examples/ip_pipeline/config/pipeline-to-core-mapping.py

   1 #!/usr/bin/env python
   2
   3 #   BSD LICENSE
   4 #
   5 #   Copyright(c) 2016 Intel Corporation. All rights reserved.
   6 #   All rights reserved.
   7 #
   8 #   Redistribution and use in source and binary forms, with or without
   9 #   modification, are permitted provided that the following conditions
  10 #   are met:
  11 #
  12 #     * Redistributions of source code must retain the above copyright
  13 #       notice, this list of conditions and the following disclaimer.
  14 #     * Redistributions in binary form must reproduce the above copyright
  15 #       notice, this list of conditions and the following disclaimer in
  16 #       the documentation and/or other materials provided with the
  17 #       distribution.
  18 #     * Neither the name of Intel Corporation nor the names of its
  19 #       contributors may be used to endorse or promote products derived
  20 #       from this software without specific prior written permission.
  21 #
  22 #   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  23 #   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  24 #   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  25 #   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  26 #   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  27 #   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  28 #   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  29 #   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  30 #   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31 #   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  32 #   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33
  34 #
  35 # This script maps the set of pipelines identified (MASTER pipelines are
  36 # ignored) from the input configuration file to the set of cores
  37 # provided as input argument and creates configuration files for each of
  38 # the mapping combinations.
  39 #
  40
  41 from __future__ import print_function
  42 from collections import namedtuple
  43 import argparse
  44 import array
  45 import errno
  46 import itertools
  47 import os
  48 import re
  49 import sys
  50
  51 # default values
  52 enable_stage0_traceout = 1
  53 enable_stage1_traceout = 1
  54 enable_stage2_traceout = 1
  55
  56 enable_stage1_fileout = 1
  57 enable_stage2_fileout = 1
  58
  59 Constants = namedtuple('Constants', ['MAX_CORES', 'MAX_PIPELINES'])
  60 constants = Constants(16, 64)
  61
  62 # pattern for physical core
  63 pattern_phycore = '^(s|S)\d(c|C)[1-9][0-9]*$'
  64 reg_phycore = re.compile(pattern_phycore)
  65
  66
  67 def popcount(mask):
  68     return bin(mask).count("1")
  69
  70
  71 def len2mask(length):
  72     if (length == 0):
  73         return 0
  74
  75     if (length > 64):
  76         sys.exit('error: len2mask - length %i > 64. exiting' % length)
  77
  78     return int('1' * length, 2)
  79
  80
  81 def bitstring_write(n, n_bits):
  82     tmpstr = ""
  83     if (n_bits > 64):
  84         return
  85
  86     i = n_bits - 1
  87     while (i >= 0):
  88         cond = (n & (1 << i))
  89         if (cond):
  90             print('1', end='')
  91             tmpstr += '1'
  92         else:
  93             print('0', end='')
  94             tmpstr += '0'
  95         i -= 1
  96     return tmpstr
  97
  98
  99 class Cores0:
 100
 101     def __init__(self):
 102         self.n_pipelines = 0
 103
 104
 105 class Cores1:
 106
 107     def __init__(self):
 108         self.pipelines = 0
 109         self.n_pipelines = 0
 110
 111
 112 class Cores2:
 113
 114     def __init__(self):
 115         self.pipelines = 0
 116         self.n_pipelines = 0
 117         self.counter = 0
 118         self.counter_max = 0
 119         self.bitpos = array.array(
 120             "L", itertools.repeat(0, constants.MAX_PIPELINES))
 121
 122
 123 class Context0:
 124
 125     def __init__(self):
 126         self.cores = [Cores0() for i in range(0, constants.MAX_CORES)]
 127         self.n_cores = 0
 128         self.n_pipelines = 0
 129         self.n_pipelines0 = 0
 130         self.pos = 0
 131         self.file_comment = ""
 132         self.ctx1 = None
 133         self.ctx2 = None
 134
 135     def stage0_print(self):
 136         print('printing Context0 obj')
 137         print('c0.cores(n_pipelines) = [ ', end='')
 138         for cores_count in range(0, constants.MAX_CORES):
 139             print(self.cores[cores_count].n_pipelines, end=' ')
 140         print(']')
