New upstream version 18.11-rc1
[deb_dpdk.git] / lib / librte_eal / linuxapp / eal / eal_timer.c
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright(c) 2010-2014 Intel Corporation.
3  * Copyright(c) 2012-2013 6WIND S.A.
4  */
5
6 #include <string.h>
7 #include <stdlib.h>
8 #include <stdio.h>
9 #include <stdint.h>
10 #include <unistd.h>
11 #include <fcntl.h>
12 #include <inttypes.h>
13 #include <sys/mman.h>
14 #include <sys/queue.h>
15 #include <pthread.h>
16 #include <errno.h>
17
18 #include <rte_common.h>
19 #include <rte_log.h>
20 #include <rte_cycles.h>
21 #include <rte_lcore.h>
22 #include <rte_memory.h>
23 #include <rte_eal.h>
24 #include <rte_debug.h>
25
26 #include "eal_private.h"
27 #include "eal_internal_cfg.h"
28
29 enum timer_source eal_timer_source = EAL_TIMER_HPET;
30
31 #ifdef RTE_LIBEAL_USE_HPET
32
33 #define DEV_HPET "/dev/hpet"
34
35 /* Maximum number of counters. */
36 #define HPET_TIMER_NUM 3
37
38 /* General capabilities register */
39 #define CLK_PERIOD_SHIFT     32 /* Clock period shift. */
40 #define CLK_PERIOD_MASK      0xffffffff00000000ULL /* Clock period mask. */
41
42 /**
43  * HPET timer registers. From the Intel IA-PC HPET (High Precision Event
44  * Timers) Specification.
45  */
46 struct eal_hpet_regs {
47         /* Memory-mapped, software visible registers */
48         uint64_t capabilities;      /**< RO General Capabilities Register. */
49         uint64_t reserved0;         /**< Reserved for future use. */
50         uint64_t config;            /**< RW General Configuration Register. */
51         uint64_t reserved1;         /**< Reserved for future use. */
52         uint64_t isr;               /**< RW Clear General Interrupt Status. */
53         uint64_t reserved2[25];     /**< Reserved for future use. */
54         union {
55                 uint64_t counter;   /**< RW Main Counter Value Register. */
56                 struct {
57                         uint32_t counter_l; /**< RW Main Counter Low. */
58                         uint32_t counter_h; /**< RW Main Counter High. */
59                 };
60         };
61         uint64_t reserved3;         /**< Reserved for future use. */
62         struct {
63                 uint64_t config;    /**< RW Timer Config and Capability Reg. */
64                 uint64_t comp;      /**< RW Timer Comparator Value Register. */
65                 uint64_t fsb;       /**< RW FSB Interrupt Route Register. */
66                 uint64_t reserved4; /**< Reserved for future use. */
67         } timers[HPET_TIMER_NUM]; /**< Set of HPET timers. */
68 };
69
70 /* Mmap'd hpet registers */
71 static volatile struct eal_hpet_regs *eal_hpet = NULL;
72
73 /* Period at which the HPET counter increments in
74  * femtoseconds (10^-15 seconds). */
75 static uint32_t eal_hpet_resolution_fs = 0;
76
77 /* Frequency of the HPET counter in Hz */
78 static uint64_t eal_hpet_resolution_hz = 0;
79
80 /* Incremented 4 times during one 32bits hpet full count */
81 static uint32_t eal_hpet_msb;
82
83 static pthread_t msb_inc_thread_id;
84
85 /*
86  * This function runs on a specific thread to update a global variable
87  * containing used to process MSB of the HPET (unfortunately, we need
88  * this because hpet is 32 bits by default under linux).
89  */
90 static void *
91 hpet_msb_inc(__attribute__((unused)) void *arg)
92 {
93         uint32_t t;
94
95         while (1) {
96                 t = (eal_hpet->counter_l >> 30);
97                 if (t != (eal_hpet_msb & 3))
98                         eal_hpet_msb ++;
99                 sleep(10);
100         }
101         return NULL;
102 }
103
104 uint64_t
105 rte_get_hpet_hz(void)
106 {
107         if(internal_config.no_hpet)
108                 rte_panic("Error, HPET called, but no HPET present\n");
109
110         return eal_hpet_resolution_hz;
111 }
112
113 uint64_t
114 rte_get_hpet_cycles(void)
115 {
116         uint32_t t, msb;
117         uint64_t ret;
118
119         if(internal_config.no_hpet)
120                 rte_panic("Error, HPET called, but no HPET present\n");
121
122         t = eal_hpet->counter_l;
123         msb = eal_hpet_msb;
124         ret = (msb + 2 - (t >> 30)) / 4;
125         ret <<= 32;
126         ret += t;
127         return ret;
128 }
129
130 #endif
131
132 #ifdef RTE_LIBEAL_USE_HPET
133 /*
134  * Open and mmap /dev/hpet (high precision event timer) that will
135  * provide our time reference.
