drivers/crypto/openssl/rte_openssl_pmd.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2016-2017 Intel Corporation
   3  */
   4
   5 #include <rte_common.h>
   6 #include <rte_hexdump.h>
   7 #include <rte_cryptodev.h>
   8 #include <rte_cryptodev_pmd.h>
   9 #include <rte_bus_vdev.h>
  10 #include <rte_malloc.h>
  11 #include <rte_cpuflags.h>
  12
  13 #include <openssl/hmac.h>
  14 #include <openssl/evp.h>
  15
  16 #include "rte_openssl_pmd_private.h"
  17 #include "compat.h"
  18
  19 #define DES_BLOCK_SIZE 8
  20
  21 static uint8_t cryptodev_driver_id;
  22
  23 #if (OPENSSL_VERSION_NUMBER < 0x10100000L)
  24 static HMAC_CTX *HMAC_CTX_new(void)
  25 {
  26         HMAC_CTX *ctx = OPENSSL_malloc(sizeof(*ctx));
  27
  28         if (ctx != NULL)
  29                 HMAC_CTX_init(ctx);
  30         return ctx;
  31 }
  32
  33 static void HMAC_CTX_free(HMAC_CTX *ctx)
  34 {
  35         if (ctx != NULL) {
  36                 HMAC_CTX_cleanup(ctx);
  37                 OPENSSL_free(ctx);
  38         }
  39 }
  40 #endif
  41
  42 static int cryptodev_openssl_remove(struct rte_vdev_device *vdev);
  43
  44 /*----------------------------------------------------------------------------*/
  45
  46 /**
  47  * Increment counter by 1
  48  * Counter is 64 bit array, big-endian
  49  */
  50 static void
  51 ctr_inc(uint8_t *ctr)
  52 {
  53         uint64_t *ctr64 = (uint64_t *)ctr;
  54
  55         *ctr64 = __builtin_bswap64(*ctr64);
  56         (*ctr64)++;
  57         *ctr64 = __builtin_bswap64(*ctr64);
  58 }
  59
  60 /*
  61  *------------------------------------------------------------------------------
  62  * Session Prepare
  63  *------------------------------------------------------------------------------
  64  */
  65
  66 /** Get xform chain order */
  67 static enum openssl_chain_order
  68 openssl_get_chain_order(const struct rte_crypto_sym_xform *xform)
  69 {
  70         enum openssl_chain_order res = OPENSSL_CHAIN_NOT_SUPPORTED;
  71
  72         if (xform != NULL) {
  73                 if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
  74                         if (xform->next == NULL)
  75                                 res =  OPENSSL_CHAIN_ONLY_AUTH;
  76                         else if (xform->next->type ==
  77                                         RTE_CRYPTO_SYM_XFORM_CIPHER)
  78                                 res =  OPENSSL_CHAIN_AUTH_CIPHER;
  79                 }
  80                 if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
  81                         if (xform->next == NULL)
  82                                 res =  OPENSSL_CHAIN_ONLY_CIPHER;
  83                         else if (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
  84                                 res =  OPENSSL_CHAIN_CIPHER_AUTH;
  85                 }
  86                 if (xform->type == RTE_CRYPTO_SYM_XFORM_AEAD)
  87                         res = OPENSSL_CHAIN_COMBINED;
  88         }
  89
  90         return res;
  91 }
  92
  93 /** Get session cipher key from input cipher key */
  94 static void
  95 get_cipher_key(uint8_t *input_key, int keylen, uint8_t *session_key)
  96 {
  97         memcpy(session_key, input_key, keylen);
  98 }
  99
 100 /** Get key ede 24 bytes standard from input key */
 101 static int
 102 get_cipher_key_ede(uint8_t *key, int keylen, uint8_t *key_ede)
 103 {
 104         int res = 0;
 105
 106         /* Initialize keys - 24 bytes: [key1-key2-key3] */
 107         switch (keylen) {
 108         case 24:
 109                 memcpy(key_ede, key, 24);
 110                 break;
 111         case 16:
 112                 /* K3 = K1 */
 113                 memcpy(key_ede, key, 16);
 114                 memcpy(key_ede + 16, key, 8);
 115                 break;
 116         case 8:
 117                 /* K1 = K2 = K3 (DES compatibility) */
 118                 memcpy(key_ede, key, 8);
 119                 memcpy(key_ede + 8, key, 8);
 120                 memcpy(key_ede + 16, key, 8);
 121                 break;
 122         default:
 123                 OPENSSL_LOG(ERR, "Unsupported key size");
 124                 res = -EINVAL;
 125         }
 126
 127         return res;
 128 }
 129
 130 /** Get adequate openssl function for input cipher algorithm */
 131 static uint8_t
 132 get_cipher_algo(enum rte_crypto_cipher_algorithm sess_algo, size_t keylen,
 133                 const EVP_CIPHER **algo)
 134 {
 135         int res = 0;
 136
 137         if (algo != NULL) {
 138                 switch (sess_algo) {
 139                 case RTE_CRYPTO_CIPHER_3DES_CBC:
 140                         switch (keylen) {
 141                         case 8:
 142                                 *algo = EVP_des_cbc();
 143                                 break;
 144                         case 16:
 145                                 *algo = EVP_des_ede_cbc();
 146                                 break;
 147                         case 24:
 148                                 *algo = EVP_des_ede3_cbc();
 149                                 break;
 150                         default:
 151                                 res = -EINVAL;
 152                         }
 153                         break;
 154                 case RTE_CRYPTO_CIPHER_3DES_CTR:
 155                         break;
 156                 case RTE_CRYPTO_CIPHER_AES_CBC:
 157                         switch (keylen) {
 158                         case 16:
 159                                 *algo = EVP_aes_128_cbc();
 160                                 break;
 161                         case 24:
 162                                 *algo = EVP_aes_192_cbc();
 163                                 break;
 164                         case 32:
 165                                 *algo = EVP_aes_256_cbc();
 166                                 break;
 167                         default:
 168                                 res = -EINVAL;
 169                         }
 170                         break;
 171                 case RTE_CRYPTO_CIPHER_AES_CTR:
 172                         switch (keylen) {
 173                         case 16:
 174                                 *algo = EVP_aes_128_ctr();
 175                                 break;
 176                         case 24:
 177                                 *algo = EVP_aes_192_ctr();
 178                                 break;
 179                         case 32:
 180                                 *algo = EVP_aes_256_ctr();
 181                                 break;
 182                         default:
 183                                 res = -EINVAL;
 184                         }
 185                         break;
 186                 default:
 187                         res = -EINVAL;
 188                         break;
 189                 }
 190         } else {
 191                 res = -EINVAL;
 192         }
 193
 194         return res;
 195 }
 196
 197 /** Get adequate openssl function for input auth algorithm */
 198 static uint8_t
 199 get_auth_algo(enum rte_crypto_auth_algorithm sessalgo,
 200                 const EVP_MD **algo)
 201 {
 202         int res = 0;
 203
 204         if (algo != NULL) {
 205                 switch (sessalgo) {
 206                 case RTE_CRYPTO_AUTH_MD5:
 207                 case RTE_CRYPTO_AUTH_MD5_HMAC:
 208                         *algo = EVP_md5();
 209                         break;
 210                 case RTE_CRYPTO_AUTH_SHA1:
 211                 case RTE_CRYPTO_AUTH_SHA1_HMAC:
 212                         *algo = EVP_sha1();
 213                         break;
 214                 case RTE_CRYPTO_AUTH_SHA224:
 215                 case RTE_CRYPTO_AUTH_SHA224_HMAC:
 216                         *algo = EVP_sha224();
 217                         break;
 218                 case RTE_CRYPTO_AUTH_SHA256:
 219                 case RTE_CRYPTO_AUTH_SHA256_HMAC:
 220                         *algo = EVP_sha256();
 221                         break;
 222                 case RTE_CRYPTO_AUTH_SHA384:
 223                 case RTE_CRYPTO_AUTH_SHA384_HMAC:
 224                         *algo = EVP_sha384();
 225                         break;
 226                 case RTE_CRYPTO_AUTH_SHA512:
 227                 case RTE_CRYPTO_AUTH_SHA512_HMAC:
 228                         *algo = EVP_sha512();
 229                         break;
 230                 default:
 231                         res = -EINVAL;
 232                         break;
 233                 }
 234         } else {
 235                 res = -EINVAL;
 236         }
 237
 238         return res;
 239 }
 240
 241 /** Get adequate openssl function for input cipher algorithm */
 242 static uint8_t
 243 get_aead_algo(enum rte_crypto_aead_algorithm sess_algo, size_t keylen,
 244                 const EVP_CIPHER **algo)
 245 {
 246         int res = 0;
 247
 248         if (algo != NULL) {
 249                 switch (sess_algo) {
 250                 case RTE_CRYPTO_AEAD_AES_GCM:
 251                         switch (keylen) {
 252                         case 16:
 253                                 *algo = EVP_aes_128_gcm();
 254                                 break;
 255                         case 24:
 256                                 *algo = EVP_aes_192_gcm();
 257                                 break;
 258                         case 32:
 259                                 *algo = EVP_aes_256_gcm();
 260                                 break;
 261                         default:
 262                                 res = -EINVAL;
 263                         }
 264                         break;
 265                 case RTE_CRYPTO_AEAD_AES_CCM:
 266                         switch (keylen) {
 267                         case 16:
 268                                 *algo = EVP_aes_128_ccm();
 269                                 break;
 270                         case 24:
 271                                 *algo = EVP_aes_192_ccm();
 272                                 break;
 273                         case 32:
 274                                 *algo = EVP_aes_256_ccm();
 275                                 break;
 276                         default:
 277                                 res = -EINVAL;
 278                         }
 279                         break;
 280                 default:
 281                         res = -EINVAL;
 282                         break;
 283                 }
 284         } else {
 285                 res = -EINVAL;
 286         }
 287
 288         return res;
 289 }
 290
 291 /* Set session AEAD encryption parameters */
 292 static int
