CSIT-577 HC Test: Scripts for test jobs using ODL client 63/6663/4
authorselias <samelias@cisco.com>
Wed, 10 May 2017 15:41:11 +0000 (17:41 +0200)
committerSamuel Eliáš <samelias@cisco.com>
Wed, 17 May 2017 07:54:09 +0000 (07:54 +0000)
ODL client can be used to translate Restconf requests into Netconf. This
way Honeycomb's Netconf interface can be tested using existing test cases.

 - add bootstrap scripts for verify and integration job
 - update __init__.robot to handle new {HC_ODL} variable

Change-Id: I7e156dab3d5434dff246bfd02090f3c6bea81b86
Signed-off-by: selias <samelias@cisco.com>
bootstrap-hc2vpp-integration-odl.sh [new file with mode: 0755]
bootstrap-hc2vpp-verify-odl.sh [new file with mode: 0755]
resources/libraries/python/HTTPRequest.py
resources/libraries/python/honeycomb/HoneycombSetup.py
resources/libraries/robot/honeycomb/honeycomb.robot
tests/func/honeycomb/__init__.robot

diff --git a/bootstrap-hc2vpp-integration-odl.sh b/bootstrap-hc2vpp-integration-odl.sh
new file mode 100755 (executable)
index 0000000..76adc83
--- /dev/null
@@ -0,0 +1,236 @@
+#!/bin/bash
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -x
+
+cat /etc/hostname
+cat /etc/hosts
+
+export DEBIAN_FRONTEND=noninteractive
+sudo apt-get -y update
+sudo apt-get -y install libpython2.7-dev python-virtualenv
+
+VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30")
+VIRL_SERVER=""
+
+VIRL_USERNAME=jenkins-in
+VIRL_PKEY=priv_key
+VIRL_SERVER_STATUS_FILE="status"
+VIRL_SERVER_EXPECTED_STATUS="PRODUCTION"
+
+STREAM=$1
+OS=$2
+ODL=$3
+
+if [ "${OS}" == "ubuntu1604" ]; then
+    VIRL_TOPOLOGY=double-ring-nested.xenial
+    VIRL_RELEASE=csit-ubuntu-16.04.1_2017-02-23_1.8
+elif [ "${OS}" == "centos7" ]; then
+    VIRL_TOPOLOGY=double-ring-nested.centos7
+    VIRL_RELEASE=csit-centos-7.3-1611_2017-02-23_1.4
+fi
+
+SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error"
+
+function ssh_do() {
+    echo
+    echo "### "  ssh $@
+    ssh ${SSH_OPTIONS} $@
+}
+
+rm -f ${VIRL_PKEY}
+cat > ${VIRL_PKEY} <<EOF
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----
+EOF
+chmod 600 ${VIRL_PKEY}
+
+#
+# Pick a random host from the array of VIRL servers, and attempt
+# to reach it and verify it's status.
+#
+# The server must be reachable, and have a "status" file with
+# the content "PRODUCTION", to be selected.
+#
+# If the server is not reachable, or does not have the correct
+# status, remove it from the array and start again.
+#
+# Abort if there are no more servers left in the array.
+#
+while [[ ! "$VIRL_SERVER" ]]
+do
+    num_hosts=${#VIRL_SERVERS[@]}
+    if [ $num_hosts == 0 ]
+    then
+        echo "No more VIRL candidate hosts available, failing."
+        exit 127
+    fi
+    element=$[ $RANDOM % $num_hosts ]
+    virl_server_candidate=${VIRL_SERVERS[$element]}
+    virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${virl_server_candidate} cat $VIRL_SERVER_STATUS_FILE 2>&1)
+    echo VIRL HOST $virl_server_candidate status is \"$virl_server_status\"
+    if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ]
+    then
+        # Candidate is in good status. Select this server.
+        VIRL_SERVER="$virl_server_candidate"
+    else
+        # Candidate is in bad status. Remove from array.
+        VIRL_SERVERS=("${VIRL_SERVERS[@]:0:$element}" "${VIRL_SERVERS[@]:$[$element+1]}")
+    fi
+done
