst
docs/report/vpp_performance_tests/csit_release_notes.rst
resources/tools/presentation/input_data_parser.py
resources/tools/presentation/specification.yaml

index 2dd10e0..6d7c536 100644 (file)
@@ -16,6 +16,10 @@ Changes in |csit-release|
      will be added in subsequent maintenance report version(s) once
      the issue is resolved. See :ref:`dpdk_known_issues`.
 
+#. DPDK RELEASE VERSION CHANGE
+
+   - |csit-release| tested |dpdk-release|, as used by |vpp-release|.
+
 ..
     // Alternative Note for 1st Bullet when bad microcode Skx, Clx results are published
     - **Intel Xeon 2n-skx, 3n-skx and 2n-clx testbeds**: Testpmd and
@@ -28,10 +32,6 @@ Changes in |csit-release|
       corrected in subsequent maintenance report version(s) once the
       issue is resolved. See :ref:`vpp_known_issues`.
 
-#. DPDK RELEASE VERSION CHANGE
-
-   - |csit-release| tested |dpdk-release|, as used by |vpp-release|.
-
 .. _dpdk_known_issues:
 
 Known Issues
index f79e331..2057bb4 100644 (file)
@@ -43,18 +43,6 @@ Changes in |csit-release|
    - **Load Balancer tests**: Added VPP performance tests for Maglev,
      L3DSR (Direct Server Return), Layer 4 Load Balancing NAT Mode.
 
-..
-    // Alternative Note for 1st Bullet when bad microcode Skx, Clx results are published
-    - **Intel Xeon 2n-skx, 3n-skx and 2n-clx testbeds**: VPP performance
-      test data is included in this report version, but it shows lower
-      performance and behaviour inconsistency of these systems
-      following the upgrade of processor microcode packages (skx ucode
-      0x2000064, clx ucode 0x500002c) as part of updating Ubuntu 18.04
-      LTS kernel version. Tested VPP and DPDK applications (L3fwd) are
-      affected. Skx and Clx test data will be corrected in subsequent
-      maintenance report version(s) once the issue is resolved. See
-      :ref:`vpp_known_issues`.
-
 #. TEST FRAMEWORK
 
    - **CSIT Python3 support**: Full migration of CSIT from Python2.7 to
@@ -88,6 +76,18 @@ Changes in |csit-release|
      background packet loads based on TRex latency hdrhistogram
      measurements.
 
+..
+    // Alternative Note for 1st Bullet when bad microcode Skx, Clx results are published
+    - **Intel Xeon 2n-skx, 3n-skx and 2n-clx testbeds**: VPP performance
+      test data is included in this report version, but it shows lower
+      performance and behaviour inconsistency of these systems
+      following the upgrade of processor microcode packages (skx ucode
+      0x2000064, clx ucode 0x500002c) as part of updating Ubuntu 18.04
+      LTS kernel version. Tested VPP and DPDK applications (L3fwd) are
+      affected. Skx and Clx test data will be corrected in subsequent
+      maintenance report version(s) once the issue is resolved. See
+      :ref:`vpp_known_issues`.
+
 .. raw:: latex
 
     \clearpage
index 5d9234e..a619bd2 100644 (file)
@@ -220,6 +220,8 @@ class ExecutionChecker(ResultVisitor):
         r'Latency at 50% PDR:.*\[\'(.*)\', \'(.*)\'\].*\n'
         r'Latency at 10% PDR:.*\[\'(.*)\', \'(.*)\'\].*\n'
     )
+    REGEX_MRR_MSG_INFO = re.compile(r'.*\[(.*)\]')
+
     # TODO: Remove when not needed
     REGEX_NDRPDR_LAT_BASE = re.compile(
         r'LATENCY.*\[\'(.*)\', \'(.*)\'\]\s\n.*\n.*\n'
@@ -355,15 +357,34 @@ class ExecutionChecker(ResultVisitor):
         """
         return self._data
 