 141         print('c0.n_cores = %d' % self.n_cores)
 142         print('c0.n_pipelines = %d' % self.n_pipelines)
 143         print('c0.n_pipelines0 = %d' % self.n_pipelines0)
 144         print('c0.pos = %d' % self.pos)
 145         print('c0.file_comment = %s' % self.file_comment)
 146         if (self.ctx1 is not None):
 147             print('c0.ctx1 = ', end='')
 148             print(repr(self.ctx1))
 149         else:
 150             print('c0.ctx1 = None')
 151
 152         if (self.ctx2 is not None):
 153             print('c0.ctx2 = ', end='')
 154             print(repr(self.ctx2))
 155         else:
 156             print('c0.ctx2 = None')
 157
 158     def stage0_init(self, num_cores, num_pipelines, ctx1, ctx2):
 159         self.n_cores = num_cores
 160         self.n_pipelines = num_pipelines
 161         self.ctx1 = ctx1
 162         self.ctx2 = ctx2
 163
 164     def stage0_process(self):
 165         # stage0 init
 166         self.cores[0].n_pipelines = self.n_pipelines
 167         self.n_pipelines0 = 0
 168         self.pos = 1
 169
 170         while True:
 171             # go forward
 172             while True:
 173                 if ((self.pos < self.n_cores) and (self.n_pipelines0 > 0)):
 174                     self.cores[self.pos].n_pipelines = min(
 175                         self.cores[self.pos - 1].n_pipelines,
 176                         self.n_pipelines0)
 177                     self.n_pipelines0 -= self.cores[self.pos].n_pipelines
 178                     self.pos += 1
 179                 else:
 180                     break
 181
 182             # check solution
 183             if (self.n_pipelines0 == 0):
 184                 self.stage0_log()
 185                 self.ctx1.stage1_init(self, self.ctx2)  # self is object c0
 186                 self.ctx1.stage1_process()
 187
 188             # go backward
 189             while True:
 190                 if (self.pos == 0):
 191                     return
 192
 193                 self.pos -= 1
 194                 if ((self.cores[self.pos].n_pipelines > 1) and
 195                         (self.pos != (self.n_cores - 1))):
 196                     break
 197
 198                 self.n_pipelines0 += self.cores[self.pos].n_pipelines
 199                 self.cores[self.pos].n_pipelines = 0
 200
 201             # rearm
 202             self.cores[self.pos].n_pipelines -= 1
 203             self.n_pipelines0 += 1
 204             self.pos += 1
 205
 206     def stage0_log(self):
 207         tmp_file_comment = ""
 208         if(enable_stage0_traceout != 1):
 209             return
 210
 211         print('STAGE0: ', end='')
 212         tmp_file_comment += 'STAGE0: '
 213         for cores_count in range(0, self.n_cores):
 214             print('C%d = %d\t'
 215                   % (cores_count,
 216                       self.cores[cores_count].n_pipelines), end='')
 217             tmp_file_comment += "C{} = {}\t".format(
 218                 cores_count, self.cores[cores_count].n_pipelines)
 219         # end for
 220         print('')
 221         self.ctx1.stage0_file_comment = tmp_file_comment
 222         self.ctx2.stage0_file_comment = tmp_file_comment
 223
 224
 225 class Context1:
 226     _fileTrace = None
 227
 228     def __init__(self):
 229         self.cores = [Cores1() for i in range(constants.MAX_CORES)]
 230         self.n_cores = 0
 231         self.n_pipelines = 0
 232         self.pos = 0
 233         self.stage0_file_comment = ""
 234         self.stage1_file_comment = ""
 235
 236         self.ctx2 = None
 237         self.arr_pipelines2cores = []
 238
 239     def stage1_reset(self):
 240         for i in range(constants.MAX_CORES):
 241             self.cores[i].pipelines = 0
 242             self.cores[i].n_pipelines = 0
 243
 244         self.n_cores = 0
 245         self.n_pipelines = 0
 246         self.pos = 0
 247         self.ctx2 = None
 248         # clear list
 249         del self.arr_pipelines2cores[:]
 250
 251     def stage1_print(self):
 252         print('printing Context1 obj')
 253         print('ctx1.cores(pipelines,n_pipelines) = [ ', end='')
 254         for cores_count in range(0, constants.MAX_CORES):
 255             print('(%d,%d)' % (self.cores[cores_count].pipelines,
 256                                self.cores[cores_count].n_pipelines), end=' ')
 257         print(']')
 258         print('ctx1.n_cores = %d' % self.n_cores)
 259         print('ctx1.n_pipelines = %d' % self.n_pipelines)
 260         print('ctx1.pos = %d' % self.pos)
