9d57fdef369f1b2721e9218be5fd17432a87ca1f
[deb_dpdk.git] / examples / l3fwd-power / main.c
1 /*-
2  *   BSD LICENSE
3  *
4  *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
5  *   All rights reserved.
6  *
7  *   Redistribution and use in source and binary forms, with or without
8  *   modification, are permitted provided that the following conditions
9  *   are met:
10  *
11  *     * Redistributions of source code must retain the above copyright
12  *       notice, this list of conditions and the following disclaimer.
13  *     * Redistributions in binary form must reproduce the above copyright
14  *       notice, this list of conditions and the following disclaimer in
15  *       the documentation and/or other materials provided with the
16  *       distribution.
17  *     * Neither the name of Intel Corporation nor the names of its
18  *       contributors may be used to endorse or promote products derived
19  *       from this software without specific prior written permission.
20  *
21  *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24  *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25  *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26  *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27  *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28  *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29  *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  */
33
34 #include <stdio.h>
35 #include <stdlib.h>
36 #include <stdint.h>
37 #include <inttypes.h>
38 #include <sys/types.h>
39 #include <string.h>
40 #include <sys/queue.h>
41 #include <stdarg.h>
42 #include <errno.h>
43 #include <getopt.h>
44 #include <unistd.h>
45 #include <signal.h>
46
47 #include <rte_common.h>
48 #include <rte_byteorder.h>
49 #include <rte_log.h>
50 #include <rte_malloc.h>
51 #include <rte_memory.h>
52 #include <rte_memcpy.h>
53 #include <rte_memzone.h>
54 #include <rte_eal.h>
55 #include <rte_per_lcore.h>
56 #include <rte_launch.h>
57 #include <rte_atomic.h>
58 #include <rte_cycles.h>
59 #include <rte_prefetch.h>
60 #include <rte_lcore.h>
61 #include <rte_per_lcore.h>
62 #include <rte_branch_prediction.h>
63 #include <rte_interrupts.h>
64 #include <rte_pci.h>
65 #include <rte_random.h>
66 #include <rte_debug.h>
67 #include <rte_ether.h>
68 #include <rte_ethdev.h>
69 #include <rte_mempool.h>
70 #include <rte_mbuf.h>
71 #include <rte_ip.h>
72 #include <rte_tcp.h>
73 #include <rte_udp.h>
74 #include <rte_string_fns.h>
75 #include <rte_timer.h>
76 #include <rte_power.h>
77 #include <rte_eal.h>
78 #include <rte_spinlock.h>
79
80 #define RTE_LOGTYPE_L3FWD_POWER RTE_LOGTYPE_USER1
81
82 #define MAX_PKT_BURST 32
83
84 #define MIN_ZERO_POLL_COUNT 10
85
86 /* around 100ms at 2 Ghz */
87 #define TIMER_RESOLUTION_CYCLES           200000000ULL
88 /* 100 ms interval */
89 #define TIMER_NUMBER_PER_SECOND           10
90 /* 100000 us */
91 #define SCALING_PERIOD                    (1000000/TIMER_NUMBER_PER_SECOND)
92 #define SCALING_DOWN_TIME_RATIO_THRESHOLD 0.25
93
94 #define APP_LOOKUP_EXACT_MATCH          0
95 #define APP_LOOKUP_LPM                  1
96 #define DO_RFC_1812_CHECKS
97
98 #ifndef APP_LOOKUP_METHOD
99 #define APP_LOOKUP_METHOD             APP_LOOKUP_LPM
100 #endif
101
102 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
103 #include <rte_hash.h>
104 #elif (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
105 #include <rte_lpm.h>
106 #else
107 #error "APP_LOOKUP_METHOD set to incorrect value"
108 #endif
109
110 #ifndef IPv6_BYTES
111 #define IPv6_BYTES_FMT "%02x%02x:%02x%02x:%02x%02x:%02x%02x:"\
112                        "%02x%02x:%02x%02x:%02x%02x:%02x%02x"
113 #define IPv6_BYTES(addr) \
114         addr[0],  addr[1], addr[2],  addr[3], \
115         addr[4],  addr[5], addr[6],  addr[7], \
116         addr[8],  addr[9], addr[10], addr[11],\
117         addr[12], addr[13],addr[14], addr[15]
118 #endif
119
120 #define MAX_JUMBO_PKT_LEN  9600
121
122 #define IPV6_ADDR_LEN 16
123
124 #define MEMPOOL_CACHE_SIZE 256
125
126 /*
127  * This expression is used to calculate the number of mbufs needed depending on
128  * user input, taking into account memory for rx and tx hardware rings, cache
129  * per lcore and mtable per port per lcore. RTE_MAX is used to ensure that
130  * NB_MBUF never goes below a minimum value of 8192.
131  */
132
133 #define NB_MBUF RTE_MAX ( \
134         (nb_ports*nb_rx_queue*RTE_TEST_RX_DESC_DEFAULT + \
135         nb_ports*nb_lcores*MAX_PKT_BURST + \
136         nb_ports*n_tx_queue*RTE_TEST_TX_DESC_DEFAULT + \
137         nb_lcores*MEMPOOL_CACHE_SIZE), \
138         (unsigned)8192)
139
140 #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
141
142 #define NB_SOCKETS 8
143
144 /* Configure how many packets ahead to prefetch, when reading packets */
145 #define PREFETCH_OFFSET 3
146
147 /*
148  * Configurable number of RX/TX ring descriptors
149  */
150 #define RTE_TEST_RX_DESC_DEFAULT 512
151 #define RTE_TEST_TX_DESC_DEFAULT 512
152 static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
153 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
154
155 /* ethernet addresses of ports */
156 static struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
157
158 /* ethernet addresses of ports */
159 static rte_spinlock_t locks[RTE_MAX_ETHPORTS];
160
161 /* mask of enabled ports */
162 static uint32_t enabled_port_mask = 0;
163 /* Ports set in promiscuous mode off by default. */
164 static int promiscuous_on = 0;
165 /* NUMA is enabled by default. */
166 static int numa_on = 1;
167 static int parse_ptype; /**< Parse packet type using rx callback, and */
168                         /**< disabled by default */
169
170 enum freq_scale_hint_t
171 {
172         FREQ_LOWER    =      -1,
173         FREQ_CURRENT  =       0,
174         FREQ_HIGHER   =       1,
175         FREQ_HIGHEST  =       2
176 };
177
178 struct lcore_rx_queue {
179         uint8_t port_id;
180         uint8_t queue_id;
181         enum freq_scale_hint_t freq_up_hint;
182         uint32_t zero_rx_packet_count;
183         uint32_t idle_hint;
184 } __rte_cache_aligned;
185
186 #define MAX_RX_QUEUE_PER_LCORE 16
187 #define MAX_TX_QUEUE_PER_PORT RTE_MAX_ETHPORTS
188 #define MAX_RX_QUEUE_PER_PORT 128
189
190 #define MAX_RX_QUEUE_INTERRUPT_PER_PORT 16
191
192
193 #define MAX_LCORE_PARAMS 1024
194 struct lcore_params {
195         uint8_t port_id;
196         uint8_t queue_id;
197         uint8_t lcore_id;
198 } __rte_cache_aligned;
199
200 static struct lcore_params lcore_params_array[MAX_LCORE_PARAMS];
201 static struct lcore_params lcore_params_array_default[] = {
202         {0, 0, 2},
203         {0, 1, 2},
204         {0, 2, 2},
205         {1, 0, 2},
206         {1, 1, 2},
207         {1, 2, 2},
208         {2, 0, 2},
209         {3, 0, 3},
210         {3, 1, 3},
211 };
212
213 static struct lcore_params * lcore_params = lcore_params_array_default;
214 static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) /
215                                 sizeof(lcore_params_array_default[0]);
216
217 static struct rte_eth_conf port_conf = {
218         .rxmode = {
219                 .mq_mode        = ETH_MQ_RX_RSS,
220                 .max_rx_pkt_len = ETHER_MAX_LEN,
221                 .split_hdr_size = 0,
222                 .header_split   = 0, /**< Header Split disabled */
223                 .hw_ip_checksum = 1, /**< IP checksum offload enabled */
224                 .hw_vlan_filter = 0, /**< VLAN filtering disabled */
225                 .jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
226                 .hw_strip_crc   = 1, /**< CRC stripped by hardware */
227         },
228         .rx_adv_conf = {
229                 .rss_conf = {
230                         .rss_key = NULL,
231                         .rss_hf = ETH_RSS_UDP,
232                 },
233         },
234         .txmode = {
235                 .mq_mode = ETH_MQ_TX_NONE,
236         },
237         .intr_conf = {
238                 .lsc = 1,
239                 .rxq = 1,
240         },
241 };
242
243 static struct rte_mempool * pktmbuf_pool[NB_SOCKETS];
244
245
246 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
247
248 #ifdef RTE_MACHINE_CPUFLAG_SSE4_2
249 #include <rte_hash_crc.h>
250 #define DEFAULT_HASH_FUNC       rte_hash_crc
251 #else
252 #include <rte_jhash.h>
253 #define DEFAULT_HASH_FUNC       rte_jhash
254 #endif
255
256 struct ipv4_5tuple {
257         uint32_t ip_dst;
