examples/link_status_interrupt/main.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2010-2016 Intel Corporation
   3  */
   4
   5 #include <stdio.h>
   6 #include <stdlib.h>
   7 #include <string.h>
   8 #include <stdint.h>
   9 #include <inttypes.h>
  10 #include <sys/types.h>
  11 #include <sys/queue.h>
  12 #include <netinet/in.h>
  13 #include <setjmp.h>
  14 #include <stdarg.h>
  15 #include <ctype.h>
  16 #include <errno.h>
  17 #include <getopt.h>
  18
  19 #include <rte_common.h>
  20 #include <rte_log.h>
  21 #include <rte_malloc.h>
  22 #include <rte_memory.h>
  23 #include <rte_memcpy.h>
  24 #include <rte_eal.h>
  25 #include <rte_launch.h>
  26 #include <rte_atomic.h>
  27 #include <rte_cycles.h>
  28 #include <rte_prefetch.h>
  29 #include <rte_lcore.h>
  30 #include <rte_per_lcore.h>
  31 #include <rte_branch_prediction.h>
  32 #include <rte_interrupts.h>
  33 #include <rte_random.h>
  34 #include <rte_debug.h>
  35 #include <rte_ether.h>
  36 #include <rte_ethdev.h>
  37 #include <rte_mempool.h>
  38 #include <rte_mbuf.h>
  39
  40 #define RTE_LOGTYPE_LSI RTE_LOGTYPE_USER1
  41
  42 #define NB_MBUF   8192
  43
  44 #define MAX_PKT_BURST 32
  45 #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
  46
  47 /*
  48  * Configurable number of RX/TX ring descriptors
  49  */
  50 #define RTE_TEST_RX_DESC_DEFAULT 1024
  51 #define RTE_TEST_TX_DESC_DEFAULT 1024
  52 static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
  53 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
  54
  55 /* ethernet addresses of ports */
  56 static struct ether_addr lsi_ports_eth_addr[RTE_MAX_ETHPORTS];
  57
  58 /* mask of enabled ports */
  59 static uint32_t lsi_enabled_port_mask = 0;
  60
  61 static unsigned int lsi_rx_queue_per_lcore = 1;
  62
  63 /* destination port for L2 forwarding */
  64 static unsigned lsi_dst_ports[RTE_MAX_ETHPORTS] = {0};
  65
  66 #define MAX_PKT_BURST 32
  67
  68 #define MAX_RX_QUEUE_PER_LCORE 16
  69 #define MAX_TX_QUEUE_PER_PORT 16
  70 struct lcore_queue_conf {
  71         unsigned n_rx_port;
  72         unsigned rx_port_list[MAX_RX_QUEUE_PER_LCORE];
  73         unsigned tx_queue_id;
  74 } __rte_cache_aligned;
  75 struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
  76
  77 struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
  78
  79 static struct rte_eth_conf port_conf = {
  80         .rxmode = {
  81                 .split_hdr_size = 0,
  82                 .ignore_offload_bitfield = 1,
  83                 .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
  84         },
  85         .txmode = {
  86                 .mq_mode = ETH_MQ_TX_NONE,
  87         },
  88         .intr_conf = {
  89                 .lsc = 1, /**< lsc interrupt feature enabled */
  90         },
  91 };
  92
  93 struct rte_mempool * lsi_pktmbuf_pool = NULL;
  94
  95 /* Per-port statistics struct */
  96 struct lsi_port_statistics {
  97         uint64_t tx;
  98         uint64_t rx;
  99         uint64_t dropped;
 100 } __rte_cache_aligned;
 101 struct lsi_port_statistics port_statistics[RTE_MAX_ETHPORTS];
 102
 103 /* A tsc-based timer responsible for triggering statistics printout */
 104 #define TIMER_MILLISECOND 2000000ULL /* around 1ms at 2 Ghz */
 105 #define MAX_TIMER_PERIOD 86400 /* 1 day max */
 106 static int64_t timer_period = 10 * TIMER_MILLISECOND * 1000; /* default period is 10 seconds */
 107
 108 /* Print out statistics on packets dropped */
 109 static void
 110 print_stats(void)
 111 {
 112         struct rte_eth_link link;
 113         uint64_t total_packets_dropped, total_packets_tx, total_packets_rx;
 114         uint16_t portid;
 115
 116         total_packets_dropped = 0;
 117         total_packets_tx = 0;
 118         total_packets_rx = 0;
 119
 120         const char clr[] = { 27, '[', '2', 'J', '\0' };
 121         const char topLeft[] = { 27, '[', '1', ';', '1', 'H','\0' };
 122
 123                 /* Clear screen and move to top left */
 124         printf("%s%s", clr, topLeft);
 125
 126         printf("\nPort statistics ====================================");
 127
 128         for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
 129                 /* skip ports that are not enabled */
 130                 if ((lsi_enabled_port_mask & (1 << portid)) == 0)
 131                         continue;
 132
 133                 memset(&link, 0, sizeof(link));
 134                 rte_eth_link_get_nowait(portid, &link);
 135                 printf("\nStatistics for port %u ------------------------------"
 136                            "\nLink status: %25s"
 137                            "\nLink speed: %26u"
 138                            "\nLink duplex: %25s"
 139                            "\nPackets sent: %24"PRIu64
 140                            "\nPackets received: %20"PRIu64
 141                            "\nPackets dropped: %21"PRIu64,
 142                            portid,