 261         print('ctx1.stage0_file_comment = %s' % self.stage0_file_comment)
 262         print('ctx1.stage1_file_comment = %s' % self.stage1_file_comment)
 263         if (self.ctx2 is not None):
 264             print('ctx1.ctx2 = ', end='')
 265             print(self.ctx2)
 266         else:
 267             print('ctx1.ctx2 = None')
 268
 269     def stage1_init(self, c0, ctx2):
 270         self.stage1_reset()
 271         self.n_cores = 0
 272         while (c0.cores[self.n_cores].n_pipelines > 0):
 273             self.n_cores += 1
 274
 275         self.n_pipelines = c0.n_pipelines
 276         self.ctx2 = ctx2
 277
 278         self.arr_pipelines2cores = [0] * self.n_pipelines
 279
 280         i = 0
 281         while (i < self.n_cores):
 282             self.cores[i].n_pipelines = c0.cores[i].n_pipelines
 283             i += 1
 284
 285     def stage1_process(self):
 286         pipelines_max = len2mask(self.n_pipelines)
 287         while True:
 288             pos = 0
 289             overlap = 0
 290
 291             if (self.cores[self.pos].pipelines == pipelines_max):
 292                 if (self.pos == 0):
 293                     return
 294
 295                 self.cores[self.pos].pipelines = 0
 296                 self.pos -= 1
 297                 continue
 298
 299             self.cores[self.pos].pipelines += 1
 300             if (popcount(self.cores[self.pos].pipelines) !=
 301                     self.cores[self.pos].n_pipelines):
 302                 continue
 303
 304             overlap = 0
 305             pos = 0
 306             while (pos < self.pos):
 307                 if ((self.cores[self.pos].pipelines) &
 308                         (self.cores[pos].pipelines)):
 309                     overlap = 1
 310                     break
 311                 pos += 1
 312
 313             if (overlap):
 314                 continue
 315
 316             if ((self.pos > 0) and
 317                 ((self.cores[self.pos].n_pipelines) ==
 318                     (self.cores[self.pos - 1].n_pipelines)) and
 319                     ((self.cores[self.pos].pipelines) <
 320                         (self.cores[self.pos - 1].pipelines))):
 321                 continue
 322
 323             if (self.pos == self.n_cores - 1):
 324                 self.stage1_log()
 325                 self.ctx2.stage2_init(self)
 326                 self.ctx2.stage2_process()
 327
 328                 if (self.pos == 0):
 329                     return
 330
 331                 self.cores[self.pos].pipelines = 0
 332                 self.pos -= 1
 333                 continue
 334
 335             self.pos += 1
 336
 337     def stage1_log(self):
 338         tmp_file_comment = ""
 339         if(enable_stage1_traceout == 1):
 340             print('STAGE1: ', end='')
 341             tmp_file_comment += 'STAGE1: '
 342             i = 0
 343             while (i < self.n_cores):
 344                 print('C%d = [' % i, end='')
 345                 tmp_file_comment += "C{} = [".format(i)
 346
 347                 j = self.n_pipelines - 1
 348                 while (j >= 0):
 349                     cond = ((self.cores[i].pipelines) & (1 << j))
 350                     if (cond):
 351                         print('1', end='')
 352                         tmp_file_comment += '1'
 353                     else:
 354                         print('0', end='')
 355                         tmp_file_comment += '0'
 356                     j -= 1
 357
 358                 print(']\t', end='')
 359                 tmp_file_comment += ']\t'
 360                 i += 1
 361
 362             print('\n', end='')
 363             self.stage1_file_comment = tmp_file_comment
 364             self.ctx2.stage1_file_comment = tmp_file_comment
 365
 366         # check if file traceing is enabled
 367         if(enable_stage1_fileout != 1):
 368             return
 369
 370         # spit out the combination to file
 371         self.stage1_process_file()
 372
 373     def stage1_updateCoresInBuf(self, nPipeline, sCore):
 374         rePipeline = self._fileTrace.arr_pipelines[nPipeline]
 375         rePipeline = rePipeline.replace("[", "\[").replace("]", "\]")
 376         reCore = 'core\s*=\s*((\d*)|(((s|S)\d)?(c|C)[1-9][0-9]*)).*\n'
 377         sSubs = 'core = ' + sCore + '\n'
 378
 379         reg_pipeline = re.compile(rePipeline)
 380         search_match = reg_pipeline.search(self._fileTrace.in_buf)
 381
 382         if(search_match):
 383             pos = search_match.start()