+
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+# Download VPP and HC packages from the current branch
+echo Downloading packages...
+bash ${SCRIPT_DIR}/resources/tools/download_hc_pkgs.sh ${STREAM} ${OS}
+
+if [ "${OS}" == "centos7" ]; then
+    VPP_PKGS=(*.rpm)
+else
+    VPP_PKGS=(*.deb)
+fi
+echo ${VPP_PKGS[@]}
+VIRL_DIR_LOC="/tmp"
+VPP_PKGS_FULL=(${VPP_PKGS[@]})
+
+# Prepend directory location at remote host to package file list
+for index in "${!VPP_PKGS_FULL[@]}"; do
+    VPP_PKGS_FULL[${index}]=${VIRL_DIR_LOC}/${VPP_PKGS_FULL[${index}]}
+done
+
+echo "Updated file names: " ${VPP_PKGS_FULL[@]}
+
+cat ${VIRL_PKEY}
+
+# Copy the files to VIRL hosts
+DONE=""
+for index in "${!VIRL_SERVER[@]}"; do
+    # Do not copy files in case they have already been copied to the VIRL host
+    [[ "${DONE[@]}" =~ "${VIRL_SERVER[${index}]}" ]] && copy=0 || copy=1
+
+    if [ "${copy}" -eq "0" ]; then
+        echo "files have already been copied to the VIRL host ${VIRL_SERVER[${index}]}"
+    else
+        if [ "${OS}" == "centos7" ]; then
+            scp ${SSH_OPTIONS} *.rpm \
+                ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:${VIRL_DIR_LOC}/
+        else
+            scp ${SSH_OPTIONS} *.deb \
+                ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:${VIRL_DIR_LOC}/
+        fi
+         result=$?
+        if [ "${result}" -ne "0" ]; then
+            echo "Failed to copy files to VIRL host ${VIRL_SERVER[${index}]}"
+            echo ${result}
+            exit ${result}
+        else
+            echo "files successfully copied to the VIRL host ${VIRL_SERVER[${index}]}"
+        fi
+        DONE+=(${VIRL_SERVER[${index}]})
+    fi
+done
+
+# Start a simulation on VIRL server
+echo "Starting simulation on VIRL server"
+
+function stop_virl_simulation {
+    ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER}\
+        "stop-testcase ${VIRL_SID}"
+}
+
+VIRL_SID=$(ssh ${SSH_OPTIONS} \
+    ${VIRL_USERNAME}@${VIRL_SERVER} \
+    "start-testcase -c ${VIRL_TOPOLOGY} -r ${VIRL_RELEASE} ${VPP_PKGS_FULL[@]}")
+retval=$?
+if [ "${retval}" -ne "0" ]; then
+    echo "VIRL simulation start failed"
+    exit ${retval}
+fi
+
+if [[ ! "${VIRL_SID}" =~ session-[a-zA-Z0-9_]{6} ]]; then
+    echo "No VIRL session ID reported."
+    exit 127
+fi
+
+# Upon script exit, cleanup the simulation execution
+trap stop_virl_simulation EXIT
+echo ${VIRL_SID}
+
+ssh_do ${VIRL_USERNAME}@${VIRL_SERVER} cat /scratch/${VIRL_SID}/topology.yaml
+
+# Download the topology file from virl session
+scp ${SSH_OPTIONS} \
+    ${VIRL_USERNAME}@${VIRL_SERVER}:/scratch/${VIRL_SID}/topology.yaml \
+    topologies/enabled/topology.yaml
+
+retval=$?
+if [ "${retval}" -ne "0" ]; then
+    echo "Failed to copy topology file from VIRL simulation"
+    exit ${retval}
+fi
+
+virtualenv --system-site-packages env
+. env/bin/activate
+
+echo pip install
+pip install -r ${SCRIPT_DIR}/requirements.txt
+
+pykwalify -s ${SCRIPT_DIR}/resources/topology_schemas/3_node_topology.sch.yaml \
+          -s ${SCRIPT_DIR}/resources/topology_schemas/topology.sch.yaml \
+          -d ${SCRIPT_DIR}/topologies/enabled/topology.yaml \
+          -vvv
+
+if [ "$?" -ne "0" ]; then
+    echo "Topology schema validation failed."
+    echo "However, the tests will start."
+fi
+
+PYTHONPATH=`pwd` pybot -L TRACE -W 136\
