New upstream version 18.08
[deb_dpdk.git] / drivers / net / mlx4 / mlx4_ethdev.c
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright 2017 6WIND S.A.
3  * Copyright 2017 Mellanox Technologies, Ltd
4  */
5
6 /**
7  * @file
8  * Miscellaneous control operations for mlx4 driver.
9  */
10
11 #include <assert.h>
12 #include <dirent.h>
13 #include <errno.h>
14 #include <linux/ethtool.h>
15 #include <linux/sockios.h>
16 #include <net/if.h>
17 #include <netinet/ip.h>
18 #include <stddef.h>
19 #include <stdint.h>
20 #include <stdio.h>
21 #include <stdlib.h>
22 #include <string.h>
23 #include <sys/ioctl.h>
24 #include <sys/socket.h>
25 #include <unistd.h>
26
27 /* Verbs headers do not support -pedantic. */
28 #ifdef PEDANTIC
29 #pragma GCC diagnostic ignored "-Wpedantic"
30 #endif
31 #include <infiniband/verbs.h>
32 #ifdef PEDANTIC
33 #pragma GCC diagnostic error "-Wpedantic"
34 #endif
35
36 #include <rte_bus_pci.h>
37 #include <rte_errno.h>
38 #include <rte_ethdev_driver.h>
39 #include <rte_ether.h>
40 #include <rte_flow.h>
41 #include <rte_pci.h>
42 #include <rte_string_fns.h>
43
44 #include "mlx4.h"
45 #include "mlx4_flow.h"
46 #include "mlx4_glue.h"
47 #include "mlx4_rxtx.h"
48 #include "mlx4_utils.h"
49
50 /**
51  * Get interface name from private structure.
52  *
53  * @param[in] priv
54  *   Pointer to private structure.
55  * @param[out] ifname
56  *   Interface name output buffer.
57  *
58  * @return
59  *   0 on success, negative errno value otherwise and rte_errno is set.
60  */
61 int
62 mlx4_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE])
63 {
64         DIR *dir;
65         struct dirent *dent;
66         unsigned int dev_type = 0;
67         unsigned int dev_port_prev = ~0u;
68         char match[IF_NAMESIZE] = "";
69
70         {
71                 MKSTR(path, "%s/device/net", priv->ctx->device->ibdev_path);
72
73                 dir = opendir(path);
74                 if (dir == NULL) {
75                         rte_errno = errno;
76                         return -rte_errno;
77                 }
78         }
79         while ((dent = readdir(dir)) != NULL) {
80                 char *name = dent->d_name;
81                 FILE *file;
82                 unsigned int dev_port;
83                 int r;
84
85                 if ((name[0] == '.') &&
86                     ((name[1] == '\0') ||
87                      ((name[1] == '.') && (name[2] == '\0'))))
88                         continue;
89
90                 MKSTR(path, "%s/device/net/%s/%s",
91                       priv->ctx->device->ibdev_path, name,
92                       (dev_type ? "dev_id" : "dev_port"));
93
94                 file = fopen(path, "rb");
95                 if (file == NULL) {
96                         if (errno != ENOENT)
97                                 continue;
98                         /*
99                          * Switch to dev_id when dev_port does not exist as
100                          * is the case with Linux kernel versions < 3.15.
101                          */
102 try_dev_id:
103                         match[0] = '\0';
104                         if (dev_type)
105                                 break;
106                         dev_type = 1;
107                         dev_port_prev = ~0u;
108                         rewinddir(dir);
109                         continue;
110                 }
111                 r = fscanf(file, (dev_type ? "%x" : "%u"), &dev_port);
112                 fclose(file);
113                 if (r != 1)
114                         continue;
115                 /*
116                  * Switch to dev_id when dev_port returns the same value for
117                  * all ports. May happen when using a MOFED release older than
118                  * 3.0 with a Linux kernel >= 3.15.
119                  */
120                 if (dev_port == dev_port_prev)
121                         goto try_dev_id;
122                 dev_port_prev = dev_port;
123                 if (dev_port == (priv->port - 1u))
124                         strlcpy(match, name, sizeof(match));
125         }
126         closedir(dir);
127         if (match[0] == '\0') {
128                 rte_errno = ENODEV;
129                 return -rte_errno;
130         }
131         strncpy(*ifname, match, sizeof(*ifname));
132         return 0;
133 }
134
135 /**
136  * Perform ifreq ioctl() on associated Ethernet device.