 384             substr1 = self._fileTrace.in_buf[:pos]
 385             substr2 = self._fileTrace.in_buf[pos:]
 386             substr2 = re.sub(reCore, sSubs, substr2, 1)
 387             self._fileTrace.in_buf = substr1 + substr2
 388
 389     def stage1_process_file(self):
 390         outFileName = os.path.join(self._fileTrace.out_path,
 391                                    self._fileTrace.prefix_outfile)
 392         outFileName += "_{}CoReS".format(self.n_cores)
 393
 394         i = 0  # represents core number
 395         while (i < self.n_cores):
 396             j = self.n_pipelines - 1
 397             pipeline_idx = 0
 398             while(j >= 0):
 399                 cond = ((self.cores[i].pipelines) & (1 << j))
 400                 if (cond):
 401                     # update the pipelines array to match the core
 402                     # only in case of cond match
 403                     self.arr_pipelines2cores[
 404                         pipeline_idx] = fileTrace.in_physical_cores[i]
 405
 406                 j -= 1
 407                 pipeline_idx += 1
 408
 409             i += 1
 410
 411         # update the in_buf as per the arr_pipelines2cores
 412         for pipeline_idx in range(len(self.arr_pipelines2cores)):
 413             outFileName += "_{}".format(self.arr_pipelines2cores[pipeline_idx])
 414             self.stage1_updateCoresInBuf(
 415                 pipeline_idx, self.arr_pipelines2cores[pipeline_idx])
 416
 417         # by now the in_buf is all set to be written to file
 418         outFileName += self._fileTrace.suffix_outfile
 419         outputFile = open(outFileName, "w")
 420
 421         # write out the comments
 422         strTruncated = ("", "(Truncated)")[self._fileTrace.ncores_truncated]
 423         outputFile.write(
 424             "; =============== Pipeline-to-Core Mapping ================\n"
 425             "; Generated from file {}\n"
 426             "; Input pipelines = {}\n"
 427             "; Input cores = {}\n"
 428             "; N_PIPELINES = {} N_CORES = {} {} hyper_thread = {}\n"
 429             .format(
 430                 self._fileTrace.in_file_namepath,
 431                 fileTrace.arr_pipelines,
 432                 fileTrace.in_physical_cores,
 433                 self._fileTrace.n_pipelines,
 434                 self._fileTrace.n_cores,
 435                 strTruncated,
 436                 self._fileTrace.hyper_thread))
 437
 438         outputFile.write(
 439             "; {stg0cmt}\n"
 440             "; {stg1cmt}\n"
 441             "; ========================================================\n"
 442             "; \n"
 443             .format(
 444                 stg0cmt=self.stage0_file_comment,
 445                 stg1cmt=self.stage1_file_comment))
 446
 447         # write buffer contents
 448         outputFile.write(self._fileTrace.in_buf)
 449         outputFile.flush()
 450         outputFile.close()
 451
 452
 453 class Context2:
 454     _fileTrace = None
 455
 456     def __init__(self):
 457         self.cores = [Cores2() for i in range(constants.MAX_CORES)]
 458         self.n_cores = 0
 459         self.n_pipelines = 0
 460         self.pos = 0
 461         self.stage0_file_comment = ""
 462         self.stage1_file_comment = ""
 463         self.stage2_file_comment = ""
 464
 465         # each array entry is a pipeline mapped to core stored as string
 466         # pipeline ranging from 1 to n, however stored in zero based array
 467         self.arr2_pipelines2cores = []
 468
 469     def stage2_print(self):
 470         print('printing Context2 obj')
 471         print('ctx2.cores(pipelines, n_pipelines, counter, counter_max) =')
 472         for cores_count in range(0, constants.MAX_CORES):
 473             print('core[%d] = (%d,%d,%d,%d)' % (
 474                 cores_count,
 475                 self.cores[cores_count].pipelines,
 476                 self.cores[cores_count].n_pipelines,
 477                 self.cores[cores_count].counter,
 478                 self.cores[cores_count].counter_max))
 479
 480             print('ctx2.n_cores = %d' % self.n_cores, end='')
 481             print('ctx2.n_pipelines = %d' % self.n_pipelines, end='')
 482             print('ctx2.pos = %d' % self.pos)
 483             print('ctx2.stage0_file_comment = %s' %
 484                   self.self.stage0_file_comment)
 485             print('ctx2.stage1_file_comment = %s' %
 486                   self.self.stage1_file_comment)
 487             print('ctx2.stage2_file_comment = %s' %
