New upstream version 18.08
[deb_dpdk.git] / drivers / net / virtio / virtio_pci.h
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright(c) 2010-2014 Intel Corporation
3  */
4
5 #ifndef _VIRTIO_PCI_H_
6 #define _VIRTIO_PCI_H_
7
8 #include <stdint.h>
9 #include <stdbool.h>
10
11 #include <rte_pci.h>
12 #include <rte_bus_pci.h>
13 #include <rte_ethdev_driver.h>
14
15 struct virtqueue;
16 struct virtnet_ctl;
17
18 /* VirtIO PCI vendor/device ID. */
19 #define VIRTIO_PCI_VENDORID     0x1AF4
20 #define VIRTIO_PCI_LEGACY_DEVICEID_NET 0x1000
21 #define VIRTIO_PCI_MODERN_DEVICEID_NET 0x1041
22
23 /* VirtIO ABI version, this must match exactly. */
24 #define VIRTIO_PCI_ABI_VERSION 0
25
26 /*
27  * VirtIO Header, located in BAR 0.
28  */
29 #define VIRTIO_PCI_HOST_FEATURES  0  /* host's supported features (32bit, RO)*/
30 #define VIRTIO_PCI_GUEST_FEATURES 4  /* guest's supported features (32, RW) */
31 #define VIRTIO_PCI_QUEUE_PFN      8  /* physical address of VQ (32, RW) */
32 #define VIRTIO_PCI_QUEUE_NUM      12 /* number of ring entries (16, RO) */
33 #define VIRTIO_PCI_QUEUE_SEL      14 /* current VQ selection (16, RW) */
34 #define VIRTIO_PCI_QUEUE_NOTIFY   16 /* notify host regarding VQ (16, RW) */
35 #define VIRTIO_PCI_STATUS         18 /* device status register (8, RW) */
36 #define VIRTIO_PCI_ISR            19 /* interrupt status register, reading
37                                       * also clears the register (8, RO) */
38 /* Only if MSIX is enabled: */
39 #define VIRTIO_MSI_CONFIG_VECTOR  20 /* configuration change vector (16, RW) */
40 #define VIRTIO_MSI_QUEUE_VECTOR   22 /* vector for selected VQ notifications
41                                       (16, RW) */
42
43 /* The bit of the ISR which indicates a device has an interrupt. */
44 #define VIRTIO_PCI_ISR_INTR   0x1
45 /* The bit of the ISR which indicates a device configuration change. */
46 #define VIRTIO_PCI_ISR_CONFIG 0x2
47 /* Vector value used to disable MSI for queue. */
48 #define VIRTIO_MSI_NO_VECTOR 0xFFFF
49
50 /* VirtIO device IDs. */
51 #define VIRTIO_ID_NETWORK  0x01
52 #define VIRTIO_ID_BLOCK    0x02
53 #define VIRTIO_ID_CONSOLE  0x03
54 #define VIRTIO_ID_ENTROPY  0x04
55 #define VIRTIO_ID_BALLOON  0x05
56 #define VIRTIO_ID_IOMEMORY 0x06
57 #define VIRTIO_ID_9P       0x09
58
59 /* Status byte for guest to report progress. */
60 #define VIRTIO_CONFIG_STATUS_RESET     0x00
61 #define VIRTIO_CONFIG_STATUS_ACK       0x01
62 #define VIRTIO_CONFIG_STATUS_DRIVER    0x02
63 #define VIRTIO_CONFIG_STATUS_DRIVER_OK 0x04
64 #define VIRTIO_CONFIG_STATUS_FEATURES_OK 0x08
65 #define VIRTIO_CONFIG_STATUS_FAILED    0x80
66
67 /*
68  * Each virtqueue indirect descriptor list must be physically contiguous.
69  * To allow us to malloc(9) each list individually, limit the number
70  * supported to what will fit in one page. With 4KB pages, this is a limit
71  * of 256 descriptors. If there is ever a need for more, we can switch to
72  * contigmalloc(9) for the larger allocations, similar to what
73  * bus_dmamem_alloc(9) does.
74  *
75  * Note the sizeof(struct vring_desc) is 16 bytes.