+    -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology.yaml \
+    --suite "tests.func" \
+    --include HC_FUNC \
+    --exclude HC_REST_ONLY \
+    --noncritical EXPECTED_FAILING \
+    --variable HC_ODL:${ODL} \
+    tests/
+
+# Get Honeycomb log file from virl host
+scp ${SSH_OPTIONS} \
+    ${VIRL_USERNAME}@${VIRL_SERVER}:/scratch/${VIRL_SID}/honeycomb.log . || true
diff --git a/bootstrap-hc2vpp-verify-odl.sh b/bootstrap-hc2vpp-verify-odl.sh
new file mode 100755 (executable)
index 0000000..5bf1522
--- /dev/null
@@ -0,0 +1,235 @@
+#!/bin/bash
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -x
+
+cat /etc/hostname
+cat /etc/hosts
+
+export DEBIAN_FRONTEND=noninteractive
+sudo apt-get -y update
+sudo apt-get -y install libpython2.7-dev python-virtualenv
+
+VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30")
+VIRL_SERVER=""
+
+VIRL_USERNAME=jenkins-in
+VIRL_PKEY=priv_key
+VIRL_SERVER_STATUS_FILE="status"
+VIRL_SERVER_EXPECTED_STATUS="PRODUCTION"
+
+OS=$1
+ODL=$2
+
+if [ "${OS}" == "ubuntu1604" ]; then
+    VIRL_TOPOLOGY=double-ring-nested.xenial
+    VIRL_RELEASE=csit-ubuntu-16.04.1_2017-02-23_1.8
+elif [ "${OS}" == "centos7" ]; then
+    VIRL_TOPOLOGY=double-ring-nested.centos7
+    VIRL_RELEASE=csit-centos-7.3-1611_2017-02-23_1.4
+fi
+
+SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error"
+
+function ssh_do() {
+    echo
+    echo "### "  ssh $@
+    ssh ${SSH_OPTIONS} $@
+}
+
+rm -f ${VIRL_PKEY}
+cat > ${VIRL_PKEY} <<EOF
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----
+EOF
+chmod 600 ${VIRL_PKEY}
+
+#
+# Pick a random host from the array of VIRL servers, and attempt
+# to reach it and verify it's status.
+#
+# The server must be reachable, and have a "status" file with
+# the content "PRODUCTION", to be selected.
+#
+# If the server is not reachable, or does not have the correct
+# status, remove it from the array and start again.
+#
+# Abort if there are no more servers left in the array.
+#
+while [[ ! "$VIRL_SERVER" ]]
+do
+    num_hosts=${#VIRL_SERVERS[@]}
+    if [ $num_hosts == 0 ]
+    then
+        echo "No more VIRL candidate hosts available, failing."
+        exit 127
+    fi
+    element=$[ $RANDOM % $num_hosts ]
+    virl_server_candidate=${VIRL_SERVERS[$element]}
+    virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${virl_server_candidate} cat $VIRL_SERVER_STATUS_FILE 2>&1)
+    echo VIRL HOST $virl_server_candidate status is \"$virl_server_status\"
+    if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ]
+    then
+        # Candidate is in good status. Select this server.
+        VIRL_SERVER="$virl_server_candidate"
+    else
+        # Candidate is in bad status. Remove from array.
+        VIRL_SERVERS=("${VIRL_SERVERS[@]:0:$element}" "${VIRL_SERVERS[@]:$[$element+1]}")
+    fi
+done
+
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+# VPP, VPP plugin and Honeycomb packages should already be in working directory
+if [ "${OS}" == "centos7" ]; then
+    VPP_PKGS=(*.rpm)
+else
+    VPP_PKGS=(*.deb)
+fi
+echo ${VPP_PKGS[@]}
+VIRL_DIR_LOC="/tmp"
+VPP_PKGS_FULL=(${VPP_PKGS[@]})
+
+# Prepend directory location at remote host to package file list
+for index in "${!VPP_PKGS_FULL[@]}"; do
+    VPP_PKGS_FULL[${index}]=${VIRL_DIR_LOC}/${VPP_PKGS_FULL[${index}]}
+done
+
+echo "Updated file names: " ${VPP_PKGS_FULL[@]}
+