 293 openssl_set_sess_aead_enc_param(struct openssl_session *sess,
 294                 enum rte_crypto_aead_algorithm algo,
 295                 uint8_t tag_len, uint8_t *key)
 296 {
 297         int iv_type = 0;
 298         unsigned int do_ccm;
 299
 300         sess->cipher.direction = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
 301         sess->auth.operation = RTE_CRYPTO_AUTH_OP_GENERATE;
 302
 303         /* Select AEAD algo */
 304         switch (algo) {
 305         case RTE_CRYPTO_AEAD_AES_GCM:
 306                 iv_type = EVP_CTRL_GCM_SET_IVLEN;
 307                 if (tag_len != 16)
 308                         return -EINVAL;
 309                 do_ccm = 0;
 310                 break;
 311         case RTE_CRYPTO_AEAD_AES_CCM:
 312                 iv_type = EVP_CTRL_CCM_SET_IVLEN;
 313                 /* Digest size can be 4, 6, 8, 10, 12, 14 or 16 bytes */
 314                 if (tag_len < 4 || tag_len > 16 || (tag_len & 1) == 1)
 315                         return -EINVAL;
 316                 do_ccm = 1;
 317                 break;
 318         default:
 319                 return -ENOTSUP;
 320         }
 321
 322         sess->cipher.mode = OPENSSL_CIPHER_LIB;
 323         sess->cipher.ctx = EVP_CIPHER_CTX_new();
 324
 325         if (get_aead_algo(algo, sess->cipher.key.length,
 326                         &sess->cipher.evp_algo) != 0)
 327                 return -EINVAL;
 328
 329         get_cipher_key(key, sess->cipher.key.length, sess->cipher.key.data);
 330
 331         sess->chain_order = OPENSSL_CHAIN_COMBINED;
 332
 333         if (EVP_EncryptInit_ex(sess->cipher.ctx, sess->cipher.evp_algo,
 334                         NULL, NULL, NULL) <= 0)
 335                 return -EINVAL;
 336
 337         if (EVP_CIPHER_CTX_ctrl(sess->cipher.ctx, iv_type, sess->iv.length,
 338                         NULL) <= 0)
 339                 return -EINVAL;
 340
 341         if (do_ccm)
 342                 EVP_CIPHER_CTX_ctrl(sess->cipher.ctx, EVP_CTRL_CCM_SET_TAG,
 343                                 tag_len, NULL);
 344
 345         if (EVP_EncryptInit_ex(sess->cipher.ctx, NULL, NULL, key, NULL) <= 0)
 346                 return -EINVAL;
 347
 348         return 0;
 349 }
 350
 351 /* Set session AEAD decryption parameters */
 352 static int
 353 openssl_set_sess_aead_dec_param(struct openssl_session *sess,
 354                 enum rte_crypto_aead_algorithm algo,
 355                 uint8_t tag_len, uint8_t *key)
 356 {
 357         int iv_type = 0;
 358         unsigned int do_ccm = 0;
 359
 360         sess->cipher.direction = RTE_CRYPTO_CIPHER_OP_DECRYPT;
 361         sess->auth.operation = RTE_CRYPTO_AUTH_OP_VERIFY;
 362
 363         /* Select AEAD algo */
 364         switch (algo) {
 365         case RTE_CRYPTO_AEAD_AES_GCM:
 366                 iv_type = EVP_CTRL_GCM_SET_IVLEN;
 367                 if (tag_len != 16)
 368                         return -EINVAL;
 369                 break;
 370         case RTE_CRYPTO_AEAD_AES_CCM:
 371                 iv_type = EVP_CTRL_CCM_SET_IVLEN;
 372                 /* Digest size can be 4, 6, 8, 10, 12, 14 or 16 bytes */
 373                 if (tag_len < 4 || tag_len > 16 || (tag_len & 1) == 1)
 374                         return -EINVAL;
 375                 do_ccm = 1;
 376                 break;
 377         default:
 378                 return -ENOTSUP;
 379         }
 380
 381         sess->cipher.mode = OPENSSL_CIPHER_LIB;
 382         sess->cipher.ctx = EVP_CIPHER_CTX_new();
 383
 384         if (get_aead_algo(algo, sess->cipher.key.length,
 385                         &sess->cipher.evp_algo) != 0)
 386                 return -EINVAL;
 387
 388         get_cipher_key(key, sess->cipher.key.length, sess->cipher.key.data);
 389
 390         sess->chain_order = OPENSSL_CHAIN_COMBINED;
 391
 392         if (EVP_DecryptInit_ex(sess->cipher.ctx, sess->cipher.evp_algo,
 393                         NULL, NULL, NULL) <= 0)
 394                 return -EINVAL;
 395
 396         if (EVP_CIPHER_CTX_ctrl(sess->cipher.ctx, iv_type,
 397                         sess->iv.length, NULL) <= 0)
 398                 return -EINVAL;
 399
 400         if (do_ccm)
 401                 EVP_CIPHER_CTX_ctrl(sess->cipher.ctx, EVP_CTRL_CCM_SET_TAG,
 402                                 tag_len, NULL);
 403
 404         if (EVP_DecryptInit_ex(sess->cipher.ctx, NULL, NULL, key, NULL) <= 0)
 405                 return -EINVAL;
 406
 407         return 0;
 408 }
 409
 410 /** Set session cipher parameters */
 411 static int
 412 openssl_set_session_cipher_parameters(struct openssl_session *sess,
 413                 const struct rte_crypto_sym_xform *xform)
 414 {
 415         /* Select cipher direction */
 416         sess->cipher.direction = xform->cipher.op;
 417         /* Select cipher key */
 418         sess->cipher.key.length = xform->cipher.key.length;
 419
 420         /* Set IV parameters */
 421         sess->iv.offset = xform->cipher.iv.offset;
 422         sess->iv.length = xform->cipher.iv.length;
 423
 424         /* Select cipher algo */
 425         switch (xform->cipher.algo) {
 426         case RTE_CRYPTO_CIPHER_3DES_CBC:
 427         case RTE_CRYPTO_CIPHER_AES_CBC:
 428         case RTE_CRYPTO_CIPHER_AES_CTR:
 429                 sess->cipher.mode = OPENSSL_CIPHER_LIB;
 430                 sess->cipher.algo = xform->cipher.algo;
 431                 sess->cipher.ctx = EVP_CIPHER_CTX_new();
 432
 433                 if (get_cipher_algo(sess->cipher.algo, sess->cipher.key.length,
 434                                 &sess->cipher.evp_algo) != 0)
 435                         return -EINVAL;
 436
 437                 get_cipher_key(xform->cipher.key.data, sess->cipher.key.length,
 438                         sess->cipher.key.data);
 439                 if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT) {
 440                         if (EVP_EncryptInit_ex(sess->cipher.ctx,
 441                                         sess->cipher.evp_algo,
 442                                         NULL, xform->cipher.key.data,
 443                                         NULL) != 1) {
 444                                 return -EINVAL;
 445                         }
 446                 } else if (sess->cipher.direction ==
 447                                 RTE_CRYPTO_CIPHER_OP_DECRYPT) {
 448                         if (EVP_DecryptInit_ex(sess->cipher.ctx,
 449                                         sess->cipher.evp_algo,
 450                                         NULL, xform->cipher.key.data,
 451                                         NULL) != 1) {
 452                                 return -EINVAL;
 453                         }
 454                 }
 455
 456                 break;
 457
 458         case RTE_CRYPTO_CIPHER_3DES_CTR:
 459                 sess->cipher.mode = OPENSSL_CIPHER_DES3CTR;
 460                 sess->cipher.ctx = EVP_CIPHER_CTX_new();
 461
 462                 if (get_cipher_key_ede(xform->cipher.key.data,
 463                                 sess->cipher.key.length,
 464                                 sess->cipher.key.data) != 0)
 465                         return -EINVAL;
 466                 break;
 467
 468         case RTE_CRYPTO_CIPHER_DES_CBC:
 469                 sess->cipher.algo = xform->cipher.algo;
 470                 sess->cipher.ctx = EVP_CIPHER_CTX_new();
 471                 sess->cipher.evp_algo = EVP_des_cbc();
 472
 473                 get_cipher_key(xform->cipher.key.data, sess->cipher.key.length,
 474                         sess->cipher.key.data);
 475                 if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT) {
 476                         if (EVP_EncryptInit_ex(sess->cipher.ctx,
 477                                         sess->cipher.evp_algo,
 478                                         NULL, xform->cipher.key.data,
 479                                         NULL) != 1) {
 480                                 return -EINVAL;
 481                         }
 482                 } else if (sess->cipher.direction ==
 483                                 RTE_CRYPTO_CIPHER_OP_DECRYPT) {
 484                         if (EVP_DecryptInit_ex(sess->cipher.ctx,
 485                                         sess->cipher.evp_algo,
 486                                         NULL, xform->cipher.key.data,
 487                                         NULL) != 1) {
 488                                 return -EINVAL;
 489                         }
 490                 }
 491
 492                 break;
 493
 494         case RTE_CRYPTO_CIPHER_DES_DOCSISBPI:
 495                 sess->cipher.algo = xform->cipher.algo;
 496                 sess->chain_order = OPENSSL_CHAIN_CIPHER_BPI;
 497                 sess->cipher.ctx = EVP_CIPHER_CTX_new();
 498                 sess->cipher.evp_algo = EVP_des_cbc();
 499
 500                 sess->cipher.bpi_ctx = EVP_CIPHER_CTX_new();
 501                 /* IV will be ECB encrypted whether direction is encrypt or decrypt */
 502                 if (EVP_EncryptInit_ex(sess->cipher.bpi_ctx, EVP_des_ecb(),
 503                                 NULL, xform->cipher.key.data, 0) != 1)
 504                         return -EINVAL;
 505
 506                 get_cipher_key(xform->cipher.key.data, sess->cipher.key.length,
 507                         sess->cipher.key.data);
 508                 if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT) {
 509                         if (EVP_EncryptInit_ex(sess->cipher.ctx,
 510                                         sess->cipher.evp_algo,
 511                                         NULL, xform->cipher.key.data,
 512                                         NULL) != 1) {
 513                                 return -EINVAL;
 514                         }
 515                 } else if (sess->cipher.direction ==
 516                                 RTE_CRYPTO_CIPHER_OP_DECRYPT) {
 517                         if (EVP_DecryptInit_ex(sess->cipher.ctx,
 518                                         sess->cipher.evp_algo,
 519                                         NULL, xform->cipher.key.data,
 520                                         NULL) != 1) {
 521                                 return -EINVAL;
 522                         }
 523                 }
 524
 525                 break;
 526         default:
 527                 sess->cipher.algo = RTE_CRYPTO_CIPHER_NULL;
 528                 return -ENOTSUP;
 529         }
 530
 531         return 0;
 532 }
 533
 534 /* Set session auth parameters */
 535 static int
 536 openssl_set_session_auth_parameters(struct openssl_session *sess,