76  */
77 #define VIRTIO_MAX_INDIRECT ((int) (PAGE_SIZE / 16))
78
79 /* The feature bitmap for virtio net */
80 #define VIRTIO_NET_F_CSUM       0       /* Host handles pkts w/ partial csum */
81 #define VIRTIO_NET_F_GUEST_CSUM 1       /* Guest handles pkts w/ partial csum */
82 #define VIRTIO_NET_F_MTU        3       /* Initial MTU advice. */
83 #define VIRTIO_NET_F_MAC        5       /* Host has given MAC address. */
84 #define VIRTIO_NET_F_GUEST_TSO4 7       /* Guest can handle TSOv4 in. */
85 #define VIRTIO_NET_F_GUEST_TSO6 8       /* Guest can handle TSOv6 in. */
86 #define VIRTIO_NET_F_GUEST_ECN  9       /* Guest can handle TSO[6] w/ ECN in. */
87 #define VIRTIO_NET_F_GUEST_UFO  10      /* Guest can handle UFO in. */
88 #define VIRTIO_NET_F_HOST_TSO4  11      /* Host can handle TSOv4 in. */
89 #define VIRTIO_NET_F_HOST_TSO6  12      /* Host can handle TSOv6 in. */
90 #define VIRTIO_NET_F_HOST_ECN   13      /* Host can handle TSO[6] w/ ECN in. */
91 #define VIRTIO_NET_F_HOST_UFO   14      /* Host can handle UFO in. */
92 #define VIRTIO_NET_F_MRG_RXBUF  15      /* Host can merge receive buffers. */
93 #define VIRTIO_NET_F_STATUS     16      /* virtio_net_config.status available */
94 #define VIRTIO_NET_F_CTRL_VQ    17      /* Control channel available */
95 #define VIRTIO_NET_F_CTRL_RX    18      /* Control channel RX mode support */
96 #define VIRTIO_NET_F_CTRL_VLAN  19      /* Control channel VLAN filtering */
97 #define VIRTIO_NET_F_CTRL_RX_EXTRA 20   /* Extra RX mode control support */
98 #define VIRTIO_NET_F_GUEST_ANNOUNCE 21  /* Guest can announce device on the
99                                          * network */
100 #define VIRTIO_NET_F_MQ         22      /* Device supports Receive Flow
101                                          * Steering */
102 #define VIRTIO_NET_F_CTRL_MAC_ADDR 23   /* Set MAC address */
103
104 /* Do we get callbacks when the ring is completely used, even if we've
105  * suppressed them? */
106 #define VIRTIO_F_NOTIFY_ON_EMPTY        24
107
108 /* Can the device handle any descriptor layout? */
109 #define VIRTIO_F_ANY_LAYOUT             27
110
111 /* We support indirect buffer descriptors */
112 #define VIRTIO_RING_F_INDIRECT_DESC     28
113
114 #define VIRTIO_F_VERSION_1              32
115 #define VIRTIO_F_IOMMU_PLATFORM 33
116
117 /*
118  * Some VirtIO feature bits (currently bits 28 through 31) are
119  * reserved for the transport being used (eg. virtio_ring), the
120  * rest are per-device feature bits.
121  */
122 #define VIRTIO_TRANSPORT_F_START 28
123 #define VIRTIO_TRANSPORT_F_END   34
124
125 /*
126  * Inorder feature indicates that all buffers are used by the device
127  * in the same order in which they have been made available.
128  */
129 #define VIRTIO_F_IN_ORDER 35
130
131 /* The Guest publishes the used index for which it expects an interrupt
132  * at the end of the avail ring. Host should ignore the avail->flags field. */
133 /* The Host publishes the avail index for which it expects a kick
134  * at the end of the used ring. Guest should ignore the used->flags field. */
135 #define VIRTIO_RING_F_EVENT_IDX         29
136
137 #define VIRTIO_NET_S_LINK_UP    1       /* Link is up */
138 #define VIRTIO_NET_S_ANNOUNCE   2       /* Announcement is needed */
139
140 /*
141  * Maximum number of virtqueues per device.
