New upstream version 18.11-rc1
[deb_dpdk.git] / drivers / bus / pci / pci_common.c
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright(c) 2010-2014 Intel Corporation.
3  * Copyright 2013-2014 6WIND S.A.
4  */
5
6 #include <string.h>
7 #include <inttypes.h>
8 #include <stdint.h>
9 #include <stdbool.h>
10 #include <stdlib.h>
11 #include <stdio.h>
12 #include <sys/queue.h>
13 #include <sys/mman.h>
14
15 #include <rte_errno.h>
16 #include <rte_interrupts.h>
17 #include <rte_log.h>
18 #include <rte_bus.h>
19 #include <rte_pci.h>
20 #include <rte_bus_pci.h>
21 #include <rte_per_lcore.h>
22 #include <rte_memory.h>
23 #include <rte_eal.h>
24 #include <rte_string_fns.h>
25 #include <rte_common.h>
26 #include <rte_devargs.h>
27 #include <rte_vfio.h>
28
29 #include "private.h"
30
31
32 #define SYSFS_PCI_DEVICES "/sys/bus/pci/devices"
33
34 const char *rte_pci_get_sysfs_path(void)
35 {
36         const char *path = NULL;
37
38         path = getenv("SYSFS_PCI_DEVICES");
39         if (path == NULL)
40                 return SYSFS_PCI_DEVICES;
41
42         return path;
43 }
44
45 static struct rte_devargs *pci_devargs_lookup(struct rte_pci_device *dev)
46 {
47         struct rte_devargs *devargs;
48         struct rte_pci_addr addr;
49
50         RTE_EAL_DEVARGS_FOREACH("pci", devargs) {
51                 devargs->bus->parse(devargs->name, &addr);
52                 if (!rte_pci_addr_cmp(&dev->addr, &addr))
53                         return devargs;
54         }
55         return NULL;
56 }
57
58 void
59 pci_name_set(struct rte_pci_device *dev)
60 {
61         struct rte_devargs *devargs;
62
63         /* Each device has its internal, canonical name set. */
64         rte_pci_device_name(&dev->addr,
65                         dev->name, sizeof(dev->name));
66         devargs = pci_devargs_lookup(dev);
67         dev->device.devargs = devargs;
68         /* In blacklist mode, if the device is not blacklisted, no
69          * rte_devargs exists for it.
70          */
71         if (devargs != NULL)
72                 /* If an rte_devargs exists, the generic rte_device uses the
73                  * given name as its name.
74                  */
75                 dev->device.name = dev->device.devargs->name;
76         else
77                 /* Otherwise, it uses the internal, canonical form. */
78                 dev->device.name = dev->name;
79 }
80
81 /*
82  * Match the PCI Driver and Device using the ID Table
83  */
84 int
85 rte_pci_match(const struct rte_pci_driver *pci_drv,
86               const struct rte_pci_device *pci_dev)
87 {
88         const struct rte_pci_id *id_table;
89
90         for (id_table = pci_drv->id_table; id_table->vendor_id != 0;
91              id_table++) {
92                 /* check if device's identifiers match the driver's ones */
93                 if (id_table->vendor_id != pci_dev->id.vendor_id &&
94                                 id_table->vendor_id != PCI_ANY_ID)
95                         continue;
96                 if (id_table->device_id != pci_dev->id.device_id &&
97                                 id_table->device_id != PCI_ANY_ID)
98                         continue;
99                 if (id_table->subsystem_vendor_id !=
100                     pci_dev->id.subsystem_vendor_id &&
101                     id_table->subsystem_vendor_id != PCI_ANY_ID)
102                         continue;
103                 if (id_table->subsystem_device_id !=
104                     pci_dev->id.subsystem_device_id &&
105                     id_table->subsystem_device_id != PCI_ANY_ID)
106                         continue;
107                 if (id_table->class_id != pci_dev->id.class_id &&
108                                 id_table->class_id != RTE_CLASS_ANY_ID)
109                         continue;
110
111                 return 1;
112         }
113
114         return 0;
115 }
116
117 /*
118  * If vendor/device ID match, call the probe() function of the
119  * driver.