 537                 const struct rte_crypto_sym_xform *xform)
 538 {
 539         /* Select auth generate/verify */
 540         sess->auth.operation = xform->auth.op;
 541         sess->auth.algo = xform->auth.algo;
 542
 543         sess->auth.digest_length = xform->auth.digest_length;
 544
 545         /* Select auth algo */
 546         switch (xform->auth.algo) {
 547         case RTE_CRYPTO_AUTH_AES_GMAC:
 548                 /*
 549                  * OpenSSL requires GMAC to be a GCM operation
 550                  * with no cipher data length
 551                  */
 552                 sess->cipher.key.length = xform->auth.key.length;
 553
 554                 /* Set IV parameters */
 555                 sess->iv.offset = xform->auth.iv.offset;
 556                 sess->iv.length = xform->auth.iv.length;
 557
 558                 if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_GENERATE)
 559                         return openssl_set_sess_aead_enc_param(sess,
 560                                                 RTE_CRYPTO_AEAD_AES_GCM,
 561                                                 xform->auth.digest_length,
 562                                                 xform->auth.key.data);
 563                 else
 564                         return openssl_set_sess_aead_dec_param(sess,
 565                                                 RTE_CRYPTO_AEAD_AES_GCM,
 566                                                 xform->auth.digest_length,
 567                                                 xform->auth.key.data);
 568                 break;
 569
 570         case RTE_CRYPTO_AUTH_MD5:
 571         case RTE_CRYPTO_AUTH_SHA1:
 572         case RTE_CRYPTO_AUTH_SHA224:
 573         case RTE_CRYPTO_AUTH_SHA256:
 574         case RTE_CRYPTO_AUTH_SHA384:
 575         case RTE_CRYPTO_AUTH_SHA512:
 576                 sess->auth.mode = OPENSSL_AUTH_AS_AUTH;
 577                 if (get_auth_algo(xform->auth.algo,
 578                                 &sess->auth.auth.evp_algo) != 0)
 579                         return -EINVAL;
 580                 sess->auth.auth.ctx = EVP_MD_CTX_create();
 581                 break;
 582
 583         case RTE_CRYPTO_AUTH_MD5_HMAC:
 584         case RTE_CRYPTO_AUTH_SHA1_HMAC:
 585         case RTE_CRYPTO_AUTH_SHA224_HMAC:
 586         case RTE_CRYPTO_AUTH_SHA256_HMAC:
 587         case RTE_CRYPTO_AUTH_SHA384_HMAC:
 588         case RTE_CRYPTO_AUTH_SHA512_HMAC:
 589                 sess->auth.mode = OPENSSL_AUTH_AS_HMAC;
 590                 sess->auth.hmac.ctx = HMAC_CTX_new();
 591                 if (get_auth_algo(xform->auth.algo,
 592                                 &sess->auth.hmac.evp_algo) != 0)
 593                         return -EINVAL;
 594
 595                 if (HMAC_Init_ex(sess->auth.hmac.ctx,
 596                                 xform->auth.key.data,
 597                                 xform->auth.key.length,
 598                                 sess->auth.hmac.evp_algo, NULL) != 1)
 599                         return -EINVAL;
 600                 break;
 601
 602         default:
 603                 return -ENOTSUP;
 604         }
 605
 606         return 0;
 607 }
 608
 609 /* Set session AEAD parameters */
 610 static int
 611 openssl_set_session_aead_parameters(struct openssl_session *sess,
 612                 const struct rte_crypto_sym_xform *xform)
 613 {
 614         /* Select cipher key */
 615         sess->cipher.key.length = xform->aead.key.length;
 616
 617         /* Set IV parameters */
 618         if (xform->aead.algo == RTE_CRYPTO_AEAD_AES_CCM)
 619                 /*
 620                  * For AES-CCM, the actual IV is placed
 621                  * one byte after the start of the IV field,
 622                  * according to the API.
 623                  */
 624                 sess->iv.offset = xform->aead.iv.offset + 1;
 625         else
 626                 sess->iv.offset = xform->aead.iv.offset;
 627
 628         sess->iv.length = xform->aead.iv.length;
 629
 630         sess->auth.aad_length = xform->aead.aad_length;
 631         sess->auth.digest_length = xform->aead.digest_length;
 632
 633         sess->aead_algo = xform->aead.algo;
 634         /* Select cipher direction */
 635         if (xform->aead.op == RTE_CRYPTO_AEAD_OP_ENCRYPT)
 636                 return openssl_set_sess_aead_enc_param(sess, xform->aead.algo,
 637                                 xform->aead.digest_length, xform->aead.key.data);
 638         else
 639                 return openssl_set_sess_aead_dec_param(sess, xform->aead.algo,
 640                                 xform->aead.digest_length, xform->aead.key.data);
 641 }
 642
 643 /** Parse crypto xform chain and set private session parameters */
 644 int
 645 openssl_set_session_parameters(struct openssl_session *sess,
 646                 const struct rte_crypto_sym_xform *xform)
 647 {
 648         const struct rte_crypto_sym_xform *cipher_xform = NULL;
 649         const struct rte_crypto_sym_xform *auth_xform = NULL;
 650         const struct rte_crypto_sym_xform *aead_xform = NULL;
 651         int ret;
 652
 653         sess->chain_order = openssl_get_chain_order(xform);
 654         switch (sess->chain_order) {
 655         case OPENSSL_CHAIN_ONLY_CIPHER:
 656                 cipher_xform = xform;
 657                 break;
 658         case OPENSSL_CHAIN_ONLY_AUTH:
 659                 auth_xform = xform;
 660                 break;
 661         case OPENSSL_CHAIN_CIPHER_AUTH:
 662                 cipher_xform = xform;
 663                 auth_xform = xform->next;
 664                 break;
 665         case OPENSSL_CHAIN_AUTH_CIPHER:
 666                 auth_xform = xform;
 667                 cipher_xform = xform->next;
 668                 break;
 669         case OPENSSL_CHAIN_COMBINED:
 670                 aead_xform = xform;
 671                 break;
 672         default:
 673                 return -EINVAL;
 674         }
 675
 676         /* Default IV length = 0 */
 677         sess->iv.length = 0;
 678
 679         /* cipher_xform must be check before auth_xform */
 680         if (cipher_xform) {
 681                 ret = openssl_set_session_cipher_parameters(
 682                                 sess, cipher_xform);
 683                 if (ret != 0) {
 684                         OPENSSL_LOG(ERR,
 685                                 "Invalid/unsupported cipher parameters");
 686                         return ret;
 687                 }
 688         }
 689
 690         if (auth_xform) {
 691                 ret = openssl_set_session_auth_parameters(sess, auth_xform);
 692                 if (ret != 0) {
 693                         OPENSSL_LOG(ERR,
 694                                 "Invalid/unsupported auth parameters");
 695                         return ret;
 696                 }
 697         }
 698
 699         if (aead_xform) {
 700                 ret = openssl_set_session_aead_parameters(sess, aead_xform);
 701                 if (ret != 0) {
 702                         OPENSSL_LOG(ERR,
 703                                 "Invalid/unsupported AEAD parameters");
 704                         return ret;
 705                 }
 706         }
 707
 708         return 0;
 709 }
 710
 711 /** Reset private session parameters */
 712 void
 713 openssl_reset_session(struct openssl_session *sess)
 714 {
 715         EVP_CIPHER_CTX_free(sess->cipher.ctx);
 716
 717         if (sess->chain_order == OPENSSL_CHAIN_CIPHER_BPI)
 718                 EVP_CIPHER_CTX_free(sess->cipher.bpi_ctx);
 719
 720         switch (sess->auth.mode) {
 721         case OPENSSL_AUTH_AS_AUTH:
 722                 EVP_MD_CTX_destroy(sess->auth.auth.ctx);
 723                 break;
 724         case OPENSSL_AUTH_AS_HMAC:
 725                 EVP_PKEY_free(sess->auth.hmac.pkey);
 726                 HMAC_CTX_free(sess->auth.hmac.ctx);
 727                 break;
 728         default:
 729                 break;
 730         }
 731 }
 732
 733 /** Provide session for operation */
 734 static void *
 735 get_session(struct openssl_qp *qp, struct rte_crypto_op *op)
 736 {
 737         struct openssl_session *sess = NULL;
 738         struct openssl_asym_session *asym_sess = NULL;
 739
 740         if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) {
 741                 if (op->type == RTE_CRYPTO_OP_TYPE_SYMMETRIC) {
 742                         /* get existing session */
 743                         if (likely(op->sym->session != NULL))
 744                                 sess = (struct openssl_session *)
 745                                                 get_sym_session_private_data(
 746                                                 op->sym->session,
 747                                                 cryptodev_driver_id);
 748                 } else {
 749                         if (likely(op->asym->session != NULL))
 750                                 asym_sess = (struct openssl_asym_session *)
 751                                                 get_asym_session_private_data(
 752                                                 op->asym->session,
 753                                                 cryptodev_driver_id);
 754                         if (asym_sess == NULL)
 755                                 op->status =
 756                                         RTE_CRYPTO_OP_STATUS_INVALID_SESSION;
 757                         return asym_sess;
 758                 }
 759         } else {
 760                 /* sessionless asymmetric not supported */
 761                 if (op->type == RTE_CRYPTO_OP_TYPE_ASYMMETRIC)
 762                         return NULL;
 763
 764                 /* provide internal session */
 765                 void *_sess = NULL;
 766                 void *_sess_private_data = NULL;
 767
 768                 if (rte_mempool_get(qp->sess_mp, (void **)&_sess))
 769                         return NULL;
 770
 771                 if (rte_mempool_get(qp->sess_mp, (void **)&_sess_private_data))
 772                         return NULL;
 773
 774                 sess = (struct openssl_session *)_sess_private_data;
 775
 776                 if (unlikely(openssl_set_session_parameters(sess,
 777                                 op->sym->xform) != 0)) {
 778                         rte_mempool_put(qp->sess_mp, _sess);
 779                         rte_mempool_put(qp->sess_mp, _sess_private_data);
 780                         sess = NULL;
 781                 }
 782                 op->sym->session = (struct rte_cryptodev_sym_session *)_sess;
 783                 set_sym_session_private_data(op->sym->session,