+    def _get_data_from_mrr_test_msg(self, msg):
+        """Get info from message of MRR performance tests.
+
+        :param msg: Message to be processed.
+        :type msg: str
+        :returns: Processed message or original message if a problem occurs.
+        :rtype: str
+        """
+
+        groups = re.search(self.REGEX_MRR_MSG_INFO, msg)
+        if not groups or groups.lastindex != 1:
+            return msg
+
+        try:
+            data = groups.group(1).split(u", ")
+        except (AttributeError, IndexError, ValueError, KeyError):
+            return msg
+
+        out_str = u"["
+        try:
+            for item in data:
+                out_str += f"{float(item):.2f}, "
+            return out_str[:-2] + u"]"
+        except (AttributeError, IndexError, ValueError, KeyError):
+            return msg
+
     def _get_data_from_perf_test_msg(self, msg):
-        """Get
-            - NDR_LOWER
-            - LATENCY
-            - NDR_UPPER
-            - PDR_LOWER
-            - LATENCY
-            - PDR_UPPER
-        from message of NDRPDR performance tests.
+        """Get info from message of NDRPDR performance tests.
 
         :param msg: Message to be processed.
         :type msg: str
@@ -947,7 +968,7 @@ class ExecutionChecker(ResultVisitor):
             replace(u'\r', u'').\
             replace(u'[', u' |br| [').\
             replace(u' |br| [', u'[', 1)
-        test_result[u"msg"] = self._get_data_from_perf_test_msg(test.message).\
+        test_result[u"msg"] = test.message.\
             replace(u'\n', u' |br| ').\
             replace(u'\r', u'').\
             replace(u'"', u"'")
@@ -989,6 +1010,11 @@ class ExecutionChecker(ResultVisitor):
 
         if test.status == u"PASS":
             if u"NDRPDR" in tags:
+                test_result[u"msg"] = self._get_data_from_perf_test_msg(
+                    test.message). \
+                    replace(u'\n', u' |br| '). \
+                    replace(u'\r', u''). \
+                    replace(u'"', u"'")
                 test_result[u"type"] = u"NDRPDR"
                 test_result[u"throughput"], test_result[u"status"] = \
                     self._get_ndrpdr_throughput(test.message)
@@ -1003,6 +1029,11 @@ class ExecutionChecker(ResultVisitor):
                 groups = re.search(self.REGEX_TCP, test.message)
                 test_result[u"result"] = int(groups.group(2))
             elif u"MRR" in tags or u"FRMOBL" in tags or u"BMRR" in tags:
+                test_result[u"msg"] = self._get_data_from_mrr_test_msg(
+                    test.message). \
+                    replace(u'\n', u' |br| '). \
+                    replace(u'\r', u''). \
+                    replace(u'"', u"'")
                 if u"MRR" in tags:
                     test_result[u"type"] = u"MRR"
                 else:
index f411013..aa81d71 100644 (file)
@@ -32,6 +32,7 @@
     DIR[DTR,PERF,DPDK,2N,CLX]: "{DIR[DTR]}/dpdk_performance_results_2n_clx"
     DIR[DTR,PERF,DPDK,2N,DNV]: "{DIR[DTR]}/dpdk_performance_results_2n_dnv"
     DIR[DTR,PERF,DPDK,3N,DNV]: "{DIR[DTR]}/dpdk_performance_results_3n_dnv"
+    DIR[DTR,PERF,DPDK,3N,TSH]: "{DIR[DTR]}/dpdk_performance_results_3n_tsh"
     DIR[DTR,PERF,VPP,3N,HSW]: "{DIR[DTR]}/vpp_performance_results_3n_hsw"
     DIR[DTR,PERF,VPP,3N,SKX]: "{DIR[DTR]}/vpp_performance_results_3n_skx"
     DIR[DTR,PERF,VPP,2N,SKX]: "{DIR[DTR]}/vpp_performance_results_2n_skx"
   columns:
   - title: " |prein| Test Name |preout| "
     data: "data name"
-  - title: "Status"
+  - title: " |prein| Maximum Receive Rate trial [Mpps] |preout| "
     data: "data msg"
   rows: "generated"
   data: "vpp-mrr-results-3n-hsw"
 #  columns:
 #  - title: " |prein| Test Name |preout| "
 #    data: "data name"
-#  - title: "Status"
+#  - title: " |prein| Maximum Receive Rate trial [Mpps] |preout| "
 #    data: "data msg"
 #  rows: "generated"
 #  data: "vpp-mrr-results-3n-skx"
 #  columns:
 #  - title: " |prein| Test Name |preout| "
 #    data: "data name"
-#  - title: "Status"
+#  - title: " |prein| Maximum Receive Rate trial [Mpps] |preout| "
 #    data: "data msg"
 #  rows: "generated"
 #  data: "vpp-mrr-results-2n-skx"
 #  columns:
 #  - title: " |prein| Test Name |preout| "
 #    data: "data name"
-#  - title: "Status"
+#  - title: " |prein| Maximum Receive Rate trial [Mpps] |preout| "
 #    data: "data msg"
 #  rows: "generated"
 #  data: "vpp-mrr-results-2n-clx"
 #  columns:
 #  - title: " |prein| Test Name |preout| "
 #    data: "data name"
-#  - title: "Status"
+#  - title: " |prein| Maximum Receive Rate trial [Mpps] |preout| "
 #    data: "data msg"
 #  rows: "generated"
 #  data: "vpp-mrr-results-3n-tsh"
   columns:
   - title: " |prein| Test Name |preout| "
     data: "data name"
-  - title: "Status"
+  - title: " |prein| Maximum Receive Rate trial [Mpps] |preout| "
     data: "data msg"
   rows: "generated"
   data: "vpp-mrr-results-3n-dnv"
   columns:
   - title: " |prein| Test Name |preout| "
     data: "data name"
-  - title: "Status"
+  - title: " |prein| Maximum Receive Rate trial [Mpps] |preout| "
     data: "data msg"
   rows: "generated"
   data: "vpp-mrr-results-2n-dnv"
   - "parent"
   - "msg"
 
