1 .. SPDX-License-Identifier: BSD-3-Clause
2 Copyright(c) 2010-2014 Intel Corporation.
10 The main design objectives for the DPDK Packet Framework are:
12 * Provide standard methodology to build complex packet processing pipelines.
13 Provide reusable and extensible templates for the commonly used pipeline functional blocks;
15 * Provide capability to switch between pure software and hardware-accelerated implementations for the same pipeline functional block;
17 * Provide the best trade-off between flexibility and performance.
18 Hardcoded pipelines usually provide the best performance, but are not flexible,
19 while developing flexible frameworks is never a problem, but performance is usually low;
21 * Provide a framework that is logically similar to Open Flow.
26 Packet processing applications are frequently structured as pipelines of multiple stages,
27 with the logic of each stage glued around a lookup table.
28 For each incoming packet, the table defines the set of actions to be applied to the packet,
29 as well as the next stage to send the packet to.
31 The DPDK Packet Framework minimizes the development effort required to build packet processing pipelines
32 by defining a standard methodology for pipeline development,
33 as well as providing libraries of reusable templates for the commonly used pipeline blocks.
35 The pipeline is constructed by connecting the set of input ports with the set of output ports
36 through the set of tables in a tree-like topology.
37 As result of lookup operation for the current packet in the current table,
38 one of the table entries (on lookup hit) or the default table entry (on lookup miss)
39 provides the set of actions to be applied on the current packet,
40 as well as the next hop for the packet, which can be either another table, an output port or packet drop.
42 An example of packet processing pipeline is presented in :numref:`figure_figure32`:
46 .. figure:: img/figure32.*
48 Example of Packet Processing Pipeline where Input Ports 0 and 1
49 are Connected with Output Ports 0, 1 and 2 through Tables 0 and 1
58 :numref:`table_qos_19` is a non-exhaustive list of ports that can be implemented with the Packet Framework.
64 +---+------------------+---------------------------------------------------------------------------------------+
65 | # | Port type | Description |
67 +===+==================+=======================================================================================+
68 | 1 | SW ring | SW circular buffer used for message passing between the application threads. Uses |
69 | | | the DPDK rte_ring primitive. Expected to be the most commonly used type of |
72 +---+------------------+---------------------------------------------------------------------------------------+
73 | 2 | HW ring | Queue of buffer descriptors used to interact with NIC, switch or accelerator ports. |
74 | | | For NIC ports, it uses the DPDK rte_eth_rx_queue or rte_eth_tx_queue |
77 +---+------------------+---------------------------------------------------------------------------------------+
78 | 3 | IP reassembly | Input packets are either IP fragments or complete IP datagrams. Output packets are |
79 | | | complete IP datagrams. |
81 +---+------------------+---------------------------------------------------------------------------------------+
82 | 4 | IP fragmentation | Input packets are jumbo (IP datagrams with length bigger than MTU) or non-jumbo |
83 | | | packets. Output packets are non-jumbo packets. |
85 +---+------------------+---------------------------------------------------------------------------------------+
86 | 5 | Traffic manager | Traffic manager attached to a specific NIC output port, performing congestion |
87 | | | management and hierarchical scheduling according to pre-defined SLAs. |
89 +---+------------------+---------------------------------------------------------------------------------------+
90 | 6 | KNI | Send/receive packets to/from Linux kernel space. |
92 +---+------------------+---------------------------------------------------------------------------------------+
93 | 7 | Source | Input port used as packet generator. Similar to Linux kernel /dev/zero character |
96 +---+------------------+---------------------------------------------------------------------------------------+
97 | 8 | Sink | Output port used to drop all input packets. Similar to Linux kernel /dev/null |
98 | | | character device. |
100 +---+------------------+---------------------------------------------------------------------------------------+
101 | 9 | Sym_crypto | Output port used to extract DPDK Cryptodev operations from a fixed offset of the |
102 | | | packet and then enqueue to the Cryptodev PMD. Input port used to dequeue the |
103 | | | Cryptodev operations from the Cryptodev PMD and then retrieve the packets from them. |
104 +---+------------------+---------------------------------------------------------------------------------------+
109 Each port is unidirectional, i.e. either input port or output port.
110 Each input/output port is required to implement an abstract interface that
111 defines the initialization and run-time operation of the port.
112 The port abstract interface is described in.
116 .. table:: 20 Port Abstract Interface
118 +---+----------------+-----------------------------------------------------------------------------------------+
119 | # | Port Operation | Description |
121 +===+================+=========================================================================================+
122 | 1 | Create | Create the low-level port object (e.g. queue). Can internally allocate memory. |
124 +---+----------------+-----------------------------------------------------------------------------------------+
125 | 2 | Free | Free the resources (e.g. memory) used by the low-level port object. |
127 +---+----------------+-----------------------------------------------------------------------------------------+
128 | 3 | RX | Read a burst of input packets. Non-blocking operation. Only defined for input ports. |
130 +---+----------------+-----------------------------------------------------------------------------------------+
131 | 4 | TX | Write a burst of input packets. Non-blocking operation. Only defined for output ports. |
133 +---+----------------+-----------------------------------------------------------------------------------------+
134 | 5 | Flush | Flush the output buffer. Only defined for output ports. |
136 +---+----------------+-----------------------------------------------------------------------------------------+
144 :numref:`table_qos_21` is a non-exhaustive list of types of tables that can be implemented with the Packet Framework.