 784                                 cryptodev_driver_id, _sess_private_data);
 785         }
 786
 787         if (sess == NULL)
 788                 op->status = RTE_CRYPTO_OP_STATUS_INVALID_SESSION;
 789
 790         return sess;
 791 }
 792
 793 /*
 794  *------------------------------------------------------------------------------
 795  * Process Operations
 796  *------------------------------------------------------------------------------
 797  */
 798 static inline int
 799 process_openssl_encryption_update(struct rte_mbuf *mbuf_src, int offset,
 800                 uint8_t **dst, int srclen, EVP_CIPHER_CTX *ctx)
 801 {
 802         struct rte_mbuf *m;
 803         int dstlen;
 804         int l, n = srclen;
 805         uint8_t *src;
 806
 807         for (m = mbuf_src; m != NULL && offset > rte_pktmbuf_data_len(m);
 808                         m = m->next)
 809                 offset -= rte_pktmbuf_data_len(m);
 810
 811         if (m == 0)
 812                 return -1;
 813
 814         src = rte_pktmbuf_mtod_offset(m, uint8_t *, offset);
 815
 816         l = rte_pktmbuf_data_len(m) - offset;
 817         if (srclen <= l) {
 818                 if (EVP_EncryptUpdate(ctx, *dst, &dstlen, src, srclen) <= 0)
 819                         return -1;
 820                 *dst += l;
 821                 return 0;
 822         }
 823
 824         if (EVP_EncryptUpdate(ctx, *dst, &dstlen, src, l) <= 0)
 825                 return -1;
 826
 827         *dst += dstlen;
 828         n -= l;
 829
 830         for (m = m->next; (m != NULL) && (n > 0); m = m->next) {
 831                 src = rte_pktmbuf_mtod(m, uint8_t *);
 832                 l = rte_pktmbuf_data_len(m) < n ? rte_pktmbuf_data_len(m) : n;
 833                 if (EVP_EncryptUpdate(ctx, *dst, &dstlen, src, l) <= 0)
 834                         return -1;
 835                 *dst += dstlen;
 836                 n -= l;
 837         }
 838
 839         return 0;
 840 }
 841
 842 static inline int
 843 process_openssl_decryption_update(struct rte_mbuf *mbuf_src, int offset,
 844                 uint8_t **dst, int srclen, EVP_CIPHER_CTX *ctx)
 845 {
 846         struct rte_mbuf *m;
 847         int dstlen;
 848         int l, n = srclen;
 849         uint8_t *src;
 850
 851         for (m = mbuf_src; m != NULL && offset > rte_pktmbuf_data_len(m);
 852                         m = m->next)
 853                 offset -= rte_pktmbuf_data_len(m);
 854
 855         if (m == 0)
 856                 return -1;
 857
 858         src = rte_pktmbuf_mtod_offset(m, uint8_t *, offset);
 859
 860         l = rte_pktmbuf_data_len(m) - offset;
 861         if (srclen <= l) {
 862                 if (EVP_DecryptUpdate(ctx, *dst, &dstlen, src, srclen) <= 0)
 863                         return -1;
 864                 *dst += l;
 865                 return 0;
 866         }
 867
 868         if (EVP_DecryptUpdate(ctx, *dst, &dstlen, src, l) <= 0)
 869                 return -1;
 870
 871         *dst += dstlen;
 872         n -= l;
 873
 874         for (m = m->next; (m != NULL) && (n > 0); m = m->next) {
 875                 src = rte_pktmbuf_mtod(m, uint8_t *);
 876                 l = rte_pktmbuf_data_len(m) < n ? rte_pktmbuf_data_len(m) : n;
 877                 if (EVP_DecryptUpdate(ctx, *dst, &dstlen, src, l) <= 0)
 878                         return -1;
 879                 *dst += dstlen;
 880                 n -= l;
 881         }
 882
 883         return 0;
 884 }
 885
 886 /** Process standard openssl cipher encryption */
 887 static int
 888 process_openssl_cipher_encrypt(struct rte_mbuf *mbuf_src, uint8_t *dst,
 889                 int offset, uint8_t *iv, int srclen, EVP_CIPHER_CTX *ctx)
 890 {
 891         int totlen;
 892
 893         if (EVP_EncryptInit_ex(ctx, NULL, NULL, NULL, iv) <= 0)
 894                 goto process_cipher_encrypt_err;
 895
 896         EVP_CIPHER_CTX_set_padding(ctx, 0);
 897
 898         if (process_openssl_encryption_update(mbuf_src, offset, &dst,
 899                         srclen, ctx))
 900                 goto process_cipher_encrypt_err;
 901
 902         if (EVP_EncryptFinal_ex(ctx, dst, &totlen) <= 0)
 903                 goto process_cipher_encrypt_err;
 904
 905         return 0;
 906
 907 process_cipher_encrypt_err:
 908         OPENSSL_LOG(ERR, "Process openssl cipher encrypt failed");
 909         return -EINVAL;
 910 }
 911
 912 /** Process standard openssl cipher encryption */
 913 static int
 914 process_openssl_cipher_bpi_encrypt(uint8_t *src, uint8_t *dst,
 915                 uint8_t *iv, int srclen,
 916                 EVP_CIPHER_CTX *ctx)
 917 {
 918         uint8_t i;
 919         uint8_t encrypted_iv[DES_BLOCK_SIZE];
 920         int encrypted_ivlen;
 921
 922         if (EVP_EncryptUpdate(ctx, encrypted_iv, &encrypted_ivlen,
 923                         iv, DES_BLOCK_SIZE) <= 0)
 924                 goto process_cipher_encrypt_err;
 925
 926         for (i = 0; i < srclen; i++)
 927                 *(dst + i) = *(src + i) ^ (encrypted_iv[i]);
 928
 929         return 0;
 930
 931 process_cipher_encrypt_err:
 932         OPENSSL_LOG(ERR, "Process openssl cipher bpi encrypt failed");
 933         return -EINVAL;
 934 }
 935 /** Process standard openssl cipher decryption */
 936 static int
 937 process_openssl_cipher_decrypt(struct rte_mbuf *mbuf_src, uint8_t *dst,
 938                 int offset, uint8_t *iv, int srclen, EVP_CIPHER_CTX *ctx)
 939 {
 940         int totlen;
 941
 942         if (EVP_DecryptInit_ex(ctx, NULL, NULL, NULL, iv) <= 0)
 943                 goto process_cipher_decrypt_err;
 944
 945         EVP_CIPHER_CTX_set_padding(ctx, 0);
 946
 947         if (process_openssl_decryption_update(mbuf_src, offset, &dst,
 948                         srclen, ctx))
 949                 goto process_cipher_decrypt_err;
 950
 951         if (EVP_DecryptFinal_ex(ctx, dst, &totlen) <= 0)
 952                 goto process_cipher_decrypt_err;
 953         return 0;
 954
 955 process_cipher_decrypt_err:
 956         OPENSSL_LOG(ERR, "Process openssl cipher decrypt failed");
 957         return -EINVAL;
 958 }
 959
 960 /** Process cipher des 3 ctr encryption, decryption algorithm */
 961 static int
 962 process_openssl_cipher_des3ctr(struct rte_mbuf *mbuf_src, uint8_t *dst,
 963                 int offset, uint8_t *iv, uint8_t *key, int srclen,
 964                 EVP_CIPHER_CTX *ctx)
 965 {
 966         uint8_t ebuf[8], ctr[8];
 967         int unused, n;
 968         struct rte_mbuf *m;
 969         uint8_t *src;
 970         int l;
 971
 972         for (m = mbuf_src; m != NULL && offset > rte_pktmbuf_data_len(m);
 973                         m = m->next)
 974                 offset -= rte_pktmbuf_data_len(m);
 975
 976         if (m == 0)
 977                 goto process_cipher_des3ctr_err;
 978
 979         src = rte_pktmbuf_mtod_offset(m, uint8_t *, offset);
 980         l = rte_pktmbuf_data_len(m) - offset;
 981
 982         /* We use 3DES encryption also for decryption.
 983          * IV is not important for 3DES ecb
 984          */
 985         if (EVP_EncryptInit_ex(ctx, EVP_des_ede3_ecb(), NULL, key, NULL) <= 0)
 986                 goto process_cipher_des3ctr_err;
 987
 988         memcpy(ctr, iv, 8);
 989
 990         for (n = 0; n < srclen; n++) {
 991                 if (n % 8 == 0) {
 992                         if (EVP_EncryptUpdate(ctx,
 993                                         (unsigned char *)&ebuf, &unused,
 994                                         (const unsigned char *)&ctr, 8) <= 0)
 995                                 goto process_cipher_des3ctr_err;
 996                         ctr_inc(ctr);
 997                 }
 998                 dst[n] = *(src++) ^ ebuf[n % 8];
 999
1000                 l--;
1001                 if (!l) {
1002                         m = m->next;
1003                         if (m) {
1004                                 src = rte_pktmbuf_mtod(m, uint8_t *);
1005                                 l = rte_pktmbuf_data_len(m);
1006                         }
1007                 }
1008         }
1009
1010         return 0;
1011
1012 process_cipher_des3ctr_err:
1013         OPENSSL_LOG(ERR, "Process openssl cipher des 3 ede ctr failed");
1014         return -EINVAL;
1015 }
1016
1017 /** Process AES-GCM encrypt algorithm */
1018 static int
1019 process_openssl_auth_encryption_gcm(struct rte_mbuf *mbuf_src, int offset,
1020                 int srclen, uint8_t *aad, int aadlen, uint8_t *iv,
1021                 uint8_t *dst, uint8_t *tag, EVP_CIPHER_CTX *ctx)
1022 {
1023         int len = 0, unused = 0;
1024         uint8_t empty[] = {};
1025
1026         if (EVP_EncryptInit_ex(ctx, NULL, NULL, NULL, iv) <= 0)
1027                 goto process_auth_encryption_gcm_err;
1028
1029         if (aadlen > 0)
1030                 if (EVP_EncryptUpdate(ctx, NULL, &len, aad, aadlen) <= 0)
1031                         goto process_auth_encryption_gcm_err;
1032
1033         if (srclen > 0)
1034                 if (process_openssl_encryption_update(mbuf_src, offset, &dst,
1035                                 srclen, ctx))
1036                         goto process_auth_encryption_gcm_err;
1037
1038         /* Workaround open ssl bug in version less then 1.0.1f */
1039         if (EVP_EncryptUpdate(ctx, empty, &unused, empty, 0) <= 0)
1040                 goto process_auth_encryption_gcm_err;
1041
1042         if (EVP_EncryptFinal_ex(ctx, dst, &len) <= 0)
1043                 goto process_auth_encryption_gcm_err;
1044
1045         if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_GET_TAG, 16, tag) <= 0)
1046                 goto process_auth_encryption_gcm_err;
1047
1048         return 0;
1049
1050 process_auth_encryption_gcm_err:
1051         OPENSSL_LOG(ERR, "Process openssl auth encryption gcm failed");
1052         return -EINVAL;
1053 }
1054
1055 /** Process AES-CCM encrypt algorithm */
1056 static int
1057 process_openssl_auth_encryption_ccm(struct rte_mbuf *mbuf_src, int offset,
1058                 int srclen, uint8_t *aad, int aadlen, uint8_t *iv,
1059                 uint8_t *dst, uint8_t *tag, uint8_t taglen, EVP_CIPHER_CTX *ctx)
1060 {
1061         int len = 0;
1062
1063         if (EVP_EncryptInit_ex(ctx, NULL, NULL, NULL, iv) <= 0)
1064                 goto process_auth_encryption_ccm_err;
1065
1066         if (EVP_EncryptUpdate(ctx, NULL, &len, NULL, srclen) <= 0)
1067                 goto process_auth_encryption_ccm_err;
1068
1069         if (aadlen > 0)
1070                 /*
1071                  * For AES-CCM, the actual AAD is placed
1072                  * 18 bytes after the start of the AAD field,
1073                  * according to the API.