137  *
138  * @param[in] priv
139  *   Pointer to private structure.
140  * @param req
141  *   Request number to pass to ioctl().
142  * @param[out] ifr
143  *   Interface request structure output buffer.
144  *
145  * @return
146  *   0 on success, negative errno value otherwise and rte_errno is set.
147  */
148 static int
149 mlx4_ifreq(const struct priv *priv, int req, struct ifreq *ifr)
150 {
151         int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
152         int ret;
153
154         if (sock == -1) {
155                 rte_errno = errno;
156                 return -rte_errno;
157         }
158         ret = mlx4_get_ifname(priv, &ifr->ifr_name);
159         if (!ret && ioctl(sock, req, ifr) == -1) {
160                 rte_errno = errno;
161                 ret = -rte_errno;
162         }
163         close(sock);
164         return ret;
165 }
166
167 /**
168  * Get MAC address by querying netdevice.
169  *
170  * @param[in] priv
171  *   Pointer to private structure.
172  * @param[out] mac
173  *   MAC address output buffer.
174  *
175  * @return
176  *   0 on success, negative errno value otherwise and rte_errno is set.
177  */
178 int
179 mlx4_get_mac(struct priv *priv, uint8_t (*mac)[ETHER_ADDR_LEN])
180 {
181         struct ifreq request;
182         int ret = mlx4_ifreq(priv, SIOCGIFHWADDR, &request);
183
184         if (ret)
185                 return ret;
186         memcpy(mac, request.ifr_hwaddr.sa_data, ETHER_ADDR_LEN);
187         return 0;
188 }
189
190 /**
191  * Get device MTU.
192  *
193  * @param priv
194  *   Pointer to private structure.
195  * @param[out] mtu
196  *   MTU value output buffer.
197  *
198  * @return
199  *   0 on success, negative errno value otherwise and rte_errno is set.
200  */
201 int
202 mlx4_mtu_get(struct priv *priv, uint16_t *mtu)
203 {
204         struct ifreq request;
205         int ret = mlx4_ifreq(priv, SIOCGIFMTU, &request);
206
207         if (ret)
208                 return ret;
209         *mtu = request.ifr_mtu;
210         return 0;
211 }
212
213 /**
214  * DPDK callback to change the MTU.
215  *
216  * @param priv
217  *   Pointer to Ethernet device structure.
218  * @param mtu
219  *   MTU value to set.
220  *
221  * @return
222  *   0 on success, negative errno value otherwise and rte_errno is set.
223  */
224 int
225 mlx4_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
226 {
227         struct priv *priv = dev->data->dev_private;
228         struct ifreq request = { .ifr_mtu = mtu, };
229         int ret = mlx4_ifreq(priv, SIOCSIFMTU, &request);
230
231         if (ret)
232                 return ret;
233         priv->mtu = mtu;
234         return 0;
235 }
236
237 /**
238  * Set device flags.
239  *
240  * @param priv
241  *   Pointer to private structure.
242  * @param keep
243  *   Bitmask for flags that must remain untouched.
244  * @param flags
245  *   Bitmask for flags to modify.
246  *
247  * @return
248  *   0 on success, negative errno value otherwise and rte_errno is set.
249  */
250 static int
251 mlx4_set_flags(struct priv *priv, unsigned int keep, unsigned int flags)
252 {
253         struct ifreq request;
254         int ret = mlx4_ifreq(priv, SIOCGIFFLAGS, &request);
255
256         if (ret)
257                 return ret;
258         request.ifr_flags &= keep;
259         request.ifr_flags |= flags & ~keep;
260         return mlx4_ifreq(priv, SIOCSIFFLAGS, &request);
261 }
262
263 /**
264  * Change the link state (UP / DOWN).
265  *
266  * @param priv
267  *   Pointer to Ethernet device private data.
268  * @param up
269  *   Nonzero for link up, otherwise link down.
270  *
271  * @return
272  *   0 on success, negative errno value otherwise and rte_errno is set.