148 .. table:: Table Types
150 +---+----------------------------+-----------------------------------------------------------------------------+
151 | # | Table Type | Description |
153 +===+============================+=============================================================================+
154 | 1 | Hash table | Lookup key is n-tuple based. |
156 | | | Typically, the lookup key is hashed to produce a signature that is used to |
157 | | | identify a bucket of entries where the lookup key is searched next. |
159 | | | The signature associated with the lookup key of each input packet is either |
160 | | | read from the packet descriptor (pre-computed signature) or computed at |
161 | | | table lookup time. |
163 | | | The table lookup, add entry and delete entry operations, as well as any |
164 | | | other pipeline block that pre-computes the signature all have to use the |
165 | | | same hashing algorithm to generate the signature. |
167 | | | Typically used to implement flow classification tables, ARP caches, routing |
168 | | | table for tunnelling protocols, etc. |
170 +---+----------------------------+-----------------------------------------------------------------------------+
171 | 2 | Longest Prefix Match (LPM) | Lookup key is the IP address. |
173 | | | Each table entries has an associated IP prefix (IP and depth). |
175 | | | The table lookup operation selects the IP prefix that is matched by the |
176 | | | lookup key; in case of multiple matches, the entry with the longest prefix |
179 | | | Typically used to implement IP routing tables. |
181 +---+----------------------------+-----------------------------------------------------------------------------+
182 | 3 | Access Control List (ACLs) | Lookup key is 7-tuple of two VLAN/MPLS labels, IP destination address, |
183 | | | IP source addresses, L4 protocol, L4 destination port, L4 source port. |
185 | | | Each table entry has an associated ACL and priority. The ACL contains bit |
186 | | | masks for the VLAN/MPLS labels, IP prefix for IP destination address, IP |
187 | | | prefix for IP source addresses, L4 protocol and bitmask, L4 destination |
188 | | | port and bit mask, L4 source port and bit mask. |
190 | | | The table lookup operation selects the ACL that is matched by the lookup |
191 | | | key; in case of multiple matches, the entry with the highest priority wins. |
193 | | | Typically used to implement rule databases for firewalls, etc. |
195 +---+----------------------------+-----------------------------------------------------------------------------+
196 | 4 | Pattern matching search | Lookup key is the packet payload. |
198 | | | Table is a database of patterns, with each pattern having a priority |
201 | | | The table lookup operation selects the patterns that is matched by the |
202 | | | input packet; in case of multiple matches, the matching pattern with the |
203 | | | highest priority wins. |
205 +---+----------------------------+-----------------------------------------------------------------------------+
206 | 5 | Array | Lookup key is the table entry index itself. |
208 +---+----------------------------+-----------------------------------------------------------------------------+
213 Each table is required to implement an abstract interface that defines the initialization
214 and run-time operation of the table.
215 The table abstract interface is described in :numref:`table_qos_29_1`.
219 .. table:: Table Abstract Interface
221 +---+-----------------+----------------------------------------------------------------------------------------+
222 | # | Table operation | Description |
224 +===+=================+========================================================================================+
225 | 1 | Create | Create the low-level data structures of the lookup table. Can internally allocate |
228 +---+-----------------+----------------------------------------------------------------------------------------+
229 | 2 | Free | Free up all the resources used by the lookup table. |
231 +---+-----------------+----------------------------------------------------------------------------------------+
232 | 3 | Add entry | Add new entry to the lookup table. |
234 +---+-----------------+----------------------------------------------------------------------------------------+
235 | 4 | Delete entry | Delete specific entry from the lookup table. |
237 +---+-----------------+----------------------------------------------------------------------------------------+
238 | 5 | Lookup | Look up a burst of input packets and return a bit mask specifying the result of the |
239 | | | lookup operation for each packet: a set bit signifies lookup hit for the corresponding |
240 | | | packet, while a cleared bit a lookup miss. |
242 | | | For each lookup hit packet, the lookup operation also returns a pointer to the table |
243 | | | entry that was hit, which contains the actions to be applied on the packet and any |
244 | | | associated metadata. |
246 | | | For each lookup miss packet, the actions to be applied on the packet and any |
247 | | | associated metadata are specified by the default table entry preconfigured for lookup |
250 +---+-----------------+----------------------------------------------------------------------------------------+
259 Hash tables are important because the key lookup operation is optimized for speed:
260 instead of having to linearly search the lookup key through all the keys in the table,
261 the search is limited to only the keys stored in a single table bucket.
263 **Associative Arrays**
265 An associative array is a function that can be specified as a set of (key, value) pairs,
266 with each key from the possible set of input keys present at most once.
267 For a given associative array, the possible operations are:
269 #. *add (key, value)*: When no value is currently associated with *key*, then the (key, *value* ) association is created.
270 When *key* is already associated value *value0*, then the association (*key*, *value0*) is removed
271 and association *(key, value)* is created;
273 #. *delete key*: When no value is currently associated with *key*, this operation has no effect.
274 When *key* is already associated *value*, then association *(key, value)* is removed;
276 #. *lookup key*: When no value is currently associated with *key*, then this operation returns void value (lookup miss).
277 When *key* is associated with *value*, then this operation returns *value*.
278 The *(key, value)* association is not changed.
280 The matching criterion used to compare the input key against the keys in the associative array is *exact match*,
281 as the key size (number of bytes) and the key value (array of bytes) have to match exactly for the two keys under comparison.
285 A hash function deterministically maps data of variable length (key) to data of fixed size (hash value or key signature).
286 Typically, the size of the key is bigger than the size of the key signature.
287 The hash function basically compresses a long key into a short signature.
288 Several keys can share the same signature (collisions).
290 High quality hash functions have uniform distribution.
291 For large number of keys, when dividing the space of signature values into a fixed number of equal intervals (buckets),
292 it is desirable to have the key signatures evenly distributed across these intervals (uniform distribution),
293 as opposed to most of the signatures going into only a few of the intervals
294 and the rest of the intervals being largely unused (non-uniform distribution).
298 A hash table is an associative array that uses a hash function for its operation.
299 The reason for using a hash function is to optimize the performance of the lookup operation
300 by minimizing the number of table keys that have to be compared against the input key.
302 Instead of storing the (key, value) pairs in a single list, the hash table maintains multiple lists (buckets).
303 For any given key, there is a single bucket where that key might exist, and this bucket is uniquely identified based on the key signature.
304 Once the key signature is computed and the hash table bucket identified,
305 the key is either located in this bucket or it is not present in the hash table at all,
306 so the key search can be narrowed down from the full set of keys currently in the table
307 to just the set of keys currently in the identified table bucket.
309 The performance of the hash table lookup operation is greatly improved,
310 provided that the table keys are evenly distributed among the hash table buckets,
311 which can be achieved by using a hash function with uniform distribution.