1074                  */
1075                 if (EVP_EncryptUpdate(ctx, NULL, &len, aad + 18, aadlen) <= 0)
1076                         goto process_auth_encryption_ccm_err;
1077
1078         if (srclen > 0)
1079                 if (process_openssl_encryption_update(mbuf_src, offset, &dst,
1080                                 srclen, ctx))
1081                         goto process_auth_encryption_ccm_err;
1082
1083         if (EVP_EncryptFinal_ex(ctx, dst, &len) <= 0)
1084                 goto process_auth_encryption_ccm_err;
1085
1086         if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_CCM_GET_TAG, taglen, tag) <= 0)
1087                 goto process_auth_encryption_ccm_err;
1088
1089         return 0;
1090
1091 process_auth_encryption_ccm_err:
1092         OPENSSL_LOG(ERR, "Process openssl auth encryption ccm failed");
1093         return -EINVAL;
1094 }
1095
1096 /** Process AES-GCM decrypt algorithm */
1097 static int
1098 process_openssl_auth_decryption_gcm(struct rte_mbuf *mbuf_src, int offset,
1099                 int srclen, uint8_t *aad, int aadlen, uint8_t *iv,
1100                 uint8_t *dst, uint8_t *tag, EVP_CIPHER_CTX *ctx)
1101 {
1102         int len = 0, unused = 0;
1103         uint8_t empty[] = {};
1104
1105         if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_TAG, 16, tag) <= 0)
1106                 goto process_auth_decryption_gcm_err;
1107
1108         if (EVP_DecryptInit_ex(ctx, NULL, NULL, NULL, iv) <= 0)
1109                 goto process_auth_decryption_gcm_err;
1110
1111         if (aadlen > 0)
1112                 if (EVP_DecryptUpdate(ctx, NULL, &len, aad, aadlen) <= 0)
1113                         goto process_auth_decryption_gcm_err;
1114
1115         if (srclen > 0)
1116                 if (process_openssl_decryption_update(mbuf_src, offset, &dst,
1117                                 srclen, ctx))
1118                         goto process_auth_decryption_gcm_err;
1119
1120         /* Workaround open ssl bug in version less then 1.0.1f */
1121         if (EVP_DecryptUpdate(ctx, empty, &unused, empty, 0) <= 0)
1122                 goto process_auth_decryption_gcm_err;
1123
1124         if (EVP_DecryptFinal_ex(ctx, dst, &len) <= 0)
1125                 return -EFAULT;
1126
1127         return 0;
1128
1129 process_auth_decryption_gcm_err:
1130         OPENSSL_LOG(ERR, "Process openssl auth decryption gcm failed");
1131         return -EINVAL;
1132 }
1133
1134 /** Process AES-CCM decrypt algorithm */
1135 static int
1136 process_openssl_auth_decryption_ccm(struct rte_mbuf *mbuf_src, int offset,
1137                 int srclen, uint8_t *aad, int aadlen, uint8_t *iv,
1138                 uint8_t *dst, uint8_t *tag, uint8_t tag_len,
1139                 EVP_CIPHER_CTX *ctx)
1140 {
1141         int len = 0;
1142
1143         if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_CCM_SET_TAG, tag_len, tag) <= 0)
1144                 goto process_auth_decryption_ccm_err;
1145
1146         if (EVP_DecryptInit_ex(ctx, NULL, NULL, NULL, iv) <= 0)
1147                 goto process_auth_decryption_ccm_err;
1148
1149         if (EVP_DecryptUpdate(ctx, NULL, &len, NULL, srclen) <= 0)
1150                 goto process_auth_decryption_ccm_err;
1151
1152         if (aadlen > 0)
1153                 /*
1154                  * For AES-CCM, the actual AAD is placed
1155                  * 18 bytes after the start of the AAD field,
1156                  * according to the API.
1157                  */
1158                 if (EVP_DecryptUpdate(ctx, NULL, &len, aad + 18, aadlen) <= 0)
1159                         goto process_auth_decryption_ccm_err;
1160
1161         if (srclen > 0)
1162                 if (process_openssl_decryption_update(mbuf_src, offset, &dst,
1163                                 srclen, ctx))
1164                         return -EFAULT;
1165
1166         return 0;
1167
1168 process_auth_decryption_ccm_err:
1169         OPENSSL_LOG(ERR, "Process openssl auth decryption ccm failed");
1170         return -EINVAL;
1171 }
1172
1173 /** Process standard openssl auth algorithms */
1174 static int
1175 process_openssl_auth(struct rte_mbuf *mbuf_src, uint8_t *dst, int offset,
1176                 __rte_unused uint8_t *iv, __rte_unused EVP_PKEY * pkey,
1177                 int srclen, EVP_MD_CTX *ctx, const EVP_MD *algo)
1178 {
1179         size_t dstlen;
1180         struct rte_mbuf *m;
1181         int l, n = srclen;
1182         uint8_t *src;
1183
1184         for (m = mbuf_src; m != NULL && offset > rte_pktmbuf_data_len(m);
1185                         m = m->next)
1186                 offset -= rte_pktmbuf_data_len(m);
1187
1188         if (m == 0)
1189                 goto process_auth_err;
1190
1191         if (EVP_DigestInit_ex(ctx, algo, NULL) <= 0)
1192                 goto process_auth_err;
1193
1194         src = rte_pktmbuf_mtod_offset(m, uint8_t *, offset);
1195
1196         l = rte_pktmbuf_data_len(m) - offset;
1197         if (srclen <= l) {
1198                 if (EVP_DigestUpdate(ctx, (char *)src, srclen) <= 0)
1199                         goto process_auth_err;
1200                 goto process_auth_final;
1201         }
1202
1203         if (EVP_DigestUpdate(ctx, (char *)src, l) <= 0)
1204                 goto process_auth_err;
1205
1206         n -= l;
1207
1208         for (m = m->next; (m != NULL) && (n > 0); m = m->next) {
1209                 src = rte_pktmbuf_mtod(m, uint8_t *);
1210                 l = rte_pktmbuf_data_len(m) < n ? rte_pktmbuf_data_len(m) : n;
1211                 if (EVP_DigestUpdate(ctx, (char *)src, l) <= 0)
1212                         goto process_auth_err;
1213                 n -= l;
1214         }
1215
1216 process_auth_final:
1217         if (EVP_DigestFinal_ex(ctx, dst, (unsigned int *)&dstlen) <= 0)
1218                 goto process_auth_err;
1219         return 0;
1220
1221 process_auth_err:
1222         OPENSSL_LOG(ERR, "Process openssl auth failed");
1223         return -EINVAL;
1224 }
1225
1226 /** Process standard openssl auth algorithms with hmac */
1227 static int
1228 process_openssl_auth_hmac(struct rte_mbuf *mbuf_src, uint8_t *dst, int offset,
1229                 int srclen, HMAC_CTX *ctx)
1230 {
1231         unsigned int dstlen;
1232         struct rte_mbuf *m;
1233         int l, n = srclen;
1234         uint8_t *src;
1235
1236         for (m = mbuf_src; m != NULL && offset > rte_pktmbuf_data_len(m);
1237                         m = m->next)
1238                 offset -= rte_pktmbuf_data_len(m);
1239
1240         if (m == 0)
1241                 goto process_auth_err;
1242
1243         src = rte_pktmbuf_mtod_offset(m, uint8_t *, offset);
1244
1245         l = rte_pktmbuf_data_len(m) - offset;
1246         if (srclen <= l) {
1247                 if (HMAC_Update(ctx, (unsigned char *)src, srclen) != 1)
1248                         goto process_auth_err;
1249                 goto process_auth_final;
1250         }
1251
1252         if (HMAC_Update(ctx, (unsigned char *)src, l) != 1)
1253                 goto process_auth_err;
1254
1255         n -= l;
1256
1257         for (m = m->next; (m != NULL) && (n > 0); m = m->next) {
1258                 src = rte_pktmbuf_mtod(m, uint8_t *);
1259                 l = rte_pktmbuf_data_len(m) < n ? rte_pktmbuf_data_len(m) : n;
1260                 if (HMAC_Update(ctx, (unsigned char *)src, l) != 1)
1261                         goto process_auth_err;
1262                 n -= l;
1263         }
1264
1265 process_auth_final:
1266         if (HMAC_Final(ctx, dst, &dstlen) != 1)
1267                 goto process_auth_err;
1268
1269         if (unlikely(HMAC_Init_ex(ctx, NULL, 0, NULL, NULL) != 1))
1270                 goto process_auth_err;
1271
1272         return 0;
1273
1274 process_auth_err:
1275         OPENSSL_LOG(ERR, "Process openssl auth failed");
1276         return -EINVAL;
1277 }
1278
1279 /*----------------------------------------------------------------------------*/
1280
1281 /** Process auth/cipher combined operation */
1282 static void
1283 process_openssl_combined_op
1284                 (struct rte_crypto_op *op, struct openssl_session *sess,
1285                 struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
1286 {
1287         /* cipher */
1288         uint8_t *dst = NULL, *iv, *tag, *aad;
1289         int srclen, aadlen, status = -1;
1290         uint32_t offset;
1291         uint8_t taglen;
1292
1293         /*
1294          * Segmented destination buffer is not supported for
1295          * encryption/decryption
1296          */
1297         if (!rte_pktmbuf_is_contiguous(mbuf_dst)) {
1298                 op->status = RTE_CRYPTO_OP_STATUS_ERROR;
1299                 return;
1300         }
1301
1302         iv = rte_crypto_op_ctod_offset(op, uint8_t *,
1303                         sess->iv.offset);
1304         if (sess->auth.algo == RTE_CRYPTO_AUTH_AES_GMAC) {
1305                 srclen = 0;
1306                 offset = op->sym->auth.data.offset;
1307                 aadlen = op->sym->auth.data.length;
1308                 aad = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
1309                                 op->sym->auth.data.offset);
1310                 tag = op->sym->auth.digest.data;
1311                 if (tag == NULL)
1312                         tag = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
1313                                 offset + aadlen);
1314         } else {
1315                 srclen = op->sym->aead.data.length;
1316                 dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
1317                                 op->sym->aead.data.offset);
1318                 offset = op->sym->aead.data.offset;
1319                 aad = op->sym->aead.aad.data;
1320                 aadlen = sess->auth.aad_length;
1321                 tag = op->sym->aead.digest.data;
1322                 if (tag == NULL)
1323                         tag = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
1324                                 offset + srclen);
1325         }
1326
1327         taglen = sess->auth.digest_length;
1328
1329         if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT) {
1330                 if (sess->auth.algo == RTE_CRYPTO_AUTH_AES_GMAC ||
1331                                 sess->aead_algo == RTE_CRYPTO_AEAD_AES_GCM)
1332                         status = process_openssl_auth_encryption_gcm(
1333                                         mbuf_src, offset, srclen,
1334                                         aad, aadlen, iv,
1335                                         dst, tag, sess->cipher.ctx);
1336                 else
1337                         status = process_openssl_auth_encryption_ccm(
1338                                         mbuf_src, offset, srclen,
1339                                         aad, aadlen, iv,
1340                                         dst, tag, taglen, sess->cipher.ctx);
1341
1342         } else {
1343                 if (sess->auth.algo == RTE_CRYPTO_AUTH_AES_GMAC ||
1344                                 sess->aead_algo == RTE_CRYPTO_AEAD_AES_GCM)
1345                         status = process_openssl_auth_decryption_gcm(
1346                                         mbuf_src, offset, srclen,
1347                                         aad, aadlen, iv,
1348                                         dst, tag, sess->cipher.ctx);
1349                 else
1350                         status = process_openssl_auth_decryption_ccm(
1351                                         mbuf_src, offset, srclen,
1352                                         aad, aadlen, iv,
1353                                         dst, tag, taglen, sess->cipher.ctx);
1354         }
1355
1356         if (status != 0) {
1357                 if (status == (-EFAULT) &&
1358                                 sess->auth.operation ==
1359                                                 RTE_CRYPTO_AUTH_OP_VERIFY)
1360                         op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
1361                 else
1362                         op->status = RTE_CRYPTO_OP_STATUS_ERROR;
1363         }
1364 }
1365
1366 /** Process cipher operation */
1367 static void
1368 process_openssl_cipher_op
1369                 (struct rte_crypto_op *op, struct openssl_session *sess,
1370                 struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
1371 {
1372         uint8_t *dst, *iv;
1373         int srclen, status;
1374
1375         /*
1376          * Segmented destination buffer is not supported for
1377          * encryption/decryption
1378          */
1379         if (!rte_pktmbuf_is_contiguous(mbuf_dst)) {
1380                 op->status = RTE_CRYPTO_OP_STATUS_ERROR;
1381                 return;
1382         }
1383
1384         srclen = op->sym->cipher.data.length;
1385         dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
1386                         op->sym->cipher.data.offset);
1387
1388         iv = rte_crypto_op_ctod_offset(op, uint8_t *,
1389                         sess->iv.offset);
1390
1391         if (sess->cipher.mode == OPENSSL_CIPHER_LIB)
1392                 if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