273  */
274 static int
275 mlx4_dev_set_link(struct priv *priv, int up)
276 {
277         int err;
278
279         if (up) {
280                 err = mlx4_set_flags(priv, ~IFF_UP, IFF_UP);
281                 if (err)
282                         return err;
283         } else {
284                 err = mlx4_set_flags(priv, ~IFF_UP, ~IFF_UP);
285                 if (err)
286                         return err;
287         }
288         return 0;
289 }
290
291 /**
292  * DPDK callback to bring the link DOWN.
293  *
294  * @param dev
295  *   Pointer to Ethernet device structure.
296  *
297  * @return
298  *   0 on success, negative errno value otherwise and rte_errno is set.
299  */
300 int
301 mlx4_dev_set_link_down(struct rte_eth_dev *dev)
302 {
303         struct priv *priv = dev->data->dev_private;
304
305         return mlx4_dev_set_link(priv, 0);
306 }
307
308 /**
309  * DPDK callback to bring the link UP.
310  *
311  * @param dev
312  *   Pointer to Ethernet device structure.
313  *
314  * @return
315  *   0 on success, negative errno value otherwise and rte_errno is set.
316  */
317 int
318 mlx4_dev_set_link_up(struct rte_eth_dev *dev)
319 {
320         struct priv *priv = dev->data->dev_private;
321
322         return mlx4_dev_set_link(priv, 1);
323 }
324
325 /**
326  * Supported Rx mode toggles.
327  *
328  * Even and odd values respectively stand for off and on.
329  */
330 enum rxmode_toggle {
331         RXMODE_TOGGLE_PROMISC_OFF,
332         RXMODE_TOGGLE_PROMISC_ON,
333         RXMODE_TOGGLE_ALLMULTI_OFF,
334         RXMODE_TOGGLE_ALLMULTI_ON,
335 };
336
337 /**
338  * Helper function to toggle promiscuous and all multicast modes.
339  *
340  * @param dev
341  *   Pointer to Ethernet device structure.
342  * @param toggle
343  *   Toggle to set.
344  */
345 static void
346 mlx4_rxmode_toggle(struct rte_eth_dev *dev, enum rxmode_toggle toggle)
347 {
348         struct priv *priv = dev->data->dev_private;
349         const char *mode;
350         struct rte_flow_error error;
351
352         switch (toggle) {
353         case RXMODE_TOGGLE_PROMISC_OFF:
354         case RXMODE_TOGGLE_PROMISC_ON:
355                 mode = "promiscuous";
356                 dev->data->promiscuous = toggle & 1;
357                 break;
358         case RXMODE_TOGGLE_ALLMULTI_OFF:
359         case RXMODE_TOGGLE_ALLMULTI_ON:
360                 mode = "all multicast";
361                 dev->data->all_multicast = toggle & 1;
362                 break;
363         }
364         if (!mlx4_flow_sync(priv, &error))
365                 return;
366         ERROR("cannot toggle %s mode (code %d, \"%s\"),"
367               " flow error type %d, cause %p, message: %s",
368               mode, rte_errno, strerror(rte_errno), error.type, error.cause,
369               error.message ? error.message : "(unspecified)");
370 }
371
372 /**
373  * DPDK callback to enable promiscuous mode.
374  *
375  * @param dev
376  *   Pointer to Ethernet device structure.
377  */
378 void
379 mlx4_promiscuous_enable(struct rte_eth_dev *dev)
380 {
381         mlx4_rxmode_toggle(dev, RXMODE_TOGGLE_PROMISC_ON);
382 }
383
384 /**
385  * DPDK callback to disable promiscuous mode.
386  *
387  * @param dev
388  *   Pointer to Ethernet device structure.
389  */
390 void
391 mlx4_promiscuous_disable(struct rte_eth_dev *dev)
392 {
393         mlx4_rxmode_toggle(dev, RXMODE_TOGGLE_PROMISC_OFF);
394 }
395
396 /**
397  * DPDK callback to enable all multicast mode.
398  *
399  * @param dev
400  *   Pointer to Ethernet device structure.