142  */
143 #define VIRTIO_MAX_VIRTQUEUE_PAIRS 8
144 #define VIRTIO_MAX_VIRTQUEUES (VIRTIO_MAX_VIRTQUEUE_PAIRS * 2 + 1)
145
146 /* Common configuration */
147 #define VIRTIO_PCI_CAP_COMMON_CFG       1
148 /* Notifications */
149 #define VIRTIO_PCI_CAP_NOTIFY_CFG       2
150 /* ISR Status */
151 #define VIRTIO_PCI_CAP_ISR_CFG          3
152 /* Device specific configuration */
153 #define VIRTIO_PCI_CAP_DEVICE_CFG       4
154 /* PCI configuration access */
155 #define VIRTIO_PCI_CAP_PCI_CFG          5
156
157 /* This is the PCI capability header: */
158 struct virtio_pci_cap {
159         uint8_t cap_vndr;               /* Generic PCI field: PCI_CAP_ID_VNDR */
160         uint8_t cap_next;               /* Generic PCI field: next ptr. */
161         uint8_t cap_len;                /* Generic PCI field: capability length */
162         uint8_t cfg_type;               /* Identifies the structure. */
163         uint8_t bar;                    /* Where to find it. */
164         uint8_t padding[3];             /* Pad to full dword. */
165         uint32_t offset;                /* Offset within bar. */
166         uint32_t length;                /* Length of the structure, in bytes. */
167 };
168
169 struct virtio_pci_notify_cap {
170         struct virtio_pci_cap cap;
171         uint32_t notify_off_multiplier; /* Multiplier for queue_notify_off. */
172 };
173
174 /* Fields in VIRTIO_PCI_CAP_COMMON_CFG: */
175 struct virtio_pci_common_cfg {
176         /* About the whole device. */
177         uint32_t device_feature_select; /* read-write */
178         uint32_t device_feature;        /* read-only */
179         uint32_t guest_feature_select;  /* read-write */
180         uint32_t guest_feature;         /* read-write */
181         uint16_t msix_config;           /* read-write */
182         uint16_t num_queues;            /* read-only */
183         uint8_t device_status;          /* read-write */
184         uint8_t config_generation;      /* read-only */
185
186         /* About a specific virtqueue. */
187         uint16_t queue_select;          /* read-write */
188         uint16_t queue_size;            /* read-write, power of 2. */
189         uint16_t queue_msix_vector;     /* read-write */
190         uint16_t queue_enable;          /* read-write */
191         uint16_t queue_notify_off;      /* read-only */
192         uint32_t queue_desc_lo;         /* read-write */
193         uint32_t queue_desc_hi;         /* read-write */
194         uint32_t queue_avail_lo;        /* read-write */
195         uint32_t queue_avail_hi;        /* read-write */
196         uint32_t queue_used_lo;         /* read-write */
197         uint32_t queue_used_hi;         /* read-write */
198 };
199
200 struct virtio_hw;
201
202 struct virtio_pci_ops {
203         void (*read_dev_cfg)(struct virtio_hw *hw, size_t offset,
204                              void *dst, int len);
205         void (*write_dev_cfg)(struct virtio_hw *hw, size_t offset,
206                               const void *src, int len);
207         void (*reset)(struct virtio_hw *hw);
208
209         uint8_t (*get_status)(struct virtio_hw *hw);
210         void    (*set_status)(struct virtio_hw *hw, uint8_t status);
211
212         uint64_t (*get_features)(struct virtio_hw *hw);
213         void     (*set_features)(struct virtio_hw *hw, uint64_t features);
214
215         uint8_t (*get_isr)(struct virtio_hw *hw);
216
217         uint16_t (*set_config_irq)(struct virtio_hw *hw, uint16_t vec);
218
219         uint16_t (*set_queue_irq)(struct virtio_hw *hw, struct virtqueue *vq,
220                         uint16_t vec);
221
222         uint16_t (*get_queue_num)(struct virtio_hw *hw, uint16_t queue_id);
223         int (*setup_queue)(struct virtio_hw *hw, struct virtqueue *vq);
224         void (*del_queue)(struct virtio_hw *hw, struct virtqueue *vq);
225         void (*notify_queue)(struct virtio_hw *hw, struct virtqueue *vq);
226 };
227
228 struct virtio_net_config;
229
230 struct virtio_hw {
231         struct virtnet_ctl *cvq;
232         uint64_t    req_guest_features;
233         uint64_t    guest_features;
234         uint32_t    max_queue_pairs;
235         uint16_t    started;
236         uint16_t        max_mtu;
237         uint16_t    vtnet_hdr_size;
238         uint8_t     vlan_strip;
239         uint8_t     use_msix;
240         uint8_t     modern;
241         uint8_t     use_simple_rx;
242         uint8_t     use_inorder_rx;
243         uint8_t     use_inorder_tx;
244         bool        has_tx_offload;
245         bool        has_rx_offload;
246         uint16_t    port_id;
247         uint8_t     mac_addr[ETHER_ADDR_LEN];
248         uint32_t    notify_off_multiplier;
249         uint8_t     *isr;
250         uint16_t    *notify_base;
251         struct virtio_pci_common_cfg *common_cfg;
252         struct virtio_net_config *dev_cfg;
253         void        *virtio_user_dev;
254         /*
255          * App management thread and virtio interrupt handler thread
256          * both can change device state, this lock is meant to avoid
257          * such a contention.