 488                   self.self.stage2_file_comment)
 489
 490     def stage2_reset(self):
 491         for i in range(0, constants.MAX_CORES):
 492             self.cores[i].pipelines = 0
 493             self.cores[i].n_pipelines = 0
 494             self.cores[i].counter = 0
 495             self.cores[i].counter_max = 0
 496
 497             for idx in range(0, constants.MAX_PIPELINES):
 498                 self.cores[i].bitpos[idx] = 0
 499
 500         self.n_cores = 0
 501         self.n_pipelines = 0
 502         self.pos = 0
 503         # clear list
 504         del self.arr2_pipelines2cores[:]
 505
 506     def bitpos_load(self, coreidx):
 507         i = j = 0
 508         while (i < self.n_pipelines):
 509             if ((self.cores[coreidx].pipelines) &
 510                     (1 << i)):
 511                 self.cores[coreidx].bitpos[j] = i
 512                 j += 1
 513             i += 1
 514         self.cores[coreidx].n_pipelines = j
 515
 516     def bitpos_apply(self, in_buf, pos, n_pos):
 517         out = 0
 518         for i in range(0, n_pos):
 519             out |= (in_buf & (1 << i)) << (pos[i] - i)
 520
 521         return out
 522
 523     def stage2_init(self, ctx1):
 524         self.stage2_reset()
 525         self.n_cores = ctx1.n_cores
 526         self.n_pipelines = ctx1.n_pipelines
 527
 528         self.arr2_pipelines2cores = [''] * self.n_pipelines
 529
 530         core_idx = 0
 531         while (core_idx < self.n_cores):
 532             self.cores[core_idx].pipelines = ctx1.cores[core_idx].pipelines
 533
 534             self.bitpos_load(core_idx)
 535             core_idx += 1
 536
 537     def stage2_log(self):
 538         tmp_file_comment = ""
 539         if(enable_stage2_traceout == 1):
 540             print('STAGE2: ', end='')
 541             tmp_file_comment += 'STAGE2: '
 542
 543             for i in range(0, self.n_cores):
 544                 mask = len2mask(self.cores[i].n_pipelines)
 545                 pipelines_ht0 = self.bitpos_apply(
 546                     (~self.cores[i].counter) & mask,
 547                     self.cores[i].bitpos,
 548                     self.cores[i].n_pipelines)
 549
 550                 pipelines_ht1 = self.bitpos_apply(
 551                     self.cores[i].counter,
 552                     self.cores[i].bitpos,
 553                     self.cores[i].n_pipelines)
 554
 555                 print('C%dHT0 = [' % i, end='')
 556                 tmp_file_comment += "C{}HT0 = [".format(i)
 557                 tmp_file_comment += bitstring_write(
 558                     pipelines_ht0, self.n_pipelines)
 559
 560                 print(']\tC%dHT1 = [' % i, end='')
 561                 tmp_file_comment += "]\tC{}HT1 = [".format(i)
 562                 tmp_file_comment += bitstring_write(
 563                     pipelines_ht1, self.n_pipelines)
 564                 print(']\t', end='')
 565                 tmp_file_comment += ']\t'
 566
 567             print('')
 568             self.stage2_file_comment = tmp_file_comment
 569
 570         # check if file traceing is enabled
 571         if(enable_stage2_fileout != 1):
 572             return
 573         # spit out the combination to file
 574         self.stage2_process_file()
 575
 576     def stage2_updateCoresInBuf(self, nPipeline, sCore):
 577         rePipeline = self._fileTrace.arr_pipelines[nPipeline]
 578         rePipeline = rePipeline.replace("[", "\[").replace("]", "\]")
 579         reCore = 'core\s*=\s*((\d*)|(((s|S)\d)?(c|C)[1-9][0-9]*)).*\n'
 580         sSubs = 'core = ' + sCore + '\n'
 581
 582         reg_pipeline = re.compile(rePipeline)
 583         search_match = reg_pipeline.search(self._fileTrace.in_buf)
 584
 585         if(search_match):
 586             pos = search_match.start()
 587             substr1 = self._fileTrace.in_buf[:pos]
 588             substr2 = self._fileTrace.in_buf[pos:]
 589             substr2 = re.sub(reCore, sSubs, substr2, 1)
 590             self._fileTrace.in_buf = substr1 + substr2
 591
 592     def pipelines2cores(self, n, n_bits, nCore, bHT):
 593         if (n_bits > 64):
 594             return
 595
 596         i = n_bits - 1
 597         pipeline_idx = 0
 598         while (i >= 0):
 599             cond = (n & (1 << i))
 600             if (cond):
 601                 # update the pipelines array to match the core
 602                 # only in case of cond match
 603                 # PIPELINE0 and core 0 are reserved
 604                 if(bHT):