312 The rule to map a key to its bucket can simply be to use the key signature (modulo the number of table buckets) as the table bucket ID:
314 *bucket_id = f_hash(key) % n_buckets;*
316 By selecting the number of buckets to be a power of two, the modulo operator can be replaced by a bitwise AND logical operation:
318 *bucket_id = f_hash(key) & (n_buckets - 1);*
320 considering *n_bits* as the number of bits set in *bucket_mask = n_buckets - 1*,
321 this means that all the keys that end up in the same hash table bucket have the lower *n_bits* of their signature identical.
322 In order to reduce the number of keys in the same bucket (collisions), the number of hash table buckets needs to be increased.
324 In packet processing context, the sequence of operations involved in hash table operations is described in :numref:`figure_figure33`:
328 .. figure:: img/figure33.*
330 Sequence of Steps for Hash Table Operations in a Packet Processing Context
337 **Flow Classification**
339 *Description:* The flow classification is executed at least once for each input packet.
340 This operation maps each incoming packet against one of the known traffic flows in the flow database that typically contains millions of flows.
342 *Hash table name:* Flow classification table
344 *Number of keys:* Millions
346 *Key format:* n-tuple of packet fields that uniquely identify a traffic flow/connection.
347 Example: DiffServ 5-tuple of (Source IP address, Destination IP address, L4 protocol, L4 protocol source port, L4 protocol destination port).
348 For IPv4 protocol and L4 protocols like TCP, UDP or SCTP, the size of the DiffServ 5-tuple is 13 bytes, while for IPv6 it is 37 bytes.
350 *Key value (key data):* actions and action meta-data describing what processing to be applied for the packets of the current flow.
351 The size of the data associated with each traffic flow can vary from 8 bytes to kilobytes.
353 **Address Resolution Protocol (ARP)**
355 *Description:* Once a route has been identified for an IP packet (so the output interface and the IP address of the next hop station are known),
356 the MAC address of the next hop station is needed in order to send this packet onto the next leg of the journey
357 towards its destination (as identified by its destination IP address).
358 The MAC address of the next hop station becomes the destination MAC address of the outgoing Ethernet frame.
360 *Hash table name:* ARP table
362 *Number of keys:* Thousands
364 *Key format:* The pair of (Output interface, Next Hop IP address), which is typically 5 bytes for IPv4 and 17 bytes for IPv6.
366 *Key value (key data):* MAC address of the next hop station (6 bytes).
371 :numref:`table_qos_22` lists the hash table configuration parameters shared by all different hash table types.
375 .. table:: Configuration Parameters Common for All Hash Table Types
377 +---+---------------------------+------------------------------------------------------------------------------+
378 | # | Parameter | Details |
380 +===+===========================+==============================================================================+
381 | 1 | Key size | Measured as number of bytes. All keys have the same size. |
383 +---+---------------------------+------------------------------------------------------------------------------+
384 | 2 | Key value (key data) size | Measured as number of bytes. |
386 +---+---------------------------+------------------------------------------------------------------------------+
387 | 3 | Number of buckets | Needs to be a power of two. |
389 +---+---------------------------+------------------------------------------------------------------------------+
390 | 4 | Maximum number of keys | Needs to be a power of two. |
392 +---+---------------------------+------------------------------------------------------------------------------+
393 | 5 | Hash function | Examples: jhash, CRC hash, etc. |
395 +---+---------------------------+------------------------------------------------------------------------------+
396 | 6 | Hash function seed | Parameter to be passed to the hash function. |
398 +---+---------------------------+------------------------------------------------------------------------------+
399 | 7 | Key offset | Offset of the lookup key byte array within the packet meta-data stored in |
400 | | | the packet buffer. |
402 +---+---------------------------+------------------------------------------------------------------------------+
407 On initialization, each hash table bucket is allocated space for exactly 4 keys.
408 As keys are added to the table, it can happen that a given bucket already has 4 keys when a new key has to be added to this bucket.
409 The possible options are:
411 #. **Least Recently Used (LRU) Hash Table.**
412 One of the existing keys in the bucket is deleted and the new key is added in its place.
413 The number of keys in each bucket never grows bigger than 4. The logic to pick the key to be dropped from the bucket is LRU.
414 The hash table lookup operation maintains the order in which the keys in the same bucket are hit, so every time a key is hit,
415 it becomes the new Most Recently Used (MRU) key, i.e. the last candidate for drop.
416 When a key is added to the bucket, it also becomes the new MRU key.
417 When a key needs to be picked and dropped, the first candidate for drop, i.e. the current LRU key, is always picked.
418 The LRU logic requires maintaining specific data structures per each bucket.
420 #. **Extendable Bucket Hash Table.**
421 The bucket is extended with space for 4 more keys.
422 This is done by allocating additional memory at table initialization time,
423 which is used to create a pool of free keys (the size of this pool is configurable and always a multiple of 4).
424 On key add operation, the allocation of a group of 4 keys only happens successfully within the limit of free keys,
425 otherwise the key add operation fails.
426 On key delete operation, a group of 4 keys is freed back to the pool of free keys
427 when the key to be deleted is the only key that was used within its group of 4 keys at that time.
428 On key lookup operation, if the current bucket is in extended state and a match is not found in the first group of 4 keys,
429 the search continues beyond the first group of 4 keys, potentially until all keys in this bucket are examined.
430 The extendable bucket logic requires maintaining specific data structures per table and per each bucket.
434 .. table:: Configuration Parameters Specific to Extendable Bucket Hash Table
436 +---+---------------------------+--------------------------------------------------+
437 | # | Parameter | Details |
439 +===+===========================+==================================================+
440 | 1 | Number of additional keys | Needs to be a power of two, at least equal to 4. |
442 +---+---------------------------+--------------------------------------------------+
445 Signature Computation
446 """""""""""""""""""""
448 The possible options for key signature computation are:
450 #. **Pre-computed key signature.**
451 The key lookup operation is split between two CPU cores.
452 The first CPU core (typically the CPU core that performs packet RX) extracts the key from the input packet,
453 computes the key signature and saves both the key and the key signature in the packet buffer as packet meta-data.