+# Detailed Test Results - DPDK Performance Results 3n-tsh
+- type: "table"
+  title: "Detailed Test Results - DPDK Performance Results 3n-tsh"
+  algorithm: "table_details"
+  output-file-ext: ".csv"
+  output-file: "{DIR[DTR,PERF,DPDK,3N,TSH]}/dpdk_performance_results_3n_tsh"
+  columns:
+  - title: " |prein| Test Name |preout| "
+    data: "data name"
+  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
+    data: "data msg"
+  rows: "generated"
+  data: "dpdk-perf-results-3n-tsh"
+  filter: "all"
+  parameters:
+  - "name"
+  - "parent"
+  - "msg"
+
 ################################################################################
 ###                                F I L E S                                 ###
 ################################################################################
   - "parent"
   data-start-level: 3
 
+# DPDK Performance Results 3n-tsh
+- type: "file"
+  title: "DPDK Performance Results 3n-tsh"
+  algorithm: "file_test_results"
+  output-file-ext: ".rst"
+  output-file: "{DIR[DTR,PERF,DPDK,3N,TSH]}/dpdk_performance_results_3n_tsh"
+  file-header: "\n.. |br| raw:: html\n\n    <br />\n\n\n.. |prein| raw:: html\n\n    <pre>\n\n\n.. |preout| raw:: html\n\n    </pre>\n\n"
+  dir-tables: "{DIR[DTR,PERF,DPDK,3N,TSH]}"
+  data: "dpdk-perf-results-3n-tsh"
+  filter: "all"
+  parameters:
+  - "name"
+  - "doc"
+  - "level"
+  - "parent"
+  data-start-level: 3
+
 ################################################################################
 ###                                P L O T S                                 ###
 ################################################################################

©2016 FD.io a Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation. Linux is a registered trademark of Linus Torvalds.
Please see our privacy policy and terms of use.