1393                         status = process_openssl_cipher_encrypt(mbuf_src, dst,
1394                                         op->sym->cipher.data.offset, iv,
1395                                         srclen, sess->cipher.ctx);
1396                 else
1397                         status = process_openssl_cipher_decrypt(mbuf_src, dst,
1398                                         op->sym->cipher.data.offset, iv,
1399                                         srclen, sess->cipher.ctx);
1400         else
1401                 status = process_openssl_cipher_des3ctr(mbuf_src, dst,
1402                                 op->sym->cipher.data.offset, iv,
1403                                 sess->cipher.key.data, srclen,
1404                                 sess->cipher.ctx);
1405
1406         if (status != 0)
1407                 op->status = RTE_CRYPTO_OP_STATUS_ERROR;
1408 }
1409
1410 /** Process cipher operation */
1411 static void
1412 process_openssl_docsis_bpi_op(struct rte_crypto_op *op,
1413                 struct openssl_session *sess, struct rte_mbuf *mbuf_src,
1414                 struct rte_mbuf *mbuf_dst)
1415 {
1416         uint8_t *src, *dst, *iv;
1417         uint8_t block_size, last_block_len;
1418         int srclen, status = 0;
1419
1420         srclen = op->sym->cipher.data.length;
1421         src = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
1422                         op->sym->cipher.data.offset);
1423         dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
1424                         op->sym->cipher.data.offset);
1425
1426         iv = rte_crypto_op_ctod_offset(op, uint8_t *,
1427                         sess->iv.offset);
1428
1429         block_size = DES_BLOCK_SIZE;
1430
1431         last_block_len = srclen % block_size;
1432         if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT) {
1433                 /* Encrypt only with ECB mode XOR IV */
1434                 if (srclen < block_size) {
1435                         status = process_openssl_cipher_bpi_encrypt(src, dst,
1436                                         iv, srclen,
1437                                         sess->cipher.bpi_ctx);
1438                 } else {
1439                         srclen -= last_block_len;
1440                         /* Encrypt with the block aligned stream with CBC mode */
1441                         status = process_openssl_cipher_encrypt(mbuf_src, dst,
1442                                         op->sym->cipher.data.offset, iv,
1443                                         srclen, sess->cipher.ctx);
1444                         if (last_block_len) {
1445                                 /* Point at last block */
1446                                 dst += srclen;
1447                                 /*
1448                                  * IV is the last encrypted block from
1449                                  * the previous operation
1450                                  */
1451                                 iv = dst - block_size;
1452                                 src += srclen;
1453                                 srclen = last_block_len;
1454                                 /* Encrypt the last frame with ECB mode */
1455                                 status |= process_openssl_cipher_bpi_encrypt(src,
1456                                                 dst, iv,
1457                                                 srclen, sess->cipher.bpi_ctx);
1458                         }
1459                 }
1460         } else {
1461                 /* Decrypt only with ECB mode (encrypt, as it is same operation) */
1462                 if (srclen < block_size) {
1463                         status = process_openssl_cipher_bpi_encrypt(src, dst,
1464                                         iv,
1465                                         srclen,
1466                                         sess->cipher.bpi_ctx);
1467                 } else {
1468                         if (last_block_len) {
1469                                 /* Point at last block */
1470                                 dst += srclen - last_block_len;
1471                                 src += srclen - last_block_len;
1472                                 /*
1473                                  * IV is the last full block
1474                                  */
1475                                 iv = src - block_size;
1476                                 /*
1477                                  * Decrypt the last frame with ECB mode
1478                                  * (encrypt, as it is the same operation)
1479                                  */
1480                                 status = process_openssl_cipher_bpi_encrypt(src,
1481                                                 dst, iv,
1482                                                 last_block_len, sess->cipher.bpi_ctx);
1483                                 /* Prepare parameters for CBC mode op */
1484                                 iv = rte_crypto_op_ctod_offset(op, uint8_t *,
1485                                                 sess->iv.offset);
1486                                 dst += last_block_len - srclen;
1487                                 srclen -= last_block_len;
1488                         }
1489
1490                         /* Decrypt with CBC mode */
1491                         status |= process_openssl_cipher_decrypt(mbuf_src, dst,
1492                                         op->sym->cipher.data.offset, iv,
1493                                         srclen, sess->cipher.ctx);
1494                 }
1495         }
1496
1497         if (status != 0)
1498                 op->status = RTE_CRYPTO_OP_STATUS_ERROR;
1499 }
1500
1501 /** Process auth operation */
1502 static void
1503 process_openssl_auth_op(struct openssl_qp *qp, struct rte_crypto_op *op,
1504                 struct openssl_session *sess, struct rte_mbuf *mbuf_src,
1505                 struct rte_mbuf *mbuf_dst)
1506 {
1507         uint8_t *dst;
1508         int srclen, status;
1509
1510         srclen = op->sym->auth.data.length;
1511
1512         if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY)
1513                 dst = qp->temp_digest;
1514         else {
1515                 dst = op->sym->auth.digest.data;
1516                 if (dst == NULL)
1517                         dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
1518                                         op->sym->auth.data.offset +
1519                                         op->sym->auth.data.length);
1520         }
1521
1522         switch (sess->auth.mode) {
1523         case OPENSSL_AUTH_AS_AUTH:
1524                 status = process_openssl_auth(mbuf_src, dst,
1525                                 op->sym->auth.data.offset, NULL, NULL, srclen,
1526                                 sess->auth.auth.ctx, sess->auth.auth.evp_algo);
1527                 break;
1528         case OPENSSL_AUTH_AS_HMAC:
1529                 status = process_openssl_auth_hmac(mbuf_src, dst,
1530                                 op->sym->auth.data.offset, srclen,
1531                                 sess->auth.hmac.ctx);
1532                 break;
1533         default:
1534                 status = -1;
1535                 break;
1536         }
1537
1538         if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) {
1539                 if (memcmp(dst, op->sym->auth.digest.data,
1540                                 sess->auth.digest_length) != 0) {
1541                         op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
1542                 }
1543         }
1544
1545         if (status != 0)
1546                 op->status = RTE_CRYPTO_OP_STATUS_ERROR;
1547 }
1548
1549 /* process dsa sign operation */
1550 static int
1551 process_openssl_dsa_sign_op(struct rte_crypto_op *cop,
1552                 struct openssl_asym_session *sess)
1553 {
1554         struct rte_crypto_dsa_op_param *op = &cop->asym->dsa;
1555         DSA *dsa = sess->u.s.dsa;
1556         DSA_SIG *sign = NULL;
1557
1558         sign = DSA_do_sign(op->message.data,
1559                         op->message.length,
1560                         dsa);
1561
1562         if (sign == NULL) {
1563                 OPENSSL_LOG(ERR, "%s:%d\n", __func__, __LINE__);
1564                 cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
1565         } else {
1566                 const BIGNUM *r = NULL, *s = NULL;
1567                 get_dsa_sign(sign, r, s);
1568
1569                 op->r.length = BN_bn2bin(r, op->r.data);
1570                 op->s.length = BN_bn2bin(s, op->s.data);
1571                 cop->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
1572         }
1573
1574         DSA_SIG_free(sign);
1575
1576         return 0;
1577 }
1578
1579 /* process dsa verify operation */
1580 static int
1581 process_openssl_dsa_verify_op(struct rte_crypto_op *cop,
1582                 struct openssl_asym_session *sess)
1583 {
1584         struct rte_crypto_dsa_op_param *op = &cop->asym->dsa;
1585         DSA *dsa = sess->u.s.dsa;
1586         int ret;
1587         DSA_SIG *sign = DSA_SIG_new();
1588         BIGNUM *r = NULL, *s = NULL;
1589         BIGNUM *pub_key = NULL;
1590
1591         if (sign == NULL) {
1592                 OPENSSL_LOG(ERR, " %s:%d\n", __func__, __LINE__);
1593                 cop->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
1594                 return -1;
1595         }
1596
1597         r = BN_bin2bn(op->r.data,
1598                         op->r.length,
1599                         r);
1600         s = BN_bin2bn(op->s.data,
1601                         op->s.length,
1602                         s);
1603         pub_key = BN_bin2bn(op->y.data,
1604                         op->y.length,
1605                         pub_key);
1606         if (!r || !s || !pub_key) {
1607                 if (r)
1608                         BN_free(r);
1609                 if (s)
1610                         BN_free(s);
1611                 if (pub_key)
1612                         BN_free(pub_key);
1613
1614                 cop->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
1615                 return -1;
1616         }
1617         set_dsa_sign(sign, r, s);
1618         set_dsa_pub_key(dsa, pub_key);
1619
1620         ret = DSA_do_verify(op->message.data,
1621                         op->message.length,
1622                         sign,
1623                         dsa);
1624
1625         if (ret != 1)
1626                 cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
1627         else
1628                 cop->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
1629
1630         DSA_SIG_free(sign);
1631
1632         return 0;
1633 }
1634
1635 /* process dh operation */
1636 static int
1637 process_openssl_dh_op(struct rte_crypto_op *cop,
1638                 struct openssl_asym_session *sess)
1639 {
1640         struct rte_crypto_dh_op_param *op = &cop->asym->dh;
1641         DH *dh_key = sess->u.dh.dh_key;
1642         BIGNUM *priv_key = NULL;
1643         int ret = 0;
1644
1645         if (sess->u.dh.key_op &
1646                         (1 << RTE_CRYPTO_ASYM_OP_SHARED_SECRET_COMPUTE)) {
1647                 /* compute shared secret using peer public key
1648                  * and current private key
1649                  * shared secret = peer_key ^ priv_key mod p
1650                  */
1651                 BIGNUM *peer_key = NULL;
1652
1653                 /* copy private key and peer key and compute shared secret */
1654                 peer_key = BN_bin2bn(op->pub_key.data,
1655                                 op->pub_key.length,
1656                                 peer_key);
1657                 if (peer_key == NULL) {
1658                         cop->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
1659                         return -1;
1660                 }
1661                 priv_key = BN_bin2bn(op->priv_key.data,
1662                                 op->priv_key.length,
1663                                 priv_key);
1664                 if (priv_key == NULL) {
1665                         BN_free(peer_key);
1666                         cop->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
1667                         return -1;
1668                 }
1669                 set_dh_priv_key(dh_key, priv_key, ret);
1670                 if (ret) {
1671                         OPENSSL_LOG(ERR, "Failed to set private key\n");
1672                         cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
1673                         BN_free(peer_key);
1674                         BN_free(priv_key);
1675                         return 0;
1676                 }
1677
1678                 ret = DH_compute_key(
1679                                 op->shared_secret.data,
1680                                 peer_key, dh_key);
1681                 if (ret < 0) {
1682                         cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
1683                         BN_free(peer_key);
1684                         /* priv key is already loaded into dh,
1685                          * let's not free that directly here.