454 The second CPU core reads both the key and the key signature from the packet meta-data
455 and performs the bucket search step of the key lookup operation.
457 #. **Key signature computed on lookup ("do-sig" version).**
458 The same CPU core reads the key from the packet meta-data, uses it to compute the key signature
459 and also performs the bucket search step of the key lookup operation.
463 .. table:: Configuration Parameters Specific to Pre-computed Key Signature Hash Table
465 +---+------------------+-----------------------------------------------------------------------+
466 | # | Parameter | Details |
468 +===+==================+=======================================================================+
469 | 1 | Signature offset | Offset of the pre-computed key signature within the packet meta-data. |
471 +---+------------------+-----------------------------------------------------------------------+
473 Key Size Optimized Hash Tables
474 """"""""""""""""""""""""""""""
476 For specific key sizes, the data structures and algorithm of key lookup operation can be specially handcrafted for further performance improvements,
477 so following options are possible:
479 #. **Implementation supporting configurable key size.**
481 #. **Implementation supporting a single key size.**
482 Typical key sizes are 8 bytes and 16 bytes.
484 Bucket Search Logic for Configurable Key Size Hash Tables
485 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
487 The performance of the bucket search logic is one of the main factors influencing the performance of the key lookup operation.
488 The data structures and algorithm are designed to make the best use of Intel CPU architecture resources like:
489 cache memory space, cache memory bandwidth, external memory bandwidth, multiple execution units working in parallel,
490 out of order instruction execution, special CPU instructions, etc.
492 The bucket search logic handles multiple input packets in parallel.
493 It is built as a pipeline of several stages (3 or 4), with each pipeline stage handling two different packets from the burst of input packets.
494 On each pipeline iteration, the packets are pushed to the next pipeline stage: for the 4-stage pipeline,
495 two packets (that just completed stage 3) exit the pipeline,
496 two packets (that just completed stage 2) are now executing stage 3, two packets (that just completed stage 1) are now executing stage 2,
497 two packets (that just completed stage 0) are now executing stage 1 and two packets (next two packets to read from the burst of input packets)
498 are entering the pipeline to execute stage 0.
499 The pipeline iterations continue until all packets from the burst of input packets execute the last stage of the pipeline.
501 The bucket search logic is broken into pipeline stages at the boundary of the next memory access.
502 Each pipeline stage uses data structures that are stored (with high probability) into the L1 or L2 cache memory of the current CPU core and
503 breaks just before the next memory access required by the algorithm.
504 The current pipeline stage finalizes by prefetching the data structures required by the next pipeline stage,
505 so given enough time for the prefetch to complete,
506 when the next pipeline stage eventually gets executed for the same packets,
507 it will read the data structures it needs from L1 or L2 cache memory and thus avoid the significant penalty incurred by L2 or L3 cache memory miss.
509 By prefetching the data structures required by the next pipeline stage in advance (before they are used)
510 and switching to executing another pipeline stage for different packets,
511 the number of L2 or L3 cache memory misses is greatly reduced, hence one of the main reasons for improved performance.
512 This is because the cost of L2/L3 cache memory miss on memory read accesses is high, as usually due to data dependency between instructions,
513 the CPU execution units have to stall until the read operation is completed from L3 cache memory or external DRAM memory.
514 By using prefetch instructions, the latency of memory read accesses is hidden,
515 provided that it is preformed early enough before the respective data structure is actually used.
517 By splitting the processing into several stages that are executed on different packets (the packets from the input burst are interlaced),
518 enough work is created to allow the prefetch instructions to complete successfully (before the prefetched data structures are actually accessed) and
519 also the data dependency between instructions is loosened.
520 For example, for the 4-stage pipeline, stage 0 is executed on packets 0 and 1 and then,
521 before same packets 0 and 1 are used (i.e. before stage 1 is executed on packets 0 and 1),
522 different packets are used: packets 2 and 3 (executing stage 1), packets 4 and 5 (executing stage 2) and packets 6 and 7 (executing stage 3).
523 By executing useful work while the data structures are brought into the L1 or L2 cache memory, the latency of the read memory accesses is hidden.
524 By increasing the gap between two consecutive accesses to the same data structure, the data dependency between instructions is loosened;
525 this allows making the best use of the super-scalar and out-of-order execution CPU architecture,
526 as the number of CPU core execution units that are active (rather than idle or stalled due to data dependency constraints between instructions) is maximized.
528 The bucket search logic is also implemented without using any branch instructions.
529 This avoids the important cost associated with flushing the CPU core execution pipeline on every instance of branch misprediction.
531 Configurable Key Size Hash Table
532 """"""""""""""""""""""""""""""""
534 :numref:`figure_figure34`, :numref:`table_qos_25` and :numref:`table_qos_26` detail the main data structures used to implement configurable key size hash tables (either LRU or extendable bucket,
535 either with pre-computed signature or "do-sig").