120  */
121 static int
122 rte_pci_probe_one_driver(struct rte_pci_driver *dr,
123                          struct rte_pci_device *dev)
124 {
125         int ret;
126         bool already_probed;
127         struct rte_pci_addr *loc;
128
129         if ((dr == NULL) || (dev == NULL))
130                 return -EINVAL;
131
132         loc = &dev->addr;
133
134         /* The device is not blacklisted; Check if driver supports it */
135         if (!rte_pci_match(dr, dev))
136                 /* Match of device and driver failed */
137                 return 1;
138
139         RTE_LOG(INFO, EAL, "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
140                         loc->domain, loc->bus, loc->devid, loc->function,
141                         dev->device.numa_node);
142
143         /* no initialization when blacklisted, return without error */
144         if (dev->device.devargs != NULL &&
145                 dev->device.devargs->policy ==
146                         RTE_DEV_BLACKLISTED) {
147                 RTE_LOG(INFO, EAL, "  Device is blacklisted, not"
148                         " initializing\n");
149                 return 1;
150         }
151
152         if (dev->device.numa_node < 0) {
153                 RTE_LOG(WARNING, EAL, "  Invalid NUMA socket, default to 0\n");
154                 dev->device.numa_node = 0;
155         }
156
157         already_probed = rte_dev_is_probed(&dev->device);
158         if (already_probed && !(dr->drv_flags & RTE_PCI_DRV_PROBE_AGAIN)) {
159                 RTE_LOG(DEBUG, EAL, "Device %s is already probed\n",
160                                 dev->device.name);
161                 return -EEXIST;
162         }
163
164         RTE_LOG(INFO, EAL, "  probe driver: %x:%x %s\n", dev->id.vendor_id,
165                 dev->id.device_id, dr->driver.name);
166
167         /*
168          * reference driver structure
169          * This needs to be before rte_pci_map_device(), as it enables to use
170          * driver flags for adjusting configuration.
171          */
172         if (!already_probed)
173                 dev->driver = dr;
174
175         if (!already_probed && (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING)) {
176                 /* map resources for devices that use igb_uio */
177                 ret = rte_pci_map_device(dev);
178                 if (ret != 0) {
179                         dev->driver = NULL;
180                         return ret;
181                 }
182         }
183
184         /* call the driver probe() function */
185         ret = dr->probe(dr, dev);
186         if (already_probed)
187                 return ret; /* no rollback if already succeeded earlier */
188         if (ret) {
189                 dev->driver = NULL;
190                 if ((dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) &&
191                         /* Don't unmap if device is unsupported and
192                          * driver needs mapped resources.
193                          */
194                         !(ret > 0 &&
195                                 (dr->drv_flags & RTE_PCI_DRV_KEEP_MAPPED_RES)))
196                         rte_pci_unmap_device(dev);
197         } else {
198                 dev->device.driver = &dr->driver;
199         }
200
201         return ret;
202 }
203
204 /*
205  * If vendor/device ID match, call the remove() function of the
206  * driver.
207  */
208 static int
209 rte_pci_detach_dev(struct rte_pci_device *dev)
210 {
211         struct rte_pci_addr *loc;
212         struct rte_pci_driver *dr;
213         int ret = 0;
214
215         if (dev == NULL)
216                 return -EINVAL;
217
218         dr = dev->driver;
219         loc = &dev->addr;
220
221         RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
222                         loc->domain, loc->bus, loc->devid,
223                         loc->function, dev->device.numa_node);
224
225         RTE_LOG(DEBUG, EAL, "  remove driver: %x:%x %s\n", dev->id.vendor_id,
226                         dev->id.device_id, dr->driver.name);
227
228         if (dr->remove) {
229                 ret = dr->remove(dev);
230                 if (ret < 0)
231                         return ret;
232         }
233
234         /* clear driver structure */
235         dev->driver = NULL;
236
237         if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING)
238                 /* unmap resources for devices that use igb_uio */
239                 rte_pci_unmap_device(dev);
240
241         return 0;
242 }
243
244 /*
245  * If vendor/device ID match, call the probe() function of all
246  * registered driver for the given device. Return < 0 if initialization
247  * failed, return 1 if no driver is found for this device.
248  */
249 static int
250 pci_probe_all_drivers(struct rte_pci_device *dev)
251 {
252         struct rte_pci_driver *dr = NULL;
253         int rc = 0;
254
255         if (dev == NULL)
256                 return -EINVAL;
257
258         FOREACH_DRIVER_ON_PCIBUS(dr) {
259                 rc = rte_pci_probe_one_driver(dr, dev);
260                 if (rc < 0)
261                         /* negative value is an error */
262                         return rc;
263                 if (rc > 0)
264                         /* positive value means driver doesn't support it */
265                         continue;
266                 return 0;
267         }
268         return 1;
269 }
270
271 /*
272  * Scan the content of the PCI bus, and call the probe() function for
273  * all registered drivers that have a matching entry in its id_table
274  * for discovered devices.