 143                            (link.link_status ? "Link up" : "Link down"),
 144                            (unsigned)link.link_speed,
 145                            (link.link_duplex == ETH_LINK_FULL_DUPLEX ? \
 146                                         "full-duplex" : "half-duplex"),
 147                            port_statistics[portid].tx,
 148                            port_statistics[portid].rx,
 149                            port_statistics[portid].dropped);
 150
 151                 total_packets_dropped += port_statistics[portid].dropped;
 152                 total_packets_tx += port_statistics[portid].tx;
 153                 total_packets_rx += port_statistics[portid].rx;
 154         }
 155         printf("\nAggregate statistics ==============================="
 156                    "\nTotal packets sent: %18"PRIu64
 157                    "\nTotal packets received: %14"PRIu64
 158                    "\nTotal packets dropped: %15"PRIu64,
 159                    total_packets_tx,
 160                    total_packets_rx,
 161                    total_packets_dropped);
 162         printf("\n====================================================\n");
 163 }
 164
 165 static void
 166 lsi_simple_forward(struct rte_mbuf *m, unsigned portid)
 167 {
 168         struct ether_hdr *eth;
 169         void *tmp;
 170         unsigned dst_port = lsi_dst_ports[portid];
 171         int sent;
 172         struct rte_eth_dev_tx_buffer *buffer;
 173
 174         eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
 175
 176         /* 02:00:00:00:00:xx */
 177         tmp = &eth->d_addr.addr_bytes[0];
 178         *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
 179
 180         /* src addr */
 181         ether_addr_copy(&lsi_ports_eth_addr[dst_port], &eth->s_addr);
 182
 183         buffer = tx_buffer[dst_port];
 184         sent = rte_eth_tx_buffer(dst_port, 0, buffer, m);
 185         if (sent)
 186                 port_statistics[dst_port].tx += sent;
 187 }
 188
 189 /* main processing loop */
 190 static void
 191 lsi_main_loop(void)
 192 {
 193         struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
 194         struct rte_mbuf *m;
 195         unsigned lcore_id;
 196         unsigned sent;
 197         uint64_t prev_tsc, diff_tsc, cur_tsc, timer_tsc;
 198         unsigned i, j, portid, nb_rx;
 199         struct lcore_queue_conf *qconf;
 200         const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S *
 201                         BURST_TX_DRAIN_US;
 202         struct rte_eth_dev_tx_buffer *buffer;
 203
 204         prev_tsc = 0;
 205         timer_tsc = 0;
 206
 207         lcore_id = rte_lcore_id();
 208         qconf = &lcore_queue_conf[lcore_id];
 209
 210         if (qconf->n_rx_port == 0) {
 211                 RTE_LOG(INFO, LSI, "lcore %u has nothing to do\n", lcore_id);
 212                 return;
 213         }
 214
 215         RTE_LOG(INFO, LSI, "entering main loop on lcore %u\n", lcore_id);
 216
 217         for (i = 0; i < qconf->n_rx_port; i++) {
 218
 219                 portid = qconf->rx_port_list[i];
 220                 RTE_LOG(INFO, LSI, " -- lcoreid=%u portid=%u\n", lcore_id,
 221                         portid);
 222         }
 223
 224         while (1) {
 225
 226                 cur_tsc = rte_rdtsc();
 227
 228                 /*
 229                  * TX burst queue drain
 230                  */
 231                 diff_tsc = cur_tsc - prev_tsc;
 232                 if (unlikely(diff_tsc > drain_tsc)) {
 233
 234                         for (i = 0; i < qconf->n_rx_port; i++) {
 235
 236                                 portid = lsi_dst_ports[qconf->rx_port_list[i]];
 237                                 buffer = tx_buffer[portid];
 238
 239                                 sent = rte_eth_tx_buffer_flush(portid, 0, buffer);
 240                                 if (sent)
 241                                         port_statistics[portid].tx += sent;
 242
 243                         }
 244
 245                         /* if timer is enabled */
 246                         if (timer_period > 0) {
 247
 248                                 /* advance the timer */
 249                                 timer_tsc += diff_tsc;
 250
 251                                 /* if timer has reached its timeout */
 252                                 if (unlikely(timer_tsc >= (uint64_t) timer_period)) {
 253
 254                                         /* do this only on master core */
 255                                         if (lcore_id == rte_get_master_lcore()) {
 256                                                 print_stats();
 257                                                 /* reset the timer */
 258                                                 timer_tsc = 0;
 259                                         }
 260                                 }
 261                         }
 262
 263                         prev_tsc = cur_tsc;