+cat ${VIRL_PKEY}
+
+# Copy the files to VIRL hosts
+DONE=""
+for index in "${!VIRL_SERVER[@]}"; do
+    # Do not copy files in case they have already been copied to the VIRL host
+    [[ "${DONE[@]}" =~ "${VIRL_SERVER[${index}]}" ]] && copy=0 || copy=1
+
+    if [ "${copy}" -eq "0" ]; then
+        echo "files have already been copied to the VIRL host ${VIRL_SERVER[${index}]}"
+    else
+        if [ "${OS}" == "centos7" ]; then
+            scp ${SSH_OPTIONS} *.rpm \
+                ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:${VIRL_DIR_LOC}/
+        else
+            scp ${SSH_OPTIONS} *.deb \
+                ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:${VIRL_DIR_LOC}/
+        fi
+         result=$?
+        if [ "${result}" -ne "0" ]; then
+            echo "Failed to copy files to VIRL host ${VIRL_SERVER[${index}]}"
+            echo ${result}
+            exit ${result}
+        else
+            echo "files successfully copied to the VIRL host ${VIRL_SERVER[${index}]}"
+        fi
+        DONE+=(${VIRL_SERVER[${index}]})
+    fi
+done
+
+# Start a simulation on VIRL server
+echo "Starting simulation on VIRL server"
+
+function stop_virl_simulation {
+    ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER}\
+        "stop-testcase ${VIRL_SID}"
+}
+
+VIRL_SID=$(ssh ${SSH_OPTIONS} \
+    ${VIRL_USERNAME}@${VIRL_SERVER} \
+    "start-testcase -c ${VIRL_TOPOLOGY} -r ${VIRL_RELEASE} ${VPP_PKGS_FULL[@]}")
+retval=$?
+if [ "${retval}" -ne "0" ]; then
+    echo "VIRL simulation start failed"
+    exit ${retval}
+fi
+
+if [[ ! "${VIRL_SID}" =~ session-[a-zA-Z0-9_]{6} ]]; then
+    echo "No VIRL session ID reported."
+    exit 127
+fi
+
+# Upon script exit, cleanup the simulation execution
+trap stop_virl_simulation EXIT
+echo ${VIRL_SID}
+
+ssh_do ${VIRL_USERNAME}@${VIRL_SERVER} cat /scratch/${VIRL_SID}/topology.yaml
+
+# Download the topology file from virl session
+scp ${SSH_OPTIONS} \
+    ${VIRL_USERNAME}@${VIRL_SERVER}:/scratch/${VIRL_SID}/topology.yaml \
+    topologies/enabled/topology.yaml
+
+retval=$?
+if [ "${retval}" -ne "0" ]; then
+    echo "Failed to copy topology file from VIRL simulation"
+    exit ${retval}
+fi
+
+virtualenv --system-site-packages env
+. env/bin/activate
+
+echo pip install
+pip install -r ${SCRIPT_DIR}/requirements.txt
+
+pykwalify -s ${SCRIPT_DIR}/resources/topology_schemas/3_node_topology.sch.yaml \
+          -s ${SCRIPT_DIR}/resources/topology_schemas/topology.sch.yaml \
+          -d ${SCRIPT_DIR}/topologies/enabled/topology.yaml \
+          -vvv
+
+if [ "$?" -ne "0" ]; then
+    echo "Topology schema validation failed."
+    echo "However, the tests will start."
+fi
+
+rm -rf ~/*karaf*
+cp /nfs/common/karaf_${ODL} ~
+
+PYTHONPATH=`pwd` pybot -L TRACE -W 136\
+    -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology.yaml \
+    --suite "tests.func" \
+    --include HC_FUNC \
+    --exclude HC_REST_ONLY \
+    --noncritical EXPECTED_FAILING \
+    --variable HC_ODL:${ODL} \
+    tests/
+
+# Get Honeycomb log file from virl host
+scp ${SSH_OPTIONS} \
+    ${VIRL_USERNAME}@${VIRL_SERVER}:/scratch/${VIRL_SID}/honeycomb.log . || true
index 9c64dbb..869078b 100644 (file)
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -179,9 +179,12 @@ class HTTPRequest(object):
         """
         timeout = kwargs["timeout"]
 