539 .. figure:: img/figure34.*
541 Data Structures for Configurable Key Size Hash Tables
546 .. table:: Main Large Data Structures (Arrays) used for Configurable Key Size Hash Tables
548 +---+-------------------------+------------------------------+---------------------------+-------------------------------+
549 | # | Array name | Number of entries | Entry size (bytes) | Description |
551 +===+=========================+==============================+===========================+===============================+
552 | 1 | Bucket array | n_buckets (configurable) | 32 | Buckets of the hash table. |
554 +---+-------------------------+------------------------------+---------------------------+-------------------------------+
555 | 2 | Bucket extensions array | n_buckets_ext (configurable) | 32 | This array is only created |
556 | | | | | for extendable bucket tables. |
558 +---+-------------------------+------------------------------+---------------------------+-------------------------------+
559 | 3 | Key array | n_keys | key_size (configurable) | Keys added to the hash table. |
561 +---+-------------------------+------------------------------+---------------------------+-------------------------------+
562 | 4 | Data array | n_keys | entry_size (configurable) | Key values (key data) |
563 | | | | | associated with the hash |
564 | | | | | table keys. |
566 +---+-------------------------+------------------------------+---------------------------+-------------------------------+
570 .. table:: Field Description for Bucket Array Entry (Configurable Key Size Hash Tables)
572 +---+------------------+--------------------+------------------------------------------------------------------+
573 | # | Field name | Field size (bytes) | Description |
575 +===+==================+====================+==================================================================+
576 | 1 | Next Ptr/LRU | 8 | For LRU tables, this fields represents the LRU list for the |
577 | | | | current bucket stored as array of 4 entries of 2 bytes each. |
578 | | | | Entry 0 stores the index (0 .. 3) of the MRU key, while entry 3 |
579 | | | | stores the index of the LRU key. |
581 | | | | For extendable bucket tables, this field represents the next |
582 | | | | pointer (i.e. the pointer to the next group of 4 keys linked to |
583 | | | | the current bucket). The next pointer is not NULL if the bucket |
584 | | | | is currently extended or NULL otherwise. |
585 | | | | To help the branchless implementation, bit 0 (least significant |
586 | | | | bit) of this field is set to 1 if the next pointer is not NULL |
587 | | | | and to 0 otherwise. |
589 +---+------------------+--------------------+------------------------------------------------------------------+
590 | 2 | Sig[0 .. 3] | 4 x 2 | If key X (X = 0 .. 3) is valid, then sig X bits 15 .. 1 store |
591 | | | | the most significant 15 bits of key X signature and sig X bit 0 |
592 | | | | is set to 1. |
594 | | | | If key X is not valid, then sig X is set to zero. |
596 +---+------------------+--------------------+------------------------------------------------------------------+
597 | 3 | Key Pos [0 .. 3] | 4 x 4 | If key X is valid (X = 0 .. 3), then Key Pos X represents the |
598 | | | | index into the key array where key X is stored, as well as the |
599 | | | | index into the data array where the value associated with key X |
602 | | | | If key X is not valid, then the value of Key Pos X is undefined. |
604 +---+------------------+--------------------+------------------------------------------------------------------+
607 :numref:`figure_figure35` and :numref:`table_qos_27` detail the bucket search pipeline stages (either LRU or extendable bucket,
608 either with pre-computed signature or "do-sig").
609 For each pipeline stage, the described operations are applied to each of the two packets handled by that stage.
613 .. figure:: img/figure35.*
615 Bucket Search Pipeline for Key Lookup Operation (Configurable Key Size Hash
621 .. table:: Description of the Bucket Search Pipeline Stages (Configurable Key Size Hash Tables)
623 +---+---------------------------+------------------------------------------------------------------------------+
624 | # | Stage name | Description |
626 +===+===========================+==============================================================================+
627 | 0 | Prefetch packet meta-data | Select next two packets from the burst of input packets. |
629 | | | Prefetch packet meta-data containing the key and key signature. |
631 +---+---------------------------+------------------------------------------------------------------------------+
632 | 1 | Prefetch table bucket | Read the key signature from the packet meta-data (for extendable bucket hash |
633 | | | tables) or read the key from the packet meta-data and compute key signature |
634 | | | (for LRU tables). |
636 | | | Identify the bucket ID using the key signature. |
638 | | | Set bit 0 of the signature to 1 (to match only signatures of valid keys from |
641 | | | Prefetch the bucket. |
643 +---+---------------------------+------------------------------------------------------------------------------+
644 | 2 | Prefetch table key | Read the key signatures from the bucket. |
646 | | | Compare the signature of the input key against the 4 key signatures from the |
647 | | | packet. As result, the following is obtained: |
650 | | | = equal to TRUE if there was at least one signature match and to FALSE in |
651 | | | the case of no signature match; |
654 | | | = equal to TRUE is there were more than one signature matches (can be up to |
655 | | | 4 signature matches in the worst case scenario) and to FALSE otherwise; |
658 | | | = the index of the first key that produced signature match (only valid if |
659 | | | match is true). |
661 | | | For extendable bucket hash tables only, set |
663 | | | to TRUE if next pointer is valid. |
665 | | | Prefetch the bucket key indicated by |
669 | | | does not point to valid key valid). |
671 +---+---------------------------+------------------------------------------------------------------------------+
672 | 3 | Prefetch table data | Read the bucket key indicated by |
675 | | | Compare the bucket key against the input key. As result, the following is |
678 | | | = equal to TRUE if the two keys match and to FALSE otherwise. |
680 | | | Report input key as lookup hit only when both |
684 | | | are equal to TRUE and as lookup miss otherwise. |
686 | | | For LRU tables only, use branchless logic to update the bucket LRU list |
687 | | | (the current key becomes the new MRU) only on lookup hit. |
689 | | | Prefetch the key value (key data) associated with the current key (to avoid |
690 | | | branches, this is done on both lookup hit and miss). |
692 +---+---------------------------+------------------------------------------------------------------------------+
697 #. The pipelined version of the bucket search algorithm is executed only if there are at least 7 packets in the burst of input packets.
698 If there are less than 7 packets in the burst of input packets,
699 a non-optimized implementation of the bucket search algorithm is executed.
701 #. Once the pipelined version of the bucket search algorithm has been executed for all the packets in the burst of input packets,
702 the non-optimized implementation of the bucket search algorithm is also executed for any packets that did not produce a lookup hit,
703 but have the *match_many* flag set.
704 As result of executing the non-optimized version, some of these packets may produce a lookup hit or lookup miss.
705 This does not impact the performance of the key lookup operation,
706 as the probability of matching more than one signature in the same group of 4 keys or of having the bucket in extended state
707 (for extendable bucket hash tables only) is relatively small.