 264                 }
 265
 266                 /*
 267                  * Read packet from RX queues
 268                  */
 269                 for (i = 0; i < qconf->n_rx_port; i++) {
 270
 271                         portid = qconf->rx_port_list[i];
 272                         nb_rx = rte_eth_rx_burst((uint8_t) portid, 0,
 273                                                  pkts_burst, MAX_PKT_BURST);
 274
 275                         port_statistics[portid].rx += nb_rx;
 276
 277                         for (j = 0; j < nb_rx; j++) {
 278                                 m = pkts_burst[j];
 279                                 rte_prefetch0(rte_pktmbuf_mtod(m, void *));
 280                                 lsi_simple_forward(m, portid);
 281                         }
 282                 }
 283         }
 284 }
 285
 286 static int
 287 lsi_launch_one_lcore(__attribute__((unused)) void *dummy)
 288 {
 289         lsi_main_loop();
 290         return 0;
 291 }
 292
 293 /* display usage */
 294 static void
 295 lsi_usage(const char *prgname)
 296 {
 297         printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
 298                 "  -p PORTMASK: hexadecimal bitmask of ports to configure\n"
 299                 "  -q NQ: number of queue (=ports) per lcore (default is 1)\n"
 300                 "  -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n",
 301                         prgname);
 302 }
 303
 304 static int
 305 lsi_parse_portmask(const char *portmask)
 306 {
 307         char *end = NULL;
 308         unsigned long pm;
 309
 310         /* parse hexadecimal string */
 311         pm = strtoul(portmask, &end, 16);
 312         if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
 313                 return -1;
 314
 315         if (pm == 0)
 316                 return -1;
 317
 318         return pm;
 319 }
 320
 321 static unsigned int
 322 lsi_parse_nqueue(const char *q_arg)
 323 {
 324         char *end = NULL;
 325         unsigned long n;
 326
 327         /* parse hexadecimal string */
 328         n = strtoul(q_arg, &end, 10);
 329         if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
 330                 return 0;
 331         if (n == 0)
 332                 return 0;
 333         if (n >= MAX_RX_QUEUE_PER_LCORE)
 334                 return 0;
 335
 336         return n;
 337 }
 338
 339 static int
 340 lsi_parse_timer_period(const char *q_arg)
 341 {
 342         char *end = NULL;
 343         int n;
 344
 345         /* parse number string */
 346         n = strtol(q_arg, &end, 10);
 347         if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
 348                 return -1;
 349         if (n >= MAX_TIMER_PERIOD)
 350                 return -1;
 351
 352         return n;
 353 }
 354
 355 /* Parse the argument given in the command line of the application */
 356 static int
 357 lsi_parse_args(int argc, char **argv)
 358 {
 359         int opt, ret;
 360         char **argvopt;
 361         int option_index;
 362         char *prgname = argv[0];
 363         static struct option lgopts[] = {
 364                 {NULL, 0, 0, 0}
 365         };
 366
 367         argvopt = argv;
 368
 369         while ((opt = getopt_long(argc, argvopt, "p:q:T:",
 370                                   lgopts, &option_index)) != EOF) {
 371
 372                 switch (opt) {
 373                 /* portmask */
 374                 case 'p':
 375                         lsi_enabled_port_mask = lsi_parse_portmask(optarg);
 376                         if (lsi_enabled_port_mask == 0) {
 377                                 printf("invalid portmask\n");
 378                                 lsi_usage(prgname);
 379                                 return -1;
 380                         }
 381                         break;
 382
 383                 /* nqueue */
 384                 case 'q':
 385                         lsi_rx_queue_per_lcore = lsi_parse_nqueue(optarg);
 386                         if (lsi_rx_queue_per_lcore == 0) {
 387                                 printf("invalid queue number\n");
 388                                 lsi_usage(prgname);
 389                                 return -1;
 390                         }
 391                         break;
 392
 393                 /* timer period */
 394                 case 'T':
 395                         timer_period = lsi_parse_timer_period(optarg) * 1000 * TIMER_MILLISECOND;
 396                         if (timer_period < 0) {
 397                                 printf("invalid timer period\n");
 398                                 lsi_usage(prgname);
 399                                 return -1;
 400                         }
 401                         break;
 402
 403                 /* long options */
 404                 case 0:
 405                         lsi_usage(prgname);
 406                         return -1;
 407
 408                 default:
 409                         lsi_usage(prgname);
 410                         return -1;
 411                 }
 412         }
 413
 414         if (optind >= 0)
 415                 argv[optind-1] = prgname;
 416
 417         ret = optind-1;
 418         optind = 1; /* reset getopt lib */
 419         return ret;
 420 }
 421
 422 /**
 423  * It will be called as the callback for specified port after a LSI interrupt
 424  * has been fully handled. This callback needs to be implemented carefully as
 425  * it will be called in the interrupt host thread which is different from the
 426  * application main thread.
 427  *
 428  * @param port_id
 429  *  Port id.
 430  * @param type
 431  *  event type.
 432  * @param param
 433  *  Pointer to(address of) the parameters.
 434  *
 435  * @return
 436  *  int.
 437  */
 438 static int
 439 lsi_event_callback(uint16_t port_id, enum rte_eth_event_type type, void *param,
 440                     void *ret_param)
 441 {
 442         struct rte_eth_link link;
 443
 444         RTE_SET_USED(param);
 445         RTE_SET_USED(ret_param);
 446
 447         printf("\n\nIn registered callback...\n");
 448         printf("Event type: %s\n", type == RTE_ETH_EVENT_INTR_LSC ? "LSC interrupt" : "unknown event");
 449         rte_eth_link_get_nowait(port_id, &link);
 450         if (link.link_status) {
 451                 printf("Port %d Link Up - speed %u Mbps - %s\n\n",
 452                                 port_id, (unsigned)link.link_speed,
 453                         (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
 454                                 ("full-duplex") : ("half-duplex"));
 455         } else
 456                 printf("Port %d Link Down\n\n", port_id);
 457
 458         return 0;
 459 }
 460
 461 /* Check the link status of all ports in up to 9s, and print them finally */
 462 static void
 463 check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
 464 {
 465 #define CHECK_INTERVAL 100 /* 100ms */
 466 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
 467         uint8_t count, all_ports_up, print_flag = 0;
 468         uint16_t portid;
 469         struct rte_eth_link link;
 470
 471         printf("\nChecking link status");
 472         fflush(stdout);
 473         for (count = 0; count <= MAX_CHECK_TIME; count++) {
 474                 all_ports_up = 1;
 475                 for (portid = 0; portid < port_num; portid++) {
 476                         if ((port_mask & (1 << portid)) == 0)
 477                                 continue;
 478                         memset(&link, 0, sizeof(link));
 479                         rte_eth_link_get_nowait(portid, &link);
 480                         /* print link status if flag set */
 481                         if (print_flag == 1) {
 482                                 if (link.link_status)
 483                                         printf(
 484                                         "Port%d Link Up. Speed %u Mbps - %s\n",
 485                                                 portid, link.link_speed,
 486                                 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
 487                                         ("full-duplex") : ("half-duplex\n"));
 488                                 else
 489                                         printf("Port %d Link Down\n", portid);
 490                                 continue;
 491                         }
 492                         /* clear all_ports_up flag if any link down */
 493                         if (link.link_status == ETH_LINK_DOWN) {
 494                                 all_ports_up = 0;
 495                                 break;
 496                         }
 497                 }
 498                 /* after finally printing all link status, get out */
 499                 if (print_flag == 1)
 500                         break;
 501
 502                 if (all_ports_up == 0) {
 503                         printf(".");
 504                         fflush(stdout);
 505                         rte_delay_ms(CHECK_INTERVAL);
 506                 }
 507
 508                 /* set the print_flag if all ports up or timeout */
 509                 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
 510                         print_flag = 1;
 511                         printf("done\n");
 512                 }
 513         }
 514 }
 515
 516 int
 517 main(int argc, char **argv)
 518 {
 519         struct lcore_queue_conf *qconf;
 520         int ret;
 521         uint16_t nb_ports;
 522         uint16_t portid, portid_last = 0;
 523         unsigned lcore_id, rx_lcore_id;
 524         unsigned nb_ports_in_mask = 0;
 525
 526         /* init EAL */
 527         ret = rte_eal_init(argc, argv);
 528         if (ret < 0)
 529                 rte_exit(EXIT_FAILURE, "rte_eal_init failed");
 530         argc -= ret;
 531         argv += ret;
 532
 533         /* parse application arguments (after the EAL ones) */
