Hoststack report content

- Methodology section
- Align dynamic content structure with methodology section

Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I852c0f8147947dd8418de5fc2fdbd16a1c1e2057

diff --git a/docs/report/introduction/methodology_hoststack_testing/index.rst b/docs/report/introduction/methodology_hoststack_testing/index.rst
index 5feb9cc..7750097 100644 (file)
--- a/docs/report/introduction/methodology_hoststack_testing/index.rst
+++ b/docs/report/introduction/methodology_hoststack_testing/index.rst
@@ -4,4 +4,6 @@ Hoststack Testing
 .. toctree::
 
     methodology_tcp_with_iperf3
 .. toctree::
 
     methodology_tcp_with_iperf3

+    methodology_udp_with_iperf3

     methodology_quic_with_vppecho
     methodology_quic_with_vppecho

+    methodology_vsap_ab_with_nginx

diff --git a/docs/report/introduction/methodology_hoststack_testing/methodology_tcp_with_iperf3.rst b/docs/report/introduction/methodology_hoststack_testing/methodology_tcp_with_iperf3.rst
index ce22e34..e3fb85d 100644 (file)
--- a/docs/report/introduction/methodology_hoststack_testing/methodology_tcp_with_iperf3.rst
+++ b/docs/report/introduction/methodology_hoststack_testing/methodology_tcp_with_iperf3.rst
@@ -39,7 +39,7 @@ with the VPP Host Stack configured to utilize the Cubic TCP
 congestion algorithm.
 
 Note: iperf3 is single threaded, so it is expected that the 10 stream
 congestion algorithm.
 
 Note: iperf3 is single threaded, so it is expected that the 10 stream

-test does not show any performance improvement due to
+test shows little or no performance improvement due to

 multi-thread/multi-core execution.
 
 There are also variations of these test cases which use the VPP Network
 multi-thread/multi-core execution.
 
 There are also variations of these test cases which use the VPP Network

diff --git a/docs/report/introduction/methodology_hoststack_testing/methodology_udp_with_iperf3.rst b/docs/report/introduction/methodology_hoststack_testing/methodology_udp_with_iperf3.rst
new file mode 100644 (file)
index 0000000..b0525f9
--- /dev/null
+++ b/docs/report/introduction/methodology_hoststack_testing/methodology_udp_with_iperf3.rst
@@ -0,0 +1,42 @@
+UDP/IP with iperf3
+^^^^^^^^^^^^^^^^^^
+
+`iperf3 goodput measurement tool <https://github.com/esnet/iperf>`_
+is used for measuring the maximum attainable goodput of the VPP Host
+Stack connection across two instances of VPP running on separate DUT
+nodes. iperf3 is a popular open source tool for active measurements
+of the maximum achievable goodput on IP networks.
+
+Because iperf3 utilizes the POSIX socket interface APIs, the current
+test configuration utilizes the LD_PRELOAD mechanism in the linux
+kernel to connect iperf3 to the VPP Host Stack using the VPP
+Communications Library (VCL) LD_PRELOAD library (libvcl_ldpreload.so).
+
+In the future, a forked version of iperf3 which has been modified to
+directly use the VCL application APIs may be added to determine the
+difference in performance of 'VCL Native' applications versus utilizing
+LD_PRELOAD which inherently has more overhead and other limitations.
+
+The test configuration is as follows:
+
+::
+
+           DUT1              Network               DUT2
+    [ iperf3-client -> VPP1 ]=======[ VPP2 -> iperf3-server]
+
+where,
+
+1. iperf3 server attaches to VPP2 and LISTENs on VPP2:UDP port 5201.
+2. iperf3 client attaches to VPP1 and transmits one or more streams
+   of packets to VPP2:UDP port 5201.
+3. iperf3 client transmits a uni-directional stream as fast as the
+   VPP Host Stack allows to the iperf3 server for the test duration.
+4. At the end of the test the iperf3 client emits the goodput
+   measurements for all streams and the sum of all streams.
+
+Test cases include 1 and 10 Streams with a 20 second test duration
+with the VPP Host Stack using the UDP transport layer..
+
+Note: iperf3 is single threaded, so it is expected that the 10 stream
+test shows little or no performance improvement due to
+multi-thread/multi-core execution.

diff --git a/docs/report/introduction/methodology_hoststack_testing/methodology_vsap_ab_with_nginx.rst b/docs/report/introduction/methodology_hoststack_testing/methodology_vsap_ab_with_nginx.rst
new file mode 100644 (file)
index 0000000..6acfff1
--- /dev/null
+++ b/docs/report/introduction/methodology_hoststack_testing/methodology_vsap_ab_with_nginx.rst
@@ -0,0 +1,37 @@
+VSAP ab with nginx
+^^^^^^^^^^^^^^^^^^
+
+`VSAP (VPP Stack Acceleration Project) <https://wiki.fd.io/view/VSAP>`_
+aims to establish an industry user space application ecosystem based on
+the VPP hoststack.  As a pre-requisite to adapting open source applications
+using VPP Communications Library to accelerate performance, the VSAP team
+has introduced baseline tests utilizing the LD_PRELOAD mechanism to capture
+baseline performance data.
+
+`AB (Apache HTTP server benchmarking tool) <https://httpd.apache.org/docs/2.4/programs/ab.html>`_
+is used for measuring the maximum connections-per-second and requests-per-second.
+
+`NGINX <https://www.nginx.com/>`_ is a popular open source HTTP server
+application.  Because NGINX utilizes the POSIX socket interface APIs, the test
+configuration uses the LD_PRELOAD mechanism to connect NGINX to the VPP
+Hoststack using the VPP Communications Library (VCL) LD_PRELOAD library
+(libvcl_ldpreload.so).
+
+In the future, a version of NGINX which has been modified to
+directly use the VCL application APIs will be added to determine the
+difference in performance of 'VCL Native' applications versus utilizing
+LD_PRELOAD which inherently has more overhead and other limitations.
+
+The test configuration is as follows:
+
+::
+
+           TG     Network         DUT
+         [ AB ]=============[ VPP -> nginx ]
+
+where,
+
+1. nginx attaches to VPP and listens on TCP port 80
+2. ab runs CPS and RPS tests with packets flowing from the Test Generator node,
+   across 100G NICs, through VPP hoststack to NGINX.
+3. At the end of the tests, the results are reported by AB.