1686                          * DH_free() will auto free it later.
1687                          */
1688                         return 0;
1689                 }
1690                 cop->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
1691                 op->shared_secret.length = ret;
1692                 BN_free(peer_key);
1693                 return 0;
1694         }
1695
1696         /*
1697          * other options are public and private key generations.
1698          *
1699          * if user provides private key,
1700          * then first set DH with user provided private key
1701          */
1702         if ((sess->u.dh.key_op &
1703                         (1 << RTE_CRYPTO_ASYM_OP_PUBLIC_KEY_GENERATE)) &&
1704                         !(sess->u.dh.key_op &
1705                         (1 << RTE_CRYPTO_ASYM_OP_PRIVATE_KEY_GENERATE))) {
1706                 /* generate public key using user-provided private key
1707                  * pub_key = g ^ priv_key mod p
1708                  */
1709
1710                 /* load private key into DH */
1711                 priv_key = BN_bin2bn(op->priv_key.data,
1712                                 op->priv_key.length,
1713                                 priv_key);
1714                 if (priv_key == NULL) {
1715                         cop->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
1716                         return -1;
1717                 }
1718                 set_dh_priv_key(dh_key, priv_key, ret);
1719                 if (ret) {
1720                         OPENSSL_LOG(ERR, "Failed to set private key\n");
1721                         cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
1722                         BN_free(priv_key);
1723                         return 0;
1724                 }
1725         }
1726
1727         /* generate public and private key pair.
1728          *
1729          * if private key already set, generates only public key.
1730          *
1731          * if private key is not already set, then set it to random value
1732          * and update internal private key.
1733          */
1734         if (!DH_generate_key(dh_key)) {
1735                 cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
1736                 return 0;
1737         }
1738
1739         if (sess->u.dh.key_op & (1 << RTE_CRYPTO_ASYM_OP_PUBLIC_KEY_GENERATE)) {
1740                 const BIGNUM *pub_key = NULL;
1741
1742                 OPENSSL_LOG(DEBUG, "%s:%d update public key\n",
1743                                 __func__, __LINE__);
1744
1745                 /* get the generated keys */
1746                 get_dh_pub_key(dh_key, pub_key);
1747
1748                 /* output public key */
1749                 op->pub_key.length = BN_bn2bin(pub_key,
1750                                 op->pub_key.data);
1751         }
1752
1753         if (sess->u.dh.key_op &
1754                         (1 << RTE_CRYPTO_ASYM_OP_PRIVATE_KEY_GENERATE)) {
1755                 const BIGNUM *priv_key = NULL;
1756
1757                 OPENSSL_LOG(DEBUG, "%s:%d updated priv key\n",
1758                                 __func__, __LINE__);
1759
1760                 /* get the generated keys */
1761                 get_dh_priv_key(dh_key, priv_key);
1762
1763                 /* provide generated private key back to user */
1764                 op->priv_key.length = BN_bn2bin(priv_key,
1765                                 op->priv_key.data);
1766         }
1767
1768         cop->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
1769
1770         return 0;
1771 }
1772
1773 /* process modinv operation */
1774 static int
1775 process_openssl_modinv_op(struct rte_crypto_op *cop,
1776                 struct openssl_asym_session *sess)
1777 {
1778         struct rte_crypto_asym_op *op = cop->asym;
1779         BIGNUM *base = BN_CTX_get(sess->u.m.ctx);
1780         BIGNUM *res = BN_CTX_get(sess->u.m.ctx);
1781
1782         if (unlikely(base == NULL || res == NULL)) {
1783                 if (base)
1784                         BN_free(base);
1785                 if (res)
1786                         BN_free(res);
1787                 cop->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
1788                 return -1;
1789         }
1790
1791         base = BN_bin2bn((const unsigned char *)op->modinv.base.data,
1792                         op->modinv.base.length, base);
1793
1794         if (BN_mod_inverse(res, base, sess->u.m.modulus, sess->u.m.ctx)) {
1795                 cop->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
1796                 op->modinv.base.length = BN_bn2bin(res, op->modinv.base.data);
1797         } else {
1798                 cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
1799         }
1800
1801         return 0;
1802 }
1803
1804 /* process modexp operation */
1805 static int
1806 process_openssl_modexp_op(struct rte_crypto_op *cop,
1807                 struct openssl_asym_session *sess)
1808 {
1809         struct rte_crypto_asym_op *op = cop->asym;
1810         BIGNUM *base = BN_CTX_get(sess->u.e.ctx);
1811         BIGNUM *res = BN_CTX_get(sess->u.e.ctx);
1812
1813         if (unlikely(base == NULL || res == NULL)) {
1814                 if (base)
1815                         BN_free(base);
1816                 if (res)
1817                         BN_free(res);
1818                 cop->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
1819                 return -1;
1820         }
1821
1822         base = BN_bin2bn((const unsigned char *)op->modinv.base.data,
1823                         op->modinv.base.length, base);
1824
1825         if (BN_mod_exp(res, base, sess->u.e.exp,
1826                                 sess->u.e.mod, sess->u.e.ctx)) {
1827                 op->modinv.base.length = BN_bn2bin(res, op->modinv.base.data);
1828                 cop->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
1829         } else {
1830                 cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
1831         }
1832
1833         return 0;
1834 }
1835
1836 /* process rsa operations */
1837 static int
1838 process_openssl_rsa_op(struct rte_crypto_op *cop,
1839                 struct openssl_asym_session *sess)
1840 {
1841         int ret = 0;
1842         struct rte_crypto_asym_op *op = cop->asym;
1843         RSA *rsa = sess->u.r.rsa;
1844         uint32_t pad = (op->rsa.pad);
1845
1846         switch (pad) {
1847         case RTE_CRYPTO_RSA_PKCS1_V1_5_BT0:
1848         case RTE_CRYPTO_RSA_PKCS1_V1_5_BT1:
1849         case RTE_CRYPTO_RSA_PKCS1_V1_5_BT2:
1850                 pad = RSA_PKCS1_PADDING;
1851                 break;
1852         case RTE_CRYPTO_RSA_PADDING_NONE:
1853                 pad = RSA_NO_PADDING;
1854                 break;
1855         default:
1856                 cop->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
1857                 OPENSSL_LOG(ERR,
1858                                 "rsa pad type not supported %d\n", pad);
1859                 return 0;
1860         }
1861
1862         switch (op->rsa.op_type) {
1863         case RTE_CRYPTO_ASYM_OP_ENCRYPT:
1864                 ret = RSA_public_encrypt(op->rsa.message.length,
1865                                 op->rsa.message.data,
1866                                 op->rsa.message.data,
1867                                 rsa,
1868                                 pad);
1869
1870                 if (ret > 0)
1871                         op->rsa.message.length = ret;
1872                 OPENSSL_LOG(DEBUG,
1873                                 "length of encrypted text %d\n", ret);
1874                 break;
1875
1876         case RTE_CRYPTO_ASYM_OP_DECRYPT:
1877                 ret = RSA_private_decrypt(op->rsa.message.length,
1878                                 op->rsa.message.data,
1879                                 op->rsa.message.data,
1880                                 rsa,
1881                                 pad);
1882                 if (ret > 0)
1883                         op->rsa.message.length = ret;
1884                 break;
1885
1886         case RTE_CRYPTO_ASYM_OP_SIGN:
1887                 ret = RSA_private_encrypt(op->rsa.message.length,
1888                                 op->rsa.message.data,
1889                                 op->rsa.sign.data,
1890                                 rsa,
1891                                 pad);
1892                 if (ret > 0)
1893                         op->rsa.sign.length = ret;
1894                 break;
1895
1896         case RTE_CRYPTO_ASYM_OP_VERIFY:
1897                 ret = RSA_public_decrypt(op->rsa.sign.length,
1898                                 op->rsa.sign.data,
1899                                 op->rsa.sign.data,
1900                                 rsa,
1901                                 pad);
1902
1903                 OPENSSL_LOG(DEBUG,
1904                                 "Length of public_decrypt %d "
1905                                 "length of message %zd\n",
1906                                 ret, op->rsa.message.length);
1907
1908                 if (memcmp(op->rsa.sign.data, op->rsa.message.data,
1909                                         op->rsa.message.length)) {
1910                         OPENSSL_LOG(ERR,
1911                                         "RSA sign Verification failed");
1912                         return -1;
1913                 }
1914                 break;
1915
1916         default:
1917                 /* allow ops with invalid args to be pushed to
1918                  * completion queue
1919                  */
1920                 cop->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
1921                 break;
1922         }
1923
1924         if (ret < 0)
1925                 cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
1926
1927         return 0;
1928 }
1929
1930 static int
1931 process_asym_op(struct openssl_qp *qp, struct rte_crypto_op *op,
1932                 struct openssl_asym_session *sess)
1933 {
1934         int retval = 0;
1935