401  */
402 void
403 mlx4_allmulticast_enable(struct rte_eth_dev *dev)
404 {
405         mlx4_rxmode_toggle(dev, RXMODE_TOGGLE_ALLMULTI_ON);
406 }
407
408 /**
409  * DPDK callback to disable all multicast mode.
410  *
411  * @param dev
412  *   Pointer to Ethernet device structure.
413  */
414 void
415 mlx4_allmulticast_disable(struct rte_eth_dev *dev)
416 {
417         mlx4_rxmode_toggle(dev, RXMODE_TOGGLE_ALLMULTI_OFF);
418 }
419
420 /**
421  * DPDK callback to remove a MAC address.
422  *
423  * @param dev
424  *   Pointer to Ethernet device structure.
425  * @param index
426  *   MAC address index.
427  */
428 void
429 mlx4_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
430 {
431         struct priv *priv = dev->data->dev_private;
432         struct rte_flow_error error;
433
434         if (index >= RTE_DIM(priv->mac)) {
435                 rte_errno = EINVAL;
436                 return;
437         }
438         memset(&priv->mac[index], 0, sizeof(priv->mac[index]));
439         if (!mlx4_flow_sync(priv, &error))
440                 return;
441         ERROR("failed to synchronize flow rules after removing MAC address"
442               " at index %d (code %d, \"%s\"),"
443               " flow error type %d, cause %p, message: %s",
444               index, rte_errno, strerror(rte_errno), error.type, error.cause,
445               error.message ? error.message : "(unspecified)");
446 }
447
448 /**
449  * DPDK callback to add a MAC address.
450  *
451  * @param dev
452  *   Pointer to Ethernet device structure.
453  * @param mac_addr
454  *   MAC address to register.
455  * @param index
456  *   MAC address index.
457  * @param vmdq
458  *   VMDq pool index to associate address with (ignored).
459  *
460  * @return
461  *   0 on success, negative errno value otherwise and rte_errno is set.
462  */
463 int
464 mlx4_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
465                   uint32_t index, uint32_t vmdq)
466 {
467         struct priv *priv = dev->data->dev_private;
468         struct rte_flow_error error;
469         int ret;
470
471         (void)vmdq;
472         if (index >= RTE_DIM(priv->mac)) {
473                 rte_errno = EINVAL;
474                 return -rte_errno;
475         }
476         memcpy(&priv->mac[index], mac_addr, sizeof(priv->mac[index]));
477         ret = mlx4_flow_sync(priv, &error);
478         if (!ret)
479                 return 0;
480         ERROR("failed to synchronize flow rules after adding MAC address"
481               " at index %d (code %d, \"%s\"),"
482               " flow error type %d, cause %p, message: %s",
483               index, rte_errno, strerror(rte_errno), error.type, error.cause,
484               error.message ? error.message : "(unspecified)");
485         return ret;
486 }
487
488 /**
489  * DPDK callback to configure a VLAN filter.
490  *
491  * @param dev
492  *   Pointer to Ethernet device structure.
493  * @param vlan_id
494  *   VLAN ID to filter.
495  * @param on
496  *   Toggle filter.
497  *
498  * @return
499  *   0 on success, negative errno value otherwise and rte_errno is set.
500  */
501 int
502 mlx4_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
503 {
504         struct priv *priv = dev->data->dev_private;
505         struct rte_flow_error error;
506         unsigned int vidx = vlan_id / 64;
507         unsigned int vbit = vlan_id % 64;
508         uint64_t *v;
509         int ret;
510
511         if (vidx >= RTE_DIM(dev->data->vlan_filter_conf.ids)) {
512                 rte_errno = EINVAL;
513                 return -rte_errno;
514         }
515         v = &dev->data->vlan_filter_conf.ids[vidx];
516         *v &= ~(UINT64_C(1) << vbit);
517         *v |= (uint64_t)!!on << vbit;
518         ret = mlx4_flow_sync(priv, &error);
519         if (!ret)
520                 return 0;
521         ERROR("failed to synchronize flow rules after %s VLAN filter on ID %u"
522               " (code %d, \"%s\"), "
523               " flow error type %d, cause %p, message: %s",
524               on ? "enabling" : "disabling", vlan_id,
525               rte_errno, strerror(rte_errno), error.type, error.cause,
526               error.message ? error.message : "(unspecified)");
527         return ret;
528 }
529
530 /**
531  * DPDK callback to set the primary MAC address.
