CSIT-526 HC test: DHCP relay 06/5806/5
authorselias <samelias@cisco.com>
Fri, 17 Mar 2017 13:44:27 +0000 (14:44 +0100)
committerTibor Frank <tifrank@cisco.com>
Thu, 30 Mar 2017 09:48:01 +0000 (09:48 +0000)
Change-Id: I00d841bee1e5139a4530ce97d8bda17780caa0f1
Signed-off-by: selias <samelias@cisco.com>
resources/libraries/python/Dhcp.py
resources/libraries/python/honeycomb/DHCP.py [new file with mode: 0644]
resources/libraries/robot/honeycomb/dhcp.robot [new file with mode: 0644]
resources/templates/honeycomb/config_dhcp_relay.url [new file with mode: 0644]
resources/templates/vat/dhcp_proxy_dump.vat [new file with mode: 0644]
resources/test_data/honeycomb/dhcp_relay.py [new file with mode: 0644]
tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot [new file with mode: 0644]

index 93a9180..5f76e43 100644 (file)
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -73,3 +73,19 @@ class DhcpProxy(object):
         if output["retval"] != 0:
             raise RuntimeError('Unable to set DHCP proxy on node {}'
                                .format(vpp_node))
+
+    @staticmethod
+    def vpp_get_dhcp_proxy(node, ip_version):
+        """Retrieve DHCP relay configuration.
+
+        :param node: VPP node.
+        :param ip_version: IP protocol version: ipv4 or ipv6.
+        :type node: dict
+        :type ip_version: str
+        :returns: DHCP relay data.
+        :rtype: list
+        """
+
+        return VatExecutor.cmd_from_template(
+            node, "dhcp_proxy_dump.vat",
+            ipv6="ipv6" if ip_version == "ipv6" else "")
diff --git a/resources/libraries/python/honeycomb/DHCP.py b/resources/libraries/python/honeycomb/DHCP.py
new file mode 100644 (file)
index 0000000..3c03b14
--- /dev/null
@@ -0,0 +1,109 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Keywords to manipulate NAT configuration using Honeycomb REST API."""
+
+from resources.libraries.python.HTTPRequest import HTTPCodes
+from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
+from resources.libraries.python.honeycomb.HoneycombUtil \
+    import DataRepresentation
+from resources.libraries.python.honeycomb.HoneycombUtil \
+    import HoneycombUtil as HcUtil
+
+
+class DHCPRelayKeywords(object):
+    """Keywords for NAT configuration."""
+
+    def __init__(self):
+        pass
+
+    @staticmethod
+    def _set_dhcp_relay_properties(node, path, data=None):
+        """Set DHCP relay properties and check the return code.
+
+        :param node: Honeycomb node.
+        :param path: Path which is added to the base path to identify the data.
+        :param data: The new data to be set. If None, the item will be removed.
+        :type node: dict
+        :type path: str
+        :type data: dict
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the status code in response is not
+        200 = OK or 201 = ACCEPTED.
+        """
+
+        if data:
+            status_code, resp = HcUtil. \
+                put_honeycomb_data(node, "config_dhcp_relay", data, path,
+                                   data_representation=DataRepresentation.JSON)
+        else:
+            status_code, resp = HcUtil. \
+                delete_honeycomb_data(node, "config_dhcp_relay", path)
+
+        if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
+            raise HoneycombError(
+                "The configuration of DHCP relay was not successful. "
+                "Status code: {0}.".format(status_code))
+        return resp
+
+    @staticmethod
+    def add_dhcp_relay(node, data, ip_version, entry_id):
+        """Add a DHCP relay entry to the list on entries.
+
+        :param node: Honeycomb node.
+        :param data: Configuration for the relay entry.
+        :param ip_version: IP protocol version, ipv4 or ipv6.
+        :param entry_id: Numeric ID.
+        :type node: dict
+        :type data: dict
+        :type ip_version: str
+        :type entry_id: int
+        :returns: Content of response.