 605                     tmpCore = fileTrace.in_physical_cores[nCore] + 'h'
 606                     self.arr2_pipelines2cores[pipeline_idx] = tmpCore
 607                 else:
 608                     self.arr2_pipelines2cores[pipeline_idx] = \
 609                         fileTrace.in_physical_cores[nCore]
 610
 611             i -= 1
 612             pipeline_idx += 1
 613
 614     def stage2_process_file(self):
 615         outFileName = os.path.join(self._fileTrace.out_path,
 616                                    self._fileTrace.prefix_outfile)
 617         outFileName += "_{}CoReS".format(self.n_cores)
 618
 619         for i in range(0, self.n_cores):
 620             mask = len2mask(self.cores[i].n_pipelines)
 621             pipelines_ht0 = self.bitpos_apply((~self.cores[i].counter) & mask,
 622                                               self.cores[i].bitpos,
 623                                               self.cores[i].n_pipelines)
 624
 625             pipelines_ht1 = self.bitpos_apply(self.cores[i].counter,
 626                                               self.cores[i].bitpos,
 627                                               self.cores[i].n_pipelines)
 628
 629             # update pipelines to core mapping
 630             self.pipelines2cores(pipelines_ht0, self.n_pipelines, i, False)
 631             self.pipelines2cores(pipelines_ht1, self.n_pipelines, i, True)
 632
 633         # update the in_buf as per the arr_pipelines2cores
 634         for pipeline_idx in range(len(self.arr2_pipelines2cores)):
 635             outFileName += "_{}".format(
 636                 self.arr2_pipelines2cores[pipeline_idx])
 637             self.stage2_updateCoresInBuf(
 638                 pipeline_idx, self.arr2_pipelines2cores[pipeline_idx])
 639
 640         # by now the in_buf is all set to be written to file
 641         outFileName += self._fileTrace.suffix_outfile
 642         outputFile = open(outFileName, "w")
 643
 644         # write the file comments
 645         strTruncated = ("", "(Truncated)")[self._fileTrace.ncores_truncated]
 646         outputFile.write(
 647             "; =============== Pipeline-to-Core Mapping ================\n"
 648             "; Generated from file {}\n"
 649             "; Input pipelines = {}\n"
 650             "; Input cores = {}\n"
 651             "; N_PIPELINES = {}  N_CORES = {} {} hyper_thread = {} \n"
 652             .format(
 653                 self._fileTrace.in_file_namepath,
 654                 fileTrace.arr_pipelines,
 655                 fileTrace.in_physical_cores,
 656                 self._fileTrace.n_pipelines,
 657                 self._fileTrace.n_cores,
 658                 strTruncated,
 659                 self._fileTrace.hyper_thread))
 660
 661         outputFile.write(
 662             "; {stg0cmt}\n"
 663             "; {stg1cmt}\n"
 664             "; {stg2cmt}\n"
 665             "; ========================================================\n"
 666             "; \n"
 667             .format(
 668                 stg0cmt=self.stage0_file_comment,
 669                 stg1cmt=self.stage1_file_comment,
 670                 stg2cmt=self.stage2_file_comment))
 671
 672         # write the buffer contents
 673         outputFile.write(self._fileTrace.in_buf)
 674         outputFile.flush()
 675         outputFile.close()
 676
 677     def stage2_process(self):
 678         i = 0
 679         while(i < self.n_cores):
 680             self.cores[i].counter_max = len2mask(
 681                 self.cores[i].n_pipelines - 1)
 682             i += 1
 683
 684         self.pos = self.n_cores - 1
 685         while True:
 686             if (self.pos == self.n_cores - 1):
 687                 self.stage2_log()
 688
 689             if (self.cores[self.pos].counter ==
 690                     self.cores[self.pos].counter_max):
 691                 if (self.pos == 0):
 692                     return
 693
 694                 self.cores[self.pos].counter = 0
 695                 self.pos -= 1
 696                 continue
 697
 698             self.cores[self.pos].counter += 1
 699             if(self.pos < self.n_cores - 1):
 700                 self.pos += 1
 701
 702
 703 class FileTrace:
 704
 705     def __init__(self, filenamepath):
 706         self.in_file_namepath = os.path.abspath(filenamepath)
 707         self.in_filename = os.path.basename(self.in_file_namepath)
 708         self.in_path = os.path.dirname(self.in_file_namepath)
 709
 710         filenamesplit = self.in_filename.split('.')