diff --git a/docs/report/vpp_performance_tests/hoststack_testing/index.rst b/docs/report/vpp_performance_tests/hoststack_testing/index.rst
index 1b02895..3691fb6 100644 (file)
--- a/docs/report/vpp_performance_tests/hoststack_testing/index.rst
+++ b/docs/report/vpp_performance_tests/hoststack_testing/index.rst
@@ -3,6 +3,7 @@ Hoststack Testing
 
 .. toctree::
 
 
 .. toctree::
 

-    iperf3/index
+    iperf3/tcp/index
+    iperf3/udp/index

     quic/index
     vsap/index
     quic/index
     vsap/index

diff --git a/docs/report/vpp_performance_tests/hoststack_testing/iperf3/index.rst b/docs/report/vpp_performance_tests/hoststack_testing/iperf3/tcp/index.rst
similarity index 71%
rename from docs/report/vpp_performance_tests/hoststack_testing/iperf3/index.rst
rename to docs/report/vpp_performance_tests/hoststack_testing/iperf3/tcp/index.rst
index 9d1a1bd..865a5f5 100644 (file)
--- a/docs/report/vpp_performance_tests/hoststack_testing/iperf3/index.rst
+++ b/docs/report/vpp_performance_tests/hoststack_testing/iperf3/tcp/index.rst
@@ -1,4 +1,3 @@
-

 .. raw:: latex
 
     \clearpage
 .. raw:: latex
 
     \clearpage


@@ -53,23 +52,3 @@ TCP/IP with iperf3
             \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{3n-skx-xxv710-1460b-2t1c-eth-ip4tcp-ldpreload-iperf3-bps}
             \label{fig:3n-skx-xxv710-1460b-2t1c-eth-ip4tcp-ldpreload-iperf3-bps}
     \end{figure}
             \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{3n-skx-xxv710-1460b-2t1c-eth-ip4tcp-ldpreload-iperf3-bps}
             \label{fig:3n-skx-xxv710-1460b-2t1c-eth-ip4tcp-ldpreload-iperf3-bps}
     \end{figure}

-
-.. raw:: latex
-
-    \clearpage
-
-1460b-2t1c-xxv710-ip4udp-base-scale
------------------------------------
-
-.. raw:: html
-
-    <iframe id="ifrm02" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../../_static/vpp/3n-skx-xxv710-1460b-2t1c-eth-ip4udp-ldpreload-iperf3-bps.html"></iframe>
-
-.. raw:: latex
-
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{3n-skx-xxv710-1460b-2t1c-eth-ip4udp-ldpreload-iperf3-bps}
-            \label{fig:3n-skx-xxv710-1460b-2t1c-eth-ip4udp-ldpreload-iperf3-bps}
-    \end{figure}

diff --git a/docs/report/vpp_performance_tests/hoststack_testing/iperf3/udp/index.rst b/docs/report/vpp_performance_tests/hoststack_testing/iperf3/udp/index.rst
new file mode 100644 (file)
index 0000000..605791d
--- /dev/null
+++ b/docs/report/vpp_performance_tests/hoststack_testing/iperf3/udp/index.rst
@@ -0,0 +1,54 @@
+.. raw:: latex
+
+    \clearpage
+
+.. raw:: html
+
+    <script type="text/javascript">
+
+        function getDocHeight(doc) {
+            doc = doc || document;
+            var body = doc.body, html = doc.documentElement;
+            var height = Math.max( body.scrollHeight, body.offsetHeight,
+                html.clientHeight, html.scrollHeight, html.offsetHeight );
+            return height;
+        }
+
+        function setIframeHeight(id) {
+            var ifrm = document.getElementById(id);
+            var doc = ifrm.contentDocument? ifrm.contentDocument:
+                ifrm.contentWindow.document;
+            ifrm.style.visibility = 'hidden';
+            ifrm.style.height = "10px"; // reset to minimal height ...
+            // IE opt. for bing/msn needs a bit added or scrollbar appears
+            ifrm.style.height = getDocHeight( doc ) + 4 + "px";
+            ifrm.style.visibility = 'visible';
+        }
+
+    </script>
+
+UDP/IP with iperf3
+~~~~~~~~~~~~~~~~~~
+
+.. todo::
+    Add introduction
+
+.. raw:: latex
+
+    \clearpage
+
+1460b-2t1c-xxv710-ip4udp-base-scale
+-----------------------------------
+
+.. raw:: html
+
+    <iframe id="ifrm02" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../../_static/vpp/3n-skx-xxv710-1460b-2t1c-eth-ip4udp-ldpreload-iperf3-bps.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{3n-skx-xxv710-1460b-2t1c-eth-ip4udp-ldpreload-iperf3-bps}
+            \label{fig:3n-skx-xxv710-1460b-2t1c-eth-ip4udp-ldpreload-iperf3-bps}
+    \end{figure}