 534         ret = lsi_parse_args(argc, argv);
 535         if (ret < 0)
 536                 rte_exit(EXIT_FAILURE, "Invalid arguments");
 537
 538         /* create the mbuf pool */
 539         lsi_pktmbuf_pool =
 540                 rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32, 0,
 541                         RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
 542         if (lsi_pktmbuf_pool == NULL)
 543                 rte_panic("Cannot init mbuf pool\n");
 544
 545         nb_ports = rte_eth_dev_count();
 546         if (nb_ports == 0)
 547                 rte_panic("No Ethernet port - bye\n");
 548
 549         /*
 550          * Each logical core is assigned a dedicated TX queue on each port.
 551          */
 552         for (portid = 0; portid < nb_ports; portid++) {
 553                 /* skip ports that are not enabled */
 554                 if ((lsi_enabled_port_mask & (1 << portid)) == 0)
 555                         continue;
 556
 557                 /* save the destination port id */
 558                 if (nb_ports_in_mask % 2) {
 559                         lsi_dst_ports[portid] = portid_last;
 560                         lsi_dst_ports[portid_last] = portid;
 561                 }
 562                 else
 563                         portid_last = portid;
 564
 565                 nb_ports_in_mask++;
 566         }
 567         if (nb_ports_in_mask < 2 || nb_ports_in_mask % 2)
 568                 rte_exit(EXIT_FAILURE, "Current enabled port number is %u, "
 569                                 "but it should be even and at least 2\n",
 570                                 nb_ports_in_mask);
 571
 572         rx_lcore_id = 0;
 573         qconf = &lcore_queue_conf[rx_lcore_id];
 574
 575         /* Initialize the port/queue configuration of each logical core */
 576         for (portid = 0; portid < nb_ports; portid++) {
 577                 /* skip ports that are not enabled */
 578                 if ((lsi_enabled_port_mask & (1 << portid)) == 0)
 579                         continue;
 580
 581                 /* get the lcore_id for this port */
 582                 while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
 583                        lcore_queue_conf[rx_lcore_id].n_rx_port ==
 584                        lsi_rx_queue_per_lcore) {
 585
 586                         rx_lcore_id++;
 587                         if (rx_lcore_id >= RTE_MAX_LCORE)
 588                                 rte_exit(EXIT_FAILURE, "Not enough cores\n");
 589                 }
 590                 if (qconf != &lcore_queue_conf[rx_lcore_id])
 591                         /* Assigned a new logical core in the loop above. */
 592                         qconf = &lcore_queue_conf[rx_lcore_id];
 593
 594                 qconf->rx_port_list[qconf->n_rx_port] = portid;
 595                 qconf->n_rx_port++;
 596                 printf("Lcore %u: RX port %u\n",rx_lcore_id, (unsigned) portid);
 597         }
 598
 599         /* Initialise each port */
 600         for (portid = 0; portid < nb_ports; portid++) {
 601                 struct rte_eth_rxconf rxq_conf;
 602                 struct rte_eth_txconf txq_conf;
 603                 struct rte_eth_conf local_port_conf = port_conf;
 604                 struct rte_eth_dev_info dev_info;
 605
 606                 /* skip ports that are not enabled */
 607                 if ((lsi_enabled_port_mask & (1 << portid)) == 0) {
 608                         printf("Skipping disabled port %u\n", (unsigned) portid);
 609                         continue;
 610                 }
 611                 /* init port */
 612                 printf("Initializing port %u... ", (unsigned) portid);
 613                 fflush(stdout);
 614                 rte_eth_dev_info_get(portid, &dev_info);
 615                 if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
 616                         local_port_conf.txmode.offloads |=
 617                                 DEV_TX_OFFLOAD_MBUF_FAST_FREE;
 618                 ret = rte_eth_dev_configure(portid, 1, 1, &local_port_conf);
 619                 if (ret < 0)
 620                         rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%u\n",
 621                                   ret, (unsigned) portid);
 622
 623                 ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
 624                                                        &nb_txd);
 625                 if (ret < 0)
 626                         rte_exit(EXIT_FAILURE,
 627                                  "rte_eth_dev_adjust_nb_rx_tx_desc: err=%d, port=%u\n",
 628                                  ret, (unsigned) portid);
 629
 630                 /* register lsi interrupt callback, need to be after
 631                  * rte_eth_dev_configure(). if (intr_conf.lsc == 0), no
 632                  * lsc interrupt will be present, and below callback to
 633                  * be registered will never be called.