258         uint32_t ip_src;
259         uint16_t port_dst;
260         uint16_t port_src;
261         uint8_t  proto;
262 } __attribute__((__packed__));
263
264 struct ipv6_5tuple {
265         uint8_t  ip_dst[IPV6_ADDR_LEN];
266         uint8_t  ip_src[IPV6_ADDR_LEN];
267         uint16_t port_dst;
268         uint16_t port_src;
269         uint8_t  proto;
270 } __attribute__((__packed__));
271
272 struct ipv4_l3fwd_route {
273         struct ipv4_5tuple key;
274         uint8_t if_out;
275 };
276
277 struct ipv6_l3fwd_route {
278         struct ipv6_5tuple key;
279         uint8_t if_out;
280 };
281
282 static struct ipv4_l3fwd_route ipv4_l3fwd_route_array[] = {
283         {{IPv4(100,10,0,1), IPv4(200,10,0,1), 101, 11, IPPROTO_TCP}, 0},
284         {{IPv4(100,20,0,2), IPv4(200,20,0,2), 102, 12, IPPROTO_TCP}, 1},
285         {{IPv4(100,30,0,3), IPv4(200,30,0,3), 103, 13, IPPROTO_TCP}, 2},
286         {{IPv4(100,40,0,4), IPv4(200,40,0,4), 104, 14, IPPROTO_TCP}, 3},
287 };
288
289 static struct ipv6_l3fwd_route ipv6_l3fwd_route_array[] = {
290         {
291                 {
292                         {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
293                          0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
294                         {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
295                          0x02, 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a},
296                          1, 10, IPPROTO_UDP
297                 }, 4
298         },
299 };
300
301 typedef struct rte_hash lookup_struct_t;
302 static lookup_struct_t *ipv4_l3fwd_lookup_struct[NB_SOCKETS];
303 static lookup_struct_t *ipv6_l3fwd_lookup_struct[NB_SOCKETS];
304
305 #define L3FWD_HASH_ENTRIES      1024
306
307 #define IPV4_L3FWD_NUM_ROUTES \
308         (sizeof(ipv4_l3fwd_route_array) / sizeof(ipv4_l3fwd_route_array[0]))
309
310 #define IPV6_L3FWD_NUM_ROUTES \
311         (sizeof(ipv6_l3fwd_route_array) / sizeof(ipv6_l3fwd_route_array[0]))
312
313 static uint8_t ipv4_l3fwd_out_if[L3FWD_HASH_ENTRIES] __rte_cache_aligned;
314 static uint8_t ipv6_l3fwd_out_if[L3FWD_HASH_ENTRIES] __rte_cache_aligned;
315 #endif
316
317 #if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
318 struct ipv4_l3fwd_route {
319         uint32_t ip;
320         uint8_t  depth;
321         uint8_t  if_out;
322 };
323
324 static struct ipv4_l3fwd_route ipv4_l3fwd_route_array[] = {
325         {IPv4(1,1,1,0), 24, 0},
326         {IPv4(2,1,1,0), 24, 1},
327         {IPv4(3,1,1,0), 24, 2},
328         {IPv4(4,1,1,0), 24, 3},
329         {IPv4(5,1,1,0), 24, 4},
330         {IPv4(6,1,1,0), 24, 5},
331         {IPv4(7,1,1,0), 24, 6},
332         {IPv4(8,1,1,0), 24, 7},
333 };
334
335 #define IPV4_L3FWD_NUM_ROUTES \
336         (sizeof(ipv4_l3fwd_route_array) / sizeof(ipv4_l3fwd_route_array[0]))
337
338 #define IPV4_L3FWD_LPM_MAX_RULES     1024
339
340 typedef struct rte_lpm lookup_struct_t;
341 static lookup_struct_t *ipv4_l3fwd_lookup_struct[NB_SOCKETS];
342 #endif
343
344 struct lcore_conf {
345         uint16_t n_rx_queue;
346         struct lcore_rx_queue rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
347         uint16_t n_tx_port;
348         uint16_t tx_port_id[RTE_MAX_ETHPORTS];
349         uint16_t tx_queue_id[RTE_MAX_ETHPORTS];
350         struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
351         lookup_struct_t * ipv4_lookup_struct;
352         lookup_struct_t * ipv6_lookup_struct;
353 } __rte_cache_aligned;
354
355 struct lcore_stats {
356         /* total sleep time in ms since last frequency scaling down */
357         uint32_t sleep_time;
358         /* number of long sleep recently */
359         uint32_t nb_long_sleep;
360         /* freq. scaling up trend */
361         uint32_t trend;
362         /* total packet processed recently */
363         uint64_t nb_rx_processed;
364         /* total iterations looped recently */
365         uint64_t nb_iteration_looped;
366         uint32_t padding[9];
367 } __rte_cache_aligned;
368
369 static struct lcore_conf lcore_conf[RTE_MAX_LCORE] __rte_cache_aligned;
370 static struct lcore_stats stats[RTE_MAX_LCORE] __rte_cache_aligned;
371 static struct rte_timer power_timers[RTE_MAX_LCORE];
372
373 static inline uint32_t power_idle_heuristic(uint32_t zero_rx_packet_count);
374 static inline enum freq_scale_hint_t power_freq_scaleup_heuristic( \
375                         unsigned lcore_id, uint8_t port_id, uint16_t queue_id);
376
377 /* exit signal handler */
378 static void
379 signal_exit_now(int sigtype)
380 {
381         unsigned lcore_id;
382         unsigned int portid, nb_ports;
383         int ret;
384
385         if (sigtype == SIGINT) {
386                 for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
387                         if (rte_lcore_is_enabled(lcore_id) == 0)
388                                 continue;
389
390                         /* init power management library */
391                         ret = rte_power_exit(lcore_id);
392                         if (ret)
393                                 rte_exit(EXIT_FAILURE, "Power management "
394                                         "library de-initialization failed on "
395                                                         "core%u\n", lcore_id);
396                 }
397
398                 nb_ports = rte_eth_dev_count();
399                 for (portid = 0; portid < nb_ports; portid++) {
400                         if ((enabled_port_mask & (1 << portid)) == 0)
401                                 continue;
402
403                         rte_eth_dev_stop(portid);
404                         rte_eth_dev_close(portid);
405                 }
406         }
407
408         rte_exit(EXIT_SUCCESS, "User forced exit\n");
409 }
410
411 /*  Freqency scale down timer callback */
412 static void
413 power_timer_cb(__attribute__((unused)) struct rte_timer *tim,
414                           __attribute__((unused)) void *arg)
415 {
416         uint64_t hz;
417         float sleep_time_ratio;
418         unsigned lcore_id = rte_lcore_id();
419
420         /* accumulate total execution time in us when callback is invoked */
421         sleep_time_ratio = (float)(stats[lcore_id].sleep_time) /
422                                         (float)SCALING_PERIOD;
423         /**
424          * check whether need to scale down frequency a step if it sleep a lot.
425          */
426         if (sleep_time_ratio >= SCALING_DOWN_TIME_RATIO_THRESHOLD) {
427                 if (rte_power_freq_down)
428                         rte_power_freq_down(lcore_id);
429         }
430         else if ( (unsigned)(stats[lcore_id].nb_rx_processed /
431                 stats[lcore_id].nb_iteration_looped) < MAX_PKT_BURST) {
432                 /**
433                  * scale down a step if average packet per iteration less
434                  * than expectation.
435                  */
436                 if (rte_power_freq_down)
437                         rte_power_freq_down(lcore_id);
438         }
439
440         /**
441          * initialize another timer according to current frequency to ensure
442          * timer interval is relatively fixed.
443          */
444         hz = rte_get_timer_hz();
445         rte_timer_reset(&power_timers[lcore_id], hz/TIMER_NUMBER_PER_SECOND,
446                                 SINGLE, lcore_id, power_timer_cb, NULL);
447
448         stats[lcore_id].nb_rx_processed = 0;
449         stats[lcore_id].nb_iteration_looped = 0;
450
451         stats[lcore_id].sleep_time = 0;
452 }
453
454 /* Enqueue a single packet, and send burst if queue is filled */
455 static inline int
456 send_single_packet(struct rte_mbuf *m, uint8_t port)
457 {
458         uint32_t lcore_id;
459         struct lcore_conf *qconf;
460
461         lcore_id = rte_lcore_id();
462         qconf = &lcore_conf[lcore_id];
463
464         rte_eth_tx_buffer(port, qconf->tx_queue_id[port],
465                         qconf->tx_buffer[port], m);
466
467         return 0;
468 }
469
470 #ifdef DO_RFC_1812_CHECKS
471 static inline int
472 is_valid_ipv4_pkt(struct ipv4_hdr *pkt, uint32_t link_len)
473 {
474         /* From http://www.rfc-editor.org/rfc/rfc1812.txt section 5.2.2 */
475         /*
476          * 1. The packet length reported by the Link Layer must be large
477          * enough to hold the minimum length legal IP datagram (20 bytes).