709 **Key Signature Comparison Logic**
711 The key signature comparison logic is described in :numref:`table_qos_28`.
715 .. table:: Lookup Tables for Match, Match_Many and Match_Pos
717 +----+------+---------------+--------------------+--------------------+
718 | # | mask | match (1 bit) | match_many (1 bit) | match_pos (2 bits) |
720 +----+------+---------------+--------------------+--------------------+
721 | 0 | 0000 | 0 | 0 | 00 |
723 +----+------+---------------+--------------------+--------------------+
724 | 1 | 0001 | 1 | 0 | 00 |
726 +----+------+---------------+--------------------+--------------------+
727 | 2 | 0010 | 1 | 0 | 01 |
729 +----+------+---------------+--------------------+--------------------+
730 | 3 | 0011 | 1 | 1 | 00 |
732 +----+------+---------------+--------------------+--------------------+
733 | 4 | 0100 | 1 | 0 | 10 |
735 +----+------+---------------+--------------------+--------------------+
736 | 5 | 0101 | 1 | 1 | 00 |
738 +----+------+---------------+--------------------+--------------------+
739 | 6 | 0110 | 1 | 1 | 01 |
741 +----+------+---------------+--------------------+--------------------+
742 | 7 | 0111 | 1 | 1 | 00 |
744 +----+------+---------------+--------------------+--------------------+
745 | 8 | 1000 | 1 | 0 | 11 |
747 +----+------+---------------+--------------------+--------------------+
748 | 9 | 1001 | 1 | 1 | 00 |
750 +----+------+---------------+--------------------+--------------------+
751 | 10 | 1010 | 1 | 1 | 01 |
753 +----+------+---------------+--------------------+--------------------+
754 | 11 | 1011 | 1 | 1 | 00 |
756 +----+------+---------------+--------------------+--------------------+
757 | 12 | 1100 | 1 | 1 | 10 |
759 +----+------+---------------+--------------------+--------------------+
760 | 13 | 1101 | 1 | 1 | 00 |
762 +----+------+---------------+--------------------+--------------------+
763 | 14 | 1110 | 1 | 1 | 01 |
765 +----+------+---------------+--------------------+--------------------+
766 | 15 | 1111 | 1 | 1 | 00 |
768 +----+------+---------------+--------------------+--------------------+
770 The input *mask* hash bit X (X = 0 .. 3) set to 1 if input signature is equal to bucket signature X and set to 0 otherwise.
771 The outputs *match*, *match_many* and *match_pos* are 1 bit, 1 bit and 2 bits in size respectively and their meaning has been explained above.
773 As displayed in :numref:`table_qos_29`, the lookup tables for *match* and *match_many* can be collapsed into a single 32-bit value and the lookup table for
774 *match_pos* can be collapsed into a 64-bit value.
775 Given the input *mask*, the values for *match*, *match_many* and *match_pos* can be obtained by indexing their respective bit array to extract 1 bit,
776 1 bit and 2 bits respectively with branchless logic.
780 .. table:: Collapsed Lookup Tables for Match, Match_Many and Match_Pos
782 +------------+------------------------------------------+-------------------+
783 | | Bit array | Hexadecimal value |
785 +------------+------------------------------------------+-------------------+
786 | match | 1111_1111_1111_1110 | 0xFFFELLU |
788 +------------+------------------------------------------+-------------------+
789 | match_many | 1111_1110_1110_1000 | 0xFEE8LLU |
791 +------------+------------------------------------------+-------------------+
792 | match_pos | 0001_0010_0001_0011__0001_0010_0001_0000 | 0x12131210LLU |
794 +------------+------------------------------------------+-------------------+
797 The pseudo-code for match, match_many and match_pos is::
799 match = (0xFFFELLU >> mask) & 1;
801 match_many = (0xFEE8LLU >> mask) & 1;
803 match_pos = (0x12131210LLU >> (mask << 1)) & 3;
805 Single Key Size Hash Tables
806 """""""""""""""""""""""""""
808 :numref:`figure_figure37`, :numref:`figure_figure38`, :numref:`table_qos_30` and :numref:`table_qos_31` detail the main data structures used to implement 8-byte and 16-byte key hash tables
809 (either LRU or extendable bucket, either with pre-computed signature or "do-sig").
813 .. figure:: img/figure37.*
815 Data Structures for 8-byte Key Hash Tables
820 .. figure:: img/figure38.*
822 Data Structures for 16-byte Key Hash Tables
827 .. table:: Main Large Data Structures (Arrays) used for 8-byte and 16-byte Key Size Hash Tables
829 +---+-------------------------+------------------------------+----------------------+------------------------------------+
830 | # | Array name | Number of entries | Entry size (bytes) | Description |
832 +===+=========================+==============================+======================+====================================+
833 | 1 | Bucket array | n_buckets (configurable) | *8-byte key size:* | Buckets of the hash table. |
835 | | | | 64 + 4 x entry_size | |
838 | | | | *16-byte key size:* | |
840 | | | | 128 + 4 x entry_size | |
842 +---+-------------------------+------------------------------+----------------------+------------------------------------+
843 | 2 | Bucket extensions array | n_buckets_ext (configurable) | *8-byte key size:* | This array is only created for |
844 | | | | | extendable bucket tables. |
846 | | | | 64 + 4 x entry_size | |
849 | | | | *16-byte key size:* | |
851 | | | | 128 + 4 x entry_size | |
853 +---+-------------------------+------------------------------+----------------------+------------------------------------+
857 .. table:: Field Description for Bucket Array Entry (8-byte and 16-byte Key Hash Tables)
859 +---+---------------+--------------------+-------------------------------------------------------------------------------+
860 | # | Field name | Field size (bytes) | Description |
862 +===+===============+====================+===============================================================================+
863 | 1 | Valid | 8 | Bit X (X = 0 .. 3) is set to 1 if key X is valid or to 0 otherwise. |
865 | | | | Bit 4 is only used for extendable bucket tables to help with the |
866 | | | | implementation of the branchless logic. In this case, bit 4 is set to 1 if |
867 | | | | next pointer is valid (not NULL) or to 0 otherwise. |
869 +---+---------------+--------------------+-------------------------------------------------------------------------------+
870 | 2 | Next Ptr/LRU | 8 | For LRU tables, this fields represents the LRU list for the current bucket |
871 | | | | stored as array of 4 entries of 2 bytes each. Entry 0 stores the index |
872 | | | | (0 .. 3) of the MRU key, while entry 3 stores the index of the LRU key. |
874 | | | | For extendable bucket tables, this field represents the next pointer (i.e. |
875 | | | | the pointer to the next group of 4 keys linked to the current bucket). The |
876 | | | | next pointer is not NULL if the bucket is currently extended or NULL |
879 +---+---------------+--------------------+-------------------------------------------------------------------------------+
880 | 3 | Key [0 .. 3] | 4 x key_size | Full keys. |
882 +---+---------------+--------------------+-------------------------------------------------------------------------------+
883 | 4 | Data [0 .. 3] | 4 x entry_size | Full key values (key data) associated with keys 0 .. 3. |
885 +---+---------------+--------------------+-------------------------------------------------------------------------------+
887 and detail the bucket search pipeline used to implement 8-byte and 16-byte key hash tables (either LRU or extendable bucket,
888 either with pre-computed signature or "do-sig").