275  */
276 int
277 rte_pci_probe(void)
278 {
279         struct rte_pci_device *dev = NULL;
280         size_t probed = 0, failed = 0;
281         struct rte_devargs *devargs;
282         int probe_all = 0;
283         int ret = 0;
284
285         if (rte_pci_bus.bus.conf.scan_mode != RTE_BUS_SCAN_WHITELIST)
286                 probe_all = 1;
287
288         FOREACH_DEVICE_ON_PCIBUS(dev) {
289                 probed++;
290
291                 devargs = dev->device.devargs;
292                 /* probe all or only whitelisted devices */
293                 if (probe_all)
294                         ret = pci_probe_all_drivers(dev);
295                 else if (devargs != NULL &&
296                         devargs->policy == RTE_DEV_WHITELISTED)
297                         ret = pci_probe_all_drivers(dev);
298                 if (ret < 0) {
299                         if (ret != -EEXIST) {
300                                 RTE_LOG(ERR, EAL, "Requested device "
301                                         PCI_PRI_FMT " cannot be used\n",
302                                         dev->addr.domain, dev->addr.bus,
303                                         dev->addr.devid, dev->addr.function);
304                                 rte_errno = errno;
305                                 failed++;
306                         }
307                         ret = 0;
308                 }
309         }
310
311         return (probed && probed == failed) ? -1 : 0;
312 }
313
314 /* dump one device */
315 static int
316 pci_dump_one_device(FILE *f, struct rte_pci_device *dev)
317 {
318         int i;
319
320         fprintf(f, PCI_PRI_FMT, dev->addr.domain, dev->addr.bus,
321                dev->addr.devid, dev->addr.function);
322         fprintf(f, " - vendor:%x device:%x\n", dev->id.vendor_id,
323                dev->id.device_id);
324
325         for (i = 0; i != sizeof(dev->mem_resource) /
326                 sizeof(dev->mem_resource[0]); i++) {
327                 fprintf(f, "   %16.16"PRIx64" %16.16"PRIx64"\n",
328                         dev->mem_resource[i].phys_addr,
329                         dev->mem_resource[i].len);
330         }
331         return 0;
332 }
333
334 /* dump devices on the bus */
335 void
336 rte_pci_dump(FILE *f)
337 {
338         struct rte_pci_device *dev = NULL;
339
340         FOREACH_DEVICE_ON_PCIBUS(dev) {
341                 pci_dump_one_device(f, dev);
342         }
343 }
344
345 static int
346 pci_parse(const char *name, void *addr)
347 {
348         struct rte_pci_addr *out = addr;
349         struct rte_pci_addr pci_addr;
350         bool parse;
351
352         parse = (rte_pci_addr_parse(name, &pci_addr) == 0);
353         if (parse && addr != NULL)
354                 *out = pci_addr;
355         return parse == false;
356 }
357
358 /* register a driver */
359 void
360 rte_pci_register(struct rte_pci_driver *driver)
361 {
362         TAILQ_INSERT_TAIL(&rte_pci_bus.driver_list, driver, next);
363         driver->bus = &rte_pci_bus;
364 }
365
366 /* unregister a driver */
367 void
368 rte_pci_unregister(struct rte_pci_driver *driver)
369 {
370         TAILQ_REMOVE(&rte_pci_bus.driver_list, driver, next);
371         driver->bus = NULL;
372 }
373
374 /* Add a device to PCI bus */
375 void
376 rte_pci_add_device(struct rte_pci_device *pci_dev)
377 {
378         TAILQ_INSERT_TAIL(&rte_pci_bus.device_list, pci_dev, next);
379 }
380
381 /* Insert a device into a predefined position in PCI bus */
382 void
383 rte_pci_insert_device(struct rte_pci_device *exist_pci_dev,
384                       struct rte_pci_device *new_pci_dev)
385 {
386         TAILQ_INSERT_BEFORE(exist_pci_dev, new_pci_dev, next);
387 }
388
389 /* Remove a device from PCI bus */
390 static void
391 rte_pci_remove_device(struct rte_pci_device *pci_dev)
392 {
393         TAILQ_REMOVE(&rte_pci_bus.device_list, pci_dev, next);
394 }
395
396 static struct rte_device *
397 pci_find_device(const struct rte_device *start, rte_dev_cmp_t cmp,
398                 const void *data)
399 {
400         const struct rte_pci_device *pstart;
401         struct rte_pci_device *pdev;
402
403         if (start != NULL) {
404                 pstart = RTE_DEV_TO_PCI_CONST(start);
405                 pdev = TAILQ_NEXT(pstart, next);
406         } else {
407                 pdev = TAILQ_FIRST(&rte_pci_bus.device_list);
408         }
409         while (pdev != NULL) {
410                 if (cmp(&pdev->device, data) == 0)
411                         return &pdev->device;
412                 pdev = TAILQ_NEXT(pdev, next);
413         }
414         return NULL;
415 }
416
417 /*
418  * find the device which encounter the failure, by iterate over all device on
419  * PCI bus to check if the memory failure address is located in the range
420  * of the BARs of the device.