+        :rtype: bytearray
+        """
+
+        path = "/relay/dhcp:{0}/{1}".format(ip_version, entry_id)
+
+        return DHCPRelayKeywords._set_dhcp_relay_properties(node, path, data)
+
+    @staticmethod
+    def clear_dhcp_relay_configuration(node):
+        """Remove all DHCP relay configuration from the node.
+
+        :param node: Honeycomb node.
+        :type node: dict
+        :returns: Content of response.
+        :rtype: bytearray
+        """
+        return DHCPRelayKeywords._set_dhcp_relay_properties(node, "")
+
+    @staticmethod
+    def get_dhcp_relay_oper_data(node):
+        """Get operational data about the DHCP relay feature.
+
+        :param node: Honeycomb node.
+        :type node: dict
+        :returns: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the status code in response is not 200 = OK.
+        """
+
+        status_code, resp = HcUtil. \
+            get_honeycomb_data(node, "config_dhcp_relay")
+
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Could not retrieve DHCP relay configuration. "
+                "Status code: {0}.".format(status_code))
+        return resp
diff --git a/resources/libraries/robot/honeycomb/dhcp.robot b/resources/libraries/robot/honeycomb/dhcp.robot
new file mode 100644 (file)
index 0000000..d3fe942
--- /dev/null
@@ -0,0 +1,94 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.honeycomb.DHCP.DHCPRelayKeywords
+| Library | resources.libraries.python.Dhcp.DhcpProxy
+| Documentation | Keywords used to test Honeycomb DHCP features.
+
+*** Keywords ***
+| DHCP relay configuration from Honeycomb should be empty
+| | [Documentation] | Uses Honeycomb API to retrieve DHCP relay configuration\
+| | ... | and expects to fail.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| DHCP relay configuration from Honeycomb should be empty \
+| | ... | \| ${nodes['DUT1']} \|
+| | [Arguments] | ${node}
+| | Run keyword and expect error | *Status code: 404*
+| | ... | Get DHCP relay oper data | ${node}
+
+| Log DHCP relay configuration from VAT
+| | [Documentation] | Uses VAT to retrieve DHCP relay configuration from VPP.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Log DHCP relay configuration from VAT \
+| | ... | \| ${nodes['DUT1']} \| ipv4 \|
+| | [Arguments] | ${node} | ${ip_version}
+| | VPP get DHCP proxy | ${node} | ${ip_version}
+
+| Honeycomb configures DHCP relay
+| | [Documentation] | Uses Honeycomb API to configure DHCP relay.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - data - settings for the DHCP relay. Type: dictionary
+| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string
+| | ... | - vrf - vrf ID to configure DHCP on. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb configures DHCP relay \| ${nodes['DUT1']} \| ${data} \
+| | ... | \| ipv4 \| ${0} \|
+| | [Arguments] | ${node} | ${data} | ${ip_version} | ${vrf}
+| | Add DHCP relay | ${node} | ${data} | ${ip_version} | ${vrf}
+
+| Honeycomb clears DHCP relay configuration
+| | [Documentation] | Uses Honeycomb API to delete all configured DHCP relays.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb clears DHCP relay configuration \| ${nodes['DUT1']} \|
+| | [Arguments] | ${node}
+| | Clear DHCP relay configuration | ${node}
+
+| DHCP relay configuration from Honeycomb should contain
+| | [Documentation] | Retrieves oper data for DHCP relay and compares\
+| | ... | with provided values.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - data - expected DHCP relay settings. Type dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| DHCP relay configuration from Honeycomb should contain \
+| | ... | \| ${nodes['DUT1']} \| ${data} \|
+| | [Arguments] | ${node} | ${data}
+| | ${oper_data}= | Get DHCP relay oper data | ${node}
+| | ${oper_data}= | Set Variable | ${oper_data['relays']['relay'][0]}
+| | Sort List | ${oper_data['server']}
+| | Sort List | ${data['server']}
+| | Should be equal | ${oper_data} | ${data}
diff --git a/resources/templates/honeycomb/config_dhcp_relay.url b/resources/templates/honeycomb/config_dhcp_relay.url
new file mode 100644 (file)
index 0000000..81ab02e
--- /dev/null
@@ -0,0 +1 @@
+/restconf/config{odl_url_part}/dhcp:dhcp/relays
\ No newline at end of file
diff --git a/resources/templates/vat/dhcp_proxy_dump.vat b/resources/templates/vat/dhcp_proxy_dump.vat
new file mode 100644 (file)
index 0000000..584a58b
--- /dev/null
@@ -0,0 +1 @@
+dhcp_proxy_dump {ipv6}
diff --git a/resources/test_data/honeycomb/dhcp_relay.py b/resources/test_data/honeycomb/dhcp_relay.py
new file mode 100644 (file)
index 0000000..f5cb4a1
--- /dev/null
@@ -0,0 +1,122 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Test variables for DHCP relay test suite."""