532  *
533  * @param dev
534  *   Pointer to Ethernet device structure.
535  * @param mac_addr
536  *   MAC address to register.
537  *
538  * @return
539  *   0 on success, negative errno value otherwise and rte_errno is set.
540  */
541 int
542 mlx4_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
543 {
544         return mlx4_mac_addr_add(dev, mac_addr, 0, 0);
545 }
546
547 /**
548  * DPDK callback to get information about the device.
549  *
550  * @param dev
551  *   Pointer to Ethernet device structure.
552  * @param[out] info
553  *   Info structure output buffer.
554  */
555 void
556 mlx4_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
557 {
558         struct priv *priv = dev->data->dev_private;
559         unsigned int max;
560         char ifname[IF_NAMESIZE];
561
562         /* FIXME: we should ask the device for these values. */
563         info->min_rx_bufsize = 32;
564         info->max_rx_pktlen = 65536;
565         /*
566          * Since we need one CQ per QP, the limit is the minimum number
567          * between the two values.
568          */
569         max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ?
570                priv->device_attr.max_qp : priv->device_attr.max_cq);
571         /* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
572         if (max >= 65535)
573                 max = 65535;
574         info->max_rx_queues = max;
575         info->max_tx_queues = max;
576         info->max_mac_addrs = RTE_DIM(priv->mac);
577         info->tx_offload_capa = mlx4_get_tx_port_offloads(priv);
578         info->rx_queue_offload_capa = mlx4_get_rx_queue_offloads(priv);
579         info->rx_offload_capa = (mlx4_get_rx_port_offloads(priv) |
580                                  info->rx_queue_offload_capa);
581         if (mlx4_get_ifname(priv, &ifname) == 0)
582                 info->if_index = if_nametoindex(ifname);
583         info->hash_key_size = MLX4_RSS_HASH_KEY_SIZE;
584         info->speed_capa =
585                         ETH_LINK_SPEED_1G |
586                         ETH_LINK_SPEED_10G |
587                         ETH_LINK_SPEED_20G |
588                         ETH_LINK_SPEED_40G |
589                         ETH_LINK_SPEED_56G;
590         info->flow_type_rss_offloads = mlx4_conv_rss_types(priv, 0, 1);
591 }
592
593 /**
594  * DPDK callback to get device statistics.
595  *
596  * @param dev
597  *   Pointer to Ethernet device structure.
598  * @param[out] stats
599  *   Stats structure output buffer.
600  */
601 int
602 mlx4_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
603 {
604         struct rte_eth_stats tmp;
605         unsigned int i;
606         unsigned int idx;
607
608         memset(&tmp, 0, sizeof(tmp));
609         /* Add software counters. */
610         for (i = 0; i != dev->data->nb_rx_queues; ++i) {
611                 struct rxq *rxq = dev->data->rx_queues[i];
612
613                 if (rxq == NULL)
614                         continue;
615                 idx = rxq->stats.idx;
616                 if (idx < RTE_ETHDEV_QUEUE_STAT_CNTRS) {
617                         tmp.q_ipackets[idx] += rxq->stats.ipackets;
618                         tmp.q_ibytes[idx] += rxq->stats.ibytes;
619                         tmp.q_errors[idx] += (rxq->stats.idropped +
620                                               rxq->stats.rx_nombuf);
621                 }
622                 tmp.ipackets += rxq->stats.ipackets;
623                 tmp.ibytes += rxq->stats.ibytes;
624                 tmp.ierrors += rxq->stats.idropped;
625                 tmp.rx_nombuf += rxq->stats.rx_nombuf;
626         }
627         for (i = 0; i != dev->data->nb_tx_queues; ++i) {
628                 struct txq *txq = dev->data->tx_queues[i];
629
630                 if (txq == NULL)
631                         continue;
632                 idx = txq->stats.idx;
633                 if (idx < RTE_ETHDEV_QUEUE_STAT_CNTRS) {
634                         tmp.q_opackets[idx] += txq->stats.opackets;
635                         tmp.q_obytes[idx] += txq->stats.obytes;
636                         tmp.q_errors[idx] += txq->stats.odropped;
637                 }
638                 tmp.opackets += txq->stats.opackets;
639                 tmp.obytes += txq->stats.obytes;
640                 tmp.oerrors += txq->stats.odropped;
641         }
642         *stats = tmp;
643         return 0;
644 }
645
646 /**
647  * DPDK callback to clear device statistics.