 634                  */
 635                 rte_eth_dev_callback_register(portid,
 636                         RTE_ETH_EVENT_INTR_LSC, lsi_event_callback, NULL);
 637
 638                 rte_eth_macaddr_get(portid,
 639                                     &lsi_ports_eth_addr[portid]);
 640
 641                 /* init one RX queue */
 642                 fflush(stdout);
 643                 rxq_conf = dev_info.default_rxconf;
 644                 rxq_conf.offloads = local_port_conf.rxmode.offloads;
 645                 ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
 646                                              rte_eth_dev_socket_id(portid),
 647                                              &rxq_conf,
 648                                              lsi_pktmbuf_pool);
 649                 if (ret < 0)
 650                         rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: err=%d, port=%u\n",
 651                                   ret, (unsigned) portid);
 652
 653                 /* init one TX queue logical core on each port */
 654                 fflush(stdout);
 655                 txq_conf = dev_info.default_txconf;
 656                 txq_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
 657                 txq_conf.offloads = local_port_conf.txmode.offloads;
 658                 ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
 659                                 rte_eth_dev_socket_id(portid),
 660                                 &txq_conf);
 661                 if (ret < 0)
 662                         rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d,port=%u\n",
 663                                   ret, (unsigned) portid);
 664
 665                 /* Initialize TX buffers */
 666                 tx_buffer[portid] = rte_zmalloc_socket("tx_buffer",
 667                                 RTE_ETH_TX_BUFFER_SIZE(MAX_PKT_BURST), 0,
 668                                 rte_eth_dev_socket_id(portid));
 669                 if (tx_buffer[portid] == NULL)
 670                         rte_exit(EXIT_FAILURE, "Cannot allocate buffer for tx on port %u\n",
 671                                         (unsigned) portid);
 672
 673                 rte_eth_tx_buffer_init(tx_buffer[portid], MAX_PKT_BURST);
 674
 675                 ret = rte_eth_tx_buffer_set_err_callback(tx_buffer[portid],
 676                                 rte_eth_tx_buffer_count_callback,
 677                                 &port_statistics[portid].dropped);
 678                 if (ret < 0)
 679                         rte_exit(EXIT_FAILURE, "Cannot set error callback for "
 680                                         "tx buffer on port %u\n", (unsigned) portid);
 681
 682                 /* Start device */
 683                 ret = rte_eth_dev_start(portid);
 684                 if (ret < 0)
 685                         rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%u\n",
 686                                   ret, (unsigned) portid);
 687                 printf("done:\n");
 688
 689                 rte_eth_promiscuous_enable(portid);
 690
 691                 printf("Port %u, MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
 692                                 (unsigned) portid,
 693                                 lsi_ports_eth_addr[portid].addr_bytes[0],
 694                                 lsi_ports_eth_addr[portid].addr_bytes[1],
 695                                 lsi_ports_eth_addr[portid].addr_bytes[2],
 696                                 lsi_ports_eth_addr[portid].addr_bytes[3],
 697                                 lsi_ports_eth_addr[portid].addr_bytes[4],
 698                                 lsi_ports_eth_addr[portid].addr_bytes[5]);
 699
 700                 /* initialize port stats */
 701                 memset(&port_statistics, 0, sizeof(port_statistics));
 702         }
 703
 704         check_all_ports_link_status(nb_ports, lsi_enabled_port_mask);
 705
 706         /* launch per-lcore init on every lcore */
 707         rte_eal_mp_remote_launch(lsi_launch_one_lcore, NULL, CALL_MASTER);
 708         RTE_LCORE_FOREACH_SLAVE(lcore_id) {
 709                 if (rte_eal_wait_lcore(lcore_id) < 0)
 710                         return -1;
 711         }
 712
 713         return 0;
 714 }