+
+# IPv4 addresses used in traffic tests
+dut_to_tg_if1_ip = "172.16.0.1"
+dut_to_tg_if2_ip = "192.168.0.1"
+dhcp_server1_ip = "192.168.0.100"
+dhcp_server2_ip = "192.168.0.101"
+client_ip = "172.16.0.2"
+prefix_length = 24
+
+# IPv6 addresses used in traffic tests
+dut_to_tg_if1_ip6 = "3ffe:62::1"
+dut_to_tg_if2_ip6 = "3ffe:63::1"
+dhcp_server_ip6 = "3ffe:63::2"
+client_ip6 = "3ffe:62::2"
+prefix_length_v6 = 64
+
+# DHCP relay configuration
+relay1 = {
+    "relay": [
+        {
+            "address-type": "ipv4",
+            "rx-vrf-id": 0,
+            "gateway-address": dut_to_tg_if1_ip,
+            "server": [
+                {
+                    "vrf-id": 0,
+                    "address": dhcp_server1_ip
+                },
+            ]
+        }
+    ]
+}
+
+relay1_oper = {
+    "address-type": "dhcp:ipv4",
+    "rx-vrf-id": 0,
+    "gateway-address": dut_to_tg_if1_ip,
+    "server": [
+        {
+            "vrf-id": 0,
+            "address": dhcp_server1_ip
+        }
+    ]
+}
+
+relay2 = {
+    "relay": [
+        {
+            "address-type": "ipv4",
+            "rx-vrf-id": 0,
+            "gateway-address": dut_to_tg_if1_ip,
+            "server": [
+                {
+                    "vrf-id": 0,
+                    "address": dhcp_server1_ip
+                },
+                {
+                    "vrf-id": 0,
+                    "address": dhcp_server2_ip
+                },
+            ]
+        }
+    ]
+}
+
+relay2_oper = {
+    "address-type": "dhcp:ipv4",
+    "rx-vrf-id": 0,
+    "gateway-address": dut_to_tg_if1_ip,
+    "server": [
+        {
+            "vrf-id": 0,
+            "address": dhcp_server1_ip
+        },
+        {
+            "vrf-id": 0,
+            "address": dhcp_server2_ip
+        }
+    ]
+}
+
+relay_v6 = {
+    "relay": [
+        {
+            "address-type": "ipv6",
+            "rx-vrf-id": 0,
+            "gateway-address": dut_to_tg_if1_ip6,
+            "server": [
+                {
+                    "vrf-id": 0,
+                    "address": dhcp_server_ip6
+                },
+            ]
+        }
+    ]
+}
+
+relay_v6_oper = {
+    "address-type": "dhcp:ipv6",
+    "rx-vrf-id": 0,
+    "gateway-address": dut_to_tg_if1_ip6,
+    "server": [
+        {
+            "vrf-id": 0,
+            "address": dhcp_server_ip6
+        }
+    ]
+}
diff --git a/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot
new file mode 100644 (file)
index 0000000..4405da1
--- /dev/null
@@ -0,0 +1,119 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/dhcp_proxy.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/dhcp.robot
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.IPv4Setup
+| Library | resources.libraries.python.IPv6Setup
+| Library | resources.libraries.python.IPv6Util
+| Library | resources.libraries.python.Routing
+| Variables | resources/test_data/honeycomb/dhcp_relay.py
+| Documentation | *Honeycomb DHCP relay test suite.*
+| Test Setup | Clear Packet Trace on All DUTs | ${nodes}
+| Suite Teardown | Restart Honeycomb and VPP | ${node}
+| Force Tags | honeycomb_sanity | honeycomb_odl
+
+*** Test Cases ***
+| TC01: Honeycomb can configure DHCP relay entry
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-DHCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 configure IP addresses\
+| | ... | neighbors and configure DHCP relay.