 711         self.prefix_outfile = filenamesplit[0]
 712         self.suffix_outfile = ".cfg"
 713
 714         # output folder:  in the same folder as input file
 715         # create new folder in the name of input file
 716         self.out_path = os.path.join(
 717             os.path.abspath(os.path.dirname(__file__)),
 718             self.prefix_outfile)
 719
 720         try:
 721             os.makedirs(self.out_path)
 722         except OSError as excep:
 723             if excep.errno == errno.EEXIST and os.path.isdir(self.out_path):
 724                 pass
 725             else:
 726                 raise
 727
 728         self.in_buf = None
 729         self.arr_pipelines = []  # holds the positions of search
 730
 731         self.max_cores = 15
 732         self.max_pipelines = 15
 733
 734         self.in_physical_cores = None
 735         self.hyper_thread = None
 736
 737         # save the num of pipelines determined from input file
 738         self.n_pipelines = 0
 739         # save the num of cores input (or the truncated value)
 740         self.n_cores = 0
 741         self.ncores_truncated = False
 742
 743     def print_TraceFile(self):
 744         print("self.in_file_namepath = ", self.in_file_namepath)
 745         print("self.in_filename = ", self.in_filename)
 746         print("self.in_path = ", self.in_path)
 747         print("self.out_path = ", self.out_path)
 748         print("self.prefix_outfile = ", self.prefix_outfile)
 749         print("self.suffix_outfile = ", self.suffix_outfile)
 750         print("self.in_buf = ", self.in_buf)
 751         print("self.arr_pipelines =", self.arr_pipelines)
 752         print("self.in_physical_cores", self.in_physical_cores)
 753         print("self.hyper_thread", self.hyper_thread)
 754
 755
 756 def process(n_cores, n_pipelines, fileTrace):
 757     '''process and map pipelines, cores.'''
 758     if (n_cores == 0):
 759         sys.exit('N_CORES is 0, exiting')
 760
 761     if (n_pipelines == 0):
 762         sys.exit('N_PIPELINES is 0, exiting')
 763
 764     if (n_cores > n_pipelines):
 765         print('\nToo many cores, truncating N_CORES to N_PIPELINES')
 766         n_cores = n_pipelines
 767         fileTrace.ncores_truncated = True
 768
 769     fileTrace.n_pipelines = n_pipelines
 770     fileTrace.n_cores = n_cores
 771
 772     strTruncated = ("", "(Truncated)")[fileTrace.ncores_truncated]
 773     print("N_PIPELINES = {}, N_CORES = {} {}"
 774           .format(n_pipelines, n_cores, strTruncated))
 775     print("---------------------------------------------------------------")
 776
 777     ctx0_inst = Context0()
 778     ctx1_inst = Context1()
 779     ctx2_inst = Context2()
 780
 781     # initialize the class variables
 782     ctx1_inst._fileTrace = fileTrace
 783     ctx2_inst._fileTrace = fileTrace
 784
 785     ctx0_inst.stage0_init(n_cores, n_pipelines, ctx1_inst, ctx2_inst)
 786     ctx0_inst.stage0_process()
 787
 788
 789 def validate_core(core):
 790     match = reg_phycore.match(core)
 791     if(match):
 792         return True
 793     else:
 794         return False
 795
 796
 797 def validate_phycores(phy_cores):
 798     '''validate physical cores, check if unique.'''
 799     # eat up whitespaces
 800     phy_cores = phy_cores.strip().split(',')
 801
 802     # check if the core list is unique
 803     if(len(phy_cores) != len(set(phy_cores))):
 804         print('list of physical cores has duplicates')
 805         return None
 806
 807     for core in phy_cores:
 808         if not validate_core(core):
 809             print('invalid physical core specified.')
 810             return None
 811     return phy_cores
 812
 813
 814 def scanconfigfile(fileTrace):
 815     '''scan input file for pipelines, validate then process.'''