-        if BuiltIn().get_variable_value("${use_odl_client}"):
-            # TODO: node["honeycomb"]["odl_port"]
+        use_odl = BuiltIn().get_variable_value("${use_odl_client}")
+
+        if use_odl:
             port = 8181
+            # Using default ODL Restconf port
+            # TODO: add node["honeycomb"]["odl_port"] to topology, use it here
             odl_url_part = "/network-topology:network-topology/topology/" \
                            "topology-netconf/node/vpp/yang-ext:mount"
         else:
index 50fd1c9..d23b092 100644 (file)
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -432,33 +432,29 @@ class HoneycombSetup(object):
                                      "node {0}, {1}".format(node, stderr))
 
     @staticmethod
-    def find_odl_client(node):
-        """Check if there is a karaf directory in home.
+    def setup_odl_client(node, odl_name):
+        """Start ODL client on the specified node.
 
-        :param node: Honeycomb node.
+        Karaf should be located in /nfs/common, and VPP and Honeycomb should
+        already be running, otherwise the start will fail.
+        :param node: Node to start ODL client on.
+        :param odl_name: Name of ODL client version to use.
         :type node: dict
-        :returns: True if ODL client is present on node, else False.
-        :rtype: bool
+        :type odl_name: str
+        :raises HoneycombError: If Honeycomb fails to start.
         """
 
+        logger.debug("Copying ODL Client to home dir.")
+
         ssh = SSH()
         ssh.connect(node)
-        (ret_code, stdout, _) = ssh.exec_command_sudo(
-            "ls ~ | grep karaf")
 
-        logger.debug(stdout)
-        return not bool(ret_code)
+        cmd = "cp -r /nfs/common/*karaf_{name}* ~/karaf".format(name=odl_name)
 
-    @staticmethod
-    def start_odl_client(node):
-        """Start ODL client on the specified node.
-
-        karaf should be located in home directory, and VPP and Honeycomb should
-        already be running, otherwise the start will fail.
-        :param node: Nodes to start ODL client on.
-        :type node: dict
-        :raises HoneycombError: If Honeycomb fails to start.
-        """
+        (ret_code, _, _) = ssh.exec_command_sudo(cmd)
+        if int(ret_code) != 0:
+            raise HoneycombError(
+                "Failed to copy ODL client on node {0}".format(node["host"]))
 
         logger.console("\nStarting ODL client ...")
 
index 7813ee2..336039e 100644 (file)
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,9 +85,9 @@
 | | ... | \| Restart Honeycomb and VPP and clear persisted configuration \
 | | ... | \| ${nodes['DUT1']} \|
 | | [Arguments] | ${node}
+| | Log | Performing clean restart of Honeycomb and VPP. | console=True
 | | Stop Honeycomb service on DUTs | ${node}
 | | Clear persisted Honeycomb configuration | ${node}
-| | Log | Persistence files cleared. | console=True
 | | Setup DUT | ${node}
 | | Setup Honeycomb service on DUTs | ${node}
 
 | | ...
 | | ... | \| Restart Honeycomb and VPP \| ${nodes['DUT1']} \|
 | | [Arguments] | ${node}
+| | Log | Performing clean restart of Honeycomb and VPP. | console=True
 | | Restart Honeycomb and VPP on DUTs | ${node}
 | | Wait until keyword succeeds | 4min | 16sec
 | | ... | Check honeycomb startup state | ${node}
 | | [Arguments] | ${node}
 | | Archive Honeycomb log | ${node}
 
-| Find ODL client on node
-| | [Arguments] | ${node}
-| | ${odl_present}= | Find ODL Client | ${node}
-| | Return from keyword | ${odl_present}
-
-| Start ODL client on node
-| | [Arguments] | ${node}
-| | Start ODL client | ${node}
+| Setup ODL Client Service On DUT
+| | [Arguments] | ${node} | ${odl_name}
+| | Setup ODL client | ${node} | ${odl_name}
 | | Wait until keyword succeeds | 4min | 16sec
 | | ... | Mount Honeycomb on ODL | ${node}
 | | Wait until keyword succeeds | 2min | 16sec
index 39e78af..7e9d07a 100644 (file)
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -21,6 +21,7 @@
 | Resource | resources/libraries/robot/honeycomb/honeycomb.robot
 | Suite Setup | Run Keywords | Setup All DUTs Before Test | AND
 | ... | Configure Honeycomb for testing | ${node} | AND
+| ... | Configure ODL Client for testing | ${node} | AND
 | ... | Set Global Variable | ${node}
 | Suite Teardown
 | ... | Archive Honeycomb log file | ${node}
 | | Configure jVPP timeout | ${node} | ${14}
 | | Clear Persisted Honeycomb Configuration | ${node}
 | | Setup Honeycomb Service On DUTs | ${node}
-| | ${use_odl_client}= | Find ODL client on node | ${node}
-| | Set Global Variable | ${use_odl_client}
-| | Run Keyword If | ${use_odl_client}
-| | ... | Start ODL Client on node | ${node}
+
+| Configure ODL Client for testing
+| | [Arguments] | ${node}
+| | ${use_odl_client}= | Get Variable Value | ${HC_ODL}
+| | Run Keyword If | '${use_odl_client}' != ${NONE}
+| | ... | Run Keywords
+| | ... | Set Global Variable | ${use_odl_client} | AND
+| | ... | Setup ODL Client Service On DUT | ${node} | ${use_odl_client}
+| | ... | ELSE | Log | Variable HC_ODL is not present. Not using ODL.
+| | ... | level=INFO

©2016 FD.io a Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation. Linux is a registered trademark of Linus Torvalds.
Please see our privacy policy and terms of use.