889 For each pipeline stage, the described operations are applied to each of the two packets handled by that stage.
893 .. figure:: img/figure39.*
895 Bucket Search Pipeline for Key Lookup Operation (Single Key Size Hash
901 .. table:: Description of the Bucket Search Pipeline Stages (8-byte and 16-byte Key Hash Tables)
903 +---+---------------------------+-----------------------------------------------------------------------------+
904 | # | Stage name | Description |
906 +===+===========================+=============================================================================+
907 | 0 | Prefetch packet meta-data | #. Select next two packets from the burst of input packets. |
909 | | | #. Prefetch packet meta-data containing the key and key signature. |
911 +---+---------------------------+-----------------------------------------------------------------------------+
912 | 1 | Prefetch table bucket | #. Read the key signature from the packet meta-data (for extendable bucket |
913 | | | hash tables) or read the key from the packet meta-data and compute key |
914 | | | signature (for LRU tables). |
916 | | | #. Identify the bucket ID using the key signature. |
918 | | | #. Prefetch the bucket. |
920 +---+---------------------------+-----------------------------------------------------------------------------+
921 | 2 | Prefetch table data | #. Read the bucket. |
923 | | | #. Compare all 4 bucket keys against the input key. |
925 | | | #. Report input key as lookup hit only when a match is identified (more |
926 | | | than one key match is not possible) |
928 | | | #. For LRU tables only, use branchless logic to update the bucket LRU list |
929 | | | (the current key becomes the new MRU) only on lookup hit. |
931 | | | #. Prefetch the key value (key data) associated with the matched key (to |
932 | | | avoid branches, this is done on both lookup hit and miss). |
934 +---+---------------------------+-----------------------------------------------------------------------------+
938 #. The pipelined version of the bucket search algorithm is executed only if there are at least 5 packets in the burst of input packets.
939 If there are less than 5 packets in the burst of input packets, a non-optimized implementation of the bucket search algorithm is executed.
941 #. For extendable bucket hash tables only,
942 once the pipelined version of the bucket search algorithm has been executed for all the packets in the burst of input packets,
943 the non-optimized implementation of the bucket search algorithm is also executed for any packets that did not produce a lookup hit,
944 but have the bucket in extended state.
945 As result of executing the non-optimized version, some of these packets may produce a lookup hit or lookup miss.
946 This does not impact the performance of the key lookup operation,
947 as the probability of having the bucket in extended state is relatively small.
949 Pipeline Library Design
950 -----------------------
952 A pipeline is defined by:
954 #. The set of input ports;
956 #. The set of output ports;
958 #. The set of tables;
960 #. The set of actions.
962 The input ports are connected with the output ports through tree-like topologies of interconnected tables.
963 The table entries contain the actions defining the operations to be executed on the input packets and the packet flow within the pipeline.
965 Connectivity of Ports and Tables
966 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
968 To avoid any dependencies on the order in which pipeline elements are created,
969 the connectivity of pipeline elements is defined after all the pipeline input ports,
970 output ports and tables have been created.
972 General connectivity rules:
974 #. Each input port is connected to a single table. No input port should be left unconnected;
976 #. The table connectivity to other tables or to output ports is regulated by the next hop actions of each table entry and the default table entry.
977 The table connectivity is fluid, as the table entries and the default table entry can be updated during run-time.
979 * A table can have multiple entries (including the default entry) connected to the same output port.
980 A table can have different entries connected to different output ports.
981 Different tables can have entries (including default table entry) connected to the same output port.
983 * A table can have multiple entries (including the default entry) connected to another table,
984 in which case all these entries have to point to the same table.
985 This constraint is enforced by the API and prevents tree-like topologies from being created (allowing table chaining only),
986 with the purpose of simplifying the implementation of the pipeline run-time execution engine.
994 An action handler can be assigned to each input/output port to define actions to be executed on each input packet that is received by the port.
995 Defining the action handler for a specific input/output port is optional (i.e. the action handler can be disabled).
997 For input ports, the action handler is executed after RX function. For output ports, the action handler is executed before the TX function.
999 The action handler can decide to drop packets.
1004 Table Action Handler
1005 ^^^^^^^^^^^^^^^^^^^^
1007 An action handler to be executed on each input packet can be assigned to each table.
1008 Defining the action handler for a specific table is optional (i.e. the action handler can be disabled).
1010 The action handler is executed after the table lookup operation is performed and the table entry associated with each input packet is identified.
1011 The action handler can only handle the user-defined actions, while the reserved actions (e.g. the next hop actions) are handled by the Packet Framework.
1012 The action handler can decide to drop the input packet.
1017 The reserved actions are handled directly by the Packet Framework without the user being able to change their meaning
1018 through the table action handler configuration.
1019 A special category of the reserved actions is represented by the next hop actions, which regulate the packet flow between input ports,
1020 tables and output ports through the pipeline.
1021 :numref:`table_qos_33` lists the next hop actions.