 816     # open file
 817     filetoscan = open(fileTrace.in_file_namepath, 'r')
 818     fileTrace.in_buf = filetoscan.read()
 819
 820     # reset iterator on open file
 821     filetoscan.seek(0)
 822
 823     # scan input file for pipelines
 824     # master pipelines to be ignored
 825     pattern_pipeline = r'\[PIPELINE\d*\]'
 826     pattern_mastertype = r'type\s*=\s*MASTER'
 827
 828     pending_pipeline = False
 829     for line in filetoscan:
 830         match_pipeline = re.search(pattern_pipeline, line)
 831         match_type = re.search('type\s*=', line)
 832         match_mastertype = re.search(pattern_mastertype, line)
 833
 834         if(match_pipeline):
 835             sPipeline = line[match_pipeline.start():match_pipeline.end()]
 836             pending_pipeline = True
 837         elif(match_type):
 838             # found a type definition...
 839             if(match_mastertype is None):
 840                 # and this is not a master pipeline...
 841                 if(pending_pipeline):
 842                     # add it to the list of pipelines to be mapped
 843                     fileTrace.arr_pipelines.append(sPipeline)
 844                     pending_pipeline = False
 845             else:
 846                 # and this is a master pipeline...
 847                 # ignore the current and move on to next
 848                 sPipeline = ""
 849                 pending_pipeline = False
 850     filetoscan.close()
 851
 852     # validate if pipelines are unique
 853     if(len(fileTrace.arr_pipelines) != len(set(fileTrace.arr_pipelines))):
 854         sys.exit('Error: duplicate pipelines in input file')
 855
 856     num_pipelines = len(fileTrace.arr_pipelines)
 857     num_cores = len(fileTrace.in_physical_cores)
 858
 859     print("-------------------Pipeline-to-core mapping--------------------")
 860     print("Input pipelines = {}\nInput cores = {}"
 861           .format(fileTrace.arr_pipelines, fileTrace.in_physical_cores))
 862
 863     # input configuration file validations goes here
 864     if (num_cores > fileTrace.max_cores):
 865         sys.exit('Error: number of cores specified > max_cores (%d)' %
 866                  fileTrace.max_cores)
 867
 868     if (num_pipelines > fileTrace.max_pipelines):
 869         sys.exit('Error: number of pipelines in input \
 870                 cfg file > max_pipelines (%d)' % fileTrace.max_pipelines)
 871
 872     # call process to generate pipeline-to-core mapping, trace and log
 873     process(num_cores, num_pipelines, fileTrace)
 874
 875
 876 if __name__ == "__main__":
 877     parser = argparse.ArgumentParser(description='mappipelines')
 878
 879     reqNamedGrp = parser.add_argument_group('required named args')
 880     reqNamedGrp.add_argument(
 881         '-i',
 882         '--input-file',
 883         type=argparse.FileType('r'),
 884         help='Input config file',
 885         required=True)
 886
 887     reqNamedGrp.add_argument(
 888         '-pc',
 889         '--physical-cores',
 890         type=validate_phycores,
 891         help='''Enter available CPU cores in
 892                 format:\"<core>,<core>,...\"
 893                 where each core format: \"s<SOCKETID>c<COREID>\"
 894                 where SOCKETID={0..9}, COREID={1-99}''',
 895         required=True)
 896
 897     # add optional arguments
 898     parser.add_argument(
 899         '-ht',
 900         '--hyper-thread',
 901         help='enable/disable hyper threading. default is ON',
 902         default='ON',
 903         choices=['ON', 'OFF'])
 904
 905     parser.add_argument(
 906         '-nO',
 907         '--no-output-file',
 908         help='''disable output config file generation.
 909                 Output file generation is enabled by default''',
 910         action="store_true")
 911
 912     args = parser.parse_args()
 913
 914     if(args.physical_cores is None):
 915         parser.error("invalid physical_cores specified")
 916
 917     # create object of FileTrace and initialise
 918     fileTrace = FileTrace(args.input_file.name)
 919     fileTrace.in_physical_cores = args.physical_cores
 920     fileTrace.hyper_thread = args.hyper_thread
 921
 922     if(fileTrace.hyper_thread == 'OFF'):
 923         print("!!!!disabling stage2 HT!!!!")
 924         enable_stage2_traceout = 0
 925         enable_stage2_fileout = 0
 926     elif(fileTrace.hyper_thread == 'ON'):
 927         print("!!!!HT enabled. disabling stage1 file generation.!!!!")
 928         enable_stage1_fileout = 0
 929
 930     if(args.no_output_file is True):
 931         print("!!!!disabling stage1 and stage2 fileout!!!!")
 932         enable_stage1_fileout = 0
 933         enable_stage2_fileout = 0
 934
 935     scanconfigfile(fileTrace)