478          */
479         if (link_len < sizeof(struct ipv4_hdr))
480                 return -1;
481
482         /* 2. The IP checksum must be correct. */
483         /* this is checked in H/W */
484
485         /*
486          * 3. The IP version number must be 4. If the version number is not 4
487          * then the packet may be another version of IP, such as IPng or
488          * ST-II.
489          */
490         if (((pkt->version_ihl) >> 4) != 4)
491                 return -3;
492         /*
493          * 4. The IP header length field must be large enough to hold the
494          * minimum length legal IP datagram (20 bytes = 5 words).
495          */
496         if ((pkt->version_ihl & 0xf) < 5)
497                 return -4;
498
499         /*
500          * 5. The IP total length field must be large enough to hold the IP
501          * datagram header, whose length is specified in the IP header length
502          * field.
503          */
504         if (rte_cpu_to_be_16(pkt->total_length) < sizeof(struct ipv4_hdr))
505                 return -5;
506
507         return 0;
508 }
509 #endif
510
511 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
512 static void
513 print_ipv4_key(struct ipv4_5tuple key)
514 {
515         printf("IP dst = %08x, IP src = %08x, port dst = %d, port src = %d, "
516                 "proto = %d\n", (unsigned)key.ip_dst, (unsigned)key.ip_src,
517                                 key.port_dst, key.port_src, key.proto);
518 }
519 static void
520 print_ipv6_key(struct ipv6_5tuple key)
521 {
522         printf( "IP dst = " IPv6_BYTES_FMT ", IP src = " IPv6_BYTES_FMT ", "
523                 "port dst = %d, port src = %d, proto = %d\n",
524                 IPv6_BYTES(key.ip_dst), IPv6_BYTES(key.ip_src),
525                 key.port_dst, key.port_src, key.proto);
526 }
527
528 static inline uint8_t
529 get_ipv4_dst_port(struct ipv4_hdr *ipv4_hdr, uint8_t portid,
530                 lookup_struct_t * ipv4_l3fwd_lookup_struct)
531 {
532         struct ipv4_5tuple key;
533         struct tcp_hdr *tcp;
534         struct udp_hdr *udp;
535         int ret = 0;
536
537         key.ip_dst = rte_be_to_cpu_32(ipv4_hdr->dst_addr);
538         key.ip_src = rte_be_to_cpu_32(ipv4_hdr->src_addr);
539         key.proto = ipv4_hdr->next_proto_id;
540
541         switch (ipv4_hdr->next_proto_id) {
542         case IPPROTO_TCP:
543                 tcp = (struct tcp_hdr *)((unsigned char *)ipv4_hdr +
544                                         sizeof(struct ipv4_hdr));
545                 key.port_dst = rte_be_to_cpu_16(tcp->dst_port);
546                 key.port_src = rte_be_to_cpu_16(tcp->src_port);
547                 break;
548
549         case IPPROTO_UDP:
550                 udp = (struct udp_hdr *)((unsigned char *)ipv4_hdr +
551                                         sizeof(struct ipv4_hdr));
552                 key.port_dst = rte_be_to_cpu_16(udp->dst_port);
553                 key.port_src = rte_be_to_cpu_16(udp->src_port);
554                 break;
555
556         default:
557                 key.port_dst = 0;
558                 key.port_src = 0;
559                 break;
560         }
561
562         /* Find destination port */
563         ret = rte_hash_lookup(ipv4_l3fwd_lookup_struct, (const void *)&key);
564         return (uint8_t)((ret < 0)? portid : ipv4_l3fwd_out_if[ret]);
565 }
566
567 static inline uint8_t
568 get_ipv6_dst_port(struct ipv6_hdr *ipv6_hdr,  uint8_t portid,
569                         lookup_struct_t *ipv6_l3fwd_lookup_struct)
570 {
571         struct ipv6_5tuple key;
572         struct tcp_hdr *tcp;
573         struct udp_hdr *udp;
574         int ret = 0;
575
576         memcpy(key.ip_dst, ipv6_hdr->dst_addr, IPV6_ADDR_LEN);
577         memcpy(key.ip_src, ipv6_hdr->src_addr, IPV6_ADDR_LEN);
578
579         key.proto = ipv6_hdr->proto;
580
581         switch (ipv6_hdr->proto) {
582         case IPPROTO_TCP:
583                 tcp = (struct tcp_hdr *)((unsigned char *) ipv6_hdr +
584                                         sizeof(struct ipv6_hdr));
585                 key.port_dst = rte_be_to_cpu_16(tcp->dst_port);
586                 key.port_src = rte_be_to_cpu_16(tcp->src_port);
587                 break;
588
589         case IPPROTO_UDP:
590                 udp = (struct udp_hdr *)((unsigned char *) ipv6_hdr +
591                                         sizeof(struct ipv6_hdr));
592                 key.port_dst = rte_be_to_cpu_16(udp->dst_port);
593                 key.port_src = rte_be_to_cpu_16(udp->src_port);
594                 break;
595
596         default:
597                 key.port_dst = 0;
598                 key.port_src = 0;
599                 break;
600         }
601
602         /* Find destination port */
603         ret = rte_hash_lookup(ipv6_l3fwd_lookup_struct, (const void *)&key);
604         return (uint8_t)((ret < 0)? portid : ipv6_l3fwd_out_if[ret]);
605 }
606 #endif
607
608 #if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
609 static inline uint8_t
610 get_ipv4_dst_port(struct ipv4_hdr *ipv4_hdr, uint8_t portid,
611                 lookup_struct_t *ipv4_l3fwd_lookup_struct)
612 {
613         uint32_t next_hop;
614
615         return (uint8_t) ((rte_lpm_lookup(ipv4_l3fwd_lookup_struct,
616                         rte_be_to_cpu_32(ipv4_hdr->dst_addr), &next_hop) == 0)?
617                         next_hop : portid);
618 }
619 #endif
620
621 static inline void
622 parse_ptype_one(struct rte_mbuf *m)
623 {
624         struct ether_hdr *eth_hdr;
625         uint32_t packet_type = RTE_PTYPE_UNKNOWN;
626         uint16_t ether_type;
627
628         eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
629         ether_type = eth_hdr->ether_type;
630         if (ether_type == rte_cpu_to_be_16(ETHER_TYPE_IPv4))
631                 packet_type |= RTE_PTYPE_L3_IPV4_EXT_UNKNOWN;
632         else if (ether_type == rte_cpu_to_be_16(ETHER_TYPE_IPv6))
633                 packet_type |= RTE_PTYPE_L3_IPV6_EXT_UNKNOWN;
634
635         m->packet_type = packet_type;
636 }
637
638 static uint16_t
639 cb_parse_ptype(uint8_t port __rte_unused, uint16_t queue __rte_unused,
640                struct rte_mbuf *pkts[], uint16_t nb_pkts,
641                uint16_t max_pkts __rte_unused,
642                void *user_param __rte_unused)
643 {
644         unsigned int i;
645
646         for (i = 0; i < nb_pkts; ++i)
647                 parse_ptype_one(pkts[i]);
648
649         return nb_pkts;
650 }
651
652 static int
653 add_cb_parse_ptype(uint8_t portid, uint16_t queueid)
654 {
655         printf("Port %d: softly parse packet type info\n", portid);
656         if (rte_eth_add_rx_callback(portid, queueid, cb_parse_ptype, NULL))
657                 return 0;
658
659         printf("Failed to add rx callback: port=%d\n", portid);
660         return -1;
661 }
662
663 static inline void
664 l3fwd_simple_forward(struct rte_mbuf *m, uint8_t portid,
665                                 struct lcore_conf *qconf)
666 {
667         struct ether_hdr *eth_hdr;
668         struct ipv4_hdr *ipv4_hdr;
669         void *d_addr_bytes;
670         uint8_t dst_port;
671
672         eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
673
674         if (RTE_ETH_IS_IPV4_HDR(m->packet_type)) {
675                 /* Handle IPv4 headers.*/
676                 ipv4_hdr =
677                         rte_pktmbuf_mtod_offset(m, struct ipv4_hdr *,
678                                                 sizeof(struct ether_hdr));
679
680 #ifdef DO_RFC_1812_CHECKS
681                 /* Check to make sure the packet is valid (RFC1812) */
682                 if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt_len) < 0) {
683                         rte_pktmbuf_free(m);
684                         return;
685                 }
686 #endif
687
688                 dst_port = get_ipv4_dst_port(ipv4_hdr, portid,
689                                         qconf->ipv4_lookup_struct);
690                 if (dst_port >= RTE_MAX_ETHPORTS ||
691                                 (enabled_port_mask & 1 << dst_port) == 0)
692                         dst_port = portid;
693
694                 /* 02:00:00:00:00:xx */
695                 d_addr_bytes = &eth_hdr->d_addr.addr_bytes[0];
696                 *((uint64_t *)d_addr_bytes) =
697                         0x000000000002 + ((uint64_t)dst_port << 40);
698
699 #ifdef DO_RFC_1812_CHECKS
700                 /* Update time to live and header checksum */
701                 --(ipv4_hdr->time_to_live);
702                 ++(ipv4_hdr->hdr_checksum);
703 #endif
704
705                 /* src addr */
706                 ether_addr_copy(&ports_eth_addr[dst_port], &eth_hdr->s_addr);
707
708                 send_single_packet(m, dst_port);
709         } else if (RTE_ETH_IS_IPV6_HDR(m->packet_type)) {
710                 /* Handle IPv6 headers.*/
711 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
712                 struct ipv6_hdr *ipv6_hdr;
713
714                 ipv6_hdr =
715                         rte_pktmbuf_mtod_offset(m, struct ipv6_hdr *,
716                                                 sizeof(struct ether_hdr));
717
718                 dst_port = get_ipv6_dst_port(ipv6_hdr, portid,
719                                         qconf->ipv6_lookup_struct);
720
721                 if (dst_port >= RTE_MAX_ETHPORTS ||