648  *
649  * @param dev
650  *   Pointer to Ethernet device structure.
651  */
652 void
653 mlx4_stats_reset(struct rte_eth_dev *dev)
654 {
655         unsigned int i;
656
657         for (i = 0; i != dev->data->nb_rx_queues; ++i) {
658                 struct rxq *rxq = dev->data->rx_queues[i];
659
660                 if (rxq)
661                         rxq->stats = (struct mlx4_rxq_stats){
662                                 .idx = rxq->stats.idx,
663                         };
664         }
665         for (i = 0; i != dev->data->nb_tx_queues; ++i) {
666                 struct txq *txq = dev->data->tx_queues[i];
667
668                 if (txq)
669                         txq->stats = (struct mlx4_txq_stats){
670                                 .idx = txq->stats.idx,
671                         };
672         }
673 }
674
675 /**
676  * DPDK callback to retrieve physical link information.
677  *
678  * @param dev
679  *   Pointer to Ethernet device structure.
680  * @param wait_to_complete
681  *   Wait for request completion (ignored).
682  *
683  * @return
684  *   0 on success, negative errno value otherwise and rte_errno is set.
685  */
686 int
687 mlx4_link_update(struct rte_eth_dev *dev, int wait_to_complete)
688 {
689         const struct priv *priv = dev->data->dev_private;
690         struct ethtool_cmd edata = {
691                 .cmd = ETHTOOL_GSET,
692         };
693         struct ifreq ifr;
694         struct rte_eth_link dev_link;
695         int link_speed = 0;
696
697         if (priv == NULL) {
698                 rte_errno = EINVAL;
699                 return -rte_errno;
700         }
701         (void)wait_to_complete;
702         if (mlx4_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
703                 WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(rte_errno));
704                 return -rte_errno;
705         }
706         memset(&dev_link, 0, sizeof(dev_link));
707         dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
708                                 (ifr.ifr_flags & IFF_RUNNING));
709         ifr.ifr_data = (void *)&edata;
710         if (mlx4_ifreq(priv, SIOCETHTOOL, &ifr)) {
711                 WARN("ioctl(SIOCETHTOOL, ETHTOOL_GSET) failed: %s",
712                      strerror(rte_errno));
713                 return -rte_errno;
714         }
715         link_speed = ethtool_cmd_speed(&edata);
716         if (link_speed == -1)
717                 dev_link.link_speed = ETH_SPEED_NUM_NONE;
718         else
719                 dev_link.link_speed = link_speed;
720         dev_link.link_duplex = ((edata.duplex == DUPLEX_HALF) ?
721                                 ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
722         dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
723                                   ETH_LINK_SPEED_FIXED);
724         dev->data->dev_link = dev_link;
725         return 0;
726 }
727
728 /**
729  * DPDK callback to get flow control status.
730  *
731  * @param dev
732  *   Pointer to Ethernet device structure.
733  * @param[out] fc_conf
734  *   Flow control output buffer.
735  *
736  * @return
737  *   0 on success, negative errno value otherwise and rte_errno is set.
738  */
739 int
740 mlx4_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
741 {
742         struct priv *priv = dev->data->dev_private;
743         struct ifreq ifr;
744         struct ethtool_pauseparam ethpause = {
745                 .cmd = ETHTOOL_GPAUSEPARAM,
746         };
747         int ret;
748
749         ifr.ifr_data = (void *)&ethpause;
750         if (mlx4_ifreq(priv, SIOCETHTOOL, &ifr)) {
751                 ret = rte_errno;
752                 WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
753                      " failed: %s",
754                      strerror(rte_errno));
755                 goto out;
756         }
757         fc_conf->autoneg = ethpause.autoneg;
758         if (ethpause.rx_pause && ethpause.tx_pause)
759                 fc_conf->mode = RTE_FC_FULL;
760         else if (ethpause.rx_pause)
761                 fc_conf->mode = RTE_FC_RX_PAUSE;
762         else if (ethpause.tx_pause)
763                 fc_conf->mode = RTE_FC_TX_PAUSE;
764         else
765                 fc_conf->mode = RTE_FC_NONE;
766         ret = 0;
767 out:
768         assert(ret >= 0);
769         return -ret;
770 }
771
772 /**
773  * DPDK callback to modify flow control parameters.