136  */
137 int
138 rte_eal_hpet_init(int make_default)
139 {
140         int fd, ret;
141
142         if (internal_config.no_hpet) {
143                 RTE_LOG(NOTICE, EAL, "HPET is disabled\n");
144                 return -1;
145         }
146
147         fd = open(DEV_HPET, O_RDONLY);
148         if (fd < 0) {
149                 RTE_LOG(ERR, EAL, "ERROR: Cannot open "DEV_HPET": %s!\n",
150                         strerror(errno));
151                 internal_config.no_hpet = 1;
152                 return -1;
153         }
154         eal_hpet = mmap(NULL, 1024, PROT_READ, MAP_SHARED, fd, 0);
155         if (eal_hpet == MAP_FAILED) {
156                 RTE_LOG(ERR, EAL, "ERROR: Cannot mmap "DEV_HPET"!\n"
157                                 "Please enable CONFIG_HPET_MMAP in your kernel configuration "
158                                 "to allow HPET support.\n"
159                                 "To run without using HPET, set CONFIG_RTE_LIBEAL_USE_HPET=n "
160                                 "in your build configuration or use '--no-hpet' EAL flag.\n");
161                 close(fd);
162                 internal_config.no_hpet = 1;
163                 return -1;
164         }
165         close(fd);
166
167         eal_hpet_resolution_fs = (uint32_t)((eal_hpet->capabilities &
168                                         CLK_PERIOD_MASK) >>
169                                         CLK_PERIOD_SHIFT);
170
171         eal_hpet_resolution_hz = (1000ULL*1000ULL*1000ULL*1000ULL*1000ULL) /
172                 (uint64_t)eal_hpet_resolution_fs;
173
174         RTE_LOG(INFO, EAL, "HPET frequency is ~%"PRIu64" kHz\n",
175                         eal_hpet_resolution_hz/1000);
176
177         eal_hpet_msb = (eal_hpet->counter_l >> 30);
178
179         /* create a thread that will increment a global variable for
180          * msb (hpet is 32 bits by default under linux) */
181         ret = rte_ctrl_thread_create(&msb_inc_thread_id, "hpet-msb-inc", NULL,
182                                      hpet_msb_inc, NULL);
183         if (ret != 0) {
184                 RTE_LOG(ERR, EAL, "ERROR: Cannot create HPET timer thread!\n");
185                 internal_config.no_hpet = 1;
186                 return -1;
187         }
188
189         if (make_default)
190                 eal_timer_source = EAL_TIMER_HPET;
191         return 0;
192 }
193 #endif
194
195 static void
196 check_tsc_flags(void)
197 {
198         char line[512];
199         FILE *stream;
200
201         stream = fopen("/proc/cpuinfo", "r");
202         if (!stream) {
203                 RTE_LOG(WARNING, EAL, "WARNING: Unable to open /proc/cpuinfo\n");
204                 return;
205         }
206
207         while (fgets(line, sizeof line, stream)) {
208                 char *constant_tsc;
209                 char *nonstop_tsc;
210
211                 if (strncmp(line, "flags", 5) != 0)
212                         continue;
213
214                 constant_tsc = strstr(line, "constant_tsc");
215                 nonstop_tsc = strstr(line, "nonstop_tsc");
216                 if (!constant_tsc || !nonstop_tsc)
217                         RTE_LOG(WARNING, EAL,
218                                 "WARNING: cpu flags "
219                                 "constant_tsc=%s "
220                                 "nonstop_tsc=%s "
221                                 "-> using unreliable clock cycles !\n",
222                                 constant_tsc ? "yes":"no",
223                                 nonstop_tsc ? "yes":"no");
224                 break;
225         }
226
227         fclose(stream);
228 }
229
230 uint64_t
231 get_tsc_freq(void)
232 {
233 #ifdef CLOCK_MONOTONIC_RAW
234 #define NS_PER_SEC 1E9
235
236         struct timespec sleeptime = {.tv_nsec = NS_PER_SEC / 10 }; /* 1/10 second */
237
238         struct timespec t_start, t_end;
239         uint64_t tsc_hz;
240
241         if (clock_gettime(CLOCK_MONOTONIC_RAW, &t_start) == 0) {
242                 uint64_t ns, end, start = rte_rdtsc();
243                 nanosleep(&sleeptime,NULL);
244                 clock_gettime(CLOCK_MONOTONIC_RAW, &t_end);
245                 end = rte_rdtsc();
246                 ns = ((t_end.tv_sec - t_start.tv_sec) * NS_PER_SEC);
247                 ns += (t_end.tv_nsec - t_start.tv_nsec);
248
249                 double secs = (double)ns/NS_PER_SEC;
250                 tsc_hz = (uint64_t)((end - start)/secs);
251                 return tsc_hz;
252         }
253 #endif
254         return 0;
255 }
256
257 int
258 rte_eal_timer_init(void)
259 {
260
261         eal_timer_source = EAL_TIMER_TSC;
262
263         set_tsc_freq();
264         check_tsc_flags();
265         return 0;
266 }