722                                 (enabled_port_mask & 1 << dst_port) == 0)
723                         dst_port = portid;
724
725                 /* 02:00:00:00:00:xx */
726                 d_addr_bytes = &eth_hdr->d_addr.addr_bytes[0];
727                 *((uint64_t *)d_addr_bytes) =
728                         0x000000000002 + ((uint64_t)dst_port << 40);
729
730                 /* src addr */
731                 ether_addr_copy(&ports_eth_addr[dst_port], &eth_hdr->s_addr);
732
733                 send_single_packet(m, dst_port);
734 #else
735                 /* We don't currently handle IPv6 packets in LPM mode. */
736                 rte_pktmbuf_free(m);
737 #endif
738         } else
739                 rte_pktmbuf_free(m);
740
741 }
742
743 #define MINIMUM_SLEEP_TIME         1
744 #define SUSPEND_THRESHOLD          300
745
746 static inline uint32_t
747 power_idle_heuristic(uint32_t zero_rx_packet_count)
748 {
749         /* If zero count is less than 100,  sleep 1us */
750         if (zero_rx_packet_count < SUSPEND_THRESHOLD)
751                 return MINIMUM_SLEEP_TIME;
752         /* If zero count is less than 1000, sleep 100 us which is the
753                 minimum latency switching from C3/C6 to C0
754         */
755         else
756                 return SUSPEND_THRESHOLD;
757
758         return 0;
759 }
760
761 static inline enum freq_scale_hint_t
762 power_freq_scaleup_heuristic(unsigned lcore_id,
763                              uint8_t port_id,
764                              uint16_t queue_id)
765 {
766 /**
767  * HW Rx queue size is 128 by default, Rx burst read at maximum 32 entries
768  * per iteration
769  */
770 #define FREQ_GEAR1_RX_PACKET_THRESHOLD             MAX_PKT_BURST
771 #define FREQ_GEAR2_RX_PACKET_THRESHOLD             (MAX_PKT_BURST*2)
772 #define FREQ_GEAR3_RX_PACKET_THRESHOLD             (MAX_PKT_BURST*3)
773 #define FREQ_UP_TREND1_ACC   1
774 #define FREQ_UP_TREND2_ACC   100
775 #define FREQ_UP_THRESHOLD    10000
776
777         if (likely(rte_eth_rx_descriptor_done(port_id, queue_id,
778                         FREQ_GEAR3_RX_PACKET_THRESHOLD) > 0)) {
779                 stats[lcore_id].trend = 0;
780                 return FREQ_HIGHEST;
781         } else if (likely(rte_eth_rx_descriptor_done(port_id, queue_id,
782                         FREQ_GEAR2_RX_PACKET_THRESHOLD) > 0))
783                 stats[lcore_id].trend += FREQ_UP_TREND2_ACC;
784         else if (likely(rte_eth_rx_descriptor_done(port_id, queue_id,
785                         FREQ_GEAR1_RX_PACKET_THRESHOLD) > 0))
786                 stats[lcore_id].trend += FREQ_UP_TREND1_ACC;
787
788         if (likely(stats[lcore_id].trend > FREQ_UP_THRESHOLD)) {
789                 stats[lcore_id].trend = 0;
790                 return FREQ_HIGHER;
791         }
792
793         return FREQ_CURRENT;
794 }
795
796 /**
797  * force polling thread sleep until one-shot rx interrupt triggers
798  * @param port_id
799  *  Port id.
800  * @param queue_id
801  *  Rx queue id.
802  * @return
803  *  0 on success
804  */
805 static int
806 sleep_until_rx_interrupt(int num)
807 {
808         struct rte_epoll_event event[num];
809         int n, i;
810         uint8_t port_id, queue_id;
811         void *data;
812
813         RTE_LOG(INFO, L3FWD_POWER,
814                 "lcore %u sleeps until interrupt triggers\n",
815                 rte_lcore_id());
816
817         n = rte_epoll_wait(RTE_EPOLL_PER_THREAD, event, num, -1);
818         for (i = 0; i < n; i++) {
819                 data = event[i].epdata.data;
820                 port_id = ((uintptr_t)data) >> CHAR_BIT;
821                 queue_id = ((uintptr_t)data) &
822                         RTE_LEN2MASK(CHAR_BIT, uint8_t);
823                 rte_eth_dev_rx_intr_disable(port_id, queue_id);
824                 RTE_LOG(INFO, L3FWD_POWER,
825                         "lcore %u is waked up from rx interrupt on"
826                         " port %d queue %d\n",
827                         rte_lcore_id(), port_id, queue_id);
828         }
829
830         return 0;
831 }
832
833 static void turn_on_intr(struct lcore_conf *qconf)
834 {
835         int i;
836         struct lcore_rx_queue *rx_queue;
837         uint8_t port_id, queue_id;
838
839         for (i = 0; i < qconf->n_rx_queue; ++i) {
840                 rx_queue = &(qconf->rx_queue_list[i]);
841                 port_id = rx_queue->port_id;
842                 queue_id = rx_queue->queue_id;
843
844                 rte_spinlock_lock(&(locks[port_id]));
845                 rte_eth_dev_rx_intr_enable(port_id, queue_id);
846                 rte_spinlock_unlock(&(locks[port_id]));
847         }
848 }
849
850 static int event_register(struct lcore_conf *qconf)
851 {
852         struct lcore_rx_queue *rx_queue;
853         uint8_t portid, queueid;
854         uint32_t data;
855         int ret;
856         int i;
857
858         for (i = 0; i < qconf->n_rx_queue; ++i) {
859                 rx_queue = &(qconf->rx_queue_list[i]);
860                 portid = rx_queue->port_id;
861                 queueid = rx_queue->queue_id;
862                 data = portid << CHAR_BIT | queueid;
863
864                 ret = rte_eth_dev_rx_intr_ctl_q(portid, queueid,
865                                                 RTE_EPOLL_PER_THREAD,
866                                                 RTE_INTR_EVENT_ADD,
867                                                 (void *)((uintptr_t)data));
868                 if (ret)
869                         return ret;
870         }
871
872         return 0;
873 }
874
875 /* main processing loop */
876 static int
877 main_loop(__attribute__((unused)) void *dummy)
878 {
879         struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
880         unsigned lcore_id;
881         uint64_t prev_tsc, diff_tsc, cur_tsc;
882         uint64_t prev_tsc_power = 0, cur_tsc_power, diff_tsc_power;
883         int i, j, nb_rx;
884         uint8_t portid, queueid;
885         struct lcore_conf *qconf;
886         struct lcore_rx_queue *rx_queue;
887         enum freq_scale_hint_t lcore_scaleup_hint;
888         uint32_t lcore_rx_idle_count = 0;
889         uint32_t lcore_idle_hint = 0;
890         int intr_en = 0;
891
892         const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
893
894         prev_tsc = 0;
895
896         lcore_id = rte_lcore_id();
897         qconf = &lcore_conf[lcore_id];
898
899         if (qconf->n_rx_queue == 0) {
900                 RTE_LOG(INFO, L3FWD_POWER, "lcore %u has nothing to do\n", lcore_id);
901                 return 0;
902         }
903
904         RTE_LOG(INFO, L3FWD_POWER, "entering main loop on lcore %u\n", lcore_id);
905
906         for (i = 0; i < qconf->n_rx_queue; i++) {
907                 portid = qconf->rx_queue_list[i].port_id;
908                 queueid = qconf->rx_queue_list[i].queue_id;
909                 RTE_LOG(INFO, L3FWD_POWER, " -- lcoreid=%u portid=%hhu "
910                         "rxqueueid=%hhu\n", lcore_id, portid, queueid);
911         }
912
913         /* add into event wait list */
914         if (event_register(qconf) == 0)
915                 intr_en = 1;
916         else
917                 RTE_LOG(INFO, L3FWD_POWER, "RX interrupt won't enable.\n");
918
919         while (1) {
920                 stats[lcore_id].nb_iteration_looped++;
921
922                 cur_tsc = rte_rdtsc();
923                 cur_tsc_power = cur_tsc;
924
925                 /*
926                  * TX burst queue drain
927                  */
928                 diff_tsc = cur_tsc - prev_tsc;
929                 if (unlikely(diff_tsc > drain_tsc)) {
930                         for (i = 0; i < qconf->n_tx_port; ++i) {
931                                 portid = qconf->tx_port_id[i];
932                                 rte_eth_tx_buffer_flush(portid,
933                                                 qconf->tx_queue_id[portid],
934                                                 qconf->tx_buffer[portid]);
935                         }
936                         prev_tsc = cur_tsc;
937                 }
938
939                 diff_tsc_power = cur_tsc_power - prev_tsc_power;
940                 if (diff_tsc_power > TIMER_RESOLUTION_CYCLES) {
941                         rte_timer_manage();
942                         prev_tsc_power = cur_tsc_power;
943                 }
944
945 start_rx:
946                 /*
947                  * Read packet from RX queues
948                  */
949                 lcore_scaleup_hint = FREQ_CURRENT;
950                 lcore_rx_idle_count = 0;
951                 for (i = 0; i < qconf->n_rx_queue; ++i) {
952                         rx_queue = &(qconf->rx_queue_list[i]);
953                         rx_queue->idle_hint = 0;
954                         portid = rx_queue->port_id;
955                         queueid = rx_queue->queue_id;
956
957                         nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
958                                                                 MAX_PKT_BURST);
959
960                         stats[lcore_id].nb_rx_processed += nb_rx;
961                         if (unlikely(nb_rx == 0)) {
962                                 /**
963                                  * no packet received from rx queue, try to
964                                  * sleep for a while forcing CPU enter deeper
965                                  * C states.