+| | ... | [Ver] Send DHCP packets from TG interface to DUT. Receive all packets\
+| | ... | on the second TG interface and verify required fields.
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Log DHCP relay configuration from VAT | ${node} | ipv4
+| | Given DHCP relay configuration from Honeycomb should be empty | ${node}
+| | When Honeycomb configures DHCP relay | ${node} | ${relay1} | ipv4 | ${0}
+| | Then DHCP relay configuration from Honeycomb should contain
+| | ... | ${node} | ${relay1_oper}
+| | When DHCP relay test setup
+| | Then Send DHCP Messages | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
+| | ... | ${dhcp_server1_ip} | ${tg_to_dut_if2_mac} | ${client_ip}
+| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_ip}
+
+| TC02: Honeycomb can remove DHCP relay entry
+| | [Documentation] | Remove DHCP relay configuration, and verify that\
+| | ... | it was removed.
+| | Given DHCP relay configuration from Honeycomb should contain
+| | ... | ${node} | ${relay1_oper}
+| | When Honeycomb clears DHCP relay configuration | ${node}
+| | Then DHCP relay configuration from Honeycomb should be empty | ${node}
+
+| TC03: Honeycomb can configure multiple DHCP relay servers.
+| | [Documentation] | Configure multiple DHCP relay servers and verify\
+| | ... | their configuration using operational data.
+| | [Teardown] | Honeycomb clears DHCP relay configuration | ${node}
+| | Given DHCP relay configuration from Honeycomb should be empty | ${node}
+| | And Honeycomb configures DHCP relay | ${node} | ${relay2} | ipv4 | ${0}
+| | Then DHCP relay configuration from Honeycomb should contain
+| | ... | ${node} | ${relay2_oper}
+
+| TC04: Honeycomb can configure DHCP relay entry with ipv6
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv6-DHCPv6.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 configure IP addresses\
+| | ... | neighbors and configure DHCP relay.
+| | ... | [Ver] Send DHCPv6 packets from TG interface to DUT. Receive all\
+| | ... | packets on the second TG interface and verify required fields.
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Log DHCP relay configuration from VAT | ${node} | ipv6
+| | ... | AND | Honeycomb clears DHCP relay configuration | ${node}
+| | Given DHCP relay configuration from Honeycomb should be empty | ${node}
+| | When Honeycomb configures DHCP relay | ${node} | ${relay_v6} | ipv6 | ${0}
+| | Then DHCP relay configuration from Honeycomb should contain
+| | ... | ${node} | ${relay_v6_oper}
+| | When DHCP relay test setup IPv6
+| | Then Send DHCPv6 Messages | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
+| | ... | ${dut_to_tg_if1_ip6} | ${dut_to_tg_if1_mac} | ${dhcp_server_ip6}
+| | ... | ${tg_to_dut_if2_mac} | ${tg_to_dut_if1_mac} |  ${dut_to_tg_if2_mac}
+
+*** Keywords ***
+| DHCP relay test setup
+| | Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
+| | Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
+| | Add ARP on DUT
+| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server1_ip} | ${tg_to_dut_if2_mac}
+| | Add ARP on DUT
+| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server2_ip} | ${tg_to_dut_if2_mac}
+| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | ${NONE} | local
+| | ... | ${FALSE} | ${NONE}
+
+| DHCP relay test setup IPv6
+| | Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Honeycomb sets interface ipv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_length_v6}
+| | Honeycomb sets interface ipv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_length_v6}
+| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server_ip6}
+| | ... | ${tg_to_dut_if2_mac}
+| | And VPP Route Add | ${dut_node} | ff02::1:2 | 128 | ${NONE} | local
+| | ... | ${FALSE} | ${NONE}

©2016 FD.io a Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation. Linux is a registered trademark of Linus Torvalds.
Please see our privacy policy and terms of use.