258          */
259         rte_spinlock_t state_lock;
260         struct rte_mbuf **inject_pkts;
261
262         struct virtqueue **vqs;
263 };
264
265
266 /*
267  * While virtio_hw is stored in shared memory, this structure stores
268  * some infos that may vary in the multiple process model locally.
269  * For example, the vtpci_ops pointer.
270  */
271 struct virtio_hw_internal {
272         const struct virtio_pci_ops *vtpci_ops;
273         struct rte_pci_ioport io;
274 };
275
276 #define VTPCI_OPS(hw)   (virtio_hw_internal[(hw)->port_id].vtpci_ops)
277 #define VTPCI_IO(hw)    (&virtio_hw_internal[(hw)->port_id].io)
278
279 extern struct virtio_hw_internal virtio_hw_internal[RTE_MAX_ETHPORTS];
280
281
282 /*
283  * This structure is just a reference to read
284  * net device specific config space; it just a chodu structure
285  *
286  */
287 struct virtio_net_config {
288         /* The config defining mac address (if VIRTIO_NET_F_MAC) */
289         uint8_t    mac[ETHER_ADDR_LEN];
290         /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
291         uint16_t   status;
292         uint16_t   max_virtqueue_pairs;
293         uint16_t   mtu;
294 } __attribute__((packed));
295
296 /*
297  * How many bits to shift physical queue address written to QUEUE_PFN.
298  * 12 is historical, and due to x86 page size.
299  */
300 #define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12
301
302 /* The alignment to use between consumer and producer parts of vring. */
303 #define VIRTIO_PCI_VRING_ALIGN 4096
304
305 enum virtio_msix_status {
306         VIRTIO_MSIX_NONE = 0,
307         VIRTIO_MSIX_DISABLED = 1,
308         VIRTIO_MSIX_ENABLED = 2
309 };
310
311 static inline int
312 vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
313 {
314         return (hw->guest_features & (1ULL << bit)) != 0;
315 }
316
317 /*
318  * Function declaration from virtio_pci.c
319  */
320 int vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw);
321 void vtpci_reset(struct virtio_hw *);
322
323 void vtpci_reinit_complete(struct virtio_hw *);
324
325 uint8_t vtpci_get_status(struct virtio_hw *);
326 void vtpci_set_status(struct virtio_hw *, uint8_t);
327
328 uint64_t vtpci_negotiate_features(struct virtio_hw *, uint64_t);
329
330 void vtpci_write_dev_config(struct virtio_hw *, size_t, const void *, int);
331
332 void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
333
334 uint8_t vtpci_isr(struct virtio_hw *);
335
336 enum virtio_msix_status vtpci_msix_detect(struct rte_pci_device *dev);
337
338 extern const struct virtio_pci_ops legacy_ops;
339 extern const struct virtio_pci_ops modern_ops;
340 extern const struct virtio_pci_ops virtio_user_ops;
341
342 #endif /* _VIRTIO_PCI_H_ */