966                                  */
967                                 rx_queue->zero_rx_packet_count++;
968
969                                 if (rx_queue->zero_rx_packet_count <=
970                                                         MIN_ZERO_POLL_COUNT)
971                                         continue;
972
973                                 rx_queue->idle_hint = power_idle_heuristic(\
974                                         rx_queue->zero_rx_packet_count);
975                                 lcore_rx_idle_count++;
976                         } else {
977                                 rx_queue->zero_rx_packet_count = 0;
978
979                                 /**
980                                  * do not scale up frequency immediately as
981                                  * user to kernel space communication is costly
982                                  * which might impact packet I/O for received
983                                  * packets.
984                                  */
985                                 rx_queue->freq_up_hint =
986                                         power_freq_scaleup_heuristic(lcore_id,
987                                                         portid, queueid);
988                         }
989
990                         /* Prefetch first packets */
991                         for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) {
992                                 rte_prefetch0(rte_pktmbuf_mtod(
993                                                 pkts_burst[j], void *));
994                         }
995
996                         /* Prefetch and forward already prefetched packets */
997                         for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) {
998                                 rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[
999                                                 j + PREFETCH_OFFSET], void *));
1000                                 l3fwd_simple_forward(pkts_burst[j], portid,
1001                                                                 qconf);
1002                         }
1003
1004                         /* Forward remaining prefetched packets */
1005                         for (; j < nb_rx; j++) {
1006                                 l3fwd_simple_forward(pkts_burst[j], portid,
1007                                                                 qconf);
1008                         }
1009                 }
1010
1011                 if (likely(lcore_rx_idle_count != qconf->n_rx_queue)) {
1012                         for (i = 1, lcore_scaleup_hint =
1013                                 qconf->rx_queue_list[0].freq_up_hint;
1014                                         i < qconf->n_rx_queue; ++i) {
1015                                 rx_queue = &(qconf->rx_queue_list[i]);
1016                                 if (rx_queue->freq_up_hint >
1017                                                 lcore_scaleup_hint)
1018                                         lcore_scaleup_hint =
1019                                                 rx_queue->freq_up_hint;
1020                         }
1021
1022                         if (lcore_scaleup_hint == FREQ_HIGHEST) {
1023                                 if (rte_power_freq_max)
1024                                         rte_power_freq_max(lcore_id);
1025                         } else if (lcore_scaleup_hint == FREQ_HIGHER) {
1026                                 if (rte_power_freq_up)
1027                                         rte_power_freq_up(lcore_id);
1028                         }
1029                 } else {
1030                         /**
1031                          * All Rx queues empty in recent consecutive polls,
1032                          * sleep in a conservative manner, meaning sleep as
1033                          * less as possible.
1034                          */
1035                         for (i = 1, lcore_idle_hint =
1036                                 qconf->rx_queue_list[0].idle_hint;
1037                                         i < qconf->n_rx_queue; ++i) {
1038                                 rx_queue = &(qconf->rx_queue_list[i]);
1039                                 if (rx_queue->idle_hint < lcore_idle_hint)
1040                                         lcore_idle_hint = rx_queue->idle_hint;
1041                         }
1042
1043                         if (lcore_idle_hint < SUSPEND_THRESHOLD)
1044                                 /**
1045                                  * execute "pause" instruction to avoid context
1046                                  * switch which generally take hundred of
1047                                  * microseconds for short sleep.
1048                                  */
1049                                 rte_delay_us(lcore_idle_hint);
1050                         else {
1051                                 /* suspend until rx interrupt trigges */
1052                                 if (intr_en) {
1053                                         turn_on_intr(qconf);
1054                                         sleep_until_rx_interrupt(
1055                                                 qconf->n_rx_queue);
1056                                 }
1057                                 /* start receiving packets immediately */
1058                                 goto start_rx;
1059                         }
1060                         stats[lcore_id].sleep_time += lcore_idle_hint;
1061                 }
1062         }
1063 }
1064
1065 static int
1066 check_lcore_params(void)
1067 {
1068         uint8_t queue, lcore;
1069         uint16_t i;
1070         int socketid;
1071
1072         for (i = 0; i < nb_lcore_params; ++i) {
1073                 queue = lcore_params[i].queue_id;
1074                 if (queue >= MAX_RX_QUEUE_PER_PORT) {
1075                         printf("invalid queue number: %hhu\n", queue);
1076                         return -1;
1077                 }
1078                 lcore = lcore_params[i].lcore_id;
1079                 if (!rte_lcore_is_enabled(lcore)) {
1080                         printf("error: lcore %hhu is not enabled in lcore "
1081                                                         "mask\n", lcore);
1082                         return -1;
1083                 }
1084                 if ((socketid = rte_lcore_to_socket_id(lcore) != 0) &&
1085                                                         (numa_on == 0)) {
1086                         printf("warning: lcore %hhu is on socket %d with numa "
1087                                                 "off\n", lcore, socketid);
1088                 }
1089         }
1090         return 0;
1091 }
1092
1093 static int
1094 check_port_config(const unsigned nb_ports)
1095 {
1096         unsigned portid;
1097         uint16_t i;
1098
1099         for (i = 0; i < nb_lcore_params; ++i) {
1100                 portid = lcore_params[i].port_id;
1101                 if ((enabled_port_mask & (1 << portid)) == 0) {
1102                         printf("port %u is not enabled in port mask\n",
1103                                                                 portid);
1104                         return -1;
1105                 }
1106                 if (portid >= nb_ports) {
1107                         printf("port %u is not present on the board\n",
1108                                                                 portid);
1109                         return -1;
1110                 }
1111         }
1112         return 0;
1113 }
1114
1115 static uint8_t
1116 get_port_n_rx_queues(const uint8_t port)
1117 {
1118         int queue = -1;
1119         uint16_t i;
1120
1121         for (i = 0; i < nb_lcore_params; ++i) {
1122                 if (lcore_params[i].port_id == port &&
1123                                 lcore_params[i].queue_id > queue)
1124                         queue = lcore_params[i].queue_id;
1125         }
1126         return (uint8_t)(++queue);
1127 }
1128
1129 static int
1130 init_lcore_rx_queues(void)
1131 {
1132         uint16_t i, nb_rx_queue;
1133         uint8_t lcore;
1134
1135         for (i = 0; i < nb_lcore_params; ++i) {
1136                 lcore = lcore_params[i].lcore_id;
1137                 nb_rx_queue = lcore_conf[lcore].n_rx_queue;
1138                 if (nb_rx_queue >= MAX_RX_QUEUE_PER_LCORE) {
1139                         printf("error: too many queues (%u) for lcore: %u\n",
1140                                 (unsigned)nb_rx_queue + 1, (unsigned)lcore);
1141                         return -1;
1142                 } else {
1143                         lcore_conf[lcore].rx_queue_list[nb_rx_queue].port_id =
1144                                 lcore_params[i].port_id;
1145                         lcore_conf[lcore].rx_queue_list[nb_rx_queue].queue_id =
1146                                 lcore_params[i].queue_id;
1147                         lcore_conf[lcore].n_rx_queue++;
1148                 }
1149         }
1150         return 0;
1151 }
1152
1153 /* display usage */
1154 static void
1155 print_usage(const char *prgname)
1156 {
1157         printf ("%s [EAL options] -- -p PORTMASK -P"
1158                 "  [--config (port,queue,lcore)[,(port,queue,lcore]]"
1159                 "  [--enable-jumbo [--max-pkt-len PKTLEN]]\n"
1160                 "  -p PORTMASK: hexadecimal bitmask of ports to configure\n"
1161                 "  -P : enable promiscuous mode\n"
1162                 "  --config (port,queue,lcore): rx queues configuration\n"
1163                 "  --no-numa: optional, disable numa awareness\n"
1164                 "  --enable-jumbo: enable jumbo frame"
1165                 " which max packet len is PKTLEN in decimal (64-9600)\n"
1166                 "  --parse-ptype: parse packet type by software\n",
1167                 prgname);
1168 }
1169
1170 static int parse_max_pkt_len(const char *pktlen)
1171 {
1172         char *end = NULL;
1173         unsigned long len;
1174
1175         /* parse decimal string */
1176         len = strtoul(pktlen, &end, 10);
1177         if ((pktlen[0] == '\0') || (end == NULL) || (*end != '\0'))
1178                 return -1;
1179
1180         if (len == 0)