774  *
775  * @param dev
776  *   Pointer to Ethernet device structure.
777  * @param[in] fc_conf
778  *   Flow control parameters.
779  *
780  * @return
781  *   0 on success, negative errno value otherwise and rte_errno is set.
782  */
783 int
784 mlx4_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
785 {
786         struct priv *priv = dev->data->dev_private;
787         struct ifreq ifr;
788         struct ethtool_pauseparam ethpause = {
789                 .cmd = ETHTOOL_SPAUSEPARAM,
790         };
791         int ret;
792
793         ifr.ifr_data = (void *)&ethpause;
794         ethpause.autoneg = fc_conf->autoneg;
795         if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
796             (fc_conf->mode & RTE_FC_RX_PAUSE))
797                 ethpause.rx_pause = 1;
798         else
799                 ethpause.rx_pause = 0;
800         if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
801             (fc_conf->mode & RTE_FC_TX_PAUSE))
802                 ethpause.tx_pause = 1;
803         else
804                 ethpause.tx_pause = 0;
805         if (mlx4_ifreq(priv, SIOCETHTOOL, &ifr)) {
806                 ret = rte_errno;
807                 WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
808                      " failed: %s",
809                      strerror(rte_errno));
810                 goto out;
811         }
812         ret = 0;
813 out:
814         assert(ret >= 0);
815         return -ret;
816 }
817
818 /**
819  * DPDK callback to retrieve the received packet types that are recognized
820  * by the device.
821  *
822  * @param dev
823  *   Pointer to Ethernet device structure.
824  *
825  * @return
826  *   Pointer to an array of recognized packet types if in Rx burst mode,
827  *   NULL otherwise.
828  */
829 const uint32_t *
830 mlx4_dev_supported_ptypes_get(struct rte_eth_dev *dev)
831 {
832         static const uint32_t ptypes[] = {
833                 /* refers to rxq_cq_to_pkt_type() */
834                 RTE_PTYPE_L2_ETHER,
835                 RTE_PTYPE_L3_IPV4_EXT_UNKNOWN,
836                 RTE_PTYPE_L3_IPV6_EXT_UNKNOWN,
837                 RTE_PTYPE_L4_FRAG,
838                 RTE_PTYPE_L4_TCP,
839                 RTE_PTYPE_L4_UDP,
840                 RTE_PTYPE_UNKNOWN
841         };
842         static const uint32_t ptypes_l2tun[] = {
843                 /* refers to rxq_cq_to_pkt_type() */
844                 RTE_PTYPE_L2_ETHER,
845                 RTE_PTYPE_L3_IPV4_EXT_UNKNOWN,
846                 RTE_PTYPE_L3_IPV6_EXT_UNKNOWN,
847                 RTE_PTYPE_L4_FRAG,
848                 RTE_PTYPE_L4_TCP,
849                 RTE_PTYPE_L4_UDP,
850                 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN,
851                 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN,
852                 RTE_PTYPE_UNKNOWN
853         };
854         struct priv *priv = dev->data->dev_private;
855
856         if (dev->rx_pkt_burst == mlx4_rx_burst) {
857                 if (priv->hw_csum_l2tun)
858                         return ptypes_l2tun;
859                 else
860                         return ptypes;
861         }
862         return NULL;
863 }
864
865 /**
866  * Check if mlx4 device was removed.
867  *
868  * @param dev
869  *   Pointer to Ethernet device structure.
870  *
871  * @return
872  *   1 when device is removed, otherwise 0.
873  */
874 int
875 mlx4_is_removed(struct rte_eth_dev *dev)
876 {
877         struct ibv_device_attr device_attr;
878         struct priv *priv = dev->data->dev_private;
879
880         if (mlx4_glue->query_device(priv->ctx, &device_attr) == EIO)
881                 return 1;
882         return 0;
883 }