1936         op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
1937
1938         switch (sess->xfrm_type) {
1939         case RTE_CRYPTO_ASYM_XFORM_RSA:
1940                 retval = process_openssl_rsa_op(op, sess);
1941                 break;
1942         case RTE_CRYPTO_ASYM_XFORM_MODEX:
1943                 retval = process_openssl_modexp_op(op, sess);
1944                 break;
1945         case RTE_CRYPTO_ASYM_XFORM_MODINV:
1946                 retval = process_openssl_modinv_op(op, sess);
1947                 break;
1948         case RTE_CRYPTO_ASYM_XFORM_DH:
1949                 retval = process_openssl_dh_op(op, sess);
1950                 break;
1951         case RTE_CRYPTO_ASYM_XFORM_DSA:
1952                 if (op->asym->dsa.op_type == RTE_CRYPTO_ASYM_OP_SIGN)
1953                         retval = process_openssl_dsa_sign_op(op, sess);
1954                 else if (op->asym->dsa.op_type ==
1955                                 RTE_CRYPTO_ASYM_OP_VERIFY)
1956                         retval =
1957                                 process_openssl_dsa_verify_op(op, sess);
1958                 else
1959                         op->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
1960                 break;
1961         default:
1962                 op->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
1963                 break;
1964         }
1965         if (!retval) {
1966                 /* op processed so push to completion queue as processed */
1967                 retval = rte_ring_enqueue(qp->processed_ops, (void *)op);
1968                 if (retval)
1969                         /* return error if failed to put in completion queue */
1970                         retval = -1;
1971         }
1972
1973         return retval;
1974 }
1975
1976 /** Process crypto operation for mbuf */
1977 static int
1978 process_op(struct openssl_qp *qp, struct rte_crypto_op *op,
1979                 struct openssl_session *sess)
1980 {
1981         struct rte_mbuf *msrc, *mdst;
1982         int retval;
1983
1984         msrc = op->sym->m_src;
1985         mdst = op->sym->m_dst ? op->sym->m_dst : op->sym->m_src;
1986
1987         op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
1988
1989         switch (sess->chain_order) {
1990         case OPENSSL_CHAIN_ONLY_CIPHER:
1991                 process_openssl_cipher_op(op, sess, msrc, mdst);
1992                 break;
1993         case OPENSSL_CHAIN_ONLY_AUTH:
1994                 process_openssl_auth_op(qp, op, sess, msrc, mdst);
1995                 break;
1996         case OPENSSL_CHAIN_CIPHER_AUTH:
1997                 process_openssl_cipher_op(op, sess, msrc, mdst);
1998                 process_openssl_auth_op(qp, op, sess, mdst, mdst);
1999                 break;
2000         case OPENSSL_CHAIN_AUTH_CIPHER:
2001                 process_openssl_auth_op(qp, op, sess, msrc, mdst);
2002                 process_openssl_cipher_op(op, sess, msrc, mdst);
2003                 break;
2004         case OPENSSL_CHAIN_COMBINED:
2005                 process_openssl_combined_op(op, sess, msrc, mdst);
2006                 break;
2007         case OPENSSL_CHAIN_CIPHER_BPI:
2008                 process_openssl_docsis_bpi_op(op, sess, msrc, mdst);
2009                 break;
2010         default:
2011                 op->status = RTE_CRYPTO_OP_STATUS_ERROR;
2012                 break;
2013         }
2014
2015         /* Free session if a session-less crypto op */
2016         if (op->sess_type == RTE_CRYPTO_OP_SESSIONLESS) {
2017                 openssl_reset_session(sess);
2018                 memset(sess, 0, sizeof(struct openssl_session));
2019                 memset(op->sym->session, 0,
2020                                 rte_cryptodev_sym_get_header_session_size());
2021                 rte_mempool_put(qp->sess_mp, sess);
2022                 rte_mempool_put(qp->sess_mp, op->sym->session);
2023                 op->sym->session = NULL;
2024         }
2025
2026         if (op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED)
2027                 op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
2028
2029         if (op->status != RTE_CRYPTO_OP_STATUS_ERROR)
2030                 retval = rte_ring_enqueue(qp->processed_ops, (void *)op);
2031         else
2032                 retval = -1;
2033
2034         return retval;
2035 }
2036
2037 /*
2038  *------------------------------------------------------------------------------
2039  * PMD Framework
2040  *------------------------------------------------------------------------------
2041  */
2042
2043 /** Enqueue burst */
2044 static uint16_t
2045 openssl_pmd_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
2046                 uint16_t nb_ops)
2047 {
2048         void *sess;
2049         struct openssl_qp *qp = queue_pair;
2050         int i, retval;
2051
2052         for (i = 0; i < nb_ops; i++) {
2053                 sess = get_session(qp, ops[i]);
2054                 if (unlikely(sess == NULL))
2055                         goto enqueue_err;
2056
2057                 if (ops[i]->type == RTE_CRYPTO_OP_TYPE_SYMMETRIC)
2058                         retval = process_op(qp, ops[i],
2059                                         (struct openssl_session *) sess);
2060                 else
2061                         retval = process_asym_op(qp, ops[i],
2062                                         (struct openssl_asym_session *) sess);
2063                 if (unlikely(retval < 0))
2064                         goto enqueue_err;
2065         }
2066
2067         qp->stats.enqueued_count += i;
2068         return i;
2069
2070 enqueue_err:
2071         qp->stats.enqueue_err_count++;
2072         return i;
2073 }
2074
2075 /** Dequeue burst */
2076 static uint16_t
2077 openssl_pmd_dequeue_burst(void *queue_pair, struct rte_crypto_op **ops,
2078                 uint16_t nb_ops)
2079 {
2080         struct openssl_qp *qp = queue_pair;
2081
2082         unsigned int nb_dequeued = 0;
2083
2084         nb_dequeued = rte_ring_dequeue_burst(qp->processed_ops,
2085                         (void **)ops, nb_ops, NULL);
2086         qp->stats.dequeued_count += nb_dequeued;
2087
2088         return nb_dequeued;
2089 }
2090
2091 /** Create OPENSSL crypto device */
2092 static int
2093 cryptodev_openssl_create(const char *name,
2094                         struct rte_vdev_device *vdev,
2095                         struct rte_cryptodev_pmd_init_params *init_params)
2096 {
2097         struct rte_cryptodev *dev;
2098         struct openssl_private *internals;
2099
2100         dev = rte_cryptodev_pmd_create(name, &vdev->device, init_params);
2101         if (dev == NULL) {
2102                 OPENSSL_LOG(ERR, "failed to create cryptodev vdev");
2103                 goto init_error;
2104         }
2105
2106         dev->driver_id = cryptodev_driver_id;
2107         dev->dev_ops = rte_openssl_pmd_ops;
2108
2109         /* register rx/tx burst functions for data path */
2110         dev->dequeue_burst = openssl_pmd_dequeue_burst;
2111         dev->enqueue_burst = openssl_pmd_enqueue_burst;
2112
2113         dev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
2114                         RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
2115                         RTE_CRYPTODEV_FF_CPU_AESNI |
2116                         RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT |
2117                         RTE_CRYPTODEV_FF_OOP_LB_IN_LB_OUT |
2118                         RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO;
2119
2120         /* Set vector instructions mode supported */
2121         internals = dev->data->dev_private;
2122
2123         internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
2124
2125         return 0;
2126
2127 init_error:
2128         OPENSSL_LOG(ERR, "driver %s: create failed",
2129                         init_params->name);
2130
2131         cryptodev_openssl_remove(vdev);
2132         return -EFAULT;
2133 }
2134
2135 /** Initialise OPENSSL crypto device */
2136 static int
2137 cryptodev_openssl_probe(struct rte_vdev_device *vdev)
2138 {
2139         struct rte_cryptodev_pmd_init_params init_params = {
2140                 "",
2141                 sizeof(struct openssl_private),
2142                 rte_socket_id(),
2143                 RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS
2144         };
2145         const char *name;
2146         const char *input_args;
2147
2148         name = rte_vdev_device_name(vdev);
2149         if (name == NULL)
2150                 return -EINVAL;
2151         input_args = rte_vdev_device_args(vdev);
2152
2153         rte_cryptodev_pmd_parse_input_args(&init_params, input_args);
2154
2155         return cryptodev_openssl_create(name, vdev, &init_params);
2156 }
2157
2158 /** Uninitialise OPENSSL crypto device */
2159 static int
2160 cryptodev_openssl_remove(struct rte_vdev_device *vdev)
2161 {
2162         struct rte_cryptodev *cryptodev;
2163         const char *name;
2164
2165         name = rte_vdev_device_name(vdev);
2166         if (name == NULL)
2167                 return -EINVAL;
2168
2169         cryptodev = rte_cryptodev_pmd_get_named_dev(name);
2170         if (cryptodev == NULL)
2171                 return -ENODEV;
2172
2173         return rte_cryptodev_pmd_destroy(cryptodev);
2174 }
2175
2176 static struct rte_vdev_driver cryptodev_openssl_pmd_drv = {
2177         .probe = cryptodev_openssl_probe,
2178         .remove = cryptodev_openssl_remove
2179 };
2180
2181 static struct cryptodev_driver openssl_crypto_drv;
2182
2183 RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_OPENSSL_PMD,
2184         cryptodev_openssl_pmd_drv);
2185 RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_OPENSSL_PMD,
2186         "max_nb_queue_pairs=<int> "
2187         "socket_id=<int>");
2188 RTE_PMD_REGISTER_CRYPTO_DRIVER(openssl_crypto_drv,
2189                 cryptodev_openssl_pmd_drv.driver, cryptodev_driver_id);
2190
2191 RTE_INIT(openssl_init_log)
2192 {
2193         openssl_logtype_driver = rte_log_register("pmd.crypto.openssl");
2194 }