1181                 return -1;
1182
1183         return len;
1184 }
1185
1186 static int
1187 parse_portmask(const char *portmask)
1188 {
1189         char *end = NULL;
1190         unsigned long pm;
1191
1192         /* parse hexadecimal string */
1193         pm = strtoul(portmask, &end, 16);
1194         if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
1195                 return -1;
1196
1197         if (pm == 0)
1198                 return -1;
1199
1200         return pm;
1201 }
1202
1203 static int
1204 parse_config(const char *q_arg)
1205 {
1206         char s[256];
1207         const char *p, *p0 = q_arg;
1208         char *end;
1209         enum fieldnames {
1210                 FLD_PORT = 0,
1211                 FLD_QUEUE,
1212                 FLD_LCORE,
1213                 _NUM_FLD
1214         };
1215         unsigned long int_fld[_NUM_FLD];
1216         char *str_fld[_NUM_FLD];
1217         int i;
1218         unsigned size;
1219
1220         nb_lcore_params = 0;
1221
1222         while ((p = strchr(p0,'(')) != NULL) {
1223                 ++p;
1224                 if((p0 = strchr(p,')')) == NULL)
1225                         return -1;
1226
1227                 size = p0 - p;
1228                 if(size >= sizeof(s))
1229                         return -1;
1230
1231                 snprintf(s, sizeof(s), "%.*s", size, p);
1232                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') !=
1233                                                                 _NUM_FLD)
1234                         return -1;
1235                 for (i = 0; i < _NUM_FLD; i++){
1236                         errno = 0;
1237                         int_fld[i] = strtoul(str_fld[i], &end, 0);
1238                         if (errno != 0 || end == str_fld[i] || int_fld[i] >
1239                                                                         255)
1240                                 return -1;
1241                 }
1242                 if (nb_lcore_params >= MAX_LCORE_PARAMS) {
1243                         printf("exceeded max number of lcore params: %hu\n",
1244                                 nb_lcore_params);
1245                         return -1;
1246                 }
1247                 lcore_params_array[nb_lcore_params].port_id =
1248                                 (uint8_t)int_fld[FLD_PORT];
1249                 lcore_params_array[nb_lcore_params].queue_id =
1250                                 (uint8_t)int_fld[FLD_QUEUE];
1251                 lcore_params_array[nb_lcore_params].lcore_id =
1252                                 (uint8_t)int_fld[FLD_LCORE];
1253                 ++nb_lcore_params;
1254         }
1255         lcore_params = lcore_params_array;
1256
1257         return 0;
1258 }
1259
1260 #define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
1261
1262 /* Parse the argument given in the command line of the application */
1263 static int
1264 parse_args(int argc, char **argv)
1265 {
1266         int opt, ret;
1267         char **argvopt;
1268         int option_index;
1269         char *prgname = argv[0];
1270         static struct option lgopts[] = {
1271                 {"config", 1, 0, 0},
1272                 {"no-numa", 0, 0, 0},
1273                 {"enable-jumbo", 0, 0, 0},
1274                 {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, 0},
1275                 {NULL, 0, 0, 0}
1276         };
1277
1278         argvopt = argv;
1279
1280         while ((opt = getopt_long(argc, argvopt, "p:P",
1281                                 lgopts, &option_index)) != EOF) {
1282
1283                 switch (opt) {
1284                 /* portmask */
1285                 case 'p':
1286                         enabled_port_mask = parse_portmask(optarg);
1287                         if (enabled_port_mask == 0) {
1288                                 printf("invalid portmask\n");
1289                                 print_usage(prgname);
1290                                 return -1;
1291                         }
1292                         break;
1293                 case 'P':
1294                         printf("Promiscuous mode selected\n");
1295                         promiscuous_on = 1;
1296                         break;
1297
1298                 /* long options */
1299                 case 0:
1300                         if (!strncmp(lgopts[option_index].name, "config", 6)) {
1301                                 ret = parse_config(optarg);
1302                                 if (ret) {
1303                                         printf("invalid config\n");
1304                                         print_usage(prgname);
1305                                         return -1;
1306                                 }
1307                         }
1308
1309                         if (!strncmp(lgopts[option_index].name,
1310                                                 "no-numa", 7)) {
1311                                 printf("numa is disabled \n");
1312                                 numa_on = 0;
1313                         }
1314
1315                         if (!strncmp(lgopts[option_index].name,
1316                                         "enable-jumbo", 12)) {
1317                                 struct option lenopts =
1318                                         {"max-pkt-len", required_argument, \
1319                                                                         0, 0};
1320
1321                                 printf("jumbo frame is enabled \n");
1322                                 port_conf.rxmode.jumbo_frame = 1;
1323
1324                                 /**
1325                                  * if no max-pkt-len set, use the default value
1326                                  * ETHER_MAX_LEN
1327                                  */
1328                                 if (0 == getopt_long(argc, argvopt, "",
1329                                                 &lenopts, &option_index)) {
1330                                         ret = parse_max_pkt_len(optarg);
1331                                         if ((ret < 64) ||
1332                                                 (ret > MAX_JUMBO_PKT_LEN)){
1333                                                 printf("invalid packet "
1334                                                                 "length\n");
1335                                                 print_usage(prgname);
1336                                                 return -1;
1337                                         }
1338                                         port_conf.rxmode.max_rx_pkt_len = ret;
1339                                 }
1340                                 printf("set jumbo frame "
1341                                         "max packet length to %u\n",
1342                                 (unsigned int)port_conf.rxmode.max_rx_pkt_len);
1343                         }
1344
1345                         if (!strncmp(lgopts[option_index].name,
1346                                      CMD_LINE_OPT_PARSE_PTYPE,
1347                                      sizeof(CMD_LINE_OPT_PARSE_PTYPE))) {
1348                                 printf("soft parse-ptype is enabled\n");
1349                                 parse_ptype = 1;
1350                         }
1351
1352                         break;
1353
1354                 default:
1355                         print_usage(prgname);
1356                         return -1;
1357                 }
1358         }
1359
1360         if (optind >= 0)
1361                 argv[optind-1] = prgname;
1362
1363         ret = optind-1;
1364         optind = 1; /* reset getopt lib */
1365         return ret;
1366 }
1367
1368 static void
1369 print_ethaddr(const char *name, const struct ether_addr *eth_addr)
1370 {
1371         char buf[ETHER_ADDR_FMT_SIZE];
1372         ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
1373         printf("%s%s", name, buf);
1374 }
1375
1376 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
1377 static void
1378 setup_hash(int socketid)
1379 {
1380         struct rte_hash_parameters ipv4_l3fwd_hash_params = {
1381                 .name = NULL,
1382                 .entries = L3FWD_HASH_ENTRIES,
1383                 .key_len = sizeof(struct ipv4_5tuple),
1384                 .hash_func = DEFAULT_HASH_FUNC,
1385                 .hash_func_init_val = 0,
1386         };
1387
1388         struct rte_hash_parameters ipv6_l3fwd_hash_params = {
1389                 .name = NULL,
1390                 .entries = L3FWD_HASH_ENTRIES,
1391                 .key_len = sizeof(struct ipv6_5tuple),
1392                 .hash_func = DEFAULT_HASH_FUNC,
1393                 .hash_func_init_val = 0,
1394         };
1395
1396         unsigned i;
1397         int ret;
1398         char s[64];
1399
1400         /* create ipv4 hash */
1401         snprintf(s, sizeof(s), "ipv4_l3fwd_hash_%d", socketid);
1402         ipv4_l3fwd_hash_params.name = s;
1403         ipv4_l3fwd_hash_params.socket_id = socketid;
1404         ipv4_l3fwd_lookup_struct[socketid] =
1405                 rte_hash_create(&ipv4_l3fwd_hash_params);
1406         if (ipv4_l3fwd_lookup_struct[socketid] == NULL)
1407                 rte_exit(EXIT_FAILURE, "Unable to create the l3fwd hash on "
1408                                 "socket %d\n", socketid);
1409
1410         /* create ipv6 hash */
1411         snprintf(s, sizeof(s), "ipv6_l3fwd_hash_%d", socketid);
1412         ipv6_l3fwd_hash_params.name = s;
1413         ipv6_l3fwd_hash_params.socket_id = socketid;
1414         ipv6_l3fwd_lookup_struct[socketid] =
1415                 rte_hash_create(&ipv6_l3fwd_hash_params);
1416         if (ipv6_l3fwd_lookup_struct[socketid] == NULL)
1417                 rte_exit(EXIT_FAILURE, "Unable to create the l3fwd hash on "
1418                                 "socket %d\n", socketid);
1419
1420
1421         /* populate the ipv4 hash */
1422         for (i = 0; i < IPV4_L3FWD_NUM_ROUTES; i++) {
1423                 ret = rte_hash_add_key (ipv4_l3fwd_lookup_struct[socketid],
1424                                 (void *) &ipv4_l3fwd_route_array[i].key);
1425                 if (ret < 0) {
