Update CRC comments

+ Link to current stable build.
+ Remove policer comment (as it is already a devicetest).
+ Add nsim comment.
+ Include perftest tag pattern to run a drv-avf test.
+ Switch from 2n-skx to 2n-clx to test also rdma-core driver.
+ Add tag for vfio-pci driver for the rest of tag expressions.

Change-Id: Id2f2ee0525e27437166431045a174b3097dff52b
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

diff --git a/resources/api/vpp/supported_crcs.yaml b/resources/api/vpp/supported_crcs.yaml
index f7a943b..24dc45f 100644 (file)
--- a/resources/api/vpp/supported_crcs.yaml
+++ b/resources/api/vpp/supported_crcs.yaml
@@ -30,8 +30,8 @@
 # Use bash command "env LC_COLLATE=C sort -u" if not clear.
 
 # https://logs.fd.io/production/vex-yul-rot-jenkins-1
-# /vpp-merge-master-ubuntu1804/462/
-20.01-rc0~1011:
+# /vpp-merge-master-ubuntu1804/539/
+20.05-rc0~50:
     acl_add_replace: '0x13bc8539'  # dev
     acl_add_replace_reply: '0xac407b0c'  # dev
     acl_details: '0xf89d7a88'  # perf teardown
@@ -190,11 +190,12 @@
     nsim_configure_reply: '0xe8d4e804'  # perf
     nsim_output_feature_enable_disable: '0x3865946c'  # perf
     nsim_output_feature_enable_disable_reply: '0xe8d4e804'  # perf
+    # 4x^ tc01-9000B-1c-eth-ip4tcp-nsim-ldpreload-iperf3-bps
+    # ^ 3n: nsimAND1stream
     policer_add_del: '0xdfea2be8'  # dev
     policer_add_del_reply: '0xa177cef2'  # dev
     policer_classify_set_interface: '0xde7ad708'  # dev
     policer_classify_set_interface_reply: '0xe8d4e804'  # dev
-    # 4x^ tc01-64B-ethip4-ip4base-ipolicemarkbase-dev
     rdma_create: '0x076fe418'  # perf
     rdma_create_reply: '0x5383d31f'  # perf
     # 2x^ Any test with drv_rdma. Currently only available on 2n-clx.
@@ -281,19 +282,21 @@
 # TODO: Create an on-demand perf verify job with a tag expression
 # covering API calls used only in perf tests,
 # and maintain the expression as device test gets more coverage.
-# Currently 2 triggers are needed: 2n (with AVF) vs 3n (with hwcrypto):
+# Currently 2 triggers are needed: 2n (with RDMA) vs 3n (with hwcrypto):
 # csit-3n-hsw-perftest
-# mrrAND1cAND64bANDnic_intel-x710ANDip4fwdANDiaclANDacl10AND100_flows
-# mrrAND1cAND64bANDnic_intel-x710ANDnat44NOTscaleNOTsrc_user_1
-# mrrAND1cAND64bANDnic_intel-x710ANDdot1qANDl2bdmaclrnANDbaseANDmemif
-# mrrAND1cAND64bANDnic_intel-x710ANDl2xcfwdANDlbond_1lANDnf_testpmd
-# mrrAND1cAND64bANDnic_intel-x710ANDmacipANDacl1AND100_flows
-# mrrAND1cAND78bANDnic_intel-x710ANDsrv6_1sid
-# mrrAND1cAND64bANDnic_intel-xl710ANDipsechwANDtnl_1ANDaes_256_gcm
-# mrrAND1cAND64bANDnic_intel-x710ANDdot1adANDl2xcfwd
-# mrrAND1cAND64bANDnic_intel-x710ANDipsecANDlispgpe
-# csit-2n-skx-perftest
-# mrrAND1cAND64bANDnic_intel-x710ANDloadbalancer_nat4
+# mrrAND1cAND64bANDnic_intel-x710ANDdrv_vfio_pciANDip4fwdANDiaclANDacl10AND100_flows
+# mrrAND1cAND64bANDnic_intel-x710ANDdrv_vfio_pciANDnat44NOTscaleNOTsrc_user_1
+# mrrAND1cAND64bANDnic_intel-x710ANDdrv_vfio_pciANDdot1qANDl2bdmaclrnANDbaseANDmemif
+# mrrAND1cAND64bANDnic_intel-x710ANDdrv_vfio_pciANDl2xcfwdANDlbond_1lANDnf_testpmd
+# mrrAND1cAND64bANDnic_intel-x710ANDdrv_vfio_pciANDmacipANDacl1AND100_flows
+# mrrAND1cAND78bANDnic_intel-x710ANDdrv_vfio_pciANDsrv6_1sid
+# mrrAND1cAND64bANDnic_intel-xl710ANDdrv_vfio_pciANDipsechwANDtnl_1ANDaes_256_gcm
+# mrrAND1cAND64bANDnic_intel-x710ANDdrv_vfio_pciANDdot1adANDl2xcfwd
+# mrrAND1cAND64bANDnic_intel-x710ANDdrv_vfio_pciANDipsecANDlispgpe
+# nic_intel-x710ANDnsimAND1stream
+# csit-2n-clx-perftest
+# mrrAND1cAND64bANDdrv_rdma_coreANDloadbalancer_nat4
+# mrrAND1cAND64bANDnic_intel-x710ANDdrv_avfANDloadbalancer_nat4
 
 # TODO: Once device job has complete API coverage,
 # add a check to make sure each message was encountered;