421  */
422 static struct rte_pci_device *
423 pci_find_device_by_addr(const void *failure_addr)
424 {
425         struct rte_pci_device *pdev = NULL;
426         uint64_t check_point, start, end, len;
427         int i;
428
429         check_point = (uint64_t)(uintptr_t)failure_addr;
430
431         FOREACH_DEVICE_ON_PCIBUS(pdev) {
432                 for (i = 0; i != RTE_DIM(pdev->mem_resource); i++) {
433                         start = (uint64_t)(uintptr_t)pdev->mem_resource[i].addr;
434                         len = pdev->mem_resource[i].len;
435                         end = start + len;
436                         if (check_point >= start && check_point < end) {
437                                 RTE_LOG(DEBUG, EAL, "Failure address %16.16"
438                                         PRIx64" belongs to device %s!\n",
439                                         check_point, pdev->device.name);
440                                 return pdev;
441                         }
442                 }
443         }
444         return NULL;
445 }
446
447 static int
448 pci_hot_unplug_handler(struct rte_device *dev)
449 {
450         struct rte_pci_device *pdev = NULL;
451         int ret = 0;
452
453         pdev = RTE_DEV_TO_PCI(dev);
454         if (!pdev)
455                 return -1;
456
457         switch (pdev->kdrv) {
458 #ifdef HAVE_VFIO_DEV_REQ_INTERFACE
459         case RTE_KDRV_VFIO:
460                 /*
461                  * vfio kernel module guaranty the pci device would not be
462                  * deleted until the user space release the resource, so no
463                  * need to remap BARs resource here, just directly notify
464                  * the req event to the user space to handle it.
465                  */
466                 rte_dev_event_callback_process(dev->name,
467                                                RTE_DEV_EVENT_REMOVE);
468                 break;
469 #endif
470         case RTE_KDRV_IGB_UIO:
471         case RTE_KDRV_UIO_GENERIC:
472         case RTE_KDRV_NIC_UIO:
473                 /* BARs resource is invalid, remap it to be safe. */
474                 ret = pci_uio_remap_resource(pdev);
475                 break;
476         default:
477                 RTE_LOG(DEBUG, EAL,
478                         "Not managed by a supported kernel driver, skipped\n");
479                 ret = -1;
480                 break;
481         }
482
483         return ret;
484 }
485
486 static int
487 pci_sigbus_handler(const void *failure_addr)
488 {
489         struct rte_pci_device *pdev = NULL;
490         int ret = 0;
491
492         pdev = pci_find_device_by_addr(failure_addr);
493         if (!pdev) {
494                 /* It is a generic sigbus error, no bus would handle it. */
495                 ret = 1;
496         } else {
497                 /* The sigbus error is caused of hot-unplug. */
498                 ret = pci_hot_unplug_handler(&pdev->device);
499                 if (ret) {
500                         RTE_LOG(ERR, EAL,
501                                 "Failed to handle hot-unplug for device %s",
502                                 pdev->name);
503                         ret = -1;
504                 }
505         }
506         return ret;
507 }
508
509 static int
510 pci_plug(struct rte_device *dev)
511 {
512         return pci_probe_all_drivers(RTE_DEV_TO_PCI(dev));
513 }
514
515 static int
516 pci_unplug(struct rte_device *dev)
517 {
518         struct rte_pci_device *pdev;
519         int ret;
520
521         pdev = RTE_DEV_TO_PCI(dev);
522         ret = rte_pci_detach_dev(pdev);
523         if (ret == 0) {
524                 rte_pci_remove_device(pdev);
525                 rte_devargs_remove(dev->devargs);
526                 free(pdev);
527         }
528         return ret;
529 }
530
531 struct rte_pci_bus rte_pci_bus = {
532         .bus = {
533                 .scan = rte_pci_scan,
534                 .probe = rte_pci_probe,
535                 .find_device = pci_find_device,
536                 .plug = pci_plug,
537                 .unplug = pci_unplug,
538                 .parse = pci_parse,
539                 .get_iommu_class = rte_pci_get_iommu_class,
540                 .dev_iterate = rte_pci_dev_iterate,
541                 .hot_unplug_handler = pci_hot_unplug_handler,
542                 .sigbus_handler = pci_sigbus_handler,
543         },
544         .device_list = TAILQ_HEAD_INITIALIZER(rte_pci_bus.device_list),
545         .driver_list = TAILQ_HEAD_INITIALIZER(rte_pci_bus.driver_list),
546 };
547
548 RTE_REGISTER_BUS(pci, rte_pci_bus.bus);