1426                         rte_exit(EXIT_FAILURE, "Unable to add entry %u to the"
1427                                 "l3fwd hash on socket %d\n", i, socketid);
1428                 }
1429                 ipv4_l3fwd_out_if[ret] = ipv4_l3fwd_route_array[i].if_out;
1430                 printf("Hash: Adding key\n");
1431                 print_ipv4_key(ipv4_l3fwd_route_array[i].key);
1432         }
1433
1434         /* populate the ipv6 hash */
1435         for (i = 0; i < IPV6_L3FWD_NUM_ROUTES; i++) {
1436                 ret = rte_hash_add_key (ipv6_l3fwd_lookup_struct[socketid],
1437                                 (void *) &ipv6_l3fwd_route_array[i].key);
1438                 if (ret < 0) {
1439                         rte_exit(EXIT_FAILURE, "Unable to add entry %u to the"
1440                                 "l3fwd hash on socket %d\n", i, socketid);
1441                 }
1442                 ipv6_l3fwd_out_if[ret] = ipv6_l3fwd_route_array[i].if_out;
1443                 printf("Hash: Adding key\n");
1444                 print_ipv6_key(ipv6_l3fwd_route_array[i].key);
1445         }
1446 }
1447 #endif
1448
1449 #if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
1450 static void
1451 setup_lpm(int socketid)
1452 {
1453         unsigned i;
1454         int ret;
1455         char s[64];
1456
1457         /* create the LPM table */
1458         struct rte_lpm_config lpm_ipv4_config;
1459
1460         lpm_ipv4_config.max_rules = IPV4_L3FWD_LPM_MAX_RULES;
1461         lpm_ipv4_config.number_tbl8s = 256;
1462         lpm_ipv4_config.flags = 0;
1463
1464         snprintf(s, sizeof(s), "IPV4_L3FWD_LPM_%d", socketid);
1465         ipv4_l3fwd_lookup_struct[socketid] =
1466                         rte_lpm_create(s, socketid, &lpm_ipv4_config);
1467         if (ipv4_l3fwd_lookup_struct[socketid] == NULL)
1468                 rte_exit(EXIT_FAILURE, "Unable to create the l3fwd LPM table"
1469                                 " on socket %d\n", socketid);
1470
1471         /* populate the LPM table */
1472         for (i = 0; i < IPV4_L3FWD_NUM_ROUTES; i++) {
1473                 ret = rte_lpm_add(ipv4_l3fwd_lookup_struct[socketid],
1474                         ipv4_l3fwd_route_array[i].ip,
1475                         ipv4_l3fwd_route_array[i].depth,
1476                         ipv4_l3fwd_route_array[i].if_out);
1477
1478                 if (ret < 0) {
1479                         rte_exit(EXIT_FAILURE, "Unable to add entry %u to the "
1480                                 "l3fwd LPM table on socket %d\n",
1481                                 i, socketid);
1482                 }
1483
1484                 printf("LPM: Adding route 0x%08x / %d (%d)\n",
1485                         (unsigned)ipv4_l3fwd_route_array[i].ip,
1486                         ipv4_l3fwd_route_array[i].depth,
1487                         ipv4_l3fwd_route_array[i].if_out);
1488         }
1489 }
1490 #endif
1491
1492 static int
1493 init_mem(unsigned nb_mbuf)
1494 {
1495         struct lcore_conf *qconf;
1496         int socketid;
1497         unsigned lcore_id;
1498         char s[64];
1499
1500         for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
1501                 if (rte_lcore_is_enabled(lcore_id) == 0)
1502                         continue;
1503
1504                 if (numa_on)
1505                         socketid = rte_lcore_to_socket_id(lcore_id);
1506                 else
1507                         socketid = 0;
1508
1509                 if (socketid >= NB_SOCKETS) {
1510                         rte_exit(EXIT_FAILURE, "Socket %d of lcore %u is "
1511                                         "out of range %d\n", socketid,
1512                                                 lcore_id, NB_SOCKETS);
1513                 }
1514                 if (pktmbuf_pool[socketid] == NULL) {
1515                         snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
1516                         pktmbuf_pool[socketid] =
1517                                 rte_pktmbuf_pool_create(s, nb_mbuf,
1518                                         MEMPOOL_CACHE_SIZE, 0,
1519                                         RTE_MBUF_DEFAULT_BUF_SIZE,
1520                                         socketid);
1521                         if (pktmbuf_pool[socketid] == NULL)
1522                                 rte_exit(EXIT_FAILURE,
1523                                         "Cannot init mbuf pool on socket %d\n",
1524                                                                 socketid);
1525                         else
1526                                 printf("Allocated mbuf pool on socket %d\n",
1527                                                                 socketid);
1528
1529 #if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
1530                         setup_lpm(socketid);
1531 #else
1532                         setup_hash(socketid);
1533 #endif
1534                 }
1535                 qconf = &lcore_conf[lcore_id];
1536                 qconf->ipv4_lookup_struct = ipv4_l3fwd_lookup_struct[socketid];
1537 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
1538                 qconf->ipv6_lookup_struct = ipv6_l3fwd_lookup_struct[socketid];
1539 #endif
1540         }
1541         return 0;
1542 }
1543
1544 /* Check the link status of all ports in up to 9s, and print them finally */
1545 static void
1546 check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
1547 {
1548 #define CHECK_INTERVAL 100 /* 100ms */
1549 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
1550         uint8_t portid, count, all_ports_up, print_flag = 0;
1551         struct rte_eth_link link;
1552
1553         printf("\nChecking link status");
1554         fflush(stdout);
1555         for (count = 0; count <= MAX_CHECK_TIME; count++) {
1556                 all_ports_up = 1;
1557                 for (portid = 0; portid < port_num; portid++) {
1558                         if ((port_mask & (1 << portid)) == 0)
1559                                 continue;
1560                         memset(&link, 0, sizeof(link));
1561                         rte_eth_link_get_nowait(portid, &link);
1562                         /* print link status if flag set */
1563                         if (print_flag == 1) {
1564                                 if (link.link_status)
1565                                         printf("Port %d Link Up - speed %u "
1566                                                 "Mbps - %s\n", (uint8_t)portid,
1567                                                 (unsigned)link.link_speed,
1568                                 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
1569                                         ("full-duplex") : ("half-duplex\n"));
1570                                 else
1571                                         printf("Port %d Link Down\n",
1572                                                 (uint8_t)portid);
1573                                 continue;
1574                         }
1575                         /* clear all_ports_up flag if any link down */
1576                         if (link.link_status == ETH_LINK_DOWN) {
1577                                 all_ports_up = 0;
1578                                 break;
1579                         }
1580                 }
1581                 /* after finally printing all link status, get out */
1582                 if (print_flag == 1)
1583                         break;
1584
1585                 if (all_ports_up == 0) {
1586                         printf(".");
1587                         fflush(stdout);
1588                         rte_delay_ms(CHECK_INTERVAL);
1589                 }
1590
1591                 /* set the print_flag if all ports up or timeout */
1592                 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
1593                         print_flag = 1;
1594                         printf("done\n");
1595                 }
1596         }
1597 }
1598
1599 static int check_ptype(uint8_t portid)
1600 {
1601         int i, ret;
1602         int ptype_l3_ipv4 = 0;
1603 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
1604         int ptype_l3_ipv6 = 0;
1605 #endif
1606         uint32_t ptype_mask = RTE_PTYPE_L3_MASK;
1607
1608         ret = rte_eth_dev_get_supported_ptypes(portid, ptype_mask, NULL, 0);
1609         if (ret <= 0)
1610                 return 0;
1611
1612         uint32_t ptypes[ret];
1613
1614         ret = rte_eth_dev_get_supported_ptypes(portid, ptype_mask, ptypes, ret);
1615         for (i = 0; i < ret; ++i) {
1616                 if (ptypes[i] & RTE_PTYPE_L3_IPV4)
1617                         ptype_l3_ipv4 = 1;
1618 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
1619                 if (ptypes[i] & RTE_PTYPE_L3_IPV6)
1620                         ptype_l3_ipv6 = 1;
1621 #endif
1622         }
1623
1624         if (ptype_l3_ipv4 == 0)
1625                 printf("port %d cannot parse RTE_PTYPE_L3_IPV4\n", portid);
1626
1627 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
1628         if (ptype_l3_ipv6 == 0)
1629                 printf("port %d cannot parse RTE_PTYPE_L3_IPV6\n", portid);
1630 #endif
1631
1632 #if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
1633         if (ptype_l3_ipv4)
1634 #else /* APP_LOOKUP_EXACT_MATCH */
1635         if (ptype_l3_ipv4 && ptype_l3_ipv6)
1636 #endif
1637                 return 1;
1638
1639         return 0;
1640
1641 }
1642
1643 int
1644 main(int argc, char **argv)
1645 {
1646         struct lcore_conf *qconf;
1647         struct rte_eth_dev_info dev_info;
1648         struct rte_eth_txconf *txconf;
1649         int ret;
1650         unsigned nb_ports;
1651         uint16_t queueid;
1652         unsigned lcore_id;
1653         uint64_t hz;
1654         uint32_t n_tx_queue, nb_lcores;
1655         uint32_t dev_rxq_num, dev_txq_num;
1656         uint8_t portid, nb_rx_queue, queue, socketid;
1657         uint16_t org_rxq_intr = port_conf.intr_conf.rxq;
1658
1659         /* catch SIGINT and restore cpufreq governor to ondemand */
1660         signal(SIGINT, signal_exit_now);
1661
1662         /* init EAL */
1663         ret = rte_eal_init(argc, argv);
1664         if (ret < 0)
1665                 rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