1025 .. table:: Next Hop Actions (Reserved)
1027 +---+---------------------+-----------------------------------------------------------------------------------+
1028 | # | Next hop action | Description |
1030 +===+=====================+===================================================================================+
1031 | 1 | Drop | Drop the current packet. |
1033 +---+---------------------+-----------------------------------------------------------------------------------+
1034 | 2 | Send to output port | Send the current packet to specified output port. The output port ID is metadata |
1035 | | | stored in the same table entry. |
1037 +---+---------------------+-----------------------------------------------------------------------------------+
1038 | 3 | Send to table | Send the current packet to specified table. The table ID is metadata stored in |
1039 | | | the same table entry. |
1041 +---+---------------------+-----------------------------------------------------------------------------------+
1046 For each table, the meaning of user actions is defined through the configuration of the table action handler.
1047 Different tables can be configured with different action handlers, therefore the meaning of the user actions
1048 and their associated meta-data is private to each table.
1049 Within the same table, all the table entries (including the table default entry) share the same definition
1050 for the user actions and their associated meta-data,
1051 with each table entry having its own set of enabled user actions and its own copy of the action meta-data.
1052 :numref:`table_qos_34` contains a non-exhaustive list of user action examples.
1056 .. table:: User Action Examples
1058 +---+-----------------------------------+---------------------------------------------------------------------+
1059 | # | User action | Description |
1061 +===+===================================+=====================================================================+
1062 | 1 | Metering | Per flow traffic metering using the srTCM and trTCM algorithms. |
1064 +---+-----------------------------------+---------------------------------------------------------------------+
1065 | 2 | Statistics | Update the statistics counters maintained per flow. |
1067 +---+-----------------------------------+---------------------------------------------------------------------+
1068 | 3 | App ID | Per flow state machine fed by variable length sequence of packets |
1069 | | | at the flow initialization with the purpose of identifying the |
1070 | | | traffic type and application. |
1072 +---+-----------------------------------+---------------------------------------------------------------------+
1073 | 4 | Push/pop labels | Push/pop VLAN/MPLS labels to/from the current packet. |
1075 +---+-----------------------------------+---------------------------------------------------------------------+
1076 | 5 | Network Address Translation (NAT) | Translate between the internal (LAN) and external (WAN) IP |
1077 | | | destination/source address and/or L4 protocol destination/source |
1080 +---+-----------------------------------+---------------------------------------------------------------------+
1081 | 6 | TTL update | Decrement IP TTL and, in case of IPv4 packets, update the IP |
1084 +---+-----------------------------------+---------------------------------------------------------------------+
1085 | 7 | Sym Crypto | Generate Cryptodev session based on the user-specified algorithm |
1086 | | | and key(s), and assemble the cryptodev operation based on the |
1087 | | | predefined offsets. |
1089 +---+-----------------------------------+---------------------------------------------------------------------+
1094 A complex application is typically split across multiple cores, with cores communicating through SW queues.
1095 There is usually a performance limit on the number of table lookups
1096 and actions that can be fitted on the same CPU core due to HW constraints like:
1097 available CPU cycles, cache memory size, cache transfer BW, memory transfer BW, etc.
1099 As the application is split across multiple CPU cores, the Packet Framework facilitates the creation of several pipelines,
1100 the assignment of each such pipeline to a different CPU core
1101 and the interconnection of all CPU core-level pipelines into a single application-level complex pipeline.
1102 For example, if CPU core A is assigned to run pipeline P1 and CPU core B pipeline P2,
1103 then the interconnection of P1 with P2 could be achieved by having the same set of SW queues act like output ports
1104 for P1 and input ports for P2.
1106 This approach enables the application development using the pipeline, run-to-completion (clustered) or hybrid (mixed) models.
1108 It is allowed for the same core to run several pipelines, but it is not allowed for several cores to run the same pipeline.
1110 Shared Data Structures
1111 ~~~~~~~~~~~~~~~~~~~~~~
1113 The threads performing table lookup are actually table writers rather than just readers.
1114 Even if the specific table lookup algorithm is thread-safe for multiple readers
1115 (e. g. read-only access of the search algorithm data structures is enough to conduct the lookup operation),
1116 once the table entry for the current packet is identified, the thread is typically expected to update the action meta-data stored in the table entry
1117 (e.g. increment the counter tracking the number of packets that hit this table entry), and thus modify the table entry.
1118 During the time this thread is accessing this table entry (either writing or reading; duration is application specific),
1119 for data consistency reasons, no other threads (threads performing table lookup or entry add/delete operations) are allowed to modify this table entry.
1121 Mechanisms to share the same table between multiple threads:
1123 #. **Multiple writer threads.**
1124 Threads need to use synchronization primitives like semaphores (distinct semaphore per table entry) or atomic instructions.
1125 The cost of semaphores is usually high, even when the semaphore is free.
1126 The cost of atomic instructions is normally higher than the cost of regular instructions.
1128 #. **Multiple writer threads, with single thread performing table lookup operations and multiple threads performing table entry add/delete operations.**
1129 The threads performing table entry add/delete operations send table update requests to the reader (typically through message passing queues),
1130 which does the actual table updates and then sends the response back to the request initiator.
1132 #. **Single writer thread performing table entry add/delete operations and multiple reader threads that perform table lookup operations with read-only access to the table entries.**
1133 The reader threads use the main table copy while the writer is updating the mirror copy.
1134 Once the writer update is done, the writer can signal to the readers and busy wait until all readers swaps between the mirror copy (which now becomes the main copy) and
1135 the mirror copy (which now becomes the main copy).
1137 Interfacing with Accelerators
1138 -----------------------------
1140 The presence of accelerators is usually detected during the initialization phase by inspecting the HW devices that are part of the system (e.g. by PCI bus enumeration).
1141 Typical devices with acceleration capabilities are:
1143 * Inline accelerators: NICs, switches, FPGAs, etc;
1145 * Look-aside accelerators: chipsets, FPGAs, Intel QuickAssist, etc.
1147 Usually, to support a specific functional block, specific implementation of Packet Framework tables and/or ports and/or actions has to be provided for each accelerator,
1148 with all the implementations sharing the same API: pure SW implementation (no acceleration), implementation using accelerator A, implementation using accelerator B, etc.
1149 The selection between these implementations could be done at build time or at run-time (recommended), based on which accelerators are present in the system,
1150 with no application changes required.
Code Review / deb_dpdk.git / blob