1666         argc -= ret;
1667         argv += ret;
1668
1669         /* init RTE timer library to be used late */
1670         rte_timer_subsystem_init();
1671
1672         /* parse application arguments (after the EAL ones) */
1673         ret = parse_args(argc, argv);
1674         if (ret < 0)
1675                 rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
1676
1677         if (check_lcore_params() < 0)
1678                 rte_exit(EXIT_FAILURE, "check_lcore_params failed\n");
1679
1680         ret = init_lcore_rx_queues();
1681         if (ret < 0)
1682                 rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
1683
1684         nb_ports = rte_eth_dev_count();
1685
1686         if (check_port_config(nb_ports) < 0)
1687                 rte_exit(EXIT_FAILURE, "check_port_config failed\n");
1688
1689         nb_lcores = rte_lcore_count();
1690
1691         /* initialize all ports */
1692         for (portid = 0; portid < nb_ports; portid++) {
1693                 /* skip ports that are not enabled */
1694                 if ((enabled_port_mask & (1 << portid)) == 0) {
1695                         printf("\nSkipping disabled port %d\n", portid);
1696                         continue;
1697                 }
1698
1699                 /* init port */
1700                 printf("Initializing port %d ... ", portid );
1701                 fflush(stdout);
1702
1703                 rte_eth_dev_info_get(portid, &dev_info);
1704                 dev_rxq_num = dev_info.max_rx_queues;
1705                 dev_txq_num = dev_info.max_tx_queues;
1706
1707                 nb_rx_queue = get_port_n_rx_queues(portid);
1708                 if (nb_rx_queue > dev_rxq_num)
1709                         rte_exit(EXIT_FAILURE,
1710                                 "Cannot configure not existed rxq: "
1711                                 "port=%d\n", portid);
1712
1713                 n_tx_queue = nb_lcores;
1714                 if (n_tx_queue > dev_txq_num)
1715                         n_tx_queue = dev_txq_num;
1716                 printf("Creating queues: nb_rxq=%d nb_txq=%u... ",
1717                         nb_rx_queue, (unsigned)n_tx_queue );
1718                 /* If number of Rx queue is 0, no need to enable Rx interrupt */
1719                 if (nb_rx_queue == 0)
1720                         port_conf.intr_conf.rxq = 0;
1721                 ret = rte_eth_dev_configure(portid, nb_rx_queue,
1722                                         (uint16_t)n_tx_queue, &port_conf);
1723                 /* Revert to original value */
1724                 port_conf.intr_conf.rxq = org_rxq_intr;
1725                 if (ret < 0)
1726                         rte_exit(EXIT_FAILURE, "Cannot configure device: "
1727                                         "err=%d, port=%d\n", ret, portid);
1728
1729                 rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
1730                 print_ethaddr(" Address:", &ports_eth_addr[portid]);
1731                 printf(", ");
1732
1733                 /* init memory */
1734                 ret = init_mem(NB_MBUF);
1735                 if (ret < 0)
1736                         rte_exit(EXIT_FAILURE, "init_mem failed\n");
1737
1738                 for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
1739                         if (rte_lcore_is_enabled(lcore_id) == 0)
1740                                 continue;
1741
1742                         /* Initialize TX buffers */
1743                         qconf = &lcore_conf[lcore_id];
1744                         qconf->tx_buffer[portid] = rte_zmalloc_socket("tx_buffer",
1745                                 RTE_ETH_TX_BUFFER_SIZE(MAX_PKT_BURST), 0,
1746                                 rte_eth_dev_socket_id(portid));
1747                         if (qconf->tx_buffer[portid] == NULL)
1748                                 rte_exit(EXIT_FAILURE, "Can't allocate tx buffer for port %u\n",
1749                                                 (unsigned) portid);
1750
1751                         rte_eth_tx_buffer_init(qconf->tx_buffer[portid], MAX_PKT_BURST);
1752                 }
1753
1754                 /* init one TX queue per couple (lcore,port) */
1755                 queueid = 0;
1756                 for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
1757                         if (rte_lcore_is_enabled(lcore_id) == 0)
1758                                 continue;
1759
1760                         if (queueid >= dev_txq_num)
1761                                 continue;
1762
1763                         if (numa_on)
1764                                 socketid = \
1765                                 (uint8_t)rte_lcore_to_socket_id(lcore_id);
1766                         else
1767                                 socketid = 0;
1768
1769                         printf("txq=%u,%d,%d ", lcore_id, queueid, socketid);
1770                         fflush(stdout);
1771
1772                         rte_eth_dev_info_get(portid, &dev_info);
1773                         txconf = &dev_info.default_txconf;
1774                         if (port_conf.rxmode.jumbo_frame)
1775                                 txconf->txq_flags = 0;
1776                         ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
1777                                                      socketid, txconf);
1778                         if (ret < 0)
1779                                 rte_exit(EXIT_FAILURE,
1780                                         "rte_eth_tx_queue_setup: err=%d, "
1781                                                 "port=%d\n", ret, portid);
1782
1783                         qconf = &lcore_conf[lcore_id];
1784                         qconf->tx_queue_id[portid] = queueid;
1785                         queueid++;
1786
1787                         qconf->tx_port_id[qconf->n_tx_port] = portid;
1788                         qconf->n_tx_port++;
1789                 }
1790                 printf("\n");
1791         }
1792
1793         for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
1794                 if (rte_lcore_is_enabled(lcore_id) == 0)
1795                         continue;
1796
1797                 /* init power management library */
1798                 ret = rte_power_init(lcore_id);
1799                 if (ret)
1800                         RTE_LOG(ERR, POWER,
1801                                 "Library initialization failed on core %u\n", lcore_id);
1802
1803                 /* init timer structures for each enabled lcore */
1804                 rte_timer_init(&power_timers[lcore_id]);
1805                 hz = rte_get_timer_hz();
1806                 rte_timer_reset(&power_timers[lcore_id],
1807                         hz/TIMER_NUMBER_PER_SECOND, SINGLE, lcore_id,
1808                                                 power_timer_cb, NULL);
1809
1810                 qconf = &lcore_conf[lcore_id];
1811                 printf("\nInitializing rx queues on lcore %u ... ", lcore_id );
1812                 fflush(stdout);
1813                 /* init RX queues */
1814                 for(queue = 0; queue < qconf->n_rx_queue; ++queue) {
1815                         portid = qconf->rx_queue_list[queue].port_id;
1816                         queueid = qconf->rx_queue_list[queue].queue_id;
1817
1818                         if (numa_on)
1819                                 socketid = \
1820                                 (uint8_t)rte_lcore_to_socket_id(lcore_id);
1821                         else
1822                                 socketid = 0;
1823
1824                         printf("rxq=%d,%d,%d ", portid, queueid, socketid);
1825                         fflush(stdout);
1826
1827                         ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
1828                                 socketid, NULL,
1829                                 pktmbuf_pool[socketid]);
1830                         if (ret < 0)
1831                                 rte_exit(EXIT_FAILURE,
1832                                         "rte_eth_rx_queue_setup: err=%d, "
1833                                                 "port=%d\n", ret, portid);
1834
1835                         if (parse_ptype) {
1836                                 if (add_cb_parse_ptype(portid, queueid) < 0)
1837                                         rte_exit(EXIT_FAILURE,
1838                                                  "Fail to add ptype cb\n");
1839                         } else if (!check_ptype(portid))
1840                                 rte_exit(EXIT_FAILURE,
1841                                          "PMD can not provide needed ptypes\n");
1842                 }
1843         }
1844
1845         printf("\n");
1846
1847         /* start ports */
1848         for (portid = 0; portid < nb_ports; portid++) {
1849                 if ((enabled_port_mask & (1 << portid)) == 0) {
1850                         continue;
1851                 }
1852                 /* Start device */
1853                 ret = rte_eth_dev_start(portid);
1854                 if (ret < 0)
1855                         rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, "
1856                                                 "port=%d\n", ret, portid);
1857                 /*
1858                  * If enabled, put device in promiscuous mode.
1859                  * This allows IO forwarding mode to forward packets
1860                  * to itself through 2 cross-connected  ports of the
1861                  * target machine.
1862                  */
1863                 if (promiscuous_on)
1864                         rte_eth_promiscuous_enable(portid);
1865                 /* initialize spinlock for each port */
1866                 rte_spinlock_init(&(locks[portid]));
1867         }
1868
1869         check_all_ports_link_status((uint8_t)nb_ports, enabled_port_mask);
1870
1871         /* launch per-lcore init on every lcore */
1872         rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
1873         RTE_LCORE_FOREACH_SLAVE(lcore_id) {
1874                 if (rte_eal_wait_lcore(lcore_id) < 0)
1875                         return -1;
1876         }
1877